Order now and secure 158 Berrys
Description
Product information "SparkFun Qwiic - GPS-RTK Board, NEO-M8P-2"
With GPS you are able to know where you are, where you are going and how to get there within 30 seconds anywhere on earth. That means the higher the accuracy, the better! GPS Real Time Kinematics (RTK) has managed to set the accuracy of their GPS modules to 25mm, so we had to put it on this board!
The SparkFun GPS-RTK board is a powerful breakout board for the NEO-M8P-2 module from u-blox. The NEO-M8P-2 is a highly accurate module for GNSS and GPS positioning solutions including RTK. With this board you will be able to know where you (or any object) are within one inch! The NEO-M8P-2 is unique in that it can be used as both a rover and a base station. By using our handy Qwiic system, no soldering is required to connect it to the rest of your system. Still, we've broken out the pins at 0.1" spacing in case you'd prefer to use a breadboard.
We've even included a rechargeable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps "warm-start" the module and drastically reduces the time to first troubleshooting. The module has a "survey-in" mode that allows the module to be used as a base station and generate RTCM 3.x correction data (unlike the previous version of the module, which cannot generate RTCM data).
The number of configuration options of the NEO-M8P-2 is incredible! Geofencing, variable I2C address, variable update rates, even the high-precision RTK solution can be increased to 4Hz. The GPS-RTK even has four communication ports: USB (which enumerates as a COM port), UART (with 3.3V TTL), I2C (via the two Qwiic connectors or broken out pins) and SPI.
We have also written an Arduino library for u-blox modules to facilitate reading and controlling the GPS-RTK via our Qwiic Connect system.
Note: The I2C address of the NEO-M8P-2 is 0x42 and is software configurable. A multiplexer/mux is required to communicate with multiple NEO-M8P-2 sensors on a single bus. If you want to use more than one NEO-M8P-2 sensor, you should use the Qwiic Mux Breakout.
Features:
Documents:
The SparkFun GPS-RTK board is a powerful breakout board for the NEO-M8P-2 module from u-blox. The NEO-M8P-2 is a highly accurate module for GNSS and GPS positioning solutions including RTK. With this board you will be able to know where you (or any object) are within one inch! The NEO-M8P-2 is unique in that it can be used as both a rover and a base station. By using our handy Qwiic system, no soldering is required to connect it to the rest of your system. Still, we've broken out the pins at 0.1" spacing in case you'd prefer to use a breadboard.
We've even included a rechargeable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps "warm-start" the module and drastically reduces the time to first troubleshooting. The module has a "survey-in" mode that allows the module to be used as a base station and generate RTCM 3.x correction data (unlike the previous version of the module, which cannot generate RTCM data).
The number of configuration options of the NEO-M8P-2 is incredible! Geofencing, variable I2C address, variable update rates, even the high-precision RTK solution can be increased to 4Hz. The GPS-RTK even has four communication ports: USB (which enumerates as a COM port), UART (with 3.3V TTL), I2C (via the two Qwiic connectors or broken out pins) and SPI.
We have also written an Arduino library for u-blox modules to facilitate reading and controlling the GPS-RTK via our Qwiic Connect system.
Note: The I2C address of the NEO-M8P-2 is 0x42 and is software configurable. A multiplexer/mux is required to communicate with multiple NEO-M8P-2 sensors on a single bus. If you want to use more than one NEO-M8P-2 sensor, you should use the Qwiic Mux Breakout.
Features:
- Voltage: 5V or 3.3V but all logic is 3.3V
- Current: ~35mA (varies with constellations and tracking status)
- Time to first fix: 29s (cold), 1s (hot)
- Max navigation rate
- PVT (basic localisation via UBX binary protocol) - 10Hz
- RTK - 5Hz
- RTK with moving baseline - 4Hz
- Raw - 10Hz
- Horizontal position accuracy
- 2.5m without RTK
- 0.025m with RTK
- 2x Qwiic connector
- Weight: 6.3g
- Dimensions: 40.6mm x 33mm (1.6in x 1.3in)
Documents:
- Get Started With the SparkFun GPS-RTK Board Guide
- Wiring Diagram
- Eagle files
- Connection Guide
- What is GPS RTK?
- Datasheet (NEO-M8P-2)
- Product overview (NEO-M8P)
- Hardware integration manual (NEO-M8P)
- Receiver description (u-blox 8 / M8)
- u-blox ECCN
- Example RTCM output
- Arduino library
- GitHub
Properties
| Zolltarifnummer: | 84733020 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| Gross Weight (kg): | 0.007 |
| Manufacturer ID: | GPS-15005 |
| Product ID: | GPS-15005 |
Video
Manufacturer and safety information
Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before commissioning the GPS/GNSS module, check all connections carefully to avoid short circuits.
- Protect the device from moisture, extreme temperatures and other environmental influences.
- Only use with the specified operating voltage and the specified components.
- During installation, ensure that the antenna has a clear view of the sky to guarantee optimum signal quality.
- Handle components with care to avoid damage caused by electrostatic discharge (ESD).
- Do not use in the vicinity of strong magnetic or electromagnetic fields.
- At the end of its service life, dispose of it in an environmentally friendly manner and in accordance with local regulations.
- Do not dispose of electronic components with household waste, but take them to an appropriate collection point.
Reviews
1
Login
1 review
2 May 2021 00:00
Genau das richtige für meine Z...
Genau das richtige für meine Zwecke!