Close filters

Filter

 
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

seeed Grove System

1 2 ... 8
No results were found for the filter!
Der Grove - Ultraschall-Abstandssensor ist ein Ultraschallwandler, der Ultraschallwellen zur Abstandsmessung nutzt. Er kann von 3 cm bis 350 cm mit einer Genauigkeit von bis zu 2 mm messen.
Article no.: SE-101020010
4.03€
incl. tax plus shipping costs
Available immediately
145 piece
· 2 - 4 working days
Grove - DHT11 Temperature & Humidity Sensor is a high quality, low-cost digital temperature, and humidity sensor based on the DHT11 module.
Article no.: SE-101020011
6.05€
incl. tax plus shipping costs
Available immediately
108 piece
· 2 - 4 working days
LED Matrix is low cost and usually used to display simple numbers and images. The Grove - LED Matrix Driver is the I2C based product which allows you to control the LED matrix with our prepared and easy-to-use libraries, or you can create your own library to control it to satisfy your need. The 8*8 LED Matrix can be assembled and unassembled from the driver board easily, so it is convenient to change different color LED matrix display based on your need.
Article no.: SE-105020074
7.66€
incl. tax plus shipping costs
Available immediately
90 piece
· 2 - 4 working days
SWhat does P mean?
P is for panel mount in this product
Article no.: SE-101020004
3.03€
incl. tax plus shipping costs
Available immediately
84 piece
· 2 - 4 working days
The video shows how to recognize different colors with the sensor and then to drive the lamp lighting in blue, green, yellow, orange and red accordingly
Article no.: SE-101020341
8.97€
incl. tax plus shipping costs
Available immediately
79 piece
· 2 - 4 working days
Dieses Grove LED Set enthält 4 verschiedene LEDs in den Farben rot, grün, blau und weiß. Die LED kann einfach auf das Board gesteckt werden. Über ein Potentiometer kann die die Leuchtkraft der LED geregelt werden.
Article no.: SE-104020228
2.12€
incl. tax plus shipping costs
Available immediately
77 piece
· 2 - 4 working days
Find setting up an amplifier IC on the breadboard a troublesome and totally no-need-to-repeat job? This Grove module can save you clutter to settle up such an IC by integrating the whole operating circuit
Article no.: SE-103020016
10.99€
incl. tax plus shipping costs
Available immediately
77 piece
· 2 - 4 working days
Grove - 16x2 LCD (White on Blue) for Arduino and Raspberry pi
Article no.: SE-104020111
6.15€
incl. tax plus shipping costs
Available immediately
76 piece
· 2 - 4 working days
The Servo motor is a rotary actuator that allows for precise control of angular position which makes them suitable for use in closed-loop systems where precise position control is needed and is commonly used in electronics. Grove - Servo is a bonus product for Grove lovers as we regulated the three-wire servo into a Grove standard connecter. You can plug and play it as a typical Grove module now, without jumper wires clutter. 
Article no.: SE-316010005
7.26€
incl. tax plus shipping costs
Available immediately
75 piece
· 2 - 4 working days
Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume over 85 dB and is integrated with Grove interface, which makes it easy to connect and experiment by just plug & play. It is a perfect add-on for all kinds of Arduino projects and human-machine interfaces.
Article no.: SE-107020000
1.92€
incl. tax plus shipping costs
Available immediately
73 piece
· 2 - 4 working days
What does P mean?
P is for panel mount in this product
Article no.: SE-111020000
2.42€
incl. tax plus shipping costs
Available immediately
68 piece
· 2 - 4 working days
Grove Compatible 5V/3.3V Compatible Analog Output
Article no.: SE-101020028
6.05€
incl. tax plus shipping costs
Available immediately
63 piece
· 2 - 4 working days
This is a breadboard sized in 35*47*8.5mm with metal strips underneath the board and then connect the holes on the top of the board. There is also a Grove connector on the board to allow you to build your very own Grove ? module, and therefore will take you to a new level of creativity!  
Article no.: SE-103020232
4.13€
incl. tax plus shipping costs
Available immediately
62 piece
· 2 - 4 working days
Das Grove Shield für Pi Pico v1.0 ist ein Plug-and-Play-Shield für Raspberry Pi Pico, das verschiedene Arten von Grove-Anschlüssen integriert, darunter 2*I2C, 3*Analog, 2*UART, 3*Digital-Ports, SWD-Debug-Schnittstelle und SPI-Pin, 3,3v/5v wählbarer Stromschalter. Es ermöglicht den Aufbau von Prototypen und Projekten auf einfache und schnelle Weise ohne Jumper-Draht und Breadboard, Sie könnten unendliche Möglichkeiten des Picos erforschen. Das Shield-Board ist eine stapelbare Zusatzplatine, die als Brücke für den Pi Pico und das Grove-System von Seeed dient.
Article no.: SE-103100142
4.34€
incl. tax plus shipping costs
Available immediately
51 piece
· 2 - 4 working days
Grove Relay can handle the current up to 5A at 250VAC for long periods of time. When the relay is switched on, the LED will light up and the relay will allow current to flow. The peak voltage capability is 250V at 10A.
Article no.: SE-103020005
3.03€
incl. tax plus shipping costs
Available immediately
51 piece
· 2 - 4 working days
Grove - NFC Tag is a highly integrated Near Field Communication Tag module,this module is I2C interface,which base on M24LR64E-R,M24LR64E-R have a 64-bit unique identifier and 64 -Kbit EEPROM
Article no.: SE-101020070
21.48€
incl. tax plus shipping costs
Available immediately
48 piece
· 2 - 4 working days
Der Grove Wasserstandssensor ist ein sehr genauer Sensor, der bei Anwendungen zur Wasserstandserfassung hilfreich sein kann. Er ist vollständig wasserdicht und verwendet kapazitive Pads, um Wasserstände bis zu 10 cm zu erkennen.
Article no.: SE-101020635
7.87€
incl. tax plus shipping costs
Available immediately
48 piece
· 2 - 4 working days
Als neue Version hat das Grove - OLED Display 0.66" (SSD1306) einen kleineren Bildschirm im Vergleich zu anderen OLED (Organic Light Emitting Diode) Displays wie dem Grove - OLED Display 0.96" (SSD1315). Dennoch kann es eine Auflösung von 64×48 Pixeln darstellen und bietet die gleichen Leistungsmerkmale wie die anderen Displays, z. B. eine hohe Helligkeit, einen geringen Stromverbrauch und eine Grove-Schnittstelle auf der Rückseite usw.
Article no.: SE-104020248
5.85€
incl. tax plus shipping costs
Available immediately
45 piece
· 2 - 4 working days
Grove ? High Precision RTC is a more accurate real-time-clock comparing to Grove ? RTC with the regular clock chip DS1307. The heart of Grove ? High Precision RTC is PHILIPS PCF85063TP, which is a CMOS chip that optimized for low power consumption, the typical current can be less than 1.2uA at certain environment.
Article no.: SE-102020083
8.87€
incl. tax plus shipping costs
Available immediately
45 piece
· 2 - 4 working days
Diese Kabel, verbinden alle Grove Komponenten schnell und sicher.
Article no.: SE-110990031
3.03€
incl. tax plus shipping costs
Available immediately
41 piece
· 2 - 4 working days
Grove - I2C Hub (6 Port) is an I2C expansion interface board, compared with the old Grove - I2C Hub, the same size, two more connectors, almost half the price!
Article no.: SE-103020272
1.82€
incl. tax plus shipping costs
Available immediately
39 piece
· 2 - 4 working days
4 digit red alpha-numeric display Grove compatible 8 adjustable luminance levels
Article no.: SE-104030003
6.05€
incl. tax plus shipping costs
Available immediately
37 piece
· 2 - 4 working days
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. It offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight. Suitable for your Raspberry Pi weather station or smart irrigation system using Arduino if you need to monitor the visible spectrum.
Article no.: SE-101020089
10.18€
incl. tax plus shipping costs
Available immediately
36 piece
· 2 - 4 working days
The Grove - Light Sensor v1.2 is an analog module and can output various electrical signals which can be converted to different ranges. It integrates LS06-S photoresistor, a high-sensitive and reliable photodiode, to detect the intensity of light in the environment. It is a perfect Arduino light sensor module for light measurement, light detection, and light-controlled switch.
Article no.: SE-101020132
3.03€
incl. tax plus shipping costs
Available immediately
32 piece
· 2 - 4 working days
Grove compatible interface 3.5mm pitch pin Accept 30 to 20AWG wire
Article no.: SE-103020007
3.03€
incl. tax plus shipping costs
Available immediately
30 piece
· 2 - 4 working days
Proto shield provides a way for you to connect with Arduino and Breadboard to fast build and verify your prototypes. Grove - Proto Shield for Arduino allows you to add your own circuitry or components to your Grove system prototypes. You can access all four lines from the connector cable: S0, S1, VCC, and GND.
Article no.: SE-101020035
1.92€
incl. tax plus shipping costs
Available immediately
30 piece
· 2 - 4 working days
Grove compatible interface Wide supply voltage range Built-in signal filtering
Article no.: SE-101020063
6.05€
incl. tax plus shipping costs
Available immediately
30 piece
· 2 - 4 working days
This includes a Grove & Qwiic/STEMMA QT Interface to male jumper cable and female jumper cable in order to connect multiple Grove, Qwiic and STEMMA modules to development boards using one cable via the I2C Interface
Article no.: SE-114992154
2.92€
incl. tax plus shipping costs
Available immediately
30 piece
· 2 - 4 working days
Low power consumption Wide power supply range: DC 3~5V Convenient to use High sensitivity
Article no.: SE-101020033
13.31€
incl. tax plus shipping costs
Available immediately
29 piece
· 2 - 4 working days
Upgraded edition of BPM180 High accuracy Easy-to-use Grove Compatible Interface Supports both I2C and SPI communication Can be used as an altimeter with accuracy of ±1 meter
Article no.: SE-101020193
15.43€
incl. tax plus shipping costs
Available immediately
29 piece
· 2 - 4 working days
Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
Article no.: SE-113020011
9.58€
incl. tax plus shipping costs
Available immediately
28 piece
· 2 - 4 working days
Grove interface compatible Plug and play
Article no.: SE-104030007
1.92€
incl. tax plus shipping costs
Available immediately
28 piece
· 2 - 4 working days
Diese Header können auf andere oder eigene Module gelötet werden und machen diese somit Kompatibel für das Grove System.
Article no.: SE-110990037
1.91€
incl. tax plus shipping costs
Available immediately
27 piece
· 2 - 4 working days
Grove LoRa-E5 embedded with LoRa-E5 STM32WLE5JC, powered by ARM Cortex M4 ultra-low-power MCU core and LoRa SX126x, is an easy-to-use wireless radio module, supporting LoRaWAN protocol on the EU868 & US915 frequency and (G)FSK, BPSK, (G)MSK, LoRa modulations.
Article no.: SE-113020091
17.34€
incl. tax plus shipping costs
Available immediately
27 piece
· 2 - 4 working days
Standard Grove connector Operate voltage: 3.3v/5v Emitting Color: White
Article no.: SE-104030009
1.92€
incl. tax plus shipping costs
Available immediately
27 piece
· 2 - 4 working days
Mit diesen Adapterkabeln können Grove Komponenten mit nahezu allen Microcontrollerboards, Einplatinencomputern oder auf Breadboards verwendet werden. Die Kabel schaffen den Übergang des Grove Standards zur Verwendung auf Standard Pinleisten / Buchsen.
Article no.: SE-110990028
3.41€
incl. tax plus shipping costs
Available immediately
26 piece
· 2 - 4 working days
1 2 ... 8

Seeed Grove: Vielseitige Module für Ihren Mini-Computer

Bei Seeed Studio Grove handelt es sich um ein moduliertes Open Source Tool Set, das Sie ohne aufwendige Vorbereitung direkt nutzen können. Der große Mehrwert liegt vor allem  in seiner einfachen Handhabung: Im Gegensatz zu vielen anderen Modulen benötigen Sie beim Seeed Grove weder ein Breadboard noch sonstige elektronische Komponenten, um mit Ihrem Projekt zu starten.

Hauptbestandteil des Grove-Systems ist das Base Shield, das – abhängig vom individuellen Vorhaben – mit einem oder mehreren zusätzlichen Modulen bestückt werden kann. Folgerichtig verfügt das Base Shield über verschiedene Microprozessoreingänge und -ausgänge. Mittlerweile gibt es von Seeed Studio gar 300 verschiedene Module, die Sie an das Base Shield Ihres Grove-Systems anschließen können. Mit jedem Modul erhalten Sie zudem einen Demo-Code und eine klar verständliche Dokumentation, damit Sie mit Ihrem Tech-Projekt gleich loslegen können.

Mit dem Grove OLED Display bietet Seeed Studio die ideale Komponente für Ihren Raspberry Pi oder Ihren Arduino. Die Vorzüge von OLED Displays gegenüber LCDs liegen auf der Hand: Bei der neuen OLED Technologie wird keinerlei Hintergrundbeleuchtung benötigt, stattdessen sorgen selbstleuchtende Pixel für das Bild. Dadurch erzielen OLEDs in puncto Kontrast, Helligkeit und Bildtiefe deutlich bessere Werte. Gleichzeitig hat die Technologie auch in Sachen Energieeffizienz die Nase vorn. Und: OLED Displays sind wesentlich dünner und leichter als LCDs. Die Fakten sprechen also klar für die neuere Bildschirm-Technologie

Zur Auswahl stehen gleich zwei hochwertige OLED Bildschirme aus dem Hause Seeed Studio. Das Grove OLED Display 0.96 inch überzeugt mit 128 x 64 Pixeln, sehr guten Helligkeits- und Kontrastwerten und einem schlanken Design. Der Bildschirm verfügt zudem über eine 4-Pin-I2C-Schnittstelle, wodurch sich das Modul problemlos mit Ihrem Mini-Computer verbinden lässt. Ein angenehmes Feature ist der große Betrachtungswinkel, der Ihnen aus verschiedensten Perspektiven beste Sicht gewährleistet.

Das etwas größere Grove OLED Display 1.12 inch wartet mit 16 Graustufen und fulminantem Kontrast auf und ist wahlweise mit einer Auflösung von 96 x 96 Pixeln (1.0) oder mit 128 x 128 Pixeln verfügbar. Auch bei diesem Bildschirm geht die Kommunikation über 4-Draht-I2C vonstatten.

Ein kleiner Tipp: Wenn Sie die Displays mit Ihrem Raspberry Pi verknüpfen möchten, benötigen Sie zusätzlich noch das Grove Base Hat, das sie für kleines Geld bei Berrybase erwerben können. Sofern Sie den OLED Bildschirm zusammen mit Ihrem Arduino nutzen wollen, müssen Sie sich noch ein Grove Base Shield beschaffen.

Sie möchten mithilfe Ihres Arduino eine Wetterstation konstruieren? Für dieses Vorhaben empfiehlt sich der Seeed Grove Sensor BME280. Das Modul basiert technologisch auf dem gleichnamigen Sensor der Marke Bosch und eignet sich perfekt als präziser und günstiger Umgebungssensor. Temperatur (zwischen -40 und 85°C), Luftdruck (300 bis 1100 hPa) und Luftfeuchtigkeit lassen sich mit dem Gerät zuverlässig messen. Die Kommunikation erfolgt via I2C oder auch via SPI. Dank der genauen Druckmessung ist der Sensor außerdem in der Lage, die Höhe zu messen. Dabei arbeitet das Produkt schnell und ist gleichzeitig sparsam, was die Energie angeht. Eine Dokumentation, die Ihnen detailliert erklärt, wie Sie das Modul mit Ihrem Arduino verknüpfen, erhalten Sie kostenlos von Seeed Studio. In jedem Fall benötigen Sie für das Projekt jedoch das Grove Base Shield.

Wenn Sie ein Projekt umsetzen möchten, bei dem Sie unter Verwendung Ihres Arduino einen Schritt- oder Gleichstrommotor steuern müssen, ist der Grove I2C Motor Driver genau die richtige Komponente. Denn das leistungsstarke Modul ist dazu imstande, zwei bürstenbehaftete Gleichstrommotoren oder auch einen 4-Draht-Zweiphasen-Schrittmotor anzutreiben. Dank seines zweikanaligen H-Bridge-Treiberchips kann das Gerät Strom von bis zu 2A pro Kanal zu verarbeiten. Wichtig: Für ein reibungsloses Funktionieren ist eine Stromversorgung von 6 bis 15V erforderlich. Sämtliche Treiberleitungen sind durch Dioden gegen die gegenelektromotorische Kraft geschützt. Die Kommunikation mit dem Arduino läuft wie bei vielen anderen Grove Modulen auch hier über I2C.

Viewed

Switch to the appropriate shop now

We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.