Shadow chassis

Product number: ROB-13301

€16.60

Currently not available

Notify me when the item is available.

Privacy

By selecting continue you confirm that you have read our and accepted our .

€16.60

Shadow chassis

Order now and secure 9 Berrys

Product information "Shadow chassis"

The Shadow Chassis is a wonderfully robust and modular robot platform from RobotZone. The chassis plates and brackets are cut from ABS plastic and utilise the Actobotics 0.77" and 1.50" hub patterns for sensors, controllers, power, etc. Simply snap the individual plates together and you can connect your motors and favourite robotics controller. With the included "snap-on" microcontroller mounts, you can attach an Arduino, Raspberry Pi, SparkFun RedBoard or SparkFun RedBot mainboard! This kit even has a mounting hole for a standard size servo and a 4xAA battery holder with jack connector.

Unlike its predecessor, you don't need any additional tools for the Shadow Chassis. Everything snaps into place securely!

Note: The Shadow Chassis must be assembled. Detailed instructions can be found in the documents section below.

Components:

1x Upper chassis plate
1x Lower chassis plate
2x Front motor mount
2x Rear motor mount
4x side strut
2x Encoder bracket
2x microcontroller bracket
1x battery holder
1x line follower bracket
1x line follower mounting plate
1x nub reel
1x 4xAA battery holder

Features:

196mm L x 126mm W x 44mm H (53.25mm with nub caster)

Documents:

Zolltarifnummer:	95030000
Brand:	SparkFun
Country of Origin:	USA
EAN:	5904422332594
Gross Weight (kg):	0.175
Manufacturer ID:	ROB-13301
Product ID:	ROB-13301

Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com

WEEE number: 17968585

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions

Read the operating instructions in full before use.
Disconnect the power supply before maintenance or installation.
Only use components within the intended voltage or power range.
Protect components from moisture, extreme temperatures and dust.
Not suitable for use in safety-critical applications.
Dispose of defective components properly; dispose of electronic components as electronic waste.
Protect small parts and cables from children and unauthorised persons.
Handle sharp edges and moving parts with care, risk of injury.
Avoid static discharge during installation by earthing.
Dispose of in accordance with the applicable local regulations.