The beauty of Seeed Grove lies in the simplicity of the system offered: No soldering, everything works via plug connections. This makes it easy to build even larger projects with this open source solution. Founded in Shenzhen, China, the Seed-Studio has started its triumphal march in the world of maker / IOT and is now also convincing here in our shop. Just trying it out has never been easier.
seeed
No results were found for the filter!
Grove Shield for Seeeduino XIAO is a plug-and-play Grove extension board for Seeeduino XIAO. With the on-board battery management chip and battery bonding pad, you could easily power your Seeeduino XIAO with lithium battery and recharge it. 8 Grove connectors onboard includes two Grove IIC and one UART. It acts as a bridge for Seeeduino XIAO and Seeed's Grove system. Flash SPI bonding pad allows you add Flash to Seeeduino XIAO to expand its memory space, providing Seeeduino XIAO with more possibilities.
Article no.: SE-103020312
Article no.: SE-104030014
Article no.: SE-101020046
Article no.: SE-105020001
Article no.: SE-101020172
Article no.: SE-103020011
Article no.: SE-108020102
Article no.: SE-101020043
Article no.: SE-104020128
This Infrared Thermometer module is equipped with a single-point medical-grade infrared temperature sensor (MLX90614), which can detect the temperature of objects with an accuracy of ±0.2°C in the body temperature range. At room temperature, the surface temperature of the measured object can reach an accuracy of ±0.5°C in a wide range. The module can use the I2C protocol to obtain data from the camera. The field of view (FOV) of this sensor is 5°, the temperature measurement range is -70°C?380°C, and the working temperature is that the sensor's Ta value is between -40°~85°.
Article no.: SE-101020894
Article no.: SE-110020248
GrovePi+ ist eine Zusatzplatine mit 15 Grove 4-Pin-Schnittstellen, die Grove-Sensoren an den Raspberry Pi bringt. Es ist die neueste Version, die perfekt mit Raspberry Pi Modell B/B+/A+/2/3/4 kompatibel ist.
GrovePi+ ist ein einfach zu bedienendes und modulares System für Hardware-Hacking mit dem Raspberry Pi. Sie brauchen keine Lötarbeiten oder Breadboards: Stecken Sie Ihre Grove-Sensoren ein und beginnen Sie direkt mit der Programmierung. Grove ist eine einfach zu bedienende Sammlung von mehr als 100 kostengünstigen Plug-and-Play-Modulen, die die physikalische Welt erfassen und steuern.
GrovePi+ ist ein einfach zu bedienendes und modulares System für Hardware-Hacking mit dem Raspberry Pi. Sie brauchen keine Lötarbeiten oder Breadboards: Stecken Sie Ihre Grove-Sensoren ein und beginnen Sie direkt mit der Programmierung. Grove ist eine einfach zu bedienende Sammlung von mehr als 100 kostengünstigen Plug-and-Play-Modulen, die die physikalische Welt erfassen und steuern.
Article no.: SE-103010002
Article no.: SE-101020713
Article no.: SE-104020132
Article no.: SE-101020083
Article no.: SE-107020029
Article no.: SE-103100063
Article no.: SE-113100022
Article no.: SE-101020037
Article no.: SE-114992628
Article no.: SE-114992549
Article no.: SE-114992561
Article no.: SE-101020055
Quantum Tiny Linux Development Kit besteht aus einer Kernplatine, dem SoM (System on Module) und einer Erweiterungsplatine als Trägerplatine.
Das SoM, Quark-N, basiert auf Allwinner H3, Quad-Core Cortex-A7 und ARM Mali400 MP2 GPU. Das Trägerboard, Atom-N, führt eine Reihe von goldenen Fingerpins heraus, um I/O-Erweiterung zu realisieren, SPI, I2C, UART, GPIO und andere nützliche Schnittstellen zu erweitern.
Das Kit könnte das kleinste Linux-Entwicklungsboard auf dem Markt sein, das für Szenarien wie einen persönlichen Server, einen intelligenten Sprachassistenten und die Entwicklung von Robotern geeignet ist.
Das SoM, Quark-N, basiert auf Allwinner H3, Quad-Core Cortex-A7 und ARM Mali400 MP2 GPU. Das Trägerboard, Atom-N, führt eine Reihe von goldenen Fingerpins heraus, um I/O-Erweiterung zu realisieren, SPI, I2C, UART, GPIO und andere nützliche Schnittstellen zu erweitern.
Das Kit könnte das kleinste Linux-Entwicklungsboard auf dem Markt sein, das für Szenarien wie einen persönlichen Server, einen intelligenten Sprachassistenten und die Entwicklung von Robotern geeignet ist.
Article no.: SE-114992462
ReSpeaker 2-Mics Pi HAT ist einn Erweiterungsboard mit zwei Mikrofonen für den Raspberry Pi, die für KI- und Sprachanwendungen entwickelt wurde. Das bedeutet, dass du ein leistungsfähigere und flexiblere Sprach-Anwendungen einrichten kannst, das den Amazon Alexa Voice Service, den Google Assistant und so weiter integriert.
Article no.: RPI-RESPHAT
Das mit Arduino und MicroPython kompatible Wio Terminal ist ein ATSAMD51-basierter Mikrocontroller mit Bluetooth- und Wi-Fi-Konnektivität, der von einem Realtek RTL8720DN betrieben wird. Wio Terminal ist mehr als nur ein einzelnes eingebettetes Funktionsmodul, Wio Terminal selbst ist mit einem 2.4" LCD-Bildschirm, onboard IMU(LIS3DHTR), Mikrofon, Summer, microSD-Kartensteckplatz, Lichtsensor, Infrarotsender(IR 940nm) integriert. All diese praktischen Zusatzmodule sind in einem kompakten Gehäuse untergebracht, was es zu einem effizienten und einsatzfertigem Produkt macht.
Article no.: SE-102991299
Das Grove ORP Sensor Kit (501Z) ist ein kostengünstiger und einfach zu bedienender ORP-Sensor, der für Arduino und Raspberry Pi geeignet ist. Er unterstützt 3.3V und 5V Systeme und zeichnet sich durch eine kompakte Größe sowie eine austauschbare Sonde aus. Ideal für Projekte zur Messung von Oxidations-Reduktions-Potenzialen in aquatischen Lösungen.
Article no.: SE-110020293
Grove - Oxygen Sensor (MIX8410) is an electrochemical oxygen sensor and it can be used to test the oxygen concentration in air. Under the catalysis of the electrodes, a redox reaction occurs on the working electrode and the counter electrode, thereby generating a current. The concentration of oxygen in the air is calculated by measuring this current and referring to the oxygen concentration linear characteristic graph.
Article no.: SE-101990680
Article no.: SE-107020007
Article no.: SE-101020652
The Grove - Triple Color E-Ink Display 1.54'' is a screen that can still be displayed after power off, we call it E-Paper(electronic paper) or E-Ink. The display is a TFT active matrix electrophoretic display, with interface and a reference system design. The 1.54” active area contains 152×152 pixels, and has 1-bit white/black and 1-bit red full display capabilities.
Article no.: SE-104020129
The Grove - Triple Color E-Ink Display 2.13'' is a screen that can still be displayed after power off, we call it E-Paper(electronic paper) or E-Ink. The display is a TFT active matrix electrophoretic display, with interface and a reference system design.The 2.13 inch active area contains 212x104 pixels, and has 1-bit white/black and 1-bit red full display capabilities.
Article no.: SE-104020130
Article no.: SE-103020193
Article no.: SE-113060000
Article no.: SE-108020103
Article no.: SE-104030006
Viewed