Product number: ESPR-PICO Espruino

Espruino Pico

€26.40

Available · 41 piece · 1-3 days

Espruino Pico

€26.40

Order now and secure 53 Berrys

Product information "Espruino Pico"

A tiny USB stick that runs JavaScript - control things in the real world in just a few seconds!

The Espruino Pico is a tiny USB stick that runs JavaScript code (it doesn't need to be connected to a computer). You can program it with nothing more than a serial terminal program, but there is also an IDE that runs in the Chrome web browser. It has an editor with syntax highlighting as well as a graphical programming language.

Once you've uploaded the code, you can inspect and change variables (including functions!) while your program is running.

Features

33mm x 15mm (1.3 x 0.6 inches)
22 GPIO pins: 9 analogue inputs, 21 PWM, 2 serial, 3 SPI, 3 I2C
All GPIOs are 5 volt tolerant (Arduino compatible)
2 rows of 9 0.1" pins, with a third 0.05" row of 8 pins at the end
On-board USB type A connector
On-board LEDs and a push button.
STM32F401CDU6 32-bit 84MHz ARM Cortex M4 CPU
384kb Flash, 96kb RAM
On-board voltage regulator 3.3 V 250 mA, accepts voltages from 3.5 V to 16 V
Current consumption in sleep mode: < 0.05mA - over 2.5 years with a 2500mAh battery
On-board FET can be used to drive high current outputs
Rev 1v4: 500mA polyfuse on the board
Rev 1v4: CE and RoHS certification
Click here for the complete technical information.

Zolltarifnummer:	84733020
Brand:	Espruino
Country of Origin:	China
Gross Weight (kg):	0.007
Manufacturer ID:	ESPRUINO_PICO_PINNED
Product ID:	ESPR-PICO

Espruino

Espruino – JavaScript on the microcontroller

Espruino is a project by British developer Gordon Williams that started on Kickstarter in 2013 with an unusual idea: a microcontroller that executes JavaScript directly, with an interpreter running on the chip itself.

The practical consequence is a different way of working. Instead of writing code, compiling it and flashing it to the board, you connect to the board and type commands into a console – they execute immediately. A sensor can be read out, an output switched, a function tested, all without a build cycle. This makes debugging noticeably faster, especially when the exact behaviour of a component is still unclear.

The boards are based on ARM Cortex-M controllers, the firmware is open source, and there are ready-made libraries for common sensors and displays.

At BerryBase you will find Espruino boards for web developers, rapid prototyping and IoT projects.

Manufacturer information
Pur3 Ltd
11 High Street
GB OX14 4NB Culham, Oxfordshire, Abingdon
https://www.espruino.com
gw@pur3.co.uk

Person responsible for the EU
BerryBase GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
einkauf@sertronics.shop

Safety instructions

Avoid static discharge during handling, as the electronics are sensitive to ESD.
Do not use near water, heat sources or humid conditions.
Only operate with the recommended voltage and current, overvoltage can damage the board.
Ensure ventilation to prevent the board from overheating.
Keep contacts and connections free of dirt and foreign objects to avoid short circuits.
Do not use for direct contact with flammable materials.
Only use suitable tools and specialist knowledge for repair and maintenance work.
Dispose of in accordance with local regulations for electronic devices, recycle batteries separately.
Do not dispose of with household waste.
Separate plastic and metal components where possible and recycle.