Close filters

Filter

 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  

Soldering technology

1 2 3
No results were found for the filter!
Unentbehrlich für alle filigranen Arbeiten, bei denen beide Hände zum Arbeiten gebraucht werden, wie z. B. bei Lötarbeiten. Sechs flexibel biegsame Arme mit Krokodilklemmen halten Werkstücke oder Platinen fest. Der Standfuß aus Metall sorgt hierbei für sicheren Stand.
Article no.: FLEX-DH-1
19.06€
incl. tax plus shipping costs
Available immediately
141 piece
· 2 - 4 working days
Entlötlitze 2,0 mm
zur Entfernung von Lötmittel an Lötstellen
Article no.: 45246
1.71€
incl. tax plus shipping costs
Available immediately
124 piece
· 2 - 4 working days
Available from the manufacturer
5.949 piece ·
3 - 5 working days
Diese vielseitig einsetzbare Reparaturmatte eignet sich hervorragend zum Löten aber darüber hinaus auch für die perfekte Organisation von Bastelprojekten. Sei es der Aufbau einer Raspberry-Konfiguration oder das Reparieren des Smartphones oder anderer elektronischer oder technischer Bauteile, diese Silikonmatte bringt Ordnung in jedes Chaos. Einfach zu säubern, hitzefest bis 500°C und durch die praktischen Sortierfächer bleibt alles dort wo es soll.
Article no.: SIL-MAT-1
4.94€
incl. tax plus shipping costs
Available immediately
100 piece
· 2 - 4 working days
Available from the manufacturer
300 piece ·
3 - 5 working days
Löthilfe 3.Hand mit Lupe
die ideale Hilfe für alle filigranen Lötarbeiten
Article no.: 51199
5.44€
incl. tax plus shipping costs
Available immediately
63 piece
· 2 - 4 working days
Available from the manufacturer
838 piece ·
3 - 5 working days
Dieses Gel-Flussmittel ist ein verdichtetes Flussmittel der RMA- Klasse für die SMT- Montage und Reparaturen. Das Gel kann durch Sieb, Schablone oder mittels Spritze aufgetragen werden. Durch die für die Herstellung vom Flussmittel eingesetzten Aktivatoren ist es möglich, dass die vorhandenen Lötreste auf der Platine gelassen werden können (wenn die Herstellung keine Reinigungsphase berücksichtigt).
Article no.: AGT-047
2.92€
incl. tax plus shipping costs
Available immediately
61 piece
· 2 - 4 working days
Platinenhalter
robuster Lötstander zur Befestigung von Platinen bei Löt- und Bastelarbeiten
Article no.: 51220
7.94€
incl. tax plus shipping costs
Available immediately
59 piece
· 2 - 4 working days
Available from the manufacturer
1.419 piece ·
3 - 5 working days
Article no.: T1540001
0.66€
incl. tax plus shipping costs
Available immediately
55 piece
· 2 - 4 working days
Ersatzschwamm
für Lötstation und Lötkolbenständer
Article no.: 51074
1.76€
incl. tax plus shipping costs
Available immediately
48 piece
· 2 - 4 working days
Available from the manufacturer
1.220 piece ·
3 - 5 working days
Lötfett Dose, 50 g
Lötpaste zum Löten von Elektronikbauteilen
Article no.: 45238
1.97€
incl. tax plus shipping costs
Available immediately
43 piece
· 2 - 4 working days
Available from the manufacturer
2.223 piece ·
3 - 5 working days
Lötzinn bleifrei, ø 1,0 mm, 17 g
Zusammensetzung: 0,3 % Silber, 0,7 % Kupfer, 96,5 % Zinn, Flußmittelanteil: 2,5 %, Schmelzpunkt 217° C
Article no.: 40843
3.13€
incl. tax plus shipping costs
Available immediately
42 piece
· 2 - 4 working days
Available from the manufacturer
3.141 piece ·
3 - 5 working days
- 99,3% Zinn, 0,7% Kupfer
- bleifrei
- 0,5mm Durchmesser
- 100g auf Rolle
Article no.: T1540122
8.77€
incl. tax plus shipping costs
Available immediately
31 piece
· 2 - 4 working days
Available from the manufacturer
300 piece ·
3 - 5 working days
Entlötpumpe, Leichtmetallgehäuse mit Teflonspitze
Lötpumpe mit hoher Saugleistung zum Enfernen von Altlot
Article no.: 51200
2.32€
incl. tax plus shipping costs
Available immediately
27 piece
· 2 - 4 working days
Available from the manufacturer
4.299 piece ·
3 - 5 working days
Reinigungswolle
reinigt Lötspitzen ohne Wasser
Article no.: 72360
3.13€
incl. tax plus shipping costs
Available immediately
25 piece
· 2 - 4 working days
Available from the manufacturer
280 piece ·
3 - 5 working days
Die Entlötpumpe ZD-205K ist ein hochwertiges, zuverlässiges Werkzeug, das sich perfekt für jeden eignet, der gelötete Komponenten von Leiterplatten entfernen möchte. Diese Pumpe kann mit einer Hand bedient werden, wodurch die Handhabung sehr einfach ist, und verfügt über eine starke Absaugung, mit der selbst hartnäckiges Lot entfernt werden kann. Dank ihres kompakten Designs nimmt sie nur wenig Platz auf Ihrer Werkbank ein, und die langlebige Teflondüse sorgt für jahrelangen problemlosen Einsatz. Die Düse kann zum Reinigen oder Austauschen einfach abgeschraubt werden. Die Entlötpumpe ist ESD sicher.
Article no.: ZD-205K
3.53€
incl. tax plus shipping costs
Available immediately
24 piece
· 2 - 4 working days
Available from the manufacturer
175 piece ·
3 - 5 working days
Nie wieder anfeuchten und trotzdem effektiv reinigen. Während der Reinigung kühlt die Lötspitze nicht aus. Dazu ein passender Lötkolben-Ständer, so macht das Arbeiten Spaß!
Article no.: T1540110
5.75€
incl. tax plus shipping costs
Available immediately
24 piece
· 2 - 4 working days
Available from the manufacturer
195 piece ·
3 - 5 working days
Das Kolophonium-Flussmittel, in praktischer 20ml-Harzform, bietet durch seine Adipinsäure-Aktivierung verbesserte Lötzinn-Fließeigenschaften für präzise Lötarbeiten. Ideal für Elektronikfertigung und Reparaturen, sorgt es für saubere und zuverlässige Lötverbindungen und eignet sich hervorragend für kleinere Projekte und gelegentliche Reparaturen.
Article no.: AGT-033
2.00€
incl. tax plus shipping costs
Available immediately
23 piece
· 2 - 4 working days
Entlötpumpe HQ
Plastikgehäuse mit antistatischer Teflonspitze
Article no.: 51202
3.73€
incl. tax plus shipping costs
Available immediately
20 piece
· 2 - 4 working days
Available from the manufacturer
726 piece ·
3 - 5 working days
Für fast alle Lötprobleme!
Löthonig ist säurefrei, nicht ätzend und bildet neutrale Flussmittelrückstände. Besonders auch zur Verbindung schwer lötbarer Metalle geeignet. Lötet auch oxydierte Teile und vermeidet Korrosion im Messgerätebau.
Article no.: LOETHONIG
5.65€
incl. tax plus shipping costs
Available immediately
20 piece
· 2 - 4 working days
Lötkolbenständer
zur Ablage von Lötkolben
Article no.: 51207
3.33€
incl. tax plus shipping costs
Available immediately
20 piece
· 2 - 4 working days
Available from the manufacturer
630 piece ·
3 - 5 working days
Entlötpumpe Leichtmetallgehäuse mit Teflonspitze HQ
Lötpumpe mit hoher Saugleistung zum Enfernen von Altlot
Article no.: 51204
6.15€
incl. tax plus shipping costs
Available immediately
20 piece
· 2 - 4 working days
Available from the manufacturer
201 piece ·
3 - 5 working days
Lötzinn bleifrei, ø 0,56 mm, 100 g
Zusammensetzung: 0,3 % Silber, 0,7 % Kupfer, 96,5 % Zinn, Flußmittelanteil: 2,5 %, Schmelzpunkt 217° C
Article no.: 40850
15.73€
incl. tax plus shipping costs
Available immediately
19 piece
· 2 - 4 working days
Available from the manufacturer
1.076 piece ·
3 - 5 working days
Ersatzlötspitzenset für Lötstation EP 5 / EP 6, Lötkolben, verschiedene Ausführungen
Ersatzlötspitzen für Artikel 51098, 59865
Article no.: 51073
6.25€
incl. tax plus shipping costs
Available immediately
18 piece
· 2 - 4 working days
Available from the manufacturer
1.537 piece ·
3 - 5 working days
Entlötlitze 1 mm zur Entfernung von Lötzinn an Lötstellen 1,5 m
reiner Kupfer, gute Wärmeleitfähigkeit
Article no.: 45245
1.61€
incl. tax plus shipping costs
Available immediately
17 piece
· 2 - 4 working days
Available from the manufacturer
4.408 piece ·
3 - 5 working days
- potentialfrei
- Mikrolöttechnik
- federleicht: mit Anschlusskabel (1m, ohne Stecker) nur 20 g schwer
- ca. 25 Sek. Anheizzeit
- 12 V= / 8 Watt
- ca. 340 °C Löttemperatur
Article no.: T1540000
2.92€
incl. tax plus shipping costs
Available immediately
17 piece
· 2 - 4 working days
Available from the manufacturer
300 piece ·
3 - 5 working days
Ersatz Lötspitze für SMD Lötkolben T1540063

10mm, 1 Stück
Article no.: 79-8410
0.76€
incl. tax plus shipping costs
Available immediately
16 piece
· 2 - 4 working days
Available from the manufacturer
42 piece ·
3 - 5 working days
- passend für Art.-Nr. T1599604
- Lieferumfang: Ersatzspitze
Article no.: T1599605
0.50€
incl. tax plus shipping costs
Available immediately
15 piece
· 2 - 4 working days
Available from the manufacturer
202 piece ·
3 - 5 working days
Dritte Hand Löthilfe mit Lupe und Halter
die ideale Hilfe für alle filigranen Lötarbeiten
Article no.: 51226
12.00€
incl. tax plus shipping costs
Available immediately
15 piece
· 2 - 4 working days
Die supergünstige Lötstation für den Hobby-Bastler! Mit dem kompakten Gerät sind Sie für alle Löteinsätze bestens gewappnet. Hohe Lötqualität für Modellbauarbeiten, Schmuckreparaturen, zum Verbinden von Kabeln und vielen weiteren Anwendungen. Mit stabilem Lötkolbenständer. Der Drehregler ermöglicht zudem ein stufenloses Regulieren von 100 °C bis 450 °C.
Article no.: T1540109
16.94€
incl. tax plus shipping costs
Available immediately
15 piece
· 2 - 4 working days
Diese vielseitig einsetzbare Reparaturmatte eignet sich hervorragend zum Löten aber darüber hinaus auch für die perfekte Organisation von Bastelprojekten. Sei es der Aufbau einer Raspberry-Konfiguration oder das Reparieren des Smartphones oder anderer elektronischer oder technischer Bauteile, diese Silikonmatte bringt Ordnung in jedes Chaos. Einfach zu säubern, hitzefest bis 500°C und durch die magnetischen Felder sowie zahlreichen Sortierfächer bleibt alles dort wo es soll.
Article no.: SIL-MAT-3
9.98€
incl. tax plus shipping costs
Available immediately
14 piece
· 2 - 4 working days
Available from the manufacturer
500 piece ·
3 - 5 working days
Ersatz Entlötspitze ø1,3mm für Lötstation T1540120
Article no.: T1540128
2.12€
incl. tax plus shipping costs
Available immediately
14 piece
· 2 - 4 working days
Available from the manufacturer
25 piece ·
3 - 5 working days
• schwenkbar
• Aktivkohlefilter saugt Lötdämpfe ab
• Leistungsaufnahme 23W
• Luftdurchsatz ca. 60m³
Article no.: T1540107
35.80€
incl. tax plus shipping costs
Available immediately
14 piece
· 2 - 4 working days
Available from the manufacturer
13 piece ·
3 - 5 working days
Löthilfe mit 4 flexiblen Armen
helfende Hand für alle filigranen Löt- und Bastelarbeiten
Article no.: 61669
15.03€
incl. tax plus shipping costs
Available immediately
13 piece
· 2 - 4 working days
Gute und supergünstige Grundausstattung für Bastler, Heimwerker und Hobby-Elektroniker. Saubere Lötqualität für Modellbauarbeiten, Schmuckreparaturen, zum Verbinden von Kabeln und vielen weiteren Anwendungen.
Article no.: T1540010
12.30€
incl. tax plus shipping costs
Available immediately
13 piece
· 2 - 4 working days
- zum fixieren und lösen
- für Kleinteile wie ICs und SMD 40 g
- Aluminiumgriff
- Länge 125 mm
- incl. Saugdüse und 3 Saugnäpfen 7-10 mm
Article no.: T1540157
5.24€
incl. tax plus shipping costs
Available immediately
12 piece
· 2 - 4 working days
Available from the manufacturer
12 piece ·
3 - 5 working days
Article no.: E-LRB6
8.27€
incl. tax plus shipping costs
Available immediately
12 piece
· 2 - 4 working days
- 30 Watt Lötkolben
- Lötzinn im Spender (1,mm-Ø, 10g)
- Lötkolbenständer
- Lötspitze
- Lötfett
- Betrieb an 230V
Article no.: T1540147
10.59€
incl. tax plus shipping costs
Available immediately
11 piece
· 2 - 4 working days
Available from the manufacturer
46 piece ·
3 - 5 working days
1 2 3

Brazing: Top products from pistons to tin

Soldering has proven to be a highly effective technique when it comes to joining workpieces with a material bond. The joining material is usually the eponymous solder, an easily melted metal alloy. The thermal process is very often used in industrial operations. But the technique also benefits all those who tinker with electrical engineering projects in their own homes. At Berrybase, you can get all the tools you need for the process - of course, as usual, in the highest quality. What is the difference between soft soldering, brazing and welding? Perhaps you have already come across these terms in technical books. All three processes are used to create joints. However, the differences are great, both in the applications and the tools. You practice soft soldering whenever you hold a soldering iron in your hand. Since it usually involves electrical components, the heating here may only take place selectively. Soft soldering is used, for example, in electrical engineering to attach components to a circuit board. Soft soldering offers the advantage that the working temperature is somewhere between 200 - 250 °C degrees. The components to be soldered are therefore not subjected to excessive thermal stress. The solder joints are usually small, but provide sufficient support for the lightweight components. The material is only heated for a very short time and also cools down again quickly due to the small volume. Apart from a solder fume extraction system, you do not need to take any special safety precautions. Brazing is something for the rough and tumble when it comes to joining different metal profiles together. Typically, plumbers use this technique to stably connect pipes or gutters, for example. In brazing, the heating must take place over a large area. A soldering iron has far too little power here, which is why gas torches are usually used to heat the entire workpiece. In brazing, the temperatures are above 450 °C. When brazing a bicycle frame, for example, brazing temperatures of around 700 °C are used with propane or butane as the fuel gas. As you can see, brazing is much more time-consuming and also requires appropriate protective clothing. Welding is only mentioned here for the sake of completeness. As a pure maker, you will probably not come into contact with it, but at the latest when you need, for example, a suitable metal frame, welding will also become interesting for you. Welding involves working at temperatures far in excess of 1000 °C, and special acetylene-oxygen mixtures are used here. The workpieces are molten together with the welding wire along the weld seam and then fused together. Welded joints are much more stable than brazed joints. However, welding involves much more effort and extensive protective equipment is required. Also, not all materials are suitable for the high temperatures of the welding process

High-quality solder - completely without lead

Obligatory in soldering is, of course, the solder. When choosing the right solder, its diameter is of great importance. This should depend on the purpose for which you are using the soldering process. At Berrybase you can find different types of high quality solder. The available diameters range from 0.35 mm to 1.5 mm, which allows you to use them in a wide variety of applications. Another pleasant feature: all products are free of lead.

The right soldering iron makes the difference

Berrybase offers you a wide range of products so that you can find the right soldering iron for your individual project. You will find soldering irons with different advantages, such as soldering irons with integrated desoldering pump, USB connection or gas drive. Especially the latter feature can be advantageous if you want to solder independently of a power source, for example. However, all our soldering irons have in common that they are ideally suited for professional soldering work and promise excellent results. Your project requires you to solder on SMD assembled circuits? Then our SMD (surface-mounted device) soldering irons, which have been specially designed for this purpose, are the most suitable. The special pistons solder the sensitive components particularly gently and grip them simultaneously from both parts. A gentle soldering process is of great importance here, as SMD components do not have any wire connections, but are instead fixed to a circuit board with the aid of solderable connection surfaces.

High-quality products in a practical set: The benefits of a soldering station

If you want to be fully equipped for your next electrical engineering project or any repair work, a soldering station is recommended. Included in these sets are soldering irons with various attachments, a desoldering pump and a practical soldering iron stand. The soldering irons in these packages usually have a power of 30 watts. However, there are also soldering stations with hot air soldering guns that have a power of 300 watts. Depending on your needs, you can also use an SMD station here. If you value exact temperature control of the soldering iron, you will be very pleased with our digital soldering stations with target and actual temperature display.

Viewed

Switch to the appropriate shop now

We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.