Voltage Testers

Phase tester, shaft length 60mm

€0.95

Sofort verfügbar · 11 Stück · 1-3 days

Digital voltage tester Ergo-250, 12-250V, LC display

€1.50

Ab Hersteller · 100+ Stück · 3-5 Tage

Digital voltage tester Ergo-250, 12-250V, LC display

- AC/DC voltage display: 12, 36, 55, 110 to 250V- Polarity display: visual (±)- Without batteries- LC display- Frequency range: 50 Hz - 500 Hz- Input current: Is <0.25mA at 250V- Scope of delivery: voltage tester, instructions

T1649046

€1.50

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

PCWork, PCW06A, voltage tester in pen format

€7.90

Ab Hersteller · 100+ Stück · 3-5 Tage

PCWork, PCW06A, voltage tester in pen format

The PCW06A enables simple voltage testing. With its practical retaining clip (like a biro) and bright LED torch, the PCW06A voltage tester is a practical tool for both professionals and hobbyists. Features CAT III 1000V, CAT IV 600V NCV test (non-contact voltage detection) Dual measurement mode: 12-1000V (sensitive mode) or 48-1000V (standard mode) Double insulation Buzzer and LED light indicate phase or neutral LCD display with two-colour backlight (red and green) and bar graph (indicates voltage level) Bright LED torch Practical retaining clip (like a pen) Low battery indicator and automatic switch-off function Powered by 2x 1.5V AAA batteries (included)

PCW06A

€7.90

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

JIMIHOME JM-G2704, Voltage Tester 12-1000V

€11.90

Sofort verfügbar · 5 Stück · 1-3 days

JIMIHOME JM-G2704, Voltage Tester 12-1000V

The JM-G2704 electronic voltage tester from JIMI Home is used for electrical work at home or at work, for example. It allows you to measure voltage safely and accurately. It allows you to check interruption points and recognises active and inactive cables. It has a sound and light alarm and also informs you of low battery voltage. It is also equipped with a torch and switches off automatically after 5 minutes of non-use. Accurate measurements With the JIMI Home JM-G2704 you can measure the voltage without contact and set the sensitivity in the range of 12~1000V or 48~1000V. You can also use it to detect active and inactive cables, as indicated by the colour display. You can also use it to check interruption points - you will be notified by a sound and light signal. The alarm also informs you of high/medium/low voltage. Sophisticated design The product is made from a comfortable material and the practical clip allows you to attach the tester to your trouser or shirt pocket. It also has a torch, which makes it easier for you to work in poorly lit rooms. If the battery voltage falls below 2.5 V, the tester signals this with a light signal. On the other hand, the device switches off automatically when the voltage reaches less than 2.4 V. Specification: Manufacturer: JIMI JIMI Home Model JM-G2704 Colour Black colour Voltage detection range 12/48~ 1000 V Operating frequency 50/60 Hz Type of alarm Sound and light Non-contact phase detection Yes Illumination Red and green Cable activity test Yes Torch Yes, LED Automatic switch-off Yes, after 5 minutes of inactivity Low battery indicator Yes NCV sensitivity High/low, manually adjustable Power supply 2 x 1.5V AAA batteries Security level CAT. III 1000V/CAT. IV 600V Weight 55 g Dimensions 160 x 23 mm

JMH-G2704

€11.90

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, green

€1.20

Sofort verfügbar · 100+ Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, green

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 2 connection cables, it can be connected directly to the voltage source. The display has an integrated microcontroller that reads the voltage, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range of 3.2 - 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright green LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: blue Power supply: 3.2 - 30V Measuring range: 3.2 - 30V Precision: ±0.1V Current consumption: approx. 3-4 mA Display dimensions: approx. 23 x 14 mm PCB dimensions: approx. 33 x 15 mm Combined height: 10 mm Cable length: approx. 9 cm Pin assignment: Red=supply voltage module and measurement input Black=Ground, Ground/GND

SVM330-G

€1.20

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, blue

€1.20

Sofort verfügbar · 29 Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, blue

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 2 connection cables, it can be connected directly to the voltage source. The display has an integrated microcontroller that reads the voltage, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range of 3.2 - 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright blue LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical dataLED colour: bluePower supply: 3.2 - 30VMeasuring range: 3.2 - 30VPrecision: ±0.1VCurrent consumption: approx. 3-4 mADisplay dimensions: approx. 23 x 14 mmPCB dimensions: approx. 33 x 15 mmCombined height: 10 mmCable length: approx. 9 cmPin assignment: Red=supply voltage module and measurement inputBlack=Ground, Ground/GND

SVM330-B

€1.20

Sofort verfügbar · 29 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, yellow

€1.20

Sofort verfügbar · 37 Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, yellow

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 2 connection cables, it can be connected directly to the voltage source. The display has an integrated microcontroller that reads the voltage, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range of 3.2 - 30 V and only requires around 3-4 mA current to supply the microcontroller and the display. The bright yellow LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: blue Power supply: 3.2 - 30V Measuring range: 3.2 - 30V Precision: ±0.1V Current consumption: approx. 3-4 mA Display dimensions: approx. 23 x 14 mm PCB dimensions: approx. 33 x 15 mm Combined height: 10 mm Cable length: approx. 9 cm Pin assignment: Red=supply voltage module and measurement input Black=Ground, Ground/GND

SVM330-Y

€1.20

Sofort verfügbar · 37 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, red

€1.20

Sofort verfügbar · 37 Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 3.2-30V, 2-wire, red

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 2 connection cables, it can be connected directly to the voltage source. The display has an integrated microcontroller that reads the voltage, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range of 3.2 - 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright red LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: blue Power supply: 3.2 - 30V Measuring range: 3.2 - 30V Precision: ±0.1V Current consumption: approx. 3-4 mA Display dimensions: approx. 23 x 14 mm PCB dimensions: approx. 33 x 15 mm Combined height: 10 mm Cable length: approx. 9 cm Pin assignment: Red=supply voltage module and measurement input Black=Ground, Ground/GND

SVM330-R

€1.20

Sofort verfügbar · 37 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Phase tester set of 2, shaft length 60mm & 100mm

€1.90

Sofort verfügbar · 2 Stück · 1-3 days

Phase tester set of 2, shaft length 60mm & 100mm

Fixpoint voltage tester set 140 mm and 190 mmSuitable for voltages between 200 V and 250 VSimple and proven testing aid for reliable and fast testing of electrical connections.2x single-phase current testers with insulated shaft for alternating current, voltages from 200 V to 250 VVoltage tester 1 dimensions: 3.0 mm x 60 mm, with pocket clipVoltage tester II dimensions: 3.5 mm x 100 mmScrewdrivers are suitable for slotted screwsPerfect for use on the construction site thanks to their robust and handy design.

77011

€1.90

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, green

€1.30

Artikel aktuell nicht lieferbar

Details

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, green

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 3 connection cables, it can be connected directly to the voltage source, with one serving as a measurement input. The display has an integrated microcontroller that reads the voltage in the range from 0 to 99 V, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range from 3.2 to 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright green LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: greenPower supply: 4.5 - 28VMeasuring range: 0 - 99VPrecision: ±0.1VCurrent consumption: approx. 3-4 mADisplay dimensions: approx. 23 x 14 mmPCB dimensions: approx. 33 x 15 mmCombined height: 11 mmCable length: approx. 9 cmPin assignment:Red=Supply voltage module White=Measurement inputBlack=Ground, Ground/GND

SVM099-G

€1.30

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, blue

€1.30

Artikel aktuell nicht lieferbar

Details

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, blue

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 3 connection cables, it can be connected directly to the voltage source, with one serving as a measurement input. The display has an integrated microcontroller that reads the voltage in the range from 0 to 99 V, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range from 3.2 to 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright blue LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: bluePower supply: 4.5 - 28VMeasuring range: 0 - 99VPrecision: ±0.1VCurrent consumption: approx. 3-4 mADisplay dimensions: approx. 23 x 14 mmPCB dimensions: approx. 33 x 15 mmCombined height: 11 mmCable length: approx. 9 cmPin assignment:Red=Supply voltage module White=Measurement inputBlack=Ground, Ground/GND

SVM099-B

€1.30

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, red

€1.30

Sofort verfügbar · 48 Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, red

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 3 connection cables, it can be connected directly to the voltage source, with one serving as a measurement input. The display has an integrated microcontroller that reads the voltage in the range from 0 to 99 V, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range from 3.2 to 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright red LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: redPower supply: 4.5 - 28VMeasuring range: 0 - 99VPrecision: ±0.1VCurrent consumption: approx. 3-4 mADisplay dimensions: approx. 23 x 14 mmPCB dimensions: approx. 33 x 15 mmCombined height: 11 mmCable length: approx. 9 cmPin assignment:Red=Supply voltage module White=Measurement inputBlack=Ground, Ground/GND

SVM099-R

€1.30

Sofort verfügbar · 48 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, yellow

€1.30

Sofort verfügbar · 44 Stück · 1-3 days

0.28" mini digital voltmeter with LED display, 0-99V, 3-wire, yellow

This mini digital voltmeter enables the monitoring of voltages and batteries. With its 3 connection cables, it can be connected directly to the voltage source, with one serving as a measurement input. The display has an integrated microcontroller that reads the voltage in the range from 0 to 99 V, compares it with a stable reference value and displays the voltage with a precision of 0.1 V on a 3-digit 7-segment display. It works in the voltage range from 3.2 to 30 V and requires only about 3-4 mA current to supply the microcontroller and the display. The bright yellow LED display is particularly easy to read. Mounting brackets facilitate attachment to various housings or panels. This voltmeter is not only popular with RC enthusiasts for monitoring batteries, but is also ideal for use on breadboards or in housings. Technical data LED colour: yellowPower supply: 4.5 - 28VMeasuring range: 0 - 99VPrecision: ±0.1VCurrent consumption: approx. 3-4 mADisplay dimensions: approx. 23 x 14 mmPCB dimensions: approx. 33 x 15 mmCombined height: 11 mmCable length: approx. 9 cmPin assignment:Red=Supply voltage module White=Measurement inputBlack=Ground, Ground/GND

SVM099-Y

€1.30

Sofort verfügbar · 44 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten