Waveshare ESP32-C6-Mini, 32-Bit RISC-V Dual-Core 160MHz, WiFi 6, BT5, 4MB Flash, without header
Product number: WS-27035
€7.90
Available · 100+ piece · 1-3 days
€7.90
Customers also bought
Available · 89 piece · 1-3 days
Available · 88 piece · 1-3 days
Available · 6 piece · 1-3 days
Available · 30 piece · 1-3 days
Available · 26 piece · 1-3 days
Available · 78 piece · 1-3 days
Content: 10 Meter (€0.12 / 1 Meter)
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 28 piece · 1-3 days
Available · 66 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Content: 10 Meter (€0.12 / 1 Meter)
Available · 100+ piece · 1-3 days
Available · 11 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 93 piece · 1-3 days
Description
Product information "Waveshare ESP32-C6-Mini, 32-Bit RISC-V Dual-Core 160MHz, WiFi 6, BT5, 4MB Flash, without header"
This state-of-the-art development board is based on the ESP32-C6FH4 and is equipped with dual processors that achieve a running speed of up to 160MHz. It offers integrated 2.4 GHz WiFi 6 and Bluetooth 5, supported by powerful wireless communication for demanding applications in the AIoT and smart devices sectors. The castellated module structure facilitates integration into SMD applications and supports developers in the realisation of complex projects.
Features at a glance
- High-performance dual-processor system consisting of a 160MHz and a 20MHz RISC-V processor.
- Supports a variety of development platforms including ESP-IDF and Arduino, allowing for extensive customisation and expansion.
- Module with solder pads for direct soldering on carrier boards, optimised for SMD applications.
- 32-bit RISC-V processor with a clock frequency of up to 160 MHz and a further low-energy 32-bit RISC-V processor with up to 20 MHz.
- 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4MB Flash memory.
- Integrated 2.4 GHz Wi-Fi and Bluetooth LE dual-mode wireless communication.
- 22 × GPIO pins and onboard USB Type-C port allow flexible configuration of pin functions.
Other data
- Supports flexible clocking and independent module settings for power supply to realise low power consumption in various scenarios.
- Function diagram:
Scope of delivery
- 1x ESP32-C6-Mini development board without pin header
What is RISC-V and what are its advantages compared to the classic ESP32?
RISC-V is an open, standardised instruction set architecture (ISA) that is characterised by its flexibility and scalability. Compared to the classic ESP32, which is based on a proprietary architecture, RISC-V offers developers more freedom when adapting and optimising systems. The open nature of RISC-V makes it possible to tailor hardware and software solutions to the specific requirements of a project, which is particularly beneficial for advanced applications.
What is AIoT?
AIoT stands for Artificial Intelligence of Things and describes the integration of artificial intelligence (AI) into the Internet of Things (IoT). While IoT ensures the networking and communication of devices via the internet, AIoT extends these capabilities to include intelligent decision-making and automation. By combining AI and IoT, devices can not only collect and exchange data, but also analyse it in order to take independent action or make recommendations. AIoT is used in various areas such as smart homes, Industry 4.0 and healthcare, where it makes processes more efficient and enables personalised experiences.
Properties
| Zolltarifnummer: | 85269200 |
|---|---|
| Brand: | Waveshare |
| Country of Origin: | China |
| Gross Weight (kg): | 0.003 |
| Manufacturer ID: | ESP32-C6-Zero |
| Product ID: | WS-27035 |
Manufacturer
Waveshare
Waveshare: High quality modules for your Raspberry Pi
Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.
Waveshare provides an optimal view
You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.
For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.
If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.
Compact and of brilliant quality: The Waveshare 7 inch Display
The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.
At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.
Waveshare Game HAT: Turning your Raspberry Pi into a game console
One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.
If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.
Practical accessories for every purpose
By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.
Manufacturer and safety information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com
WEEE number: 72769965
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Keep the product out of the reach of children.
- Do not use in damp or wet environments to avoid short circuits.
- Protect from overheating and direct sunlight.
- Do not supply inputs and outputs with the wrong voltage. Observe the operating voltage (typically 3.3 V).
- Do not touch with bare hands or conductive materials when the board is in operation.
- Improper handling can damage components or cause a fire hazard.
- Only use with approved power supply units and accessories.
- When soldering or modifying the product, secure it properly and observe earthing.
- Dispose of in accordance with local regulations for electronic waste.
- Do not dispose of with household waste, but take to an electronics recycling centre.
- Dispose of batteries/power supply units separately and in accordance with their specific regulations.
Reviews 1
Login
1 review
8 November 2025 12:42
Funktioniert wie erwartet, gute Qualität
Funktioniert wie erwartet, gute Qualität
Customers also viewed
Available · 30 piece · 1-3 days
Available · 16 piece · 1-3 days
Available · 66 piece · 1-3 days
Available · 6 piece · 1-3 days
Available · 38 piece · 1-3 days
Available · 7 piece · 1-3 days
Available · 5 piece · 1-3 days
Available · 88 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 29 piece · 1-3 days