Waveshare 2.13" e-paper display for Raspberry Pi Zero: 5-point touch, 250×122 pixels, ABS housing

Now you can record even more fast action videos in Full HD or 4K Ultra HD with your Android smartphone, system camera, drone or GoPro action cam. The SanDisk Extreme microSDHC and microSDXC UHS-I memory cards are designed for extreme durability in even the harshest environments. With extreme speeds, you can capture detailed footage of your adventures and reduce latency when transferring video. All SanDisk products meet the highest possible standards and undergo rigorous testing. That's why you can always rely on the outstanding quality, performance and reliability of SanDisk products.Technical specifications:General specificationsProduct typeFlash memory cardStorage capacity32 GBCompatibilityNot specificMemorySD Speed ClassA1 / Video Class V30 / UHS-I U3Form factormicroSDHC UHS-I memory cardIncluded memory adaptermicroSDHC/SD adapterDimensions and weightWidth10.92 mmDepth14.99 mmThickness1.02 mmWeight4.54 g

The Raspberry Pi Zero WH is an alternative version of the Raspberry Pi Zero W and also comes with an assembled GPIO pin header. This eliminates the need for soldering. Technical data BCM 2835 SOC @ 1GHz 512MB RAM On-board Wireless LAN - 2.4 GHz 802.11 b/g/n (BCM43438) On-board Bluetooth 4.1 + HS Low-energy (BLE) (BCM43438) micro-SD slot mini-HDMI type C connection 1x micro-B USB for data 1x micro-B USB for power supply CSI Camera Connector (requires a separately available adapter cable) Equipped 40-pin GPIO connector Compatible with existing pHAT/HAT add-on boards Dimensions: 65 x 30 x 5mm Note Please note that the Raspberry Pi Zero will not function without a loaded SD card! Images running in the Raspberry Pi 2/3 or Zero (without W) may not be compatible with the Pi Zero. At least NOOBS version 2.2.0 (from 27 February 2017) or Raspbian 2017-02-27 or newer is required.

The official Raspberry Pi Micro USB power supply is compatible with any Raspberry Pi that is powered via a micro USB connection and reliably supplies it with power. Output Output voltage: +5.1V DC Minimum load current: 0.0A Rated load current:2.5A Maximum power:12.5W Load regulation:±5% Line regulation:±2% Ripple and noise:120mVp-p Rise time: maximum 100ms up to the control limits for DC outputs Switch-on delay:3000ms maximum at nominal input AC voltage and full load Protection Short circuit protection Overcurrent protection Efficiency: minimum 80.73% (output current of 100%, 75%, 50%, 25%) Output cable: 1.5m 18AWG Output connector: micro USB Input: Voltage range: 100-240Vac (nominal) 96-264Vac (operation) Frequency: 50/60Hz ±3Hz Current: 0.5A maximum Power consumption (without load): 0.075W maximum

The Raspberry Pi Zero 2 W is the long-awaited successor to the popular Raspberry Zero W - with many upgrades, but in the same form factor! It has a quad-core 64-bit Arm Cortex-A53 CPU clocked at 1GHz. At the heart of the board is a Raspberry Pi RP3A0 System-in-Package (SiP), which integrates a Broadcom BCM2710A1 chip with 512 MB LPDDR2 SDRAM. The updated processor provides the Pi with 40% more single-thread performance and five times more multi-thread performance than the original single-core Raspberry Pi Zero. The Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE) and modular compliance certification. The board has a microSD card slot, a CSI-2 camera port, a USB On-The-Go (OTG) port and a free area for a HAT-compatible 40-pin GPIO connector. Power is supplied via a micro USB socket. Video output is via a mini-HDMI connection. A composite video output can easily be made available via test points if required. As the Raspberry Pi Zero 2 W has the same size and connector positioning as previous Zero models, existing housings can still be used. Technical specifications BCM 2710A1 64-bit ARM Cortex-A53 Quad-Core CPU @ 1GHz 512MB RAM On-board Wireless LAN - 2.4 GHz 802.11 b/g/n On-board Bluetooth 4.2 / Bluetooth Low-energy (BLE) micro-SD slot mini-HDMI type C connection 1x micro-B USB for data 1x micro-B USB for power supply CSI Camera Connector (requires a separately available adapter cable) Composite video and reset pins via solder points Unpopulated 40-pin GPIO connector Compatible with existing pHAT/HAT add-on boards Dimensions: 65 x 30 x 5mm

SD-Kartenqualität ist ein entscheidender Faktor für das Nutzererlebnis eines Raspberry Pi-Computers. Die hochwertigen A2-microSD-Karten von Raspberry Pi unterstützen höhere Busgeschwindigkeiten und die Befehlwarteschlangen-Erweiterung, was eine gewisse Pipeline-Verarbeitung zufälliger Lesevorgänge ermöglicht. Diese Eigenschaften verringern den Leistungsunterschied zwischen SD-Karten und NVMe-SSD. Raspberry Pi SD-Karten wurden rigoros mit Raspberry Pi-Computern getestet, um optimale Leistung zu gewährleisten.  Technische Daten Geschwindigkeitsklasse: C10, U3, V30, A2 Zufällige 4KB Leseleistung: 3.200 IOPS (Raspberry Pi 4, DDR50) Zufällige 4KB Schreibleistung: 1.200 IOPS (Raspberry Pi 4, DDR50) Unterstützt DDR50 und SDR104 Busgeschwindigkeiten Kapazität: 32GB Formfaktor: microSDHC SD-Spezifikation: SD6.1 Betriebsspannung: 2.7 - 3.6V Betriebstemperatur: -25°C bis 85°C Lagertemperatur: -40°C bis 85°C Abmessungen: 15 × 11 × 1 mm Lieferumfang Raspberry Pi microSD-Karte 32GB Downloads Raspberry Pi SD Cards Product Brief

This adapter with Micro USB connection can be used on a Raspberry Pi Zero as well as on a smartphone / tablet with Micro USB connection (OTG functionality and OS support required). This adds a LAN RJ45 connection to the device. Technical data Connectors micro USB 2.0 type B plug RJ45 connection U/UTP Chipset USB/LAN converter: Realtek RTL8152B 10/100Mbit/s Cable length: approx. 10cm Colour: white

USB 2.0 Hi-Speed OTG adapter cable A socket > Micro B plug USB OTG (On The Go) compatible enables the connection of mass storage devices to OTG-compatible devices, e.g. smartphones and tablets Specification: USB 2.0 Configuration: A plug - Micro-B plug Colour: white

Nutzen Sie die extreme Geschwindigkeit für schnelle Übertragungen, hohe App-Leistung und Aufnahmen im 4K-UHD-Format. Diese leistungsstarke microSD-Speicherkarte unterstützt 4K-UHD-Videos, Full-HD-Videos und Fotos mit hoher Auflösung. Damit eignet sie sich hervorragend für Android-Smartphones, Actioncams und Drohnen.Technische DatenAllgemeinProdukttypFlash-SpeicherkarteSpeicherkapazität128 GBArbeitsspeicherGeschwindigkeitsklasseA2 / Video Class V30 / UHS-I U3 / Class10LesegeschwindigkeitBis zu 190 MB/sSchreibgeschwindigkeitBis zu 90 MB/sFormfaktormicroSDXC UHS-I SpeicherkarteBesonderheitenStoßfest, wasserfest, röntgenstrahlenbeständig, temperaturbeständigEnthaltener SpeicheradaptermicroSDXC-an-SD-AdapterSoftware / SystemanforderungenSoftware inbegriffenSanDisk RescuePRO Deluxe, SanDisk Memory ZoneAbmessungen und GewichtBreite14.99 mmHöhe10.92 mmDicke1.02 mmUmgebungsbedingungenMin Betriebstemperatur-25 °CMax. Betriebstemperatur85 °C

Waveshare UPS HAT C für Raspberry Pi Zero, I2C Batterieüberwachung, Li-po 1000mAh, Schutzschaltungen Das Waveshare UPS HAT (C) ist ein spezialisiertes Modul zur unterbrechungsfreien Stromversorgung für die Raspberry Pi Zero Serie. Es unterstützt das gleichzeitige Aufladen und die Stromversorgung mit regulierten 5V-Ausgängen. Die Batterieüberwachung erfolgt in Echtzeit über den I2C-Bus, wodurch Spannung, Strom, Leistung und Restkapazität der Batterie überwacht werden können. Die integrierten Schutzschaltungen bieten Sicherheit vor Überladung, Entladung, Kurzschluss und Überstrom. Diese HAT ist einfach zu installieren und bietet eine stabile Stromversorgung für Projekte mit Raspberry Pi Zero. Merkmale im Überblick Unterbrechungsfreie Stromversorgung für Raspberry Pi Zero, mit automatischer Umschaltung auf Batterie. Echtzeit-Überwachung der Batterie über I2C für Spannung, Strom, Leistung und Restkapazität. Li-po Batterie-Aufladechip mit dynamischem Pfadmanagement für eine stabile Stromversorgung. Schutzschaltungen gegen Überladung, Entladung, Kurzschluss und Überstrom. Kompatibilität Unterstützt Raspberry Pi Zero Serie (Pinheader muss verlötet werden). Unterstützt die Montage weiterer HATs durch Pogo-Pin-Anschlüsse. Technische Daten Ausgangsspannung: 5V Ladegerät: 5V Kontrollbus: I2C Batterie: 803040 Li-po Batterie, 1000mAh, 3.7V Größe der Befestigungslöcher: 3,0 mm Abmessungen: 65 × 30 mm Sonstige Daten Raspberry Pi Zero, Display-Modul und MicroSD-Karte sind nicht im Lieferumfang enthalten. Was ist an Bord: ETA6003: recharge manager TPS61088: voltage boost chip INA219: voltage/current monitor S8261: Li-po battery protection chip FS8205: Li-po battery protection MOS Pogo pins: for connecting with Raspberry Pi Zero USB recharge port: 5V charger input Battery header: for connecting 803040 Li-po battery Power indicator Recharging indicator Lieferumfang: 1x UPS HAT (C)  1x 1000mAh Li-po battery  1x Screws pack  WIKI: www.waveshare.com/wiki/UPS_HAT_(C)

Features: Official case for Raspberry Pi Zero 3 different covers: Cover 1 - completely closed Cover 2 - allows access to GPIO pin header Cover 3 - allows mounting of an official Raspberry Pi camera (standard or NoIR) inside the case, using the included cable GPIO port on the base accessible through cut-out on the underside Included rubber feet ensure a secure stand Scope of delivery: 1x base 3x different covers 1x short camera cable (length approx. 4cm) 4x rubber feet Suitable for: Raspberry Pi Zero v1.3 Raspberry Pi Zero W Raspberry Pi Zero WH - Only suitable with cover 2 Raspberry Pi Zero 2 W - Only suitable with cover 1 and 2 The boards shown are not included in the scope of delivery.

Mini HDMI adapter HDMI A socket > Mini HDMI C plug Gold contacts moulded high qualityColour: white

Raspberry Pi 5 with 8 GB RAM This advanced model impresses with two microHDMI ports that enable outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. The Raspberry Pi 5 is equipped with a modern USB-C port for the power supply. The dual-band WLAN, which supports both 2.4 GHz and 5 GHz, and Bluetooth 5/BLE ensure outstanding networking capabilities. The Ethernet connection enables rapid data transfers at speeds of up to 1000 Mb/s. The Pi 5 also offers the option of being supplied with power via PoE (Power over Ethernet). All other specifications and features are consistent with those of the Raspberry Pi 4, ensuring continuity and reliability in the Raspberry Pi range. Accessories for the Raspberry Pi 5 To utilise the full potential of your Raspberry Pi 5, we recommend the following accessories: A microSD card, ideally with an operating system already installed. A stable power supply via USB-C, preferably 5V / 5A DC or 27W. A monitor and a suitable HDMI cable. Of course, a keyboard and mouse for easy operation. Product features Raspberry Pi 5 2.4GHz Quad-Core 64-bit Arm Cortex-A76 CPU: The power that will amaze you. VideoCore VII GPU: Enjoy state-of-the-art graphics with support for OpenGL ES 3.1 and Vulkan 1.2. Dual 4Kp60 HDMI output: For razor-sharp displays with HDR support. Up to 8GB LPDDR4X-4267 SDRAM: So that you always have enough RAM available. Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE: For the best connections at all times. The Raspberry Pi 5 offers an impressive variety of connection options 2 × USB 3.0 and 2 × USB 2.0 ports: For all your peripheral devices Gigabit Ethernet: Fast and stable network connections, with up to 1000Mb/s Dual 4Kp60 HDMI: For simultaneous, brilliant screen output And many more, from microSD card slots to GPIO headers 2 × 4-lane MIPI camera / display port PCIe2.0 for future HATs 40 GPIO pin headers: to realise your projects Advantages of the Raspberry Pi 5 The Raspberry Pi 5 is not just another mini-computer. It represents the future: a powerhouse in a compact design that is ready for a wide range of applications - whether for creative projects at home or demanding industrial applications. Can you imagine an everyday life where you are not just a consumer, but also a creator? Where you design technology according to your wishes? The Raspberry Pi 5 takes you there! Advantages of the Raspberry Pi 5 compared to the Raspberry Pi 4 What Raspberry Pi 4 Mod B Raspberry Pi 5 Processor Quad-Core Cortex A72 Quad-Core Cortex-A76 Architecture ARM 64-bit ARM 64-bit Clock frequency 1.5 GHz 2.4 GHz RAM 1GB, 2GB, 4GB, 8GB LPDDR4 2GB, 4GB and 8GB LPDDR4X *) WiFi 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/a Dual-band 802.11ac Bluetooth 5.0, BLE 5.0, BLE USB 2 x USB2.0 2 x USB3.0 2 x USB2.0 2 x USB3.0 with 5Gbps each Decoder H.265 (4Kp60 decode) H.264 (1080p60 decode, 1080p30 encode) OpenGL ES, 3.0 graphics 4Kp60 HECV OpenGL ES 3.1, Vulkan 1.2 LAN Gigabit Gigabit with PoE+ support Input power 5V / 3A DC 5V / 5A DC GPIO 40-pin header 40-pin header New features - RealTimeClock PCIe 2.0 Integrated power button Fan connector Operating system for Raspberry Pi 5 With the Raspberry Pi 5 you have the choice: The official Raspberry Pi OS is available, but other Linux distributions and even Windows 10 ARM64 can also be brought to life on this machine Important notes for the Raspberry Pi 5 Your Raspberry Pi 5 is a powerhouse that should be treated with care. Keep it away from moisture and avoid extremely high or low temperatures. The future has only just begun. With the Raspberry Pi 5, you are perfectly equipped to be at the forefront. Experience the technology you've always wanted! FAQ What is the main difference between the Raspberry Pi 5 and the Raspberry Pi 4? The Raspberry Pi 5 offers improved CPU performance, enhanced graphics options, more RAM and a variety of improved connectivity options and long-awaited features such as RTC or PCIe 2.0, compared to the Raspberry Pi 4. Does the Raspberry Pi 5 support 4K resolution? Yes, the Raspberry Pi 5 supports dual 4K displays via its HDMI ports. What operating systems are compatible with the Raspberry Pi 5? The Raspberry Pi 5 supports a variety of operating systems, including various Linux distributions and Windows IoT Core How much RAM is available in the Raspberry Pi 5? Models with 2 GB, 4 GB and 8 GB RAM are currently available. Does the Raspberry Pi 5 offer support for PoE (Power over Ethernet)? Yes, with an additional PoE+ HAT, the Raspberry Pi 5 can be supplied with power via Ethernet. Separate hardware that supports this in your network is required. What connections does the Raspberry Pi 5 offer? The Raspberry Pi 5 has USB 3.0 and 2.0 ports, Gigabit Ethernet, dual 4K HDMI, microSD card slot, 2 MIPI camera / display ports, PCIe 2.0 and the familiar 40-pin GPIO header. What safety precautions should I take when using the Raspberry Pi 5? The Raspberry Pi 5 should be operated in a well-ventilated area and should not be placed near water sources. It should be firmly secured or placed on a stable, flat, non-conductive surface.

Features suitable acrylic case for Raspberry Pi Zero W / WH all connections are freely accessible Memory card can be changed while installedRecess above the processor allows the installation of a heat sink (not included) Simple assembly Suitable for Raspberry Pi Zero W Raspberry Pi Zero WH Please make sure to remove all protective films from the housing parts before mounting so that the housing shines in full splendour. Note: The Raspberry Pi is for presentation purposes only and is not included in the scope of delivery!