Jetzt Bestellen und 15 Berrys sichern
Beschreibung
Produktinformationen "SparkFun Qwiic - Spectral sensor breakout, AS7263 NIR"
The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterise how different materials absorb and reflect different wavelengths of light. The AS7263 Breakout is unique in its ability to communicate with AT commands via both an I2C interface and a serial interface. Connecting is very easy thanks to the Qwiic connectors on the board: simply plug one end of the Qwiic cable into the breakout and the other end into one of the Qwiic shiels and plug the board into a development board. In no time at all, you can upload a sketch and start making spectroscopy measurements.
The AS7263 spectrometer detects wavelengths in the visible range at 610, 680, 730, 760, 810 and 860nm, each with 20nm full-width half-max detection. The board also has several options to illuminate objects you are trying to measure for a more accurate spectroscopy measurement. There is an onboard LED specifically selected for this task, as well as two pins to solder in your own LED.
NOTE: The I2C address of the AS7263 is 0x49 and is hardware defined. A multiplexer/mux is required to communicate with multiple AS7263 sensors on one bus. If you want to use more than one AS7263 sensor, you should use the Qwiic Mux Breakout.
Features:
The AS7263 spectrometer detects wavelengths in the visible range at 610, 680, 730, 760, 810 and 860nm, each with 20nm full-width half-max detection. The board also has several options to illuminate objects you are trying to measure for a more accurate spectroscopy measurement. There is an onboard LED specifically selected for this task, as well as two pins to solder in your own LED.
NOTE: The I2C address of the AS7263 is 0x49 and is hardware defined. A multiplexer/mux is required to communicate with multiple AS7263 sensors on one bus. If you want to use more than one AS7263 sensor, you should use the Qwiic Mux Breakout.
Features:
- 6 near-IR channels: 610nm, 680nm, 730nm, 760nm, 810nm and 860nm, each with 20nm FWHM
- NIR filter set realised by silicon interference filter
- 16-bit ADC with digital access
- Programmable LED driver
- 2.7V to 3.6V with I2Cinterface
- 2x Qwiic connections
Eigenschaften
| Zolltarifnummer: | 84733020 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 5904422376437 |
| Gross Weight (kg): | 0.003 |
| Manufacturer ID: | SEN-14351 |
| Product ID: | SEN-14351 |
Video
Manufacturer and safety information
Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Ensure that the product is properly installed and protected against moisture and dust.
- Ensure correct polarity and voltage during installation to prevent damage.
- Do not use in potentially explosive atmospheres or in direct contact with water.
- Replace damaged cables and connections immediately to avoid short circuits or safety risks.
- Keep away from children and unauthorised persons.
- Disconnect the appliance from the power supply for maintenance or repair.
- At the end of its service life, dispose of it in an environmentally friendly manner in accordance with local disposal regulations.
- Do not dispose of electronic waste with household waste, but take it to an appropriate collection point.
- Do not open the device by force to avoid injury and damage.
Bewertungen
0
Anmelden
