Description
Product information "SparkFun Qwiic - GPS Breakout, NEO-M9N, Chip Antenna"
The SparkFun NEO-M9N GPS Breakout with integrated chip antenna is a high-quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel GNSS receiver powered by the u-blox M9 engine, meaning it can receive signals from the GPS, GLONASS, Galileo and BeiDou constellations with an accuracy of ~1.5 metres. This breakout supports simultaneous reception of four GNSS, maximising positioning accuracy in challenging conditions, increasing precision and reducing lock time. Thanks to the integrated rechargeable battery, you have a backup power supply that allows the GPS to achieve a hot lock within seconds! Also, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which makes it perfect for Qwiic compatibility so we don't have to use up our precious UART ports. Since we are using our handy Qwiic system, no soldering is required to connect it to the rest of the system. Nevertheless, we have broken out the pins at 0.1" spacing in case you prefer to use a breadboard.
The NEO-M9N module detects jamming and spoofing events and can report them to the host so that the system can react to such events. The NEO-M9N module integrates a SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path, which allows normal operation even in the presence of strong RF interference.
U-blox-based GPS products are configurable with the popular but dense Windows programme called u-center. Many different functions can be configured on the NEO-M9N: Baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All this can be done within the SparkFun Arduino Library!
The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board battery that powers the RTC of the NEO-M9N. This reduces the time to first fix from a cold start (~24s) to a hot start (~2s). The battery maintains the RTC and the GNSS orbit data over a long period of time even without a power supply.
Features:
The NEO-M9N module detects jamming and spoofing events and can report them to the host so that the system can react to such events. The NEO-M9N module integrates a SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path, which allows normal operation even in the presence of strong RF interference.
U-blox-based GPS products are configurable with the popular but dense Windows programme called u-center. Many different functions can be configured on the NEO-M9N: Baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All this can be done within the SparkFun Arduino Library!
The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board battery that powers the RTC of the NEO-M9N. This reduces the time to first fix from a cold start (~24s) to a hot start (~2s). The battery maintains the RTC and the GNSS orbit data over a long period of time even without a power supply.
Features:
- Integrated chip antenna
- 92-channel GNSS receiver
- 1.5m horizontal accuracy
- 25Hz maximum update rate (4 simultaneous GNSS)
- Time-To-First-Fix
- Cold: 24s
- Hot: 2s
- Max. Altitude: 80.000m
- Max G: ?4
- Max speed: 500m/s
- Speed accuracy: 0.05m/s
- Heading accuracy: 0.3 degrees
- Time pulse accuracy: 30ns
- 3.3V VCC and I/O
- Power consumption: ~31mA Tracking GPS+GLONASS
- Software configurable
- Geofencing
- Odometer
- Spoofing detection
- External interrupt
- Pin control
- Low power mode
- Many others!
- Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces
- Get Started With the SparkFun NEO-M9N GPS Guide
- Wiring Diagram
- Eagle files
- Board dimensions
- Connection instructions
- Structure of a GPS system
- Data sheet (NEO-M9N)
- Product overview
- Integration manual
- Integration manual
- u-blox Protocol Specification
- NEO-M9M Documents & Resources
- u-center Software
- SparkFun u-blox GNSS Arduino Library
- GitHub Hardware Repo
Properties
| Zolltarifnummer: | 85299016 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 5904422369811 |
| Gross Weight (kg): | 0.006 |
| Manufacturer ID: | GPS-15733 |
| Product ID: | GPS-15733 |
Video
Manufacturer and safety information
Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before commissioning the GPS/GNSS module, check all connections carefully to avoid short circuits.
- Protect the device from moisture, extreme temperatures and other environmental influences.
- Only use with the specified operating voltage and the specified components.
- During installation, ensure that the antenna has a clear view of the sky to guarantee optimum signal quality.
- Handle components with care to avoid damage caused by electrostatic discharge (ESD).
- Do not use in the vicinity of strong magnetic or electromagnetic fields.
- At the end of its service life, dispose of it in an environmentally friendly manner and in accordance with local regulations.
- Do not dispose of electronic components with household waste, but take them to an appropriate collection point.
Reviews
0
Login