Description
Product information "SparkFun motor driver, dual TB6612FNG, with headers"
The TB6612FNG motor driver can control up to two DC motors with a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: clockwise rotation, anti-clockwise rotation, short-time braking and stop. The two motor outputs (A and B) can be controlled separately and the speed of each motor is controlled by a PWM input signal with a frequency of up to 100kHz. The STBY pin should be pulled high to bring the motor out of standby mode. Due to popular demand, this version of the SparkFun motor driver includes pre-soldered pin headers to make it easier to use. With the headers already soldered on, you can use this small board immediately without any assembly!
The logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is designed for up to 1.2A per channel (or up to 3.2A for a short single pulse).
The circuit board is supplied with all components as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are divided between two pin headers in a 0.1" grid; the pins are arranged so that the input pins are on one side and the output pins on the other.
Features:
The logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is designed for up to 1.2A per channel (or up to 3.2A for a short single pulse).
The circuit board is supplied with all components as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are divided between two pin headers in a 0.1" grid; the pins are arranged so that the input pins are on one side and the output pins on the other.
Features:
- Supply voltage: VM=15V max, VCC=2.7--5.5V
- Output current: Iout=1.2A (average) / 3.2A (peak)
- Standby control for power saving
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and undervoltage detection circuitry
- All TB6612FNG pins broken out to 0.1" spacing
- Filter capacitors on both supply lines
- Pre-soldered pin headers
- Get Started With the Motor Driver Hookup Guide
- Circuit diagram
- Eagle files
- Hookup Guide
- Datasheet (TB6612FNG)
- GitHub (v1.1c)
Properties
| Zolltarifnummer: | 84733020 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 5904422316532 |
| Gross Weight (kg): | 0.030 |
| Manufacturer ID: | ROB-14450 |
| Product ID: | ROB-14450 |
Manufacturer and safety information
Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Only use in dry indoor areas to avoid damage caused by moisture.
- Keep away from direct sunlight or extreme temperatures.
- Ensure that the operating voltage corresponds to the technical specifications.
- Only connect using a suitable cable and plug.
- Protect the product from mechanical damage, vibrations and shocks.
- Always switch off the power supply during installation and maintenance.
- Protect electronic components from electrostatic discharge (ESD).
- Use only by trained personnel.
- Do not repair defective products without authorisation, but dispose of them properly.
- Dispose of batteries or rechargeable batteries in accordance with local regulations.
- Do not dispose of with household waste, but pass it on to certified collection centres.
Reviews
1
Login
1 review
12 January 2022 00:00
-
-