Zur Startseite gehen
€0.00
Menü
Zeige alle Kategorien Expansion Boards
Zurück Expansion Boards anzeigen
Bildergalerie überspringen
seeed Grove Starter Kit for Raspberry Pi Pico
seeed Grove Starter Kit for Raspberry Pi Pico
seeed Grove Starter Kit for Raspberry Pi Pico
seeed Grove Starter Kit for Raspberry Pi Pico
1 Bewertung

seeed Grove Starter Kit for Raspberry Pi Pico

Produktnummer: SE-110061283

€44.90

Jetzt Bestellen und
23 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

1 Bewertung
product-image
Produkt-Zubehör direkt mitbestellen
€3.39*
€0.50*

Sofort verfügbar · 4 Stück · 1-3 days

Menge prüfen

  • Sofort verfügbar

    4 Stück : 1-3 days

99% positive Bewertung
Kostenloser Versand ab 79€*
Support
Wird oft zusammengekauft
seeed Grove Starter Kit for Raspberry Pi Pico
+
Breadboard with 400 contacts
+
Pin header set for Raspberry Pi Pico
+
official Raspberry Pi Micro USB cable, red, 1.0m
+
Acrylic housing for Raspberry Pi Pico
=
Gesamtpreis: €50.20*
Beschreibung

Produktinformationen "seeed Grove Starter Kit for Raspberry Pi Pico"

The Raspberry Pi Pico has swept the MCU world like a giant wave. Pico was born with strong performance, favourable price and comprehensive resources, and will definitely become a great platform for learning and mastering electronic knowledge.

To help you ride this wave, we have launched the Grove Starter Kit for Raspberry Pi Pico as soon as possible. We have selected the most common sensors, actuators and displays in this kit. With the help of the Grove Pico Shield, you can connect all these modules to the Pico by simply plugging and unplugging them. This will greatly reduce the difficulty of using the Raspberry Pi Pico for learning and project prototyping and help you get started with Micropython quickly.

In the meantime, we provide detailed tutorials for each module. Micropython is currently supported, and Arduino is expected to be supported soon. This means that with this kit you can choose a programming language that suits you to quickly switch on an LED light, control a motor or servo, read out the values of various sensors and display them on the LCD screen. Play your new Pico now with the Grove starter kit!

Further information as well as data sheets, instructions and downloads can be found at:
http://www.seeedstudio.com/Grove-Starter-Kit-for-Raspberry-Pi-Pico-p-4851.html

Lieferumfang:
- 1 x Grove - LED-Pack
- 1x Grove - RGB-LED (WS2813 Mini)
- 1x Grove - Lichtsensor
- 1x Grove - Tonsensor
- 1x Grove - Drehwinkelsensor
- 1x Grove - Temperatur- und Luftfeuchtigkeitssensor
- 1x Grove - Mini PIR motion sensor
- 1x Grove - Passive buzzer
- 1x Grove - Button
- 1x Grove - Servo
- 1x Grove - Mini fan
- 1x Grove - Relay
- 1x Grove - 16x2 LCD
- 1x Grove Shield for Pi Pico
- 8x Grove cable
Eigenschaften
Zolltarifnummer: 84714900
Brand: seeed
Compatibility: Raspberry Pi Pico
Country of Origin: China
Gross Weight (kg): 0.290
Manufacturer ID: 110061283
Product ID: SE-110061283
Manufacturer and safety information
Manufacturer information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
seeed_emea@seeed.cc

WEEE number: 20453810

Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de

Safety instructions
  • Keep the product away from liquids, moisture and extreme heat.
  • Only use the product in well-ventilated areas to avoid overheating.
  • Ensure that no short circuits occur due to contact with conductive objects.
  • Take care with the power supply; only use compatible power supply units.
  • Be careful when handling sensitive contacts and components to avoid damage caused by electrostatic discharge (ESD).
  • Only use the expansion board with suitable, compatible devices.
  • Avoid modification or disassembly, as this may invalidate the warranty.
  • Keep the product away from children, as small parts can be swallowed.
  • Dispose of the device in an environmentally friendly manner and in accordance with local regulations for electronics.
  • Never dispose of electronic components with household waste; use appropriate collection points.
Bewertungen
1

1 von 1 Bewertungen

100%

0%

0%

0%

0%

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

1 Bewertung

27. September 2021 00:00

Einfach genial und für alle Ei...

Einfach genial und für alle Einsteiger in die Grove-Welt in Kombination mit Micropython ein Muss!!!

Produktgalerie überspringen

Zubehör

%
Raspberry Pi Pico, RP2040 microcontroller board
Raspberry Pi Pico, RP2040 microcontroller board
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support For more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.
€3.39 €4.10 (17.32% gespart)

Sofort verfügbar · 100+ Stück · 1-3 days

Pin header set for Raspberry Pi Pico
Pin header set for Raspberry Pi Pico
Set consisting of 2x 20 pin and 1x 3 pin pin header, suitable for Raspberry Pi Pico. Technical data: 1 pin row with 20 pins / 3 pins 2.54mm pin spacing (pitch) Pin height: 3 / 6 mm Total height: approx. 11 mm separable after each pin max. voltage load: 250V AC/DC max. current load: 3A AC/DC max. contact resistance: 20mΩ min. Insulation resistance: 1,000MΩ
€0.50

Sofort verfügbar · 100+ Stück · 1-3 days

Produktgalerie überspringen

Kunden kauften auch

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne. Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt.  RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren. Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen. Technische Daten Formfaktor: 21 mm × 51 mm CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins Peripherie: 2 × UART 2 × SPI-Controller 2 × I2C-Controller 24 × PWM-Kanäle 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung 12 × PIO-Zustandsmaschinen Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2 Eingangsspannung: 1,8–5,5V DC Betriebstemperatur: -20°C bis +85°C Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion Downloads Raspberry Pi Pico 2 Product Brief Raspberry Pi Pico 2 MicroPython SDK Raspberry Pi Pico 2 C/C++ SDK RP2350 Datenblatt
€7.50

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board, mit Headern
Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board, mit Headern
Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne. Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt.  RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren. Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen. Technische Daten Formfaktor: 21 mm × 51 mm CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins Peripherie: 2 × UART 2 × SPI-Controller 2 × I2C-Controller 24 × PWM-Kanäle 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung 12 × PIO-Zustandsmaschinen Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2 Eingangsspannung: 1,8–5,5V DC Betriebstemperatur: -20°C bis +85°C Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion Vorbestückter Header: 40-polige vorgelötete Stiftleiste Downloads Raspberry Pi Pico 2 Product Brief Raspberry Pi Pico 2 MicroPython SDK Raspberry Pi Pico 2 C/C++ SDK RP2350 Datenblatt
€8.50

Sofort verfügbar · 70 Stück · 1-3 days

official Raspberry Pi Micro USB cable, red, 1.0m
official Raspberry Pi Micro USB cable, red, 1.0m
This official Micro USB cable is designed for use with the Raspberry Pi Pico. It has been designed for optimum performance and functionality with the Raspberry Pi.Also suitable as a replacement for the official Raspberry Pi keyboard. Technical data Standard USB A 2.0 plug - micro USB 2.0 type B plug Nickel-plated contacts Cable length: 1m Colour: red
€1.80

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi Pico - Full Starter Kit
Raspberry Pi Pico - Full Starter Kit
Inhalt: Raspberry Pi Pico, RP2040 Mikrocontroller-Boardoffizielles Raspberry Pi Micro USB Kabel, rot, 1,0m2 x Stiftleiste, 1x 20-polig, RM 2,54, gerade40pin Jumper / Dupont Kabel Set, je 1x F-F / M-M / F-M, 10cmBreadboard mit 400 KontaktenStiftleiste, 1x 3-polig, RM 2,54, geradeProduktdetails:    1 x Raspberry Pi Pico, RP2040 Mikrocontroller-Board  Raspberry Pi Pico ist ein kostengünstiges, leistungsstarkes Mikrocontroller-Board mit flexiblen digitalen Schnittstellen. Die wichtigsten Merkmale sind: RP2040-Mikrocontroller-Chip, entwickelt von Raspberry Pi in Großbritannien Dual-Core ARM Cortex M0+ Prozessor, flexibler Takt bis zu 133 MHz 264KB SRAM und 2MB on-board Flash-Speicher Modul ermöglicht direktes Löten auf Trägerplatinen USB 1.1 Host- und Device-Unterstützung Stromsparender Sleep- und Dormant-Modus Drag & Drop-Programmierung mit Massenspeicher über USB 26x multifunktionale GPIO-Pins 2x SPI, 2x I2C, 2x UART, 3x 12-Bit-ADC, 16x steuerbare PWM-Kanäle Präzise Uhr und Timer on-chip Temperatursensor Beschleunigte Fließkomma-Bibliotheken auf dem Chip 8x programmierbare E/A-Zustandsautomaten (PIO) für kundenspezifische Peripherieunterstützung Weiter Informationen zum Raspberry Pi Pico und zum Start finden Sie unter https://www.raspberrypi.org/documentation/pico/getting-started/. ------------------1 x offizielles Raspberry Pi Micro USB Kabel, rot, 1,0m Dieses offizielle Micro USB-Kabel ist für den Einsatz mit dem Raspberry Pi Pico vorgesehen. Es wurde für optimale Leistung und Funktionalität mit dem Raspberry Pi entwickelt.Auch als Ersatz für die offizielle Raspberry Pi Tastatur geeignet. Technische Daten Standard USB A 2,0 Stecker - micro USB 2.0 Typ B Stecker Vernickelte Kontakte Kabellänge: 1m Farbe: rot ------------------2 x Stiftleiste, 1x 20-polig, RM 2,54, gerade  Technische Daten:1 Pin-Reihe mit 20 Pins2,54mm Pinabstand (Pitch)Pin Höhe: 3 / 6 mm Gesamt Höhe: ca. 11 mmtrennbar nach jedem Pinmax. Spannungsbelastung: 250V AC/DCmax. Strombelastung: 3A AC/DCmax. Kontaktwiderstand: 20mΩmin. Isolationswiderstand: 1.000MΩ------------------1 x 40pin Jumper / Dupont Kabel Set, je 1x F-F / M-M / F-M, 10cm Mit diesem Jumperkabel-Set kann ein Raspberry Pi, Arduino oder andere Geräte schnell und einfach mit einem Breadboard oder mit Modulen/Sensoren verbunden werden. Das Set enthält 3 verschiedene Kabel (Female-Female, Male-Male, Female-Male). Jedes Kabel besteht aus 40 Einzeladern, die auch getrennt werden können. Technische Daten: 3 Kabel im Lieferumfang enthalten:Female - Female (Buchsen - Buchsen)Male - Male (Stecker - Stecker)Female - Male (Buchsen - Stecker)Jedes Kabel besteht aus 40 Adern Adern können auch getrennt werden 2,54mm Pinabstand (Pitch)Innenleiter: AWG 28 KupferLänge: 10cm ------------------1 x Breadboard mit 400 Kontakten Dieses Breadboard erlaubt es schnell einfache fliegende Schaltungen aufzubauen. Es können auch mehrere Breadboards aneinandergereiht werden. Technische Daten- 400 Kontakte- Abmessungen: 83 x 55mm- 2,54mm Raster- aus hochwertigem ABS Kunststoff gefertigt- Doppelklebeband auf der Rückseite des Breadboards- Rastnasen an den Seiten, sodass mehrere Boards zusammengesteckt werden können
€14.35

Sofort verfügbar · 21 Stück · 1-3 days

Breadboard with 400 contacts
Breadboard with 400 contacts
Breadboard with 400 contacts This breadboard makes it possible to quickly build simple, on-the-fly circuits. It can be extended by stringing several units together. The use of ABS plastic and the latches on the sides allow flexible and stable assembly. Features at a glance Enables quick and easy assembly of flying circuits. Several boards can be connected using the latches on the sides. Technical data Contacts: 400 Dimensions: 83 x 55 mm Grid: 2.54 mm Material: ABS plastic Fastening: Double-sided adhesive tape on the back Scope of delivery 1x breadboard with 400 contacts
€1.50

Sofort verfügbar · 100+ Stück · 1-3 days

Project kit for Raspberry Pi Pico, components only
Project kit for Raspberry Pi Pico, components only
This kit contains all the components used in the book "Get Started with MicroPython on Raspberry Pi Pico" for the projects shown. All you need is a Raspberry Pi Pico and a micro USB cable. The set is therefore ideal for anyone who already has a Raspberry Pi Pico. The set is supplied in a practical plastic box.We also offer a complete set that includes the Raspberry Pi Pico, a USB cable and the book. Contents: 1x LCD1602 blue / white with I2C backpack1x HC-SR501 PIR infrared motion detector1x 40pin Jumper / Dupont cable, separable, 20cm, female - female1x 40pin Jumper / Dupont cable, separable, 20cm, Male - Male1x 40pin Jumper / Dupont cable, separable, 20cm, Female - Male1x breadboard with 830 contacts1x breadboard potentiometer, 10kΩ1x signal generator with integrated generator, 2kHz10x LED, 5mm, red10x LED, 5mm, green10x LED, 5mm, yellow30x resistor, 330Ω4x short-stroke pushbuttons1x push-button cap, green1x push-button cap, red1x push-button cap, yellow1x push-button cap, blue2x pin header for Raspberry Pi Pico, 20 pins1x pin header for Raspberry Pi Pico, 3 pins
€14.90

Sofort verfügbar · 44 Stück · 1-3 days

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Pico WH is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.The Raspberry Pi Pico W is designed as a low-cost yet flexible development platform for the RP2040 with a 2.4 GHz wireless interface and the following key features:RP2040 microcontroller with 2 MB flash memoryIntegrated 2.4 GHz single-band wireless interface (802.11n)Micro USB-B connector for power and data (and for reprogramming the flash)40-pin 21mmx51mm 'DIP' PCB, 1mm thick, with 0.1" through-holes, also with edge decorations26 multifunctional 3.3 V general purpose inputs and outputs (GPIO) 23 GPIOs are purely digital, three of which are also ADC-capable Can be surface-mounted as a module3-pin ARM Serial Wire Debug Port (SWD)Simple but highly flexible power supply architectureVarious options for easy power supply via micro USB, external power supplies or batteries - High quality, low cost, high availabilityComprehensive SDK, software examples and documentation3-pin JTAG connector40-pin pre-soldered pin headerDetailed information about the RP2040 microcontroller can be found in the RP2040 datasheet. The most important features are:Dual-core Cortex M0+ with up to 133MHzOn-chip PLL enables variable core frequency264kByte multi-bank high performance SRAMExternal Quad SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cacheHigh-performance full crossbar bus structureOn-board USB1.1 (device or host)30 multifunction I/O (four can be used for ADC)1.8-3.3 V I/O voltage12-bit 500ksps analogue-to-digital converter (ADC)Various digital peripherals2 x UART, 2 × I2C, 2 × SPI, 16 x PWM channels1 x timer with 4 alarms, 1 x real-time clock2 x programmable I/O blocks (PIO), 8 state machines in totalFlexible, user-programmable high-speed I/OCan emulate interfaces such as SD card and VGAFor more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.
€7.20

Sofort verfügbar · 100+ Stück · 1-3 days

%
Raspberry Pi Pico, RP2040 microcontroller board
Raspberry Pi Pico, RP2040 microcontroller board
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support For more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.
€3.39 €4.10 (17.32% gespart)

Sofort verfügbar · 100+ Stück · 1-3 days

Pin header set for Raspberry Pi Pico, colour-coded, on the side
Pin header set for Raspberry Pi Pico, colour-coded, on the side
This colour-coded pin header set is ideal for use with the Raspberry Pi Pico.All pins are colour-coded with corresponding functions and make prototyping and hacking easier.This version comes with colour coding on the side and 5 coding colours.Technical data:suitable for Raspberry Pi Pico2x 20 pin and 1x pin header2.54mm pin spacing (pitch)Pin height: 3 / 6 mmTotal height: approx. 11 mm
€1.10

Sofort verfügbar · 100+ Stück · 1-3 days

Waveshare entry-level sensor kit for Raspberry Pi Pico: expansion board with 15 modules + accessories
Waveshare entry-level sensor kit for Raspberry Pi Pico: expansion board with 15 modules + accessories
Raspberry Pi Pico starter sensor kit, including pico expansion board and 15 common modules, all-in-one design The Raspberry Pi Pico starter sensor kit includes a pico expansion board and 15 common modules such as LEDs, buttons, buzzers, etc. The kit can be used as a whole or individually. The kit can be used as a whole or the modules can be used individually. Features at a glance Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards All-in-one design, all modules are connected to Pico via PCB circuit board holes, no soldering or wiring required. Includes 15 common modules such as LED, buttons, buzzer, etc., which can be used separately Online development resources and manual available (examples for Raspberry Pi Pico C/C++ and MicroPython) Compatibility Raspberry Pi Pico H Raspberry Pi Pico W-M RP2040-Plus-M ESP32-S3-Pico-M Scope of delivery 1x Pico-Sensor-Kit-B 1x IR remote control 15x PH2.0 double plug 4PIN cable 5x PH2.0 4PIN cable Note: The PH2.0 cables are required to establish the connection with the Pico after the modules have been disconnected.
€44.80

Sofort verfügbar · 1 Stück · 1-3 days

Breadboard with 830 contacts
Breadboard with 830 contacts
Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance 830 contacts - Offers extensive connection options for components. Pitch: 2.54mm - Standard dimension for compatible plug-in options. Mounting: Double-sided adhesive tape - Simple and stable mounting. Technical data Number of contacts: 830 Dimensions: 165 x 55mm Grid dimension: 2.54mm Material: ABS plastic Mounting option: Double-sided adhesive tape on the back Can be plugged together: Latches for connecting several boards Scope of delivery 1 x breadboard with 830 contacts
€1.90

Sofort verfügbar · 61 Stück · 1-3 days

1.3 inch LCD display module for Raspberry Pi Pico, 65K colours, 240x240, SPI
1.3 inch LCD display module for Raspberry Pi Pico, 65K colours, 240x240, SPI
240x240 resolution, 65K RGB colours, clear and colourful display effect SPI interface, requires minimal IO pins 1x joystick and 4x user buttons for easy interaction Detailed development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) in the Waveshare Wiki Waveshare specifications Operating voltage 2,6 ~ 5,5V Resolution 240×240 pixels Communication interface 4-wire SPI Display size 23.40 × 23.40 mm Display panel IPS Pixel size 0.0975 × 0.0975 mm Driver ST7789 Dimensions 52.00 × 26.50 mm WIKI: Pico-LCD-1.3
€6.90

Sofort verfügbar · 19 Stück · 1-3 days

Pico Omnibus (Dual Expander)
Pico Omnibus (Dual Expander)
Double up your GPIO pins and connect two add-ons to a single Raspberry Pi Pico - with our expansive Pico Omnibus! Spoilt for choice on which Pico add-on to use? With the Pico Omnibus you can connect two Pico packs or bases at once*, or you can use the extra set of male GPIO pins, to connect other devices, jumper wires or circuits - very useful for prototyping. We've labelled all three connectors with useful labels, so you can be sure that all those lovely wires are routed to the right places. We've also added a couple of little feet, to keep everything firmly in place. A Raspberry Pi Pico is not included! Features One landing area with labelled socket strips for connecting to your Pico Two landing areas with labelled (mirrored) pin headers for attaching extensions 4x rubber feet Compatible with Raspberry Pi Pico 99% assembled - only the feet need to be glued on! Fully assembled No soldering required Dimensions: approx. 94mm x 52 mm x 12mm (including pin headers) Notes * When using multiple Pico add-ons, you must be aware of data pin conflicts - we recommend using pinout.xyz or taking a look at the shop page of the respective add-on! * If you connect a Pico base to the Pico omnibus, you should do this with a jumper (male/female) so that everything remains manageable and not everything is upside down!
€9.90

Sofort verfügbar · 3 Stück · 1-3 days

Raspberry Pi Pico, RP2040 microcontroller board, with headers
Raspberry Pi Pico, RP2040 microcontroller board, with headers
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. This version comes with populated pin headers (H=header) and a 3-pin JTAG connector. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support3-pin JTAG connector40-pin pre-soldered pin header Further information about the Raspberry Pi Pico and how to get started can be found at https://www.raspberrypi.org/documentation/pico/getting-started/.
€5.50

Sofort verfügbar · 55 Stück · 1-3 days

Raspberry Pi Pico Light Starter Kit, consisting of Pico, official cable and pin headers
Raspberry Pi Pico Light Starter Kit, consisting of Pico, official cable and pin headers
The Raspberry Pi Pico Light Starter Kit consists of the following components: 1x Raspberry Pi PicoRaspberryPi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support Further information about the Raspberry Pi Pico and how to get started can be found at https://www.raspberrypi.org/documentation/pico/getting-started/.------------------ 1x pin header set for Raspberry Pi PicoSetconsisting of 2x 20 pin and 1x 3 pin pin header, suitable for Raspberry Pi Pico.Technical data1 pin row with 20 pins / 3 pins2.54mm pin spacing (pitch)Pin height: 3 / 6 mm Total height: approx. 11 mmseparable after each pinmax. voltage load: 250V AC/DCmax. current load: 3A AC/DCmax. contact resistance: 20mΩmin. Insulation resistance: 1,000MΩ------------------1 x official Raspberry Pi Micro USB cable, red, 1.0mThis official Micro USB cable is designed for use with the Raspberry Pi Pico. It has been designed for optimum performance and functionality with the Raspberry Pi. Technical specifications Standard USB A 2.0 plug - micro USB 2.0 type B plug Nickel-plated contacts Cable length: 1m Colour: red
€6.40

Sofort verfügbar · 100+ Stück · 1-3 days

Produktgalerie überspringen

Mehr von seeed

Acrylic housing for Seeeduino XIAO and Expansion Board
Acrylic housing for Seeeduino XIAO and Expansion Board
€3.10

Sofort verfügbar · 1 Stück · 1-3 days

ReSpeaker 2-Mics HAT for Raspberry Pi
ReSpeaker 2-Mics HAT for Raspberry Pi
€14.20

Sofort verfügbar · 6 Stück · 1-3 days

seeed 4-channel SPDT relay HAT for Raspberry Pi
seeed 4-channel SPDT relay HAT for Raspberry Pi
€23.90

Artikel aktuell nicht lieferbar

Details
seeed Acryl-Seitenpaneele für NVIDIA Jetson Nano, re_computer Gehäuse, 1mm, Abstandshalter, schwarz
seeed Acryl-Seitenpaneele für NVIDIA Jetson Nano, re_computer Gehäuse, 1mm, Abstandshalter, schwarz
€2.50

Sofort verfügbar · 8 Stück · 1-3 days

Seeed Crazyflie AI-deck V1.1, GAP8 RISC-V MCU, ESP32 WiFi, UART, ML, for drones, 5V
Seeed Crazyflie AI-deck V1.1, GAP8 RISC-V MCU, ESP32 WiFi, UART, ML, for drones, 5V
€189.90

Sofort verfügbar · 4 Stück · 1-3 days

seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
€68.80

Artikel aktuell nicht lieferbar

Details
seeed Grove - 0.54" Quad alphanumeric LED display, red
seeed Grove - 0.54" Quad alphanumeric LED display, red
€10.90

Sofort verfügbar · 20 Stück · 1-3 days

seeed Grove - 0.96" OLED Display (SSD1315)
seeed Grove - 0.96" OLED Display (SSD1315)
€6.60

Artikel aktuell nicht lieferbar

Details
seeed Grove - 1-wire thermocouple amplifier (MAX31850K)
seeed Grove - 1-wire thermocouple amplifier (MAX31850K)
€18.80

Sofort verfügbar · 11 Stück · 1-3 days

seeed Grove - 1.12'' OLED Display v2
seeed Grove - 1.12'' OLED Display v2
€16.50

Artikel aktuell nicht lieferbar

Details
seeed Grove - 10-Axis IMU Sensor Module (MPU-9250+BMP280) v2.0
seeed Grove - 10-Axis IMU Sensor Module (MPU-9250+BMP280) v2.0
€17.20

Artikel aktuell nicht lieferbar

Details
seeed Grove - 125KHz RFID reader
seeed Grove - 125KHz RFID reader
€10.90

Artikel aktuell nicht lieferbar

Details
seeed Grove - 16-channel PWM driver (PCA9685)
seeed Grove - 16-channel PWM driver (PCA9685)
€14.70

Artikel aktuell nicht lieferbar

Details
seeed Grove - 16x2 LCD (black on red)
seeed Grove - 16x2 LCD (black on red)
€6.10

Sofort verfügbar · 9 Stück · 1-3 days

seeed Grove - 16x2 LCD (black on yellow)
seeed Grove - 16x2 LCD (black on yellow)
€6.10

Sofort verfügbar · 6 Stück · 1-3 days

seeed Grove - 16x2 LCD (white on blue)
seeed Grove - 16x2 LCD (white on blue)
€6.10

Sofort verfügbar · 19 Stück · 1-3 days

seeed Grove - 16x2 LCD RGB Backlight - Full Colour Display
seeed Grove - 16x2 LCD RGB Backlight - Full Colour Display
€16.50

Sofort verfügbar · 42 Stück · 1-3 days

seeed Grove - 2-channel SPDT relay module
seeed Grove - 2-channel SPDT relay module
€9.40

Sofort verfügbar · 1 Stück · 1-3 days

seeed Grove - 2.13" ePaper / E-Ink display, three-coloured (red / black / white)
seeed Grove - 2.13" ePaper / E-Ink display, three-coloured (red / black / white)
€21.20

Artikel aktuell nicht lieferbar

Details
%
seeed Grove - 3-axis analogue accelerometer ±20g, ADXL356B
seeed Grove - 3-axis analogue accelerometer ±20g, ADXL356B
€70.90 €79.00 (10.25% gespart)

Artikel aktuell nicht lieferbar

Details
seeed Grove - 3-Axis Analogue Accelerometer ±3g (ADXL335)
seeed Grove - 3-Axis Analogue Accelerometer ±3g (ADXL335)
€13.20

Sofort verfügbar · 2 Stück · 1-3 days

%
seeed Grove - 3-Axis Analogue Accelerometer ±40g (ADXL356C)
seeed Grove - 3-Axis Analogue Accelerometer ±40g (ADXL356C)
€70.90 €80.90 (12.36% gespart)

Sofort verfügbar · 2 Stück · 1-3 days

seeed Grove - 3-Axis Digital Accelerometer (LIS3DHTR)
seeed Grove - 3-Axis Digital Accelerometer (LIS3DHTR)
€4.90

Sofort verfügbar · 2 Stück · 1-3 days

seeed Grove - 3-Axis Digital Accelerometer ±1.5g (MMA7660FC)
seeed Grove - 3-Axis Digital Accelerometer ±1.5g (MMA7660FC)
€10.10

Artikel aktuell nicht lieferbar

Details
seeed Grove - 3-Axis Digital Accelerometer ±16g (ADXL345)
seeed Grove - 3-Axis Digital Accelerometer ±16g (ADXL345)
€10.10

Sofort verfügbar · 2 Stück · 1-3 days

seeed Grove - 3-Axis Digital Accelerometer ±16g, Ultra-low Power (BMA400)
seeed Grove - 3-Axis Digital Accelerometer ±16g, Ultra-low Power (BMA400)
€9.10

Sofort verfügbar · 3 Stück · 1-3 days

seeed Grove - 3-Axis Digital Accelerometer ±40g (ADXL357)
seeed Grove - 3-Axis Digital Accelerometer ±40g (ADXL357)
€81.10

Artikel aktuell nicht lieferbar

Details
seeed Grove - 3-axis digital gyroscope (ITG3200)
seeed Grove - 3-axis digital gyroscope (ITG3200)
€17.70

Sofort verfügbar · 7 Stück · 1-3 days

seeed Grove - 3-in-1 CO2, Temperature & Humidity Sensor (SCD30)
seeed Grove - 3-in-1 CO2, Temperature & Humidity Sensor (SCD30)
€56.90

Sofort verfügbar · 1 Stück · 1-3 days

seeed Grove - 4 Port I2C Hub
seeed Grove - 4 Port I2C Hub
€3.00

Sofort verfügbar · 9 Stück · 1-3 days

seeed Grove - 4-channel SPDT relay module
seeed Grove - 4-channel SPDT relay module
€13.10

Artikel aktuell nicht lieferbar

Details
seeed Grove - 4-character LED display, red, TM1637
seeed Grove - 4-character LED display, red, TM1637
€6.00

Sofort verfügbar · 21 Stück · 1-3 days

seeed Grove - 433MHz Simple RF Link Kit
seeed Grove - 433MHz Simple RF Link Kit
€12.90

Artikel aktuell nicht lieferbar

Details
seeed Grove - 5mm LED, blue
seeed Grove - 5mm LED, blue
€1.90

Sofort verfügbar · 28 Stück · 1-3 days

seeed Grove - 5mm LED, green
seeed Grove - 5mm LED, green
€1.90

Sofort verfügbar · 26 Stück · 1-3 days

Kunden kauften auch
LED traffic light module with 3x 8mm LED (red, yellow, green), 5V
LED traffic light module with 3x 8mm LED (red, yellow, green), 5V
This traffic light-shaped LED module is ideal for anyone who wants to gain initial experience in controlling LEDs with a developer board such as Raspberry Pi or Arduino. The three 8mm LEDs can be controlled individually via pins. The integrated resistors ensure safe operation directly at 5V.Features: - Operating voltage: 5V DC- LED size: 8mm- LED colours: red, yellow, green- Dimensions: approx. 56 x 21 x 11mm- 3mm mounting holes
€1.10

Sofort verfügbar · 50 Stück · 1-3 days

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne. Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt.  RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren. Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen. Technische Daten Formfaktor: 21 mm × 51 mm CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins Peripherie: 2 × UART 2 × SPI-Controller 2 × I2C-Controller 24 × PWM-Kanäle 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung 12 × PIO-Zustandsmaschinen Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2 Eingangsspannung: 1,8–5,5V DC Betriebstemperatur: -20°C bis +85°C Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion Downloads Raspberry Pi Pico 2 Product Brief Raspberry Pi Pico 2 MicroPython SDK Raspberry Pi Pico 2 C/C++ SDK RP2350 Datenblatt
€7.50

Sofort verfügbar · 100+ Stück · 1-3 days

Pin header set for Raspberry Pi Pico, colour-coded, on the side
Pin header set for Raspberry Pi Pico, colour-coded, on the side
This colour-coded pin header set is ideal for use with the Raspberry Pi Pico.All pins are colour-coded with corresponding functions and make prototyping and hacking easier.This version comes with colour coding on the side and 5 coding colours.Technical data:suitable for Raspberry Pi Pico2x 20 pin and 1x pin header2.54mm pin spacing (pitch)Pin height: 3 / 6 mmTotal height: approx. 11 mm
€1.10

Sofort verfügbar · 100+ Stück · 1-3 days

seeed Grove - Magnetic switch / reed contact
seeed Grove - Magnetic switch / reed contact
Seeed Grove - Magnetic Switch The Grove - Magnetic Switch module is a Grove-compatible magnetic switch module based on an encapsulated dry reed switch CT10. The CT10 is a single pole, single throw (SPST) switch type with normally open ruthenium contacts. The sensor is a bi-directional type and can be activated by an electromagnet, a permanent magnet or a combination of both. This magnetic switch module makes it possible to switch circuits on or off based on proximity. The Grove - Magnetic Switch Module is used as a proximity, safety alarm, level, flow or pulse counter sensor. Thanks to its low external component count, robust encapsulation and compatibility with the Grove interface, it is easy to integrate. The robust contacts of the CT10 switch enable a switching power of up to 10 watts, a maximum switching voltage of 140 V AC and a switching current of up to 500 mA. The module can be used in safety systems, automation projects or to control devices based on magnetic field detection. It can be connected directly to a microcontroller such as Arduino or Seeeduino using a Grove cable. Features at a glance Grove-compatible magnetic switch module Based on encapsulated dry reed switch CT10 Robust encapsulation and minimal external component requirements Switching capacity up to 10W Simple connection via Grove interface Compatibility with Arduino Seeeduino Other microcontrollers with Grove interface Technical specifications Dimensions: 90mm x 50mm x 12mm Weight: 8g Operating voltage: 5V Switching power: 10W Maximum switching voltage AC (RMS): < 140V Maximum switching current DC: < 500mA Carrying current DC: < 0.5A Contact resistance: < 200mΩ Insulation resistance: >10⁶ MΩ Operating temperature range: -40 to 125°C Actuation range: 10-40AT Other data Battery not included Scope of delivery 1x Grove - Magnetic Switch 1x Grove cable Links Magnetic Switch circuit diagram and files (ZIP) Eagle file version 1.3 PDF file circuit diagram version 1.3 CT10 Reed Switch data sheet CDC files
€3.00

Sofort verfügbar · 1 Stück · 1-3 days

seeed Grove - Wrapper 1x1, blue, pack of 4
seeed Grove - Wrapper 1x1, blue, pack of 4
Seeed Grove - Blue Wrapper 11 (4 PCS pack) Grove - BlueWrapper 11 is a module mounting system specifically designed to securely mount and integrate Grove modules into Lego or Makeblock based projects. The design of the wrapper utilises a semi-open housing, which does not restrict the use of Grove modules. The wrapper protects the modules and facilitates the presentation of projects in a structured way. The mechanical design allows easy mounting and dismounting of the modules. The product offers flexible mounting options and supports screw mounting with M2 or M4 screws. The ability to connect the wrappers like Lego modules allows a modular construction system to be created. The wrappers are available in different colours such as blue, green, yellow and red, allowing projects to be colour-coded. Grove - Blue Wrapper 1*1 can be used to safely build electronic projects, especially those based on Lego or Makeblock environments. The flexibility of the attachment simplifies the maintenance and replacement of Grove modules. The semi-open design ensures that module functions remain unrestricted while providing protection and stability for the project. Typical applications include DIY projects, robotics and educational applications. The Grove wrapper system is suitable for the protection, presentation and modular construction of electronic projects. It facilitates the integration of Grove modules into existing modular systems and ensures secure fastening. The option of colour coding simplifies the organisation of complex circuits. Features at a glance Semi-open design allows unrestricted access to Grove modules Compatible with Lego and Makeblock systems Flexible quick release for easy installation and replacement of modules Support for screw connection with M2 and M4 screws Colour differentiation through different wrapper colours Compatibility Grove modules Lego systems Makeblock systems Technical Data Dimensions: 25mm x 25mm x 13mm Material: ABS Colours: Blue, Green, Yellow, Red Weight: 25g (total for the set) Battery: Not included Other data Design supports modular extensions through Lego-like connection options Scope of delivery 4x Grove - BlueWrapper 1*1 Links Mechanical diagram Assembly instructions
€1.90

Sofort verfügbar · 20 Stück · 1-3 days

seeed Grove - Wrapper 1x1, green, pack of 4
seeed Grove - Wrapper 1x1, green, pack of 4
Seeed Grove - Green Wrapper 11 (4 PCS pack) Grove - Green Wrapper 11 is a module mounting system specifically designed to securely mount and integrate Grove modules into Lego or Makeblock based projects. The design of the wrapper utilises a semi-open housing, which does not restrict the use of Grove modules. The wrapper protects the modules and facilitates the presentation of projects in a structured way. The mechanical design allows easy mounting and dismounting of the modules. The product offers flexible mounting options and supports screw mounting with M2 or M4 screws. The ability to connect the wrappers like Lego modules allows a modular construction system to be created. The wrappers are available in different colours such as blue, green, yellow and red, allowing projects to be colour-coded. Grove - Green Wrapper 1*1 can be used to safely build electronic projects, especially those based on Lego or Makeblock environments. The flexibility of the attachment simplifies the maintenance and replacement of Grove modules. The semi-open design ensures that module functions remain unrestricted while providing protection and stability for the project. Typical applications include DIY projects, robotics and educational applications. The Grove wrapper system is suitable for the protection, presentation and modular construction of electronic projects. It facilitates the integration of Grove modules into existing modular systems and ensures secure fastening. The option of colour coding simplifies the organisation of complex circuits. Features at a glance Semi-open design allows unrestricted access to Grove modules Compatible with Lego and Makeblock systems Flexible quick release for easy installation and replacement of modules Support for screw connection with M2 and M4 screws Colour differentiation through different wrapper colours Compatibility Grove modules Lego systems Makeblock systems Technical Data Dimensions: 25mm x 25mm x 13mm Material: ABS Colours: Blue, Green, Yellow, Red Weight: 25g (total for the set) Battery: Not included Other data Design supports modular extensions through Lego-like connection options Scope of delivery 4x Grove - Green Wrapper 1*1 Links Mechanical diagram Assembly instructions
€1.90

Sofort verfügbar · 30 Stück · 1-3 days

seeed Grove - Wrapper 1x2, blue, pack of 4
seeed Grove - Wrapper 1x2, blue, pack of 4
Seeed Grove - Wrapper for LEGO and Makeblock Modules Grove - Wrapper is primarily intended to protect Grove modules. The design as a semi-open space does not affect the use of Grove modules. This saves effort when customising modules and makes it easy to present projects. The use of the Grove wrapper ensures a clear and tidy presentation. In addition, compatibility with LEGO bricks, Makeblock and other systems means that the project can be flexibly expanded and adapted to different environments. The mechanical design of the Grove - Wrapper makes it easy to assemble and disassemble the modules. Grove - Wrapper utilises a flexible locking system that facilitates the installation and replacement of Grove modules. The ability to use different coloured wrappers and connect the modules together like LEGO elements makes the product particularly suitable for building electronic LEGO projects. Features at a glance Construction of electronic LEGO projects with coloured wrappers Compatible with LEGO and Makeblock modules Flexible locking system for easy installation and replacement of Grove modules Semi-open space protects and does not interfere with the function of the modules Compatibility with LEGO modules Makeblock modules Technical data Dimensions of large wrapper module: 50 × 25 × 13 mm Dimensions of small wrapper module: 25 × 25 × 13 mm Material: ABS Colour: Blue Product dimensions packaging: 110 mm x 80 mm x 15 mm Weight: 25 g Power supply: External power source required (no battery included) Other data Suitable for easy presentation of projects Promotes creative extensions through connection with LEGO and Makeblock Scope of delivery 4x Grove - Blue Wrapper 1*2 Links Example project Connected LEGO Desk Houses
€1.90

Sofort verfügbar · 54 Stück · 1-3 days

seeed Grove - Universal 4 pin cable, fixing, 30cm, pack of 5
seeed Grove - Universal 4 pin cable, fixing, 30cm, pack of 5
Seeed Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack) The Grove Universal 4 Pin Buckled 30cm Cable was specially developed for the Grove system to connect so-called Twigs (sensors, actuators or modules) to a Grove-compatible base plate or other Grove-compatible development boards. The cables have a four-pin plug with a snap-lock mechanism (buckled connector), which ensures a secure hold in the socket and prevents unintentional disconnection. The length is 30 cm. The cable consists of high-quality copper wires with wear-resistant sheathing. The cable design is designed for uncomplicated use in prototyping and electronic projects. The 30 cm version described here is supplied in a pack of five. It is particularly suitable for applications where greater distances between modules are required or more complex assemblies are to be connected. The product ensures the connection between Grove modules and control boards. The four-pole structure typically supports data transmission, power supply and control lines. The buckled connector with 2.0 mm pitch provides a stable mechanical connection. The high flexibility and durability of the materials used make it suitable for use in moving or mechanically stressed structures. Features at a glance 30 cm long Grove connection cable with 4-pin buckled connector Suitable for Grove-compatible base plates and modules High-quality copper wires with wear-resistant sheathing Compatibility Grove base plate (Seeed Studio) Grove-compatible development boards All Grove twigs (sensors, actuators, modules) Technical data Length: 300 mm Width: 9.6 mm Height: 4 mm Weight: 45 g (total) Other data Cable series also available in 5 cm, 20 cm, 30 cm and 40 cm Scope of delivery 5x Grove - Universal 4 Pin Buckled 30cm Cable Links How To Choose The Right Cable Preface - Getting Started Introduction to Grove
€3.00

Sofort verfügbar · 44 Stück · 1-3 days

seeed Grove - Encoder
seeed Grove - Encoder
seeed Grove - Encoder This module is an incremental encoder with Grove interface that generates an electrical pulse signal when the axis rotates. The Grove encoder is part of the Grove series and has a standardised Grove interface. It can be used in projects where a rotatable input option is required, for example as a volume control or for navigation in menus. The design allows 360-degree rotation. Although the encoder could also generate a signal when pressed down, this is not output due to the limitations of the Grove signal connection. This module is used to convert rotary movements into digital signals. The encoder recognises the direction of rotation and speed and outputs corresponding electrical pulses. It is suitable for user interfaces, controls and selection functions. Thanks to the Grove interface, the encoder can be easily integrated into common microcontroller projects. Applications include control controllers, menu control panels or analogue simulations of potentiometers. The encoder is used to translate rotary movements into electrical signals. These signals can be used, for example, to control a volume control, for menu selection or for navigation in applications. Features at a glance Incremental encoder for digital rotary signals 360° rotatable with defined signal output Grove-compatible connection for easy integration Compatibility with Arduino Seeeduino Technical specifications Operating voltage: 4.5-5.5 V Current consumption: 10-30 mA Module dimensions: 20 mm x 20 mm Overall dimensions: 130 mm x 90 mm x 22 mm Weight: 12 g Other data Signal not available with pressure due to Grove cable restriction Scope of delivery 1x Grove - Encoder Links to Eagle Design files TimerOne library Encoder library Circular LED example Arduino Rotary Encoder Guide
€5.00

Sofort verfügbar · 1 Stück · 1-3 days

1.3 inch LCD display module for Raspberry Pi Pico, 65K colours, 240x240, SPI
1.3 inch LCD display module for Raspberry Pi Pico, 65K colours, 240x240, SPI
240x240 resolution, 65K RGB colours, clear and colourful display effect SPI interface, requires minimal IO pins 1x joystick and 4x user buttons for easy interaction Detailed development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) in the Waveshare Wiki Waveshare specifications Operating voltage 2,6 ~ 5,5V Resolution 240×240 pixels Communication interface 4-wire SPI Display size 23.40 × 23.40 mm Display panel IPS Pixel size 0.0975 × 0.0975 mm Driver ST7789 Dimensions 52.00 × 26.50 mm WIKI: Pico-LCD-1.3
€6.90

Sofort verfügbar · 19 Stück · 1-3 days

Breadboard with 400 contacts
Breadboard with 400 contacts
Breadboard with 400 contacts This breadboard makes it possible to quickly build simple, on-the-fly circuits. It can be extended by stringing several units together. The use of ABS plastic and the latches on the sides allow flexible and stable assembly. Features at a glance Enables quick and easy assembly of flying circuits. Several boards can be connected using the latches on the sides. Technical data Contacts: 400 Dimensions: 83 x 55 mm Grid: 2.54 mm Material: ABS plastic Fastening: Double-sided adhesive tape on the back Scope of delivery 1x breadboard with 400 contacts
€1.50

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi
Arduino
Yubico
Idealo
Geizhals.de
Cookie-Voreinstellungen
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...