Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support For more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.

This splash case, suitable for Raspberry Pi Zero, consists of a 3-piece clip construction with micro SD card cover and embossed Raspberry Pi Foundation logo, which acts as a ventilation point for heat dissipation. Each case features a GPIO cut-out on the top and bottom which can be easily removed with a sharp tool, or left in place when the GPIO is not required. There are also 2 x M3 mounting holes on the back of the case so that the Pi Zero can be effortlessly attached wherever it is needed, e.g. to a belt/dog/table/wall. The case also offers two internal microSD card slots to store additional operating system images. Features Professional, fully injection moulded PC ABS case suitable for Raspberry Pi Zero3-piece clip-together construction (top, bottom & micro SD card cover)Removable micro SD card coverGPIO slot (top and bottom)Embossed Raspberry Pi Foundation logoEmbossed connector labels (MicroSD, camera, USB, power, HDMI)Raspberry Pi Zero is clipped in (no screws)Power LED cut-outTwo-point M3 screw mount for attachment to belts for wearables or walls for wallables ;)2 x internal micro SD card holder with clip-inDrop resistantMade in the UK Suitable for Raspberry Pi Zero v1.1 Raspberry Pi Zero v1.3 Raspberry Pi Zero W Raspberry Pi Zero WH Note: The Raspberry Pi is for presentation purposes only and is not included in the scope of delivery!

SenseCAP S2108 Soil moisture, temperature and pore EC sensor The SenseCAP S2108 is a sensor for the simultaneous measurement of soil moisture, temperature and electrical conductivity (pore EC). It is used for precise monitoring of soil conditions in applications such as agriculture, horticulture, greenhouse control, water management and environmental research. By combining three measurement parameters, the device enables a comprehensive assessment of soil quality and supports data-based decisions on irrigation, fertilisation and land management. The device measures soil moisture in the range from 0 to 100 % (VWC), soil temperatures from -40 °C to 80 °C and electrical conductivity up to 32 ms/cm. The data obtained helps to control water consumption, monitor nutrient levels and analyse the salt concentration in the soil, which is crucial for plant growth. The sensor uses LoRaWAN technology with a range of up to 10 km in free line of sight and around 2 km in urban environments. The IP66-certified housing offers protection against dust and water and is suitable for extreme outdoor use. The Bluetooth interface in conjunction with the SenseCAP Mate app allows easy setup and remote configuration without specialised technical knowledge. It is powered by a replaceable ER34615 battery (D-size) with up to 10 years of operation. The SenseCAP S2108 is designed for use in automated and long-term monitored irrigation systems. Typical applications include the precise control of water supply in agriculture, moisture monitoring in greenhouses, drought detection in open landscapes and the long-term collection of soil parameters in environmental research. The device measures the moisture content in the soil, the temperature and the salt content based on the electrical conductivity. This information helps to assess soil quality and organise the water supply efficiently. The sensor can also indicate changes in the nutrient balance, which can be measured by the EC value (electrical conductivity). In simple terms, the sensor recognises how wet the soil is, how warm it is and how many salts are in it. This enables targeted irrigation and fertilisation. Features at a glance Measures soil moisture (0-100 %), soil temperature (-40 to 80 °C) and pore EC (0-32 ms/cm) Precise data to optimise plant irrigation and improve soil fertility Robust IP66-certified housing for extreme environments Transmission range of up to 10 km in line-of-sight environments Simple OTA configuration via SenseCAP Mate app Supports LoRaWAN v1.0.3 and multiple frequency plans Replaceable battery with up to 10 years runtime Compatibility LoRaWAN gateways (e.g. SenseCAP M2 Multi-Platform Gateway) Networks such as The Things Network, Loriot and Chirpstack Helium network MQTT and HTTP API interfaces Technical specifications Soil moisture: 0-100 %, accuracy ±2 % (0-50 %) Soil temperature: -40 to 80 °C, accuracy ±0.5 °C Pore EC: 0-32 ms/cm, accuracy depends on the Hilhorst calculation Microcontroller: Wio-E5 Protocol: LoRaWAN v1.0.3 Class A Sensitivity: -136 dBm @ SF12 BW=125 kHz IP protection class: IP66 Weight: 610 g Cable length: 5 metres (separable plug for easy installation) Certificates: CE, FCC, RoHS, TELEC Other data Battery: Type ER34615 (D-size, non-rechargeable), 19 Ah Battery life: Up to 10 years Areas of application: Agriculture, irrigation, drought monitoring, greenhouse and green space management Scope of delivery 1x SenseCAP S2108 sensor 1x mounting bracket 1x USB cable type C Links SenseCAP S210X LoRaWAN Sensor Catalogue User Manual CE/FCC certificate report

Adafruit PyPortal Titano The Adafruit PyPortal Titano is an IoT development board with a 3.5-inch TFT colour display (320 × 480 pixels) and resistive touchscreen. It is based on the Microchip ATSAMD51J20 microcontroller and an Espressif ESP32 Wi-Fi coprocessor with integrated TLS/SSL support. The board has a speaker, a light sensor, a NeoPixel RGB LED, a microSD card slot, 8 MB flash memory and connectors for I2C and two analogue/digital pins. It supports open source hardware and software, including CircuitPython and Arduino. The device is recognised as a USB drive, allowing the Python code to be edited in any IDE or text editor. The PyPortal Titano is suitable for developing customised touchscreen interfaces that can communicate via Wi-Fi with APIs to retrieve information such as news, weather data or images. It can also be used as a web-based conference badge. Features at a glance 3.5-inch TFT colour display (320 × 480 pixels) with resistive touchscreen Microchip ATSAMD51J20 microcontroller Espressif ESP32 Wi-Fi coprocessor with TLS/SSL support Speaker, light sensor, NeoPixel RGB LED microSD card slot, 8 MB flash memory Connectors for I2C and two analogue/digital pins Support for CircuitPython and Arduino USB-C connection Compatibility Arduino CircuitPython Technical specifications Display: 3.5-inch TFT colour display with 320 × 480 pixels Touch screen: Resistive Microcontroller: Microchip ATSAMD51J20 Wi-Fi: Espressif ESP32 with TLS/SSL support Memory: 8 MB Flash Sensors: Light sensor, NeoPixel RGB LED Audio: Integrated loudspeaker Expandability: Connectors for I2C and two analogue/digital pins Memory cards: microSD card slot USB: USB-C port Other data Product ID: 4444 RoHS 2 2011/65/EU compliant RoHS 2 2015/863/EU compliant Scope of delivery Adafruit PyPortal Titano Board

Dieser Combo-Konverter ermöglicht die Verbindung einer M.2 PCIe NVMe SSD oder einer M.2 SATA SSD über USB an einen Computer oder ein Notebook. Der Konverter ist mit den SSD-Formaten 2280, 2260, 2242 und 2230 kompatibel und unterstützt sowohl M.2 SSDs mit PCIe (NVMe) als auch SATA-Schnittstelle. Mit dem USB 3.2 Gen 2-Anschluss sind Datentransferraten von bis zu 10 Gbps möglich. Er eignet sich hervorragend als Testequipment durch den direkten Einbau der SSD und die Plug & Play-Funktionalität. Merkmale im Überblick Kompatibel mit M.2 PCIe NVMe und SATA SSDs Unterstützt Datentransferraten von bis zu 10 Gbps Plug & Play, kein zusätzliches Gehäuse notwendig Technische Daten 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Typ-A Stecker 1 x 67-Pin M.2 Key M Slot Chipsatz: Realtek RTL9210B Unterstützte Formate: 2280, 2260, 2242, 2230 mit Key M oder Key B+M Datentransferrate: bis zu 10 Gbps Abmessungen (LxBxH): ca. 110 x 22 x 6 mm Systemvoraussetzungen Android 11.0 oder neuer, Chrome OS, Linux Kernel 5.13 oder neuer, Mac OS 12.3.1 oder neuer, Windows 8.1/8.1-64/10/10-64/11 PC oder Notebook mit einem freien USB Typ-A Port Lieferumfang 1x M.2 Konverter 1x Befestigungsmaterial 1x Schraubendreher

Sonoff TX ist ein berührungsempfindlicher und intelligenter Lichtschalter. Er kann mit Hilfe einer Anwendung über das WiFi-Netzwerk oder klassisch per Berührung bedient werden. Du kannst das Licht in dem ausgewählten Raum im Haus einschalten, egal wo du dich aufhältst. Hergestellt aus hochwertigen Materialien wie hitzebeständigem ABS und gehärtetem Glas, bietet er Sicherheit und passt perfekt in jeden Raum. Die sanfte Hintergrundbeleuchtung des Schalters unterstreicht dezent sein Design und macht ihn nachts sichtbar.Kontrolle für alle HaushaltsmitgliederMit Hilfe der Anwendung kannst du deine Lichtsteuerung ganz einfach mit anderen Nutzern teilen.ServiceNutzer können angeschlossene Geräte über die kostenlose eWeLink-Anwendung, die auf iOS- und Android-Plattformen verfügbar ist, aus der Ferne bedienen. Dank der Netzwerkverbindung erfolgt die Synchronisierung des Gerätestatus sofort, so dass die App immer aktuelle Daten anzeigt. So behältst du die volle Kontrolle über den übermäßigen Stromverbrauch in deinem Zuhause.Smarte SteuerungDu kannst deine eigenen Zeitpläne festlegen, um deine Geräte zu oder nach einer bestimmten Zeit automatisch ein- oder auszuschalten.Mobile SteuerungDank der Möglichkeit, die Beleuchtung mit der Anwendung zu steuern, kannst du das Licht in deiner Wohnung ganz einfach ein- oder ausschalten, während du unterwegs bist. Die Anwendung ist sehr einfach zu bedienen und erlaubt es dir, einen bestimmten Schalter auszuwählen. Du musst dir keine Sorgen mehr machen, dass das Licht anbleibt.SpezifikationenModellT1EU1C-TXSpannung90~250 V ACMax. Spannung2 A (Kanal)Max. Lastleistung400 WFarbeWeißWiFi802.11 b/g/nVerschlüsselung WiFiWPA-PSK/WPA2-PSKMaterialEchtglas / ABSAnzahl der Kanäle1Abmessungen der Montageöffnung86 mm x 86 mm x 32 mm

DELTACO SMART HOME SH-GLK01, Smart RGB garden lighting with warm white light, black Turn your garden into an eye-catcher with the DELTACO SMART HOME SH-GLK01 garden light set in various colours. Control the smart garden lights via the DELTACO app, Google Assistant or Amazon Alexa and create different moods depending on the time of day. Features at a glance 2 lamps with warm white lighting and 2700 Kelvin 16 million colours can be displayed Dimmer, timer, remote control and colour control Compatible with DELTACO app, Google Assistant and Amazon Alexa IP54 protection class, suitable for outdoor areas Technical specifications Power: Max 6W per bulb Lumen: 500lm per bulb Colour: RGB and warm white White temperature: 2700K Power supply: Max. 48 W WLAN frequency: 2.4 GHz Operating temperature: -20°C to 45°C Other data Expandable to up to 8 lamps on one power supply unit Wireless connections: WiFi and Bluetooth Scope of delivery 2x lamps1x Smart AC adapter 1x 3-in-1 cable, 1x 2m extension cableMounting accessories

These self-adhesive RFID / NFC tags can be used in a variety of ways, for example as triggers for smart home automations, digital business cards or WLAN connect spots. The tags can be read and written to with RFID / NFC readers as well as Android and iOS smartphones. On iOS, for example, they can be used together with the shortcut app to start an automation. Technical data: Chip: Ntag215 Usable capacity: 504 bytes Protocol ISO14443A Operating frequency: 13.56 MHz Read/write distance: 1 - 5 cm Read/write time: 1 - 2 ms Read cycles: > 100,000x Erase cycles: >100,000x Data storage: > 10 years Diameter: 25mmself-adhesive Operating temperature: -20 - 55°C at max 90% humidity Scope of delivery: 6 NFC tags, assorted colours

Mit dem HDMI-Verstärker verlängern Sie ganz einfach Ihre HDMI Verbindung. Er arbeitet vollkommen ohne Netzteil und bezieht den Strom über das HDMI-Kabel. - Anschlüsse: HDMI-A Buchse auf HDMI-A Buchse- Auflösung: bis zu 4K (30 Hz), 1080p (3D)- Unterstützt Farbsampling in den Formaten 4:2:2, und 4:2:0- Unterstüzt: HDCP 1.4, 3D, plug and play- Signalrichtung: Unidirektional (Quelle = IN, Senke = OUT)- HDMI Version: High Speed with Ethernet (HDMI 1.4)- Abwärtskompatibel: zu allen HDMI Standards- Maximale Bandbreite: 10,2 Gbit/s - max. Kabelstrecke Eingang: 20m mit 24AWG (bei 4K30Hz)- max. Kabelstrecke Ausgang: 20m mit 24AWG (bei 4K30Hz) - Gehäuse Material: Metall- Farbe: schwarz

Goobay LED clip-on magnifying lamp, 10 W, black800 lm, adjustable brightness & light colour, 127 mm glass lens, 1.75x magnification, 3 dioptersBrightness and light colour of the magnifying lamp can be adjusted in 6 stages via separate touch panels, max. 800 lm, warm white to daylight white (3500 - 6500 K).Magnifying head of the clamp lamp can be tilted by up to 100° and swivelled by 250°, 127 mm magnifying glass diameter with harmonious LED ring lighting.Cosmetic lamp with standard glass lens (incl. protective cap) with 3 dioptres and 1.75x magnification, can be replaced without tools thanks to quick-release fastenerArticulated arm of the clamp lamp with integrated cable guide ensures a flexible 700 mm working radius.Work magnifier can be used universally, e.g. in cosmetics, as a reading aid or for precision work such as soldering and handicrafts.Also ideal as a table magnifier, desk, drawing or reading lamp with clampThe magnifying lamp holder is suitable for table tops up to 50 mm thick. Replacement table clamp: 64987, matching wall bracket: 64991.Technical specificationsCover type: LensBeam angle: 108 °Connection type: Euro plug (type C, CEE 7/16)Number of LEDs: 60Number of switching cycles: 12500 pcs.Storage: Operating instructionsOutput, min. current (DC): 0.5 AOutput, min. current (DC): 0.5 AOutput power: 10 WOutput voltage (DC): 20 VOutput current: 0.5 AOperating instructions: de, en, fr, it, nl, es, da, sv, pl, csRated service life: 25000 hoursRated luminous flux: 800 lmOperating voltage: 20 V (DC)Width: 650 mmDimmability: dimmableInput voltage (AC): 220-240 VInput current: 0.3 AInput alternating current frequency: 50/60 HzEnergy efficiency class: FColour: blackColour consistency in MacAdam ellipses: 1.8Colour temperature up to: 6500 KColour temperature from: 3500 KColour version: blackColour value component x: 0.313Colour value component y: 0.337Colour rendering index: 80 RaFlicker measurement size (Pst LM): 0.1Weight: 2232 gweighted energy consumption: kWh/1,000 hManufacturer's description: GoobayHeight: 820 mmCable length: 1.5 mLamp life factor: 0.9Bulb type: SMD LEDLight colour: variable/adjustable (RGB)Light source: Light emitting diode (LED)Luminous flux maintenance: 0.96Material: Plastic, metal, glassMax. Power consumption: 10 WMeasured variable for stroboscopic effects (SVM): 0.6Modelkennung: XY12LF-200050VH-EWUseful luminous flux (Φuse ): Useful luminous flux (Φuse ) in a wide cone (120°)Protection class: IP20Protection class: IIIPeak luminous intensity (cd): 273Depth: 205 mmUnfocussed or focussed light: DLSPackaging: de, en, fr, it, es, nl, da, sv, pl, csR9 colour rendering index value: 1

Die dimmbare smarte Glühbirne Yeelight GU10 sorgt nicht nur für fantastisches Licht in deinen Räumen, sondern ermöglicht es dir auch, die Helligkeit nach Belieben einzustellen. Sie ist supereinfach zu installieren und dank Fernsteuerung und Gruppierungsfunktion leicht und komfortabel zu bedienen. Zudem ist die Leuchte energieeffizient. im Standby-Modus verbraucht sie nur 0,23W. Mit ihr brauchst du dir keine Sorgen um hohe Stromrechnungen zu machen. Helligkeit individuell einstellen Eine der wichtigsten Funktionen der Birne ist die Anpassung ihrer Lichtstärke. Nutze diese Möglichkeit, um das Licht ganz nach deinen Wünschen, Bedürfnissen oder für besondere Anlässe zu gestalten. Brauchst du volle Konzentration - zum Beispiel für Arbeit oder Lernen - stelle ein sehr helles Licht ein. Möchtest du entspannen und zur Ruhe kommen? Dann wähle ein weiches Leuchten, das für eine beruhigende Atmosphäre sorgt. Lichtsteuerung aus der Ferne Füge die Glühbirne zur Yeelight-App hinzu und gewinne dadurch Fernsteuerung. So kannst du das Licht mit deinem Smartphone ein- und ausschalten, die Helligkeit justieren, Zeitpläne festlegen oder Szenen kreieren. Das Produkt ist zudem kompatibel mit Google Assistant, Amazon Alexa und Samsung SmartThings, sodass deine smarten Assistenten dir bei der Bedienung helfen können. Birnen gruppieren für noch bequemere Kontrolle Wusstest du, dass du nicht jede Birne einzeln steuern musst? Nutze die Möglichkeit, mehrere Geräte zu gruppieren und beliebig viele gleichzeitig zu bedienen. Mit einem Abstrahlwinkel von 36° ist es zum Beispiel empfehlenswert, mehrere im Wohn- oder Schlafzimmer zu installieren und sie dann zu gruppieren, um ihre Funktion je nach Anlass anzupassen. So erleuchtest du deine Räume genau nach deinem Geschmack. Du wirst sie problemlos installieren Trotz ihrer großen Fähigkeiten ist die Bedienung der Glühbirne extrem einfach. Auch die Installation bereitet keine Probleme. Einfach einschrauben, mit dem WLAN verbinden und in wenigen Schritten konfigurieren ? die Yeelight-App führt dich durch den gesamten Vorgang. In nur wenigen Momenten genießt du die Bequemlichkeit deiner smarten Beleuchtung. Spare Strom und Geld Die energieeffiziente dimmbare GU10-Birne ist umweltfreundlich und kostengünstig im Betrieb. Im Standby-Modus verbraucht sie kaum Strom, und ihre maximale Leistung beträgt nur 4,8W. Das bedeutet, dass du dir um hohe Rechnungen keine Sorgen machen musst. GU10 dimmbar liefert dir nicht nur die Traumbeleuchtung, sondern spart auch Strom und Geld! Technische Daten Hersteller Yeelight Name Yeelight Smart LED Birne GU10 (dimmbar) Modell YLDP004 Abmessungen Ø50x54 mm Gewicht 52,5 g Helligkeit 350 lm Farbtemperatur 2700 K Spannung 220-240 V ~ 50/60 Hz Nennleistung 4,8 W Arbeitstemperatur -10°C - 40°C Betriebsfeuchtigkeit 0-85% rF CRI Ra 80 IP IP20 Leistungsaufnahme im Standby-Modus ≤0,5 W Leistungsfaktor 0,5 Drahtlose Verbindung WLAN IEEE 802.11 b/g/n 2,4GHz Energieeffizienz G Lebensdauer 15 000 h Unterstützte Betriebssysteme Android 4.4 (oder neuere Version) & IOS 9.0 (oder neuere Version) Lichtverteilungswinkel 36° Anzahl der Einheiten pro Paket 4

Assortment box with 2 levelsAn assortment box with two levels and carrying handle. The upper level can be customised with small, adjustable dividers so that the compartment sizes can be adapted to requirements. The second level consists of a large compartment that can be used freely. The box is made of robust plastic and manufactured in Germany. Features at a glance Customisable upper level: Adaptable compartment sizes thanks to adjustable dividers. Large compartment: The second level offers plenty of space for larger items. Robust material: Made from durable plastic. With carrying handle: Easy to transport thanks to the integrated handle. Technical data Material: Plastic Size: 365x295x105mm Made in: Germany Other data Flexibility: The customisable compartments offer flexible use according to requirements. Scope of delivery Assortment box with 2 levels

Speaker cable transparent CU, 100 m, coil/reel - 100 m coil, cross-section 2 x 0.75 mm²Cable: 2x42/0.12 mmPlus/minus pole labelling

Arduino Nano compatible microcontroller, Atmel Atmega328P-AU, 12 digital I/O, 8 analogue I/O, 6 PWM pins, 5-12V The Arduino Nano is equipped with an Atmel Atmega328P-AU microcontroller and offers a wide range of functions for electronics projects. The microcontroller has 12 digital I/O pins (D2 to D13), 8 analogue I/O pins (A0 to A7), 6 PWM output pins and two TTL serial data receive and transmit pins (RX/TX). This configuration enables a wide range of applications. The Arduino Nano can be operated with an operating voltage of 5 to 12 V or a 9V battery. This offers flexibility in power supply, especially in mobile or location-independent projects. An included mini USB cable facilitates connection to a computer or other devices without additional cables. With its compact dimensions of 45 x 18 x 18 mm, the Nano is also suitable for small and space-saving projects. Despite its small size, the board offers sufficient space for structured wiring of the individual components. This Arduino Nano is particularly suitable for developers and hobby electronics engineers who are looking for a reliable and versatile solution for their projects. Thanks to the use of the FTDI FT232RL USB chipset, the Nano is easy to connect and requires no complicated installation. Features at a glance Atmel Atmega328P-AU microcontroller 12 digital I/O pins (D2 to D13) 8 analogue I/O pins (A0 to A7) 6 PWM output pins (D3, D5, D6, D9, D10, D11) TTL serial data receive and transmit pins (RX/TX) Flexible power supply (5 - 12 V or 9V battery) Mini-USB port for easy connection Compact dimensions of 45 x 18 x 18 mm Compatibility Arduino-compatible boards and modules Projects and applications with digital and analogue I/O requirements Technical specifications Operating voltage: 5 - 12 V or 9V battery Digital I/O pins: 12 (D2 - D13) Analogue I/O pins: 8 (A0 - A7) PWM output pins: 6 (D3, D5, D6, D9, D10, D11) TTL serial data receive and transmit pins: RX/TX Microcontroller: Atmel Atmega328P-AU Dimensions: 45 x 18 x 18 mm Other data Supplied fully assembled Scope of delivery Arduino Nano compatible microcontroller Mini-USB cable (approx. 31 cm)

This mini breadboard allows you to quickly build simple, on-the-fly circuits. Several breadboards, even in different colours, can be easily plugged together. Technical data: 170 contacts Dimensions: 35 x 47 x 8.5mm 2.54mm pitch made from high-quality ABS plastic Double-sided adhesive tape on the back of the breadboard Holes in the centre also allow screw mounting Latches on the sides so that several boards can be plugged together

Speaker connection cable with Speakon® compatible plugs - The standard in the PA sector!- PA plug->plug- Bend protection- 2x 1.5 mm² cross-section

M5StickT2 ESP32 Thermal Camera Development Kit (Lepton 3.0) M5StickT2 is a compact infrared thermal imaging camera based on the ESP32-PICO-D4 SoC. It utilises the FLIR Lepton 3.0 Long-Wave Infrared (LWIR) image sensor with a resolution of 160 x 120 pixels. The camera enables non-contact temperature measurement over large areas and delivers stable thermal images with a frame rate of 8.7 Hz. The integrated 1.14-inch IPS colour display with 135 x 240 pixels shows temperature curves, histograms and other operating information. It is controlled via two programmable buttons, a rotary encoder and a reset button. The device contains an ESP32 microcontroller with a clock frequency of up to 240 MHz, an integrated Wi-Fi interface and 4 MB flash memory. A digital MEMS microphone (SPM1423), a 6-axis IMU (MPU6886) and a power management chip (AXP192) are also integrated. Power is supplied via an integrated 300 mAh lithium battery, which is charged via USB-C. An HY2.0-4P connection with I2C/UART and mounting threads (M3 and 1/4 inch) are available for expansion. The housing is made of 3D-printed nylon material. The thermal imaging camera is suitable for vehicle diagnostics, building thermography, inspection of industrial plants and for outdoor observation at night. The image display can be adjusted via various modes (GRAY, GOLDEN, RAINBOW, IRONBLACK, RGB), as can the target tracking (maximum, minimum, centre temperature). The display sensitivity can be fine-tuned using an encoder. The automatic temperature range adjustment allows flexible use in changing environments. M5StickT2 offers an open development environment with support for Arduino IDE, ESP-IDF and PlatformIO. It is operated using the reset button and buttons A and B to control image mode and temperature tracking. The rotary encoder is used for sensitivity adjustment. The power supply is controlled via a 2s (switch on) and 6s (switch off) press of the reset button. Features at a glance FLIR Lepton 3.0 thermal imaging sensor (160 x 120 px) ESP32-PICO-D4 microcontroller with 240 MHz 1.14" TFT IPS display with 135 x 240 px 6-axis IMU (MPU6886) Digital microphone SPM1423 Rotary encoder for sensitivity adjustment HY2.0-4P expansion interface (I2C/UART) Integrated 300 mAh LiPo battery 3D-printed nylon housing with M3 and 1/4" mounting threads Support for up to 5 colour palettes and multiple measurement modes Compatibility with Arduino IDE ESP-IDF PlatformIO Technical specifications Sensor: FLIR Lepton 3.0 Effective resolution: 160 x 120 pixels Field of view: 56° Frame rate: 8.7 Hz Thermal sensitivity: 50 mK (0.050 °C) Scene dynamic range: -10 °C to 400 °C (low gain), -10 °C to 140 °C (high gain) Spectral range: 8 - 14 µm Operating voltage: 5 V @ 500 mA Power consumption: 150 mW (operation), 650 mW (shutter), 5 mW (standby) Microcontroller: ESP32-PICO-D4, 240 MHz dual-core, 600 DMIPS, 520 KB SRAM, Wi-Fi Flash memory: 4 MB Display: 1.14" IPS LCD, 135 x 240 pixels, ST7789 Housing material: Nylon (3D print) Battery capacity: 300 mAh @ 3.7 V MEMS: MPU6886 (6-axis IMU) Microphone: SPM1423 PDM Power Management: AXP192 USB port: USB-C Extension: HY2.0-4P (GND, 5V, GPIO32, GPIO33) Product size: 48 x 30 x 29 mm Packaging size: 144 x 44 x 43 mm Net weight: 26 g Gross weight: 82 g Other data Power supply: Press and hold reset button for 2 seconds (on), 6 seconds (off) Mode switching: Button A (colour mode), Button B (measurement tracking) Display contents: Temperature image, battery indicator, histogram, temperature range Automatic target tracking and temperature range adjustment Scope of delivery 1 x M5StickT2 thermal imaging camera 1 x USB-C cable (20 cm)

CircuitMess Spencer: DIY voice assistant This DIY voice assistant understands simple voice commands, connects to the Internet, shows data and animations on an LED display and has a humorous personality, for ages 11 and up. Features at a glance Understands simple voice commands and connects to the internet 144-pixel LED display shows data, customised icons, animations and scrolling text. Can check weather forecasts, tell jokes, sing songs and set a stopwatch. Allows display of custom animations and understands humorous pop culture references. Users can programme new functions that are triggered by certain phrases and words. Technical specifications Age: from 11 yearsDimensions: 29.1 x 19.2 x 3.9 cm 144-pixel LED grid for display Internet connectivity Integrated microphone for voice recognition Other data DIY kit requires assembly Humorous personality with ability to find new jokes online Scope of delivery 1x CircuitMess Spencer DIY kit