Pololu wheels 80×10mm, 2 pieces. Black

Name: Pololu wheels 80×10mm, 2 pieces. Black
Brand: Pololu
SKU: POL1430
Price: 6.6 EUR
Availability: SoldOut

Produktnummer: POL1430

€6.60

Jetzt Bestellen und
4 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

Artikel aktuell nicht lieferbar

Menge prüfen

Benachrichtige mich, sobald der Artikel lieferbar ist.

Datenschutz

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen und die AGB gelesen und bin mit ihnen einverstanden. *

99% positive Bewertung

Kostenloser Versand ab 79€*

Support

Wird oft zusammengekauft

Produktinformationen "Pololu wheels 80×10mm, 2 pieces. Black"

These black plastic wheels have silicone tyres and measure 80 mm (3.15") in diameter. They fit the 3mm D-shafts of many of our motors, including our micro metal gearmotors and our mini plastic gearmotors. Additionally, this wheel is compatible with several of our universal mounting hubs, which can serve as adapters for motors with different shafts. This product contains 2 wheels.

Technical data:

Size: 80 x 10 mm
Weight: 0.7 oz
Shaft diameter: 3 mm
Colour: Black

Further information as well as data sheets, instructions and downloads can be found at:
https://www.pololu.com/product/1430

Zolltarifnummer:	39269097
Brand:	Pololu
Country of Origin:	China
EAN:	4060137018817
Gross Weight (kg):	0.043
Manufacturer ID:	1430
Product ID:	POL1430

Manufacturer information
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com

WEEE number: 17968585

Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions

Read the operating instructions in full before use.
Disconnect the power supply before maintenance or installation.
Only use components within the intended voltage or power range.
Protect components from moisture, extreme temperatures and dust.
Not suitable for use in safety-critical applications.
Dispose of defective components properly; dispose of electronic components as electronic waste.
Protect small parts and cables from children and unauthorised persons.
Handle sharp edges and moving parts with care, risk of injury.
Avoid static discharge during installation by earthing.
Dispose of in accordance with the applicable local regulations.

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Kunden kauften auch

Perforated grid board, double-sided, 3x7cm, 10 pieces

These breadboards are ideal for designing your own circuits. As the solder contacts are accessible on the front and back, components can be soldered on both sides. The tin-coated and plated-through contacts make soldering easier and the contacts do not come loose from the board under normal soldering conditions.Technical data:double-sided, tin-plated copper overlayCoordinate labelling on both sidesSolder strips on 2 sidesPitch: 2.54 mmDiameter per hole: approx. 1 mmThickness approx. 1.6 mm4 mounting holesDimensions: 3x7 cm240 contactsScope of delivery:10x breadboard

€3.30

Sofort verfügbar · 100+ Stück · 1-3 days

Perforated grid board, double-sided, 3x7cm, 10 pieces

PBS-DS-37

€3.30

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Perforated grid board, double-sided, 5x7cm, 10 pieces

€4.20

Sofort verfügbar · 100+ Stück · 1-3 days

Perforated grid board, double-sided, 5x7cm, 10 pieces

PBS-DS-57

€4.20

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

SparkFun motor driver, dual TB6612FNG, with headers

The TB6612FNG motor driver can control up to two DC motors with a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: clockwise rotation, anti-clockwise rotation, short-time braking and stop. The two motor outputs (A and B) can be controlled separately and the speed of each motor is controlled by a PWM input signal with a frequency of up to 100kHz. The STBY pin should be pulled high to bring the motor out of standby mode. Due to popular demand, this version of the SparkFun motor driver includes pre-soldered pin headers to make it easier to use. With the headers already soldered on, you can use this small board immediately without any assembly! The logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is designed for up to 1.2A per channel (or up to 3.2A for a short single pulse). The circuit board is supplied with all components as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are divided between two pin headers in a 0.1" grid; the pins are arranged so that the input pins are on one side and the output pins on the other. Features: Supply voltage: VM=15V max, VCC=2.7--5.5V Output current: Iout=1.2A (average) / 3.2A (peak) Standby control for power saving CW/CCW/short brake/stop motor control modes Built-in thermal shutdown circuit and undervoltage detection circuitry All TB6612FNG pins broken out to 0.1" spacing Filter capacitors on both supply lines Pre-soldered pin headers Documents: Get Started With the Motor Driver Hookup Guide Circuit diagram Eagle files Hookup Guide Datasheet (TB6612FNG) GitHub (v1.1c)

€17.10

Sofort verfügbar · 3 Stück · 1-3 days

SparkFun motor driver, dual TB6612FNG, with headers

ROB-14450

€17.10

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

T-Cobbler for Raspberry Pi incl. GPIO cable

With this GPIO T-Cobbler it is possible to build circuits for the Raspberry Pi on a breadboard / breadboard in no time at all. Our T-Cobbler is supplied fully assembled - no soldering required! Scope of delivery - T-Cobbler for Raspberry Pi - GPIO connection cable suitable for: All Raspberry Pi models with 40 pin GPIO interface

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

T-Cobbler for Raspberry Pi incl. GPIO cable

BT-Cobbler

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Prototyping HAT for Raspberry Pi

With this prototyping board for Raspberry Pi, breadboard assemblies can be permanently transferred to a circuit board.Technical data40 pin GPIO supportStrip for tapping the GPIO ports (labelled with assignment)Headers for tapping GND, 5V, 3.3V2.54mm pitchSocket for 8-pin ICHAT compatible sizeDimensions: 66 x 57mmContentsPrototyping Board2x20 pin female headerScrews / mounting kit

€4.50

Sofort verfügbar · 100+ Stück · 1-3 days

Prototyping HAT for Raspberry Pi

RPI-PTHAT

€4.50

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

120-piece brass spacer assortment in plastic box, size: M3.0

120-piece brass spacer assortment M3.0 in plastic box The 120-piece brass spacer assortment M3.0 offers a robust and versatile solution for fastening and mounting electronic components such as Arduino boards. Whether in prototype development or repair, the different lengths of the spacers allow flexible customisation of different projects. This extensive range made of brass and stainless steel in a practical plastic box is not only efficient, but also ensures that all parts are always to hand and can be carefully sorted. Features at a glance Versatile for connecting expansion boards such as Arduino & Co. 120-piece set offers an extensive selection for various applications Material: brass and stainless steel ensures long service life Technical specifications Size: M3.0 metric Spanner size: 5mm Material: Brass, stainless steel Scope of delivery 120-piece assortment in plastic box 10x M3.0 spacers 6mm female - female 10x M3.0 spacers 10mm female - female 10x M3.0 spacers 12mm female - female 10x M3.0 spacer 15mm Female - Female 10x M3.0 spacer 6mm+6mm Male - Female 10x M3.0 spacer 10mm+6mm Male - Female 10x M3.0 spacer 15mm+6mm Male - Female 10x M3.0 spacer 20mm+6mm Male - Female 20x M3.0 screw 8mm 20x M3.0 nut Please note Note: Not suitable for Raspberry Pi! Here we recommend the use of size M2.5; article DBSET-M2.5

€12.90

Sofort verfügbar · 92 Stück · 1-3 days

Neu

120-piece brass spacer assortment in plastic box, size: M3.0

DBSET-M3.0

€12.90

Sofort verfügbar · 92 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

4x8 RGB LED Matrix pHAT for Raspberry Pi

Overview This LED matrix pHAT is simply plugged into the GPIO connection of the Raspberry Pi. The 32 RGB LEDs can then be controlled with just one signal pin Thanks to its small size, this pHAT is perfect for the Raspberry Pi Zero / Zero W. However, the board can also be used with other Raspberry Pi models (from Gen. B+). Features Compatible with all Raspberry Pi models (from Gen. B+) 4x8 RGB LEDs of type WS2812B Control pin can be configured via jumper Development resources for an easy start are available in the manufacturer's wiki (examples in Python and a web controller) Specifications Operating voltage: 5V Brightness: Adjustable in 256 steps Colour depth: 24-bit true colour (8-bit for R/G/B respectively, total 256x256x256=16777216 colours) Data rate: 800Kbps(typ) Dimensions: 65 × 30.2mm Board hole diameter: 3.0mm Scope of delivery RGB pHat 2x spacers with screws Further information can be found in the manufacturer's wiki at : http://www.waveshare.com/wiki/RGB_LED_HAT

€9.90

Sofort verfügbar · 19 Stück · 1-3 days

Neu

4x8 RGB LED Matrix pHAT for Raspberry Pi

RPI-LEDPHAT

€9.90

Sofort verfügbar · 19 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

NeoPixel ring with 24 WS2812 5050 RGB LEDs

This small, intelligent RGB LED ring with 24 WS2812 LEDs can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data: Operating voltage: 4 - 7 V LED dimensions: 5 x 5 x 1.50 mm Outer diameter: approx. 86 mm Diameter inside: approx. 72 mm Height: 3.15 mm Note: The components shown are for presentation purposes only and are not included in the scope of delivery! You are only purchasing the NeoPixel ring.

€6.90

Sofort verfügbar · 25 Stück · 1-3 days

NeoPixel ring with 24 WS2812 5050 RGB LEDs

NEOPR24

€6.90

Sofort verfügbar · 25 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

120-piece brass spacer assortment in plastic box, size: M2.5

120-piece brass spacer range This 120-piece brass spacer range is perfect for providing a reliable and robust connection between expansion boards and common microcontrollers such as the Raspberry Pi and Arduino. It is characterised by a selection of brass and stainless steel spacers that guarantee long-term stability and corrosion resistance. With different lengths and shapes, this set allows for flexible mounting and customisation to suit different project requirements. The included plastic box ensures neat storage and easy transport, making this range an essential item for any electronics workshop. Features at a glance Versatility: Perfect for use with Raspberry Pi, Arduino and similar devices. Material quality: Made from robust brass and stainless steel. Practical packaging: All parts are neatly organised in a plastic box. Technical data Size: M2.5 metric Spanner size: 5mm Material: Brass, stainless steel Scope of delivery 120-piece assortment in plastic box 10x M2.5 spacers 6mm female - female 10x M2.5 spacers 10mm female - female 10x M2.5 spacers 12mm female - female 10x M2.5 spacer 15mm Female - Female 10x M2.5 spacer 6mm+6mm Male-Female 10x M2.5 spacer 10mm+6mm Male-Female 10x M2.5 spacer 15mm+6mm Male-Female 10x M2.5 spacer 20mm+6mm male-female 20x M2.5 screw 8mm 20x M2.5 nut

€12.90

Sofort verfügbar · 100+ Stück · 1-3 days

120-piece brass spacer assortment in plastic box, size: M2.5

DBSET-M2.5

€12.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Prototyping shield for Arduino Uno incl. breadboard

Prototyping shield for Arduino Uno with integrated breadboard - Ideal for development projects This prototyping shield for Arduino Uno is equipped with an integrated breadboard and enables quick and easy prototyping. It comes fully assembled and offers reset and switch buttons as well as LEDs for status display. The shield is particularly flexible to use thanks to the forwarding of 5V, GND and other pins. Features at a glance Integrated breadboard: With 170 contacts for versatile plug connections and experiments. User-friendly operation: Equipped with reset and switch button for easy handling during prototyping. Visual indicators: Two LEDs for displaying operating status or other important signal information. Technical data Breadboard with 170 integrated contacts Reset button and switch button 2 LEDs for status displays 5V, GND and other important pins are accessible and routed Other data The shield is supplied fully assembled, no additional assembly required. Scope of delivery 1 x prototyping shield for Arduino Uno incl. breadboard, fully assembled Links To the BerryBase blog

€5.10

Sofort verfügbar · 14 Stück · 1-3 days

Prototyping shield for Arduino Uno incl. breadboard

AUNO-PTSH

€5.10

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

610-piece Dupont crimp connector set in plastic box

610-piece Dupont crimp connector set in plastic box The 610-piece Dupont crimp connector set is ideal for DIY enthusiasts and professionals in the electronics sector. It offers an extensive selection of high-quality crimp contacts and connector housings that ensure a reliable and long-lasting connection. The set contains male and female contacts that are compatible with AWG 22-28 cables and are characterised by their ease of use. In addition, the supplied plastic box with compartments makes it easy to organise and store the parts. Features at a glance Various Dupont housings in sizes from 1x1 pin to 2x6 pin Comprehensive set with 610 parts Brass contacts with tin-plated coating Compatible with AWG 22-28 cables Technical specifications Pitch: 2.54mm Crimp contacts suitable for cable AWG: 22-28 Contact material: brass Contact coating: tin-plated Scope of delivery 610-piece Dupont crimp connector set in plastic box: 50x Dupont housing 1x1 pin 40x Dupont housing 1x2 pin 20x Dupont housing 1x3 pin 20x Dupont housing 1x4 pin 20x Dupont housing 1x5 pin 20x Dupont housing 1x6 pin 10x Dupont housing 2x2 pin 10x Dupont housing 2x3 pin 10x Dupont housing 2x4 pin 10x Dupont housing 2x5 pin 10x Dupont housing 2x6 pin 200x Dupont crimp contact female 200x Dupont crimp contact male

€9.90

Sofort verfügbar · 32 Stück · 1-3 days

610-piece Dupont crimp connector set in plastic box

DUPST-SET

€9.90

Sofort verfügbar · 32 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Micro Metal Gearmotor bracket, plastic, easy installation for 49x12 wheels

DFRobot Micro Metal Gearmotor Extended Bracket (pair) This compact bracket allows for convenient mounting of popular micro metal gear motors. The plastic bracket encloses the otherwise exposed gears and the mounting lugs hold the nuts in place for easy installation. This version has mounting lugs that allow use with 49x12 gears. Features at a glance Compact bracket: Allows easy mounting of micro metal gearmotors. Plastic housing: Protects the exposed gears. Compatible with 49x12 wheels: Enables versatile application possibilities. Technical specifications Material: Plastic Compatibility: Micro metal geared motors, 49x12 wheels Scope of delivery 2x micro motor mounts 4x fixing screws Project Self-balancing robot

€4.25

Sofort verfügbar · 13 Stück · 1-3 days

DFRobot Micro Metal Gearmotor bracket, plastic, easy installation for 49x12 wheels

FIT0160

€4.25

Sofort verfügbar · 13 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Mehr von Pololu

Pololu DRV8434S Stepper Motor Driver, SPI, 2A Max. Current, microstepping up to 1/256, 4.5V-48V

€12.90

Artikel aktuell nicht lieferbar

Details

Pololu DRV8434S Stepper Motor Driver, SPI, 2A Max. Current, microstepping up to 1/256, 4.5V-48V

Pololu DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit This breakout board driver for the DRV8434S microstepping bipolar stepper motor from TI works with operating voltages from 4.5 V to 48 V and can deliver up to 1.2 A continuously per phase without heat sink or airflow (2 A peak value). The SPI interface allows configuration of current limit, step mode (11 step modes from full step to 1/256 step), decay mode and stall detection. The driver also has built-in protection against undervoltage, overcurrent and overtemperature. This version has the maximum current limit set to 2 A, and SPI can be used to set the actual current limit to one of 16 evenly spaced values from 125 mA to 2 A (i.e. in 125 mA steps). Features at a glance Supports operating voltages from 4.5 V to 48 V. Continuous current per phase: 1.2 A, peak value: 2 A. SPI interface for configuration of current limit and step modes. Integrated protection against undervoltage, overcurrent and overtemperature. Microstep resolutions from full step to 1/256 step possible. Technical Data Size: 1.5 cm × 2.0 cm Weight: 1.3 g (Without the optional headers supplied.) Minimum operating voltage: 4.5 V (Inputs below 6 V reduce the maximum current limit that can be set. At 4.5 V, the maximum adjustable limit is 1.75 A.) Maximum operating voltage: 48 V (Not intended for use with 48 V batteries, which can be well above the nominal value when fully charged) Continuous current per phase: 1.2 A (Without heat sink or forced air flow.) Maximum current per phase: 2 A (With sufficient additional cooling.) Minimum logic voltage: 1.8 V (The logic high threshold varies for two states, three states and four states. See data sheet for details) Maximum logic voltage: 5.5 V (The absolute maximum voltage at each input is 5.75 V.) Microstep resolutions: Full step with 100% current, full step with 70% current, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 Current limit control: Fixed maximum of 2 A with SPI scaling Reverse voltage protection: No Soldered header pins: No PCB development codes: Md43b Other PCB markings: 0J13692 Other data This product is not suitable for use with 48V batteries. Scope of delivery 1x Pololu DRV8434S SPI Stepper Motor Driver Carrier

POL3768

€12.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Brushed DC motor: size 130, 6V, 11.5kRPM, 800mA blocking current

€1.80

Artikel aktuell nicht lieferbar

Details

Brushed DC motor: size 130, 6V, 11.5kRPM, 800mA blocking current

Brushed DC motor: size 130, 6V, 11.5k RPM This size 130 brushed DC motor has a recommended operating voltage of 3- 12 V and is used in the larger Pololu plastic geared motors. Approximate specifications at 6 V: freewheeling speed of 11,500 RPM, freewheeling current of 70 mA and stall current of 800 mA. The 130-size DC motor is ideal for Pololu plastic geared motors and works with an operating voltage of 3 to 12 V. At 6 V, the motor reaches an idle speed of 11,500 rpm and offers impressive torque, making it efficient and versatile. It is quieter and more power efficient than the FA-130 motor and can easily be used in Tamiya gearboxes as well as Solarbotics GM gearboxes, making it an optimal choice for energy-efficient applications. Features at a glance High speed: Freewheel speed of 11,500 RPM at 6V. Low power consumption: Freewheeling current of only 70 mA at 6V. Versatile voltage requirements: Operating voltage from 3-12 V. Technical data Size: 25 × 15 × 20 mm Weight: 18 g Shaft diameter: 2 mm No-load speed @ 6V: 11500 rpm No-load current at 6V: 70 mA Current at standstill at 6V: 800 mA Scope of delivery 1x brushed DC motor

POL1117

€1.80

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

PCX 120:1 mini plastic geared motor HP, offset 3mm D-shaft output, extended motor shaft

€6.70

Artikel aktuell nicht lieferbar

Details

PCX 120:1 mini plastic geared motor HP, offset 3mm D-shaft output, extended motor shaft

This compact, low-cost plastic geared motor(high-performance DC motor with brushed reduction gearbox 120:1) is well suited for use in small robots. Although it is designed for operation at 4.5 V, it should also run smoothly in the 3 V to 6 V range. The gearbox has a D-shaped output shaft with a length of 9.7 mm and a diameter of 3 mm, which is offset but parallel to the motor shaft, and a built-in safety clutch protects the gearbox from excessive loads. This version also has a 5×1.5 mm extended motor shaft. Important specifications: Voltage No-load power Stall extrapolation 4.5 V 150 rpm, 130 mA 1.8 kgcm, 1.25 A Technical specifications: Size: 36.5 x 20 x 27.4 mm Weight: 19 g Shaft diameter: 3 mm Shaft type: Offset 3mm D Typical operating voltage: 4.5 V Gear ratio: 120:1 No-load speed at 4.5 V: 150 rpm No-load current at 4.5 V: 130 mA Standstill current at 4.5 V: 1250 mA Standstill torque at 4.5 V: 25 oz-in Extended motor shaft? Yes Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/1520

POL1520

€6.70

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 100:1 HP 6V micro-metal geared motor with extended motor shaft

€18.30

Sofort verfügbar · 6 Stück · 1-3 days

Pololu 100:1 HP 6V micro-metal geared motor with extended motor shaft

This geared motor is a miniature DC motor with 6 V and a metal gearbox with a ratio of 100.37:1. It has a cross-section of 10 × 12 mm and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. This version also has a 4.5 × 1 mm extended motor shaft. Specifications: Voltage 6 V No-load power 310 rpm, 70 mA Stall extrapolation 1.7 kg/cm, 1.6 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 100.37:1 No-load speed @ 6V: 310 rpm No-load current @ 6V: 0.07 A Stall current @ 6V: 1.6 A Stall torque @ 6V: 1.7 kg-cm Max output power @ 6V: 1.3 W Extended motor shaft?: Yes Motor type: 1.6A stall @ 6V (HP 6V) Max efficiency @ 6V: 37 % Speed at max efficiency: 250 rpm Torque at max efficiency: 0.29 kg-cm Current at max efficiency: 0.33 A Output power at max efficiency: 0.73 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2214

POL2214

€18.30

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu 1000:1 micro metal geared motor HP 6V

€26.60

Artikel aktuell nicht lieferbar

Details

Pololu 1000:1 micro metal geared motor HP 6V

This geared motor is a miniature high-power6 V DC motor with a 986.41:1 metal gearhead, making it a good choice for applications requiring fine control at very low speeds. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. (Note: stall torque and current figures are theoretical; stalling the motor will damage the gearbox). Important specifications: Voltage No-load power Stall torque extrapolation 6 V 31 rpm, 70 mA 12 kgcm, 1.6 A Technical specifications: Size: 10 × 12 × 29.5 mm Weight: 10.5 g Shaft diameter: 3 mm Gear ratio: 986.41:1 No-load speed at 6 V: 31 rpm No-load current at 6 V: 0.07 A Standstill current at 6 V: 1.6 A Standstill torque @ 6 V: 12 kg-cm Extended motor shaft? No Motor type: 1.6A stall @ 6V (HP 6V) Max. Efficiency @ 6V: 28 % Speed at max. efficiency: 26 rpm Torque at max. efficiency: 2.0 kg-cm Current at maximum efficiency: 0.32 A Output power at maximum efficiency: 0.53 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/1595

POL1595

€26.60

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 156:1 Metal geared motor 20Dx44L mm 6V

€27.20

Artikel aktuell nicht lieferbar

Details

Pololu 156:1 Metal geared motor 20Dx44L mm 6V

These small brushed DC geared motors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 156.3:1 metal helical gearbox. The geared motor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft has a diameter of 4 mm and protrudes 18 mm from the face plate of the gearbox. Characteristics at 6 V: 93 RPM and 170 mA without load, 110 oz-in (7.9 kg-cm) and 2.9 A at standstill. Note: The torque limit of the gearbox is 70 oz-in (5 kg-cm); see detailed description for important product limitations. Technical data: Size: 20D × 44L mm Weight: 45 g Shaft diameter: 4 mm Gear ratio: 156.25:1 No-load speed @ 6V: 93 rpm No-load current at 6 V: 170 mA Standstill current at 6 V: 2.9 A Standstill torque at 6 V: 110 oz-in Extended motor shaft? No Motor type: 2.9 A stall current at 6 V Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3456

POL3456

€27.20

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 298:1 Micro metal geared motor HP 6V

€18.70

Sofort verfügbar · 2 Stück · 1-3 days

Pololu 298:1 Micro metal geared motor HP 6V

This geared motor is a miniature high-performance DC motorwith 6 V and a 297.92:1 metal gearbox. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Important specifications: Voltage No-load power Stall extrapolation 6 V 100 rpm, 70 mA 4.0 kgcm, 1.6 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 297.92:1 No-load speed at 6 V: 100 rpm No-load current at 6 V: 0.07 A Standstill current at 6 V: 1.6 A Standstill torque @ 6 V: 4.0 kg-cm Max. Output power @ 6V: 1.1 W Extended motor shaft? No Motor type: 1.6A stall @ 6V (HP 6V) Max. Efficiency @ 6V: 31 % Speed at max. efficiency: 87 rpm Torque at max. efficiency: 0.65 kg-cm Current at maximum efficiency: 0.31 A Output power at maximum efficiency: 0.58 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/994

POL994

€18.70

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu 298:1 Micro metal geared motor LP 6V

€18.80

Sofort verfügbar · 5 Stück · 1-3 days

Pololu 298:1 Micro metal geared motor LP 6V

This geared motor is a miniature low-power, 6 V brushed DC motor with a 297.92:1 metal gearhead. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Important specifications: Voltage No-load power Stall extrapolation 6 V 45 rpm, 20 mA 2.0 kgcm, 0.36 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 297.92:1 No-load speed @ 6 V: 45 rpm No-load current at 6 V: 0.02 A Standstill current @ 6 V: 0.36 A Standstill torque @ 6V: 2.0 kg-cm Max. Output power @ 6V: 0.22 W Extended motor shaft? No Motor type: 0.36A stall @ 6V (LP 6V) Max. Efficiency at 6V: 27 % Speed at max. efficiency: 34 rpm Torque at max. efficiency: 0.44 kg-cm Current at maximum efficiency: 0.09 A Output power at maximum efficiency: 0.15 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/1094

POL1094

€18.80

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu 3-pin female JST ZH-style cable for Sharp GP2Y0A51 distance sensors, 30cm

€1.50

Artikel aktuell nicht lieferbar

Details

Pololu 3-pin female JST ZH-style cable for Sharp GP2Y0A51 distance sensors, 30cm

This 30 cm (12 inch) cable has 28 AWG wires and a 3-pin JST ZH female connector that mates with the 3-pin male connector of Sharp's GP2Y0A51 analogue distance sensor. The other ends of the wires are not terminated; they can be cut to the appropriate length for your application. The colour scheme of the wires corresponds to the pin assignment of the Sharp distance sensor: red for current, black for ground and white for the signal. Technical data: Pins: 1 x 3 Spacing: 1.5 mm Length: 30 cm Gender: Female-undermined Wire gauge: 28 AWG Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2411

POL2411

€1.50

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 3.3V, 500mA step-down voltage regulator D24V5F3

€4.90

Sofort verfügbar · 41 Stück · 1-3 days

Pololu 3.3V, 500mA step-down voltage regulator D24V5F3

The compact (0.4" × 0.5") D24V5F3 synchronous step-down voltage regulator accepts an input voltage of up to 36 V and efficiently reduces it to 3.3 V while allowing a maximum output current of 500 mA. This regulator offers typical efficiencies between 80 and 90 % and has a very low dropout so that it can be used with input voltages of only a few hundred millivolts above 3.3 V. The pins are 0.1" apart, making this board compatible with standard solderless breadboards and perfboards. Technical data: Size: 0.4" × 0.5" × 0.1" Weight: 0.6 g Minimum operating voltage: 3.4 V Maximum operating voltage: 36 V Maximum output current: 500 mA Output voltage: 3.3 V Reverse voltage protection? No Maximum quiescent current: 0.2 mA PCB dev codes: Reg16a Other PCB markings: 0J7990, blank white housing Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2842

POL2842

€4.90

Sofort verfügbar · 41 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu 50:1 micro metal geared motor HP 6V with extended motor shaft

€19.40

Artikel aktuell nicht lieferbar

Details

Pololu 50:1 micro metal geared motor HP 6V with extended motor shaft

This geared motor is a miniature high-performance DC motorwith 6 V and a 51.45:1 metal gearbox. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Important specifications: Voltage 6 V No-load power 590 rpm, 70 mA Stall extrapolation 0.86 kgcm, 1.6 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 51.45:1 No-load speed at 6 V: 590 rpm No-load current at 6 V: 0.07 A Stopping current at 6 V: 1.6 A Standstill torque @ 6V: 0.86 kg-cm Max. Output power @ 6V: 1.3 W Extended motor shaft? Yes Motor type: 1.6A stall @ 6V (HP 6V) Max. Efficiency @ 6V: 38 % Speed at max. efficiency: 490 rpm Torque at max. efficiency: 0.15 kg-cm Current at maximum efficiency: 0.32 A Output power at maximum efficiency: 0.75 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2213

POL2213

€19.40

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 50:1 micro metal geared motor HPCB 6V with extended motor shaft

€20.90

Sofort verfügbar · 4 Stück · 1-3 days

Pololu 50:1 micro metal geared motor HPCB 6V with extended motor shaft

This geared motor is a miniature high-performance DC motorwith 6 V and long-life carbon brushes as well as a 51.45:1 metal gearbox. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. This version also has a 4.5 × 1 mm extended motor shaft. Important specifications: Voltage No-load power Stall extrapolation 6 V 650 rpm, 100 mA 0.74 kg?cm (10 oz?in), 1.5 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 51.45:1 No-load speed at 6 V: 650 rpm No-load current at 6 V: 0.10 A Stopping current at 6 V: 1.5 A Standstill torque @ 6V: 0.74 kg-cm Max. Output power @ 6V: 1.2 W Extended motor shaft? Yes Long-life carbon brushes? Yes Motor type: 1.5A stall @ 6V (HPCB 6V - carbon brush) Max. Efficiency at 6V: 32 % Speed at max. efficiency: 490 rpm Torque at max. efficiency: 0.16 kg-cm Current at maximum efficiency: 0.42 A Output power at maximum efficiency: 0.80 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3073

POL3073

€20.90

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu 5V Step-Up/Step-Down voltage regulator S13V30F5

€10.90

Artikel aktuell nicht lieferbar

Details

Pololu 5V Step-Up/Step-Down voltage regulator S13V30F5

This powerful synchronised step-up/step-down regulator efficiently generates 5 V from input voltages between 2.8 V and 22 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the supply voltage can fluctuate widely, such as batteries that start above 5 V but discharge below 5 V. The board measures 0.9" × 0.9", has a typical efficiency of 85% to 95% and can deliver typical continuous output currents between 2 A and 4 A, depending on the input voltage. The regulator also features reverse polarity protection and an optional enable input that allows the regulator to be set to a low-power state with a current consumption of less than 10 µA per volt at VIN. Technical data: Size: 0.9" × 0.9" × 0.38" Weight: 3.5 g Minimum operating voltage: 2.8 V Maximum operating voltage: 22 V Continuous output current: 3 A Output voltage: 5 V Reverse polarity protection? Yes Maximum quiescent current: 100 mA Output type: Fixed 5V PCB dev codes: Reg26a Other PCB codes: 0J12777 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/4082

POL4082

€10.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 5V, 1A step-down voltage regulator D24V10F5

€8.30

Artikel aktuell nicht lieferbar

Details

Pololu 5V, 1A step-down voltage regulator D24V10F5

The compact (0.5 × 0.7") D24V10F5 synchronous step-down voltage regulator accepts an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 90% and has a very low dropout, so it can be used with input voltages up to a few hundred millivolts above 5V. The pins are 0.1" apart, making this board compatible with standard solderless breadboards and perfboards. Technical data: Size: 0.5" × 0.7" × 0.14" Weight: 1.0 g Minimum operating voltage: 5.1 V Maximum operating voltage: 36 V Maximum output current: 1 A Output voltage: 5 V Reverse polarity protection? No Maximum quiescent current: 0.2 mA PCB dev codes: Reg17a Other PCB codes: 0J8557, blank white housing Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2831

POL2831

€8.30

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu 75:1 micro metal geared motor HP 6V with extended motor shaft

€19.80

Sofort verfügbar · 2 Stück · 1-3 days

Pololu 75:1 micro metal geared motor HP 6V with extended motor shaft

This geared motor is a miniature high-performance DC motorwith 6 V and a 75.81:1 metal gearbox. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. This version also has a 4.5 × 1 mm extended motor shaft. Important specifications: Voltage 6 V No-load power 410 rpm, 70 mA Stall extrapolation 1.3 kgcm, 1.6 A Technical specifications: Size: 10 × 12 × 26 mm Weight: 9.5 g Shaft diameter: 3 mm Gear ratio: 75.81:1 No-load speed @ 6 V: 410 rpm No-load current at 6 V: 0.07 A Standstill current at 6 V: 1.6 A Stopping torque at 6 V: 1.3 kg-cm Max. Output power @ 6V: 1.4 W Extended motor shaft? Yes Motor type: 1.6A stall @ 6V (HP 6V) Max. Efficiency @ 6V: 40 Speed at max. efficiency: 340 rpm Torque at max. efficiency: 0.23 kg-cm Current at maximum efficiency: 0.34 A Output power at maximum efficiency: 0.80 W Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2215

POL2215

€19.80

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu A-Star 32U4 robot controller LV with Raspberry Pi Bridge

€21.90

Sofort verfügbar · 9 Stück · 1-3 days

Pololu A-Star 32U4 robot controller LV with Raspberry Pi Bridge

This programmable module is used in combination with a Raspberry Pi as a control centre for a small robot or electronics project. The ATmega32U4 AVR microcontroller is pre-installed with an Arduino-compatible bootloader, and the board includes two motor drivers that can supply 1.8 A per channel to two brushed DC motors. An efficient voltage regulator(2.7 V to 11 V input) and level converter enable power supply and communication with a Raspberry Pi. This version (item #3117) is equipped with selected plated-through connectors and components for use as a Raspberry Pi add-on. Technical data: Size: 65 mm × 56 mm Weight: 23 g Processor: ATmega32U4 @ 16 MHz RAM size: 2560 bytes Programme memory size: 32 Kbytes Motor driver: DRV8838 Motor channels: 2 User I/O lines: 26 Input voltage range: 2.7 V to 11 V Minimum operating voltage: 2.7 V Maximum operating voltage: 11 V Maximum output current: 1.5 A Continuous output current per channel: 1.8 A Peak output current per channel: 1.8 A Logical voltage: 5 V Reverse polarity protection? Yes External programming device required? No PCB dev codes: Ac04b Other PCB codes: 0J8907 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3117

POL3117

€21.90

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu A-Star 32U4 robot controller SV with Raspberry Pi Bridge

€27.80

Sofort verfügbar · 3 Stück · 1-3 days

Pololu A-Star 32U4 robot controller SV with Raspberry Pi Bridge

This programmable module is used in combination with a Raspberry Pi as a control centre for a small robot or electronics project. The ATmega32U4 AVR microcontroller is pre-installed with an Arduino-compatible bootloader, and the board includes two motor drivers that can supply 1.7 A per channel to two brushed DC motors. An efficient voltage regulator(5.5 V to 36 V input) and level converter enable power supply and communication with a Raspberry Pi. This version (article #3119) is equipped with selected plated-through connectors and components for use as a Raspberry Pi add-on. Technical data: Size: 65 mm × 56 mm Weight: 23 g Processor: ATmega32U4 @ 16 MHz RAM size: 2560 bytes Programme memory size: 32 Kbytes Motor driver: MAX14870 Motor channels: 2 User I/O lines: 26 Input voltage range: 5.5 V to 36 V Minimum operating voltage: 5.5 V Maximum operating voltage: 36 V Maximum output current: 2.5 A Continuous output current per channel: 1.7 A Peak output current per channel: 2.5 A Logical voltage: 5 V Reverse polarity protection? Yes External programming device required? No PCB dev codes: Ac04c Other PCB codes: 0J9476 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3119

POL3119

€27.80

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu A-Star 32U4 robot controller with Raspberry Pi Bridge (SMT components only)

€17.40

Sofort verfügbar · 6 Stück · 1-3 days

Pololu A-Star 32U4 robot controller with Raspberry Pi Bridge (SMT components only)

This programmable module is designed as the centrepiece of a small robot, either as an additional controller on a Raspberry Pi base or as a complete control solution on its own. The ATmega32U4 AVR microcontroller is pre-installed with an Arduino-compatible bootloader. The on-board hardware includes two motor drivers capable of delivering 1.8 A per channel and an efficient voltage regulator that allows the controller to operate with a 2.7 V to 11 V input voltage, along with level shifters that allow it to interface with a Raspberry Pi. This version (item #3116) contains no through-hole components or connectors, allowing custom assembly or standalone use. Technical specifications: Size: 65 mm × 56 mm Weight: 14 g Processor: ATmega32U4 @ 16 MHz RAM size: 2560 bytes Programme memory size: 32 Kbytes Motor driver: DRV8838 Motor channels: 2 User I/O lines: 26 Input voltage range: 2.7 V to 11 V Minimum operating voltage: 2.7 V Maximum operating voltage: 11 V Maximum output current: 1.5 A Continuous output current per channel: 1.8 A Peak output current per channel: 1.8 A Logical voltage: 5 V Reverse polarity protection? Yes External programming device required? No PCB dev codes: Ac04b Other PCB codes: 0J8907 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3116

POL3116

€17.40

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu A4988 stepper motor driver, Black Edition

€6.80

Artikel aktuell nicht lieferbar

Details

Pololu A4988 stepper motor driver, Black Edition

Our Black Edition A4988 stepper motor driver carrier is a higher performance drop-in replacement for the original A4988 stepper motor carrier. It features a four-layer PCB for better thermal behaviour, allowing the A4988 bipolar microstepping stepper motor driver to deliver around 20% more current than our two-layer (green) version. Like our original carrier, the Black Edition offers adjustable current limiting, overcurrent and overtemperature protection and five different microstep resolutions. It operates from 8 V to 35 V and can supply up to 2 A per coil with sufficient additional cooling. The circuit board is supplied with 0.1" connector pins that are not soldered in. Technical data: Size: 0.6" × 0.8" Weight: 1.5 g Minimum operating voltage: 8 V Maximum operating voltage: 35 V Continuous current per phase: 1.2 A Maximum current per phase: 2 A Minimum logic voltage: 3 V Maximum logic voltage: 5.5 V Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16 Reverse voltage protection? No Packed housing? No Header pins soldered in? PCB dev codes: Md09c Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2128

POL2128

€6.80

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu analogue distance sensor 10-150cm, 3V

€33.90

Sofort verfügbar · 3 Stück · 1-3 days

Pololu analogue distance sensor 10-150cm, 3V

The GP2Y0A60SZ distance sensor from Sharp offers a large detection range of 4" to 60" (10 cm to 150 cm) and a high update rate of 60 Hz. Distance is indicated by an analogue voltage, so only a single analogue input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 3V mode. Technical data: Size: 1.3" × 0.41" × 0.4" Weight: 2.4 g Maximum range: 150 cm Minimum range: 10 cm Sampling rate: 60 Hz Minimum operating voltage: 2.7 V Maximum operating voltage: 3.6 V Supply current: 33 mA Output type: Analogue voltage Output voltage differential: 1.6 V Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2476

POL2476

€33.90

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu analogue distance sensor 10-150cm, 5V

€33.90

Sofort verfügbar · 5 Stück · 1-3 days

Pololu analogue distance sensor 10-150cm, 5V

The GP2Y0A60SZ distance sensor from Sharp offers a large detection range of 4" to 60" (10 cm to 150 cm) and a high update rate of 60 Hz. Distance is indicated by an analogue voltage, so only a single analogue input is required to interface with the module. The sensor is installed on our compact carrier board that makes it easy to integrate this great sensor into your project and is configured for 5V mode. Specifications: Size: 1.3" × 0.41" × 0.4" Weight: 2.5 g Maximum range: 150 cm Minimum range: 10 cm Sampling rate: 60 Hz Minimum operating voltage: 2.7 V Maximum operating voltage: 5.5 V Supply current: 33 mA Output type: Analogue voltage Output voltage difference: 3 V Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2474

POL2474

€33.90

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Balboa 32U4 balancing robot kit (without motors and wheels)

€79.95

Sofort verfügbar · 1 Stück · 1-3 days

Pololu Balboa 32U4 balancing robot kit (without motors and wheels)

Build your own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor driver, quadrature encoder and a complete IMU. This board can also be connected to a Raspberry Pi to form the basis of a complete Raspberry Pi controlled balancing robot. Motors and wheels are not included: Choose your wheels and motors to personalise your robot. Technical specifications: Size: 118 × 112 × 80 mm Weight: 200 g Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/3575

POL3575

€79.95

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Ball Caster, 0.5 inch metal ball, ABS housing, height-adjustable for small robots

€2.50

Sofort verfügbar · 2 Stück · 1-3 days

Pololu Ball Caster, 0.5 inch metal ball, ABS housing, height-adjustable for small robots

Pololu ball caster with 1/2-inch metal ball This ball caster uses a metal ball with a diameter of 1/2 inch. The height of the assembled kit varies from 0.5 inch to 0.8 inch, depending on the combination of spacers used. Features at a glance Black ABS housing and a 1/2-inch metal ball Height adjustable from 0.53 inch to approx. 0.7 inch with the spacers Can be mounted with the supplied screws or your own screws Designed for small robots, not for loads over a few pounds Technical data Ball diameter: 0.5 inch (approx. 12.7 mm) Weight without spacers or screws: 9 g Ball material: Metal Height without spacer: 0.53 inch (approx. 13.5 mm) Distance between screw holes: 0.58 inch (approx. 14.7 mm) Scope of delivery 1x ball caster with 1/2-inch metal ball 2x spacers (0.125 and 0.0625 inch thick) 2x 0.4375 bolts and nuts

POL953

€2.50

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Ball Caster, 0.5 inch plastic ball, ABS housing, height-adjustable for small robots

€2.50

Sofort verfügbar · 23 Stück · 1-3 days

Pololu Ball Caster, 0.5 inch plastic ball, ABS housing, height-adjustable for small robots

Pololu ball caster with 1/2-inch plastic ball This lightweight ball caster uses a 1/2-inch plastic ball. The height of the assembled kit varies from 0.5 inches to 0.8 inches, depending on the combination of spacers provided. Features at a glance Black ABS housing and a 1/2-inch plastic ball Total height of ball caster: 0.53 inches, can be increased to approximately 0.7 inches Can be mounted with the supplied screws or your own screws Designed for small robots, not for loads over a few pounds Technical data Ball diameter: 0.5 inch (approx. 12.7 mm) Weight without spacers or screws: approx. 2 g Ball material: plastic Height adjustable from 0.5 inch to 0.8 inch Height without spacer: 0.53 inch (approx. 13.5 mm) Distance between screw holes: 0.58 inch (approx. 14.7 mm) Scope of delivery 1x ball caster with 1/2-inch plastic ball 2x spacers (0.0625 inch and 0.125 inch thick) 2x screws and nuts (0.4375 inch)

POL952

€2.50

Sofort verfügbar · 23 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Ball Caster, 0.75 inch metal ball, ABS housing, height-adjustable for small robots

€3.20

Sofort verfügbar · 25 Stück · 1-3 days

Pololu Ball Caster, 0.75 inch metal ball, ABS housing, height-adjustable for small robots

Pololu ball caster with 3/4-inch metal ball This ball caster uses a 3/4-inch metal ball. The height of the assembled kit varies from 0.8 inches to 1.1 inches, depending on the combination of spacers provided. Features at a glance Black ABS housing and a 3/4-inch metal ball Total height of the ball caster: 0.82 inch, can be increased to approx. 1 inch Can be mounted with the supplied screws or your own screws Designed for small robots, not for loads over a few pounds Technical data Ball diameter: 0.75 inch (approx. 19mm) Weight without spacers or screws: 30g Ball material: metal Height adjustable from 0.8 inch to 1.1 inch Distance between screw holes: 0.61 inch (approx. 15.5 mm) Height without spacer: 0.82 inch (approx. 21 mm) Scope of delivery 1x ball caster with 3/4-inch metal ball 2x spacers (0.125 and 0.0625 inch thick) 2x 0.4375 inch bolts and nuts

POL955

€3.20

Sofort verfügbar · 25 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Big MOSFET slide switch with reverse polarity protection

€4.70

Sofort verfügbar · 22 Stück · 1-3 days

Pololu Big MOSFET slide switch with reverse polarity protection

This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to about 8 A at 4.5 V to 40 V. The board has reverse polarity protection and also allows easy control of the MOSFET with an external switch or the digital output of a microcontroller. Technical data: Size: 0.8" × 0.9" × 0.16" Weight: 2.6 g Current carrying capacity: 8 A Minimum operating voltage: 4.5 V Maximum operating voltage: 40 V Reverse polarity protection? Yes PCB dev codes: Psw04b Other PCB codes: 0J9260 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2814

POL2814

€4.70

Sofort verfügbar · 22 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Big MOSFET slide switch with reverse polarity protection

€7.60

Artikel aktuell nicht lieferbar

Details

Pololu Big MOSFET slide switch with reverse polarity protection

This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to about 16 A at 4.5 V to 40 V. The board has reverse polarity protection and also allows easy control of the MOSFET with an external switch or the digital output of a microcontroller. Technical data: Size: 0.8" × 0.9" × 0.16" Weight: 2.6 g Current carrying capacity: 16 A Minimum operating voltage: 4.5 V Maximum operating voltage: 40 V Reverse polarity protection? Yes PCB dev codes: Psw04b Other PCB codes: 0J9260 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2815

POL2815

€7.60

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu Big Pushbutton Power Switch with reverse polarity protection, HP

€21.50

Sofort verfügbar · 9 Stück · 1-3 days

Pololu Big Pushbutton Power Switch with reverse polarity protection, HP

The Pololu Pushbutton Power Switches are ingenious power control alternatives to bulky mechanical switches. The main function is a pushbutton-based, latching power control, where one push of the button switches the power supply on and another push switches it off. Additional control inputs enable advanced applications such as automatic switch-off by the powered device. This HP version operates from 4.5 V to 40 V and can supply continuous currents of up to around 16 A. Technical data: Size: 0.8" × 1.0" × 0.16" Weight: 2.7 g Current carrying capacity: 16 A Minimum operating voltage: 4.5 V Maximum operating voltage: 40 V Reverse polarity protection? Yes PCB dev codes: Psw03b Other PCB codes: 0J9255 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2813

POL2813

€21.50

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu Big Pushbutton Power Switch with reverse polarity protection, MP

€5.30

Artikel aktuell nicht lieferbar

Details

Pololu Big Pushbutton Power Switch with reverse polarity protection, MP

The Pololu Pushbutton Power Switches are ingenious power control alternatives to bulky mechanical switches. The main function is a pushbutton-based, latching power control, where one push of the button switches the power supply on and another push switches it off. Additional control inputs enable extended applications such as automatic switch-off by the device to be supplied. This MP version operates from 4.5 V to 40 V and can supply continuous currents of up to approx. 8 A. Technical data: Size: 0.8" × 1.0" × 0.16" Weight: 2.7 g Current carrying capacity: 8 A Minimum operating voltage: 4.5 V Maximum operating voltage: 40 V Reverse polarity protection? Yes PCB dev codes: Psw03b Other PCB codes: 0J9255 Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2812

POL2812

€5.30

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu Big Pushbutton Power Switch with reverse polarity protection, SV

€4.20

Artikel aktuell nicht lieferbar

Details

Pololu Big Pushbutton Power Switch with reverse polarity protection, SV

The Pololu Pushbutton Power Switches are ingenious power control alternatives to bulky mechanical switches. The main function is a pushbutton-based, latching power control, where one push of the button switches the power supply on and another push switches it off. Additional control inputs enable extended applications such as automatic switch-off by the device to be supplied. This standard voltage (SV) version operates from 4.5 V to 40 V and can supply continuous currents of up to around 4 A. Technical data: Size: 0.6" × 0.7" × 0.12" Weight: 0.6 g Current carrying capacity: 4.3 A Minimum operating voltage: 4.5 V Maximum operating voltage: 40 V Reverse polarity protection? Yes PCB dev codes: Psw03a, psw03c Other PCB markings: 0J9124 LED colour: Green Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/2809

POL2809

€4.20

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu D36V50F5 5V, 5.5A step-down voltage regulator

€22.30

Artikel aktuell nicht lieferbar

Details

Pololu D36V50F5 5V, 5.5A step-down voltage regulator

This powerful synchronous switching buck converter accepts an input voltage of up to 50 V and efficiently reduces it to 5 V. The board measures only 1" × 1", but provides typical maximum continuous output currents between 3.5 A and 8 A depending on the input voltage and is therefore well suited for supplying medium to large loads. An optional activation input with a precise switch-off threshold can set the regulator to a low-current state, with a current consumption of 10 µA to 20 µA per volt at VIN. The regulator also features reverse polarity protection and a power good output that indicates when the regulator cannot maintain the output voltage sufficiently. Technical data: Size: 1" × 1" × 0.375" Weight: 7.0 g Minimum operating voltage: 5.5 V Maximum operating voltage: 50 V Continuous output current: 5.5 A Output voltage: 5 V Reverse voltage protection? Yes Maximum quiescent current: 4 mA Output type: Fixed 5V PCB dev codes: Reg24d Other PCB codes: 0J12574, blank white field Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/4091

POL4091

€22.30

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu distance sensor, 10cm

€10.30

Sofort verfügbar · 2 Stück · 1-3 days

Pololu distance sensor, 10cm

This small digital distance sensor detects objects at a distance of 2 cm and 10 cm. With its fast response time, small size and low power consumption, this sensor is a good choice for non-contact object detection, and our compact carrier board makes it easy to integrate into your project. Technical data: Size: 0.85" × 0.35" × 0.41" Weight: 1.5 g Maximum range: 10 cm Minimum range: 2 cm Sampling rate: 390 Hz Minimum operating voltage: 2.7 V Maximum operating voltage: 6.2 V Supply current: 5 mA Output type: Digital Further information as well as data sheets, instructions and downloads can be found at: https://www.pololu.com/product/1134

POL1134

€10.30

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu DRV8256P motor driver, 1.9A continuous, 6.4A peak, reverse polarity protection, 4.5-48V

€12.50

Sofort verfügbar · 3 Stück · 1-3 days

Pololu DRV8256P motor driver, 1.9A continuous, 6.4A peak, reverse polarity protection, 4.5-48V

Pololu DRV8256P Single Brushed DC Motor Driver Carrier The Pololu DRV8256P board is a compact solution for bidirectional control of a single brushed DC motor. It supports a wide operating voltage from 4.5 V to 48 V and delivers 1.9 A continuously (with a peak current of up to 6.4 A for <1 second), making it ideal for small motors operating over a wide voltage range. The DRV8256P has built-in protection functions such as reverse polarity protection, undervoltage cut-off, overcurrent protection and overtemperature protection, which significantly improve the service life and reliability of the driver. The two-pole IN/IN interface enables direct control of the motor outputs via PWM signals for full control over speed and direction. This board is an excellent choice for applications that require precise control and are operated in demanding environments. The integrated reverse polarity protection up to 40 V makes the board suitable for a wide range of electronics and robotics projects. Features at a glance Bidirectional control of a single brushed DC motor Motor supply voltage: 4.5 V to 48 V Supports logic voltages from 1.8 V to 5 V (max. 5.5 V) Output current: 1.9 A continuous (6.4 A peak) Protection against undervoltage, overcurrent and overtemperature Board provides additional reverse polarity protection up to 40 V Compact size: 0.6″ × 0.6″ Technical specifications Size: 0.6" × 0.6" Weight: 0.6 g Motor driver: DRV8256P Motor channels: 1 Minimum operating voltage: 4.5 V Maximum operating voltage: 48 V Continuous output current per channel: 1.9 A Peak output current per channel: 6.4 A Maximum PWM frequency: 100 kHz Minimum logic voltage: 1.8 V Maximum logic voltage: 5.5 V Reverse polarity protection: Yes Soldered header pins: No PCB development codes: Md42a Other PCB markings: 0J13491 Other data Minimal wiring structure for connection to a microcontroller Two-pin IN/IN interface for motor control SLEEP pin enables low power consumption and error reset Scope of delivery 1x Pololu DRV8256P Single Brushed DC Motor Driver Carrier 1x Header

POL4039

€12.50

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Pololu DRV8434 Stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, with header

€9.90

Artikel aktuell nicht lieferbar

Details

Pololu DRV8434 Stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, with header

Pololu DRV8434 stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, with header The Pololu DRV8434 stepper motor driver is a versatile module for controlling bipolar stepper motors. The module supports microstepping up to 1/256 step and works with an operating voltage of 4.5 V to 48 V. It delivers up to 1.2 A continuously per phase without additional cooling and can reach peak currents of 2 A for short periods. It is controlled via a simple step and direction interface and is compatible with 1.8 V, 3.3 V and 5 V systems. The driver has an integrated voltage regulator that enables easy integration into various projects. Protection mechanisms such as overtemperature shutdown, overcurrent protection and undervoltage protection are also integrated. Two intelligent current control modes ensure smooth movement of the motors without the need for manual adjustment. The module is based on the Texas Instruments DRV8434 stepper motor driver and is designed as a carrier module. The pre-installed headers enable direct use without additional soldering. The module is compatible with the widely used A4988 driver module and can be used as a replacement in many applications. The integrated spread spectrum clocking reduces electromagnetic interference, while the 4-layer, 2 ounce copper PCB provides improved heat dissipation. Pin Assignment VMOT - supply voltage for the motor (4.5-48 V) GND - Ground connection B1, B2, A1, A2 - connections for the motor phases FAULT - Status pin for error display TOFF - Control of the switch-off time DECAY0, DECAY1 - Selection of the dismantling modes M0, M1 - Setting the microstep resolution ENABLE - Activation or deactivation of the driver SLEEP - Sets the driver to sleep mode STEP - Control of the step signal DIR - Control of the direction of rotation Features at a glance Voltage range: 4.5 V to 48 V (not suitable for 48 V batteries) Current output: up to 1.2 A continuous per phase, 2 A peak current with additional cooling Integrated voltage regulator Compatible with 1.8 V, 3.3 V and 5 V systems Supports 11 microstep resolutions: up to 1/256 steps Six degradation modes, including two intelligent current control modes Protection mechanisms: Over-temperature shutdown, over-current protection, under-voltage protection Spread spectrum clock to reduce EMI Potentiometer for setting the current limit Compatibility Bipolar stepper motors Systems with 1.8 V, 3.3 V and 5 V Replacement for A4988 driver modules Technical specifications Dimensions: 0.6″ × 0.8″ Weight: 1.3 g (without pin header) Operating voltage: 4.5 V to 48 V Maximum current: 2 A (with cooling), continuous 1.2 A Supported microsteps: up to 1/256 steps Logic voltage: 1.8 V to 5.5 V No reverse voltage protection Other data PCB markings: md43a, 0J13721 Spread spectrum clock integrated Scope of delivery 1x DRV8434 stepper motor driver carrier with pre-soldered header Links Circuit diagram Dimensions Drilling drawings 3D models Data sheet

POL3763

€9.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Pololu DRV8434 stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, without header

€8.90

Artikel aktuell nicht lieferbar

Details

Pololu DRV8434 stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, without header

Pololu DRV8434 stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, without header The Pololu DRV8434 stepper motor driver is a versatile module for controlling bipolar stepper motors. The module supports microstepping up to 1/256 step and works with an operating voltage of 4.5 V to 48 V. It delivers up to 1.2 A continuously per phase without additional cooling and can reach peak currents of 2 A for short periods. It is controlled via a simple step and direction interface and is compatible with 1.8 V, 3.3 V and 5 V systems. The driver has an integrated voltage regulator that enables easy integration into various projects. Protection mechanisms such as overtemperature shutdown, overcurrent protection and undervoltage protection are also integrated. Two intelligent current control modes ensure smooth movement of the motors without the need for manual adjustment. The module is based on the Texas Instruments DRV8434 stepper motor driver and is designed as a carrier module. The header is included in the scope of delivery and must be soldered on yourself. The module is compatible with the widely used A4988 driver module and can be used as a replacement in many applications. The integrated spread spectrum clocking reduces electromagnetic interference, while the 4-layer, 2 ounce copper PCB ensures improved heat dissipation. Pin assignment VMOT - supply voltage for the motor (4.5-48 V) GND - Ground connection B1, B2, A1, A2 - connections for the motor phases FAULT - Status pin for error display TOFF - Control of the switch-off time DECAY0, DECAY1 - Selection of the dismantling modes M0, M1 - Setting the microstep resolution ENABLE - Activation or deactivation of the driver SLEEP - Sets the driver to sleep mode STEP - Control of the step signal DIR - Control of the direction of rotation Features at a glance Voltage range: 4.5 V to 48 V (not suitable for 48 V batteries) Current output: up to 1.2 A continuous per phase, 2 A peak current with additional cooling Integrated voltage regulator Compatible with 1.8 V, 3.3 V and 5 V systems Supports 11 microstep resolutions: up to 1/256 steps Six degradation modes, including two intelligent current control modes Protection mechanisms: Over-temperature shutdown, over-current protection, under-voltage protection Spread spectrum clock to reduce EMI Potentiometer for setting the current limit Compatibility Bipolar stepper motors Systems with 1.8 V, 3.3 V and 5 V Replacement for A4988 driver modules Technical specifications Dimensions: 0.6″ × 0.8″ Weight: 1.3 g (without pin header) Operating voltage: 4.5 V to 48 V Maximum current: 2 A (with cooling), continuous 1.2 A Supported microsteps: up to 1/256 steps Logic voltage: 1.8 V to 5.5 V No reverse voltage protection Other data PCB markings: md43a, 0J13721 Spread spectrum clock integrated Scope of delivery 1x DRV8434 Stepper Motor Driver Carrier 1x Header (not soldered together) Links Circuit diagram Circuit dimensions Drilling drawings 3D models Data sheet

POL3762

€8.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details