Pololu 75:1 micro metal geared motor HP 6V with extended motor shaft
Product number: POL2215
Order now and secure 10 Berrys
Description
Product information "Pololu 75:1 micro metal geared motor HP 6V with extended motor shaft"
This geared motor is a miniature high-performance DC motorwith 6 V and a 75.81:1 metal gearbox. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. This version also has a 4.5 × 1 mm extended motor shaft.
Important specifications:
Technical specifications:
https://www.pololu.com/product/2215
Important specifications:
| Voltage | 6 V |
| No-load power | 410 rpm, 70 mA |
| Stall extrapolation | 1.3 kgcm, 1.6 A |
Technical specifications:
- Size: 10 × 12 × 26 mm
- Weight: 9.5 g
- Shaft diameter: 3 mm
- Gear ratio: 75.81:1
- No-load speed @ 6 V: 410 rpm
- No-load current at 6 V: 0.07 A
- Standstill current at 6 V: 1.6 A
- Stopping torque at 6 V: 1.3 kg-cm
- Max. Output power @ 6V: 1.4 W
- Extended motor shaft? Yes
- Motor type: 1.6A stall @ 6V (HP 6V)
- Max. Efficiency @ 6V: 40
- Speed at max. efficiency: 340 rpm
- Torque at max. efficiency: 0.23 kg-cm
- Current at maximum efficiency: 0.34 A
- Output power at maximum efficiency: 0.80 W
https://www.pololu.com/product/2215
Properties
| Zolltarifnummer: | 85011099 |
|---|---|
| Brand: | Pololu |
| Country of Origin: | China |
| EAN: | 4060137051258 |
| Gross Weight (kg): | 0.010 |
| Manufacturer ID: | 2215 |
| Product ID: | POL2215 |
Manufacturer and safety information
Manufacturer information
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before use, ensure that the component is suitable for the intended application.
- Before installation, switch off the power supply to the device and secure it against being switched on again.
- Do not expose to mechanical or thermal loads outside the specifications.
- Avoid short circuits, overheating and overloading to prevent damage and safety risks.
- Do not use in potentially explosive atmospheres unless expressly certified for this purpose.
- Take care with moving parts to avoid injuries caused by mechanical impact.
- Do not make any modifications to the product, as this may impair its safety and function.
- In the event of damage or malfunctions, take the component out of operation immediately and have it checked by a specialist.
- After use, dispose of as electronic scrap or hazardous waste in accordance with local regulations.
- Do not dispose of with household waste; use environmentally friendly recycling options.
Reviews
0
Login