Pololu 100:1 HP 6V micro-metal geared motor with extended motor shaft
Product number: POL2214
Order now and secure 10 Berrys
Description
Product information "Pololu 100:1 HP 6V micro-metal geared motor with extended motor shaft"
This geared motor is a miniature DC motor with 6 V and a metal gearbox with a ratio of 100.37:1. It has a cross-section of 10 × 12 mm and the D-shaped gearbox output shaft is 9 mm long and has a diameter of 3 mm. This version also has a 4.5 × 1 mm extended motor shaft.
Specifications:
Technical specifications:
https://www.pololu.com/product/2214
Specifications:
| Voltage | 6 V |
| No-load power | 310 rpm, 70 mA |
| Stall extrapolation | 1.7 kg/cm, 1.6 A |
Technical specifications:
- Size: 10 × 12 × 26 mm
- Weight: 9.5 g
- Shaft diameter: 3 mm
- Gear ratio: 100.37:1
- No-load speed @ 6V: 310 rpm
- No-load current @ 6V: 0.07 A
- Stall current @ 6V: 1.6 A
- Stall torque @ 6V: 1.7 kg-cm
- Max output power @ 6V: 1.3 W
- Extended motor shaft?: Yes
- Motor type: 1.6A stall @ 6V (HP 6V)
- Max efficiency @ 6V: 37 %
- Speed at max efficiency: 250 rpm
- Torque at max efficiency: 0.29 kg-cm
- Current at max efficiency: 0.33 A
- Output power at max efficiency: 0.73 W
https://www.pololu.com/product/2214
Properties
| Zolltarifnummer: | 85011040 |
|---|---|
| Brand: | Pololu |
| Country of Origin: | China |
| EAN: | 4060137107597 |
| Gross Weight (kg): | 0.010 |
| Manufacturer ID: | 2214 |
| Product ID: | POL2214 |
Manufacturer and safety information
Manufacturer information
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before use, ensure that the component is suitable for the intended application.
- Before installation, switch off the power supply to the device and secure it against being switched on again.
- Do not expose to mechanical or thermal loads outside the specifications.
- Avoid short circuits, overheating and overloading to prevent damage and safety risks.
- Do not use in potentially explosive atmospheres unless expressly certified for this purpose.
- Take care with moving parts to avoid injuries caused by mechanical impact.
- Do not make any modifications to the product, as this may impair its safety and function.
- In the event of damage or malfunctions, take the component out of operation immediately and have it checked by a specialist.
- After use, dispose of as electronic scrap or hazardous waste in accordance with local regulations.
- Do not dispose of with household waste; use environmentally friendly recycling options.
Reviews
0
Login