PCX 120:1 mini plastic geared motor HP, offset 3mm D-shaft output, extended motor shaft
Product number: POL1520
Description
Product information "PCX 120:1 mini plastic geared motor HP, offset 3mm D-shaft output, extended motor shaft"
This compact, low-cost plastic geared motor(high-performance DC motor with brushed reduction gearbox 120:1) is well suited for use in small robots. Although it is designed for operation at 4.5 V, it should also run smoothly in the 3 V to 6 V range. The gearbox has a D-shaped output shaft with a length of 9.7 mm and a diameter of 3 mm, which is offset but parallel to the motor shaft, and a built-in safety clutch protects the gearbox from excessive loads. This version also has a 5×1.5 mm extended motor shaft.
Important specifications:
https://www.pololu.com/product/1520
Important specifications:
- Voltage
- No-load power
- Stall extrapolation
- 4.5 V
- 150 rpm, 130 mA
- 1.8 kgcm, 1.25 A
- Size: 36.5 x 20 x 27.4 mm
- Weight: 19 g
- Shaft diameter: 3 mm
- Shaft type: Offset 3mm D
- Typical operating voltage: 4.5 V
- Gear ratio: 120:1
- No-load speed at 4.5 V: 150 rpm
- No-load current at 4.5 V: 130 mA
- Standstill current at 4.5 V: 1250 mA
- Standstill torque at 4.5 V: 25 oz-in
- Extended motor shaft? Yes
https://www.pololu.com/product/1520
Properties
| Zolltarifnummer: | 85011099 |
|---|---|
| Brand: | Pololu |
| Country of Origin: | China |
| EAN: | 4060137019517 |
| Gross Weight (kg): | 0.020 |
| Manufacturer ID: | 1520 |
| Product ID: | POL1520 |
Manufacturer and safety information
Manufacturer information
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before use, ensure that the component is suitable for the intended application.
- Before installation, switch off the power supply to the device and secure it against being switched on again.
- Do not expose to mechanical or thermal loads outside the specifications.
- Avoid short circuits, overheating and overloading to prevent damage and safety risks.
- Do not use in potentially explosive atmospheres unless expressly certified for this purpose.
- Take care with moving parts to avoid injuries caused by mechanical impact.
- Do not make any modifications to the product, as this may impair its safety and function.
- In the event of damage or malfunctions, take the component out of operation immediately and have it checked by a specialist.
- After use, dispose of as electronic scrap or hazardous waste in accordance with local regulations.
- Do not dispose of with household waste; use environmentally friendly recycling options.
Reviews
0
Login