Metal film resistor, 6.8 Ohm, 1/4W, ±1%, 0207, axial, through-hole mounting
€0.07
Frequently Bought Together
24 items
Content: 17 Gramm (€10.00 / 100 Gramm)
Description
Product information "Metal film resistor, 6.8 Ohm, 1/4W, ±1%, 0207, axial, through-hole mounting"
This metal film resistor is characterised by its high precision and reliability. With a resistance value of 6.8 ohms and a tolerance of ±1%, it is ideal for numerous applications in electronics. Thanks to its 0207 design and axial wiring, it is ideal for through-hole mounting.
Features at a glance
- High precision: With a tolerance of ±1%, this resistor ensures accurate and reliable performance.
- Versatile applications: Suitable for various electronic applications due to its standardised 0207 design.
- Robust design: Axial wiring and through-hole mounting ensure a stable and safe installation.
- Resistor type: Metal layer
- Mounting: Through-hole mounting
- Operating voltage (AC/DC max., 70°C): 250V
- Short-term limit voltage (70°C): 500V
- Tolerance: ±1%
- Design: 0207
- Wiring: axial
- IEC colour code: 4 rings
- Design: loose
- Resistance: 6.8 Ohm
- Power output:
- at 70°C: 0.25W
- at 125°C: 0.1W
- 1x metal film resistor, 6.8 Ohm
Properties
| Zolltarifnummer: | 85332100 |
|---|---|
| Brand: | Frei |
| Country of Origin: | Taiwan |
| Form Factor: | axial |
| Gross Weight (kg): | 0.001 |
| Mounting: | THT |
| Power: | 0.25W |
| Product ID: | MSW6R8.25 |
| Resistance: | 6,8 Ohm |
| Tolerance: | ±1% |
| Type: | Metal Fim Resistor |
Manufacturer and safety information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
- When handling resistors, observe the voltage and current of the circuit to avoid overloading and overheating.
- Only use for the intended power and temperature range.
- Before installation, ensure that the resistor is free from damage.
- When using in electronic circuits, observe the polarity if necessary (e.g. for certain networks).
- De-energise the circuit before carrying out repair or replacement work.
- Do not continue to use defective or burnt resistors and replace them immediately.
- Dispose of resistors properly and in an environmentally friendly manner in accordance with local regulations.
- Do not reuse damaged products or external components after mechanical stress.
- Do not store or use in damp or extremely dusty environments.
Reviews 0
Login
