Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen
Menü
Beschreibung

Produktinformationen "Metal film resistor, 220.0 Ohm, 1/4W, ±1%, 0207, axial, through-hole mounting"

Metal film resistor 220.0 Ohm
This high-precision metal film resistor with a tolerance of ±1% and a maximum operating voltage of 250V AC/DC is ideal for reliable electronic applications. Thanks to its 0207 axial design and through-hole mounting, it is easy to integrate into circuits. Stable operation at temperatures up to 125°C.

Features at a glance
  • High accuracy: Provides a tolerance of ±1%, which is essential for precise circuit designs.
  • Reliable performance: Supports an operating voltage of up to 250V AC/DC and up to 500V for short periods, ideal for demanding operating conditions.
  • Easy installation: Through-hole mounting and axial wiring allow easy integration into existing designs.
Technical data
  • Resistor type: Metal layer
  • Mounting: Through-hole mounting
  • Operating voltage (AC/DC max., 70°C): 250V
  • Short-term limit voltage (70°C): 500V
  • Design: 0207
  • Wiring: axial
  • IEC colour code: 4 rings
  • Version: loose
  • Resistance: 220 Ohm
  • Tolerance: ±1%
  • Power output:
    • at 70°C: 0.25W
    • at 125°C: 0.1W
Scope of delivery
  • 1x metal film resistor, 220.0 Ohm
Eigenschaften
Zolltarifnummer: 85332100
Brand: Frei
Country of Origin: Taiwan
Form Factor: axial
Gross Weight (kg): 0.001
Mounting: THT
Power: 0.25W
Product ID: MSW220R.25
Resistance: 220,0 Ohm
Tolerance: ±1%
Type: Metal Fim Resistor
Manufacturer and safety information
Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de


Person responsible for the EU
See manufacturer information

Safety instructions
  • When handling resistors, observe the voltage and current of the circuit to avoid overloading and overheating.
  • Only use for the intended power and temperature range.
  • Before installation, ensure that the resistor is free from damage.
  • When using in electronic circuits, observe the polarity if necessary (e.g. for certain networks).
  • De-energise the circuit before carrying out repair or replacement work.
  • Do not continue to use defective or burnt resistors and replace them immediately.
  • Dispose of resistors properly and in an environmentally friendly manner in accordance with local regulations.
  • Do not reuse damaged products or external components after mechanical stress.
  • Do not store or use in damp or extremely dusty environments.
Bewertungen
0

0 von 0 Bewertungen

Durchschnittliche Bewertung von 0 von 5 Sternen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.


Produktgalerie überspringen

Kunden kauften auch

Durchschnittliche Bewertung von 4.6 von 5 Sternen

Breadboard with 830 contacts
Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance 830 contacts - Offers extensive connection options for components. Pitch: 2.54mm - Standard dimension for compatible plug-in options. Mounting: Double-sided adhesive tape - Simple and stable mounting. Technical data Number of contacts: 830 Dimensions: 165 x 55mm Grid dimension: 2.54mm Material: ABS plastic Mounting option: Double-sided adhesive tape on the back Can be plugged together: Latches for connecting several boards Scope of delivery 1 x breadboard with 830 contacts
€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Metal film resistor, 10.0 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting
Metal film resistor 10.0 kOhm 1/4W This metal film resistor with 10 kOhm is ideal for applications that require high precision. With a tolerance of ±1%, it offers reliable performance for electronics projects. Features at a glance Tolerance: ±1% - ensures high precision in circuits. Style 0207, axial wiring - facilitates through-hole mounting. IEC colour code: 4 rings - enables easy identification of resistor values. Technical data Resistor type: Metal layer Mounting: Through-hole mounting Operating voltage (AC/DC max., 70°C): 250V Short-term limit voltage (70°C): 500V Design: loose Resistance: 10 kOhm Design: 0207 Tolerance: ±1% Power output: at 70°C: 0.25W at 125°C: 0.1W Scope of delivery 1x metal film resistor, 10.0 kOhm
€0.05

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 4.9 von 5 Sternen

official Raspberry Pi Micro USB cable, red, 1.0m
This official Micro USB cable is designed for use with the Raspberry Pi Pico. It has been designed for optimum performance and functionality with the Raspberry Pi.Also suitable as a replacement for the official Raspberry Pi keyboard. Technical data Standard USB A 2.0 plug - micro USB 2.0 type B plug Nickel-plated contacts Cable length: 1m Colour: red
€1.80

Sofort verfügbar · 100+ Stück · 1-3 days

Metal film resistor, 100.0 Ohm, 1/4W, ±1%, 0207, axial, through-hole mounting
Metal film resistor 100.0 Ohm This high-quality metal film resistor offers a precise tolerance of ±1% and is ideal for through-hole mounting. With an operating voltage of up to 250V at 70°C and a short-time limit voltage of 500V, it is suitable for a wide range of applications in electronics. Features at a glance Tolerance: Ensures high precision with a tolerance of ±1%. High voltage capacity: Supports an operating voltage of up to 250V and a short-time limit voltage of 500V at 70°C. Colour coding: The resistor is provided with an IEC colour code of 4 rings for easy identification. Technical specifications Resistor type: Metal layer Mounting: Through-hole mounting Operating voltage (AC/DC max., 70°C): 250V Short-term limit voltage (70°C): 500V Tolerance: ±1% Design: 0207 Wiring: axial IEC colour code: 4 rings Design: loose Resistance: 100 Ohm Power: at 70°C: 0.25W at 125°C: 0.1W Scope of delivery 1x metal film resistor, 100 Ohm
€0.05

Sofort verfügbar · 100+ Stück · 1-3 days

Light sensor with digital output
Light sensor with high/low output. The sensitivity can be adjusted via a potentiometer. Technical data Operating voltage: 3.3 - 5V DC Potentiometer for adjusting the sensitivity Connections: VCC (3.3 - 5V), GND, high / low output2 LEDs (power and output) Ø mounting hole: 2.5 mm Dimensions: approx. 42 x 14 x 7.5 mm
€1.70

Sofort verfügbar · 100+ Stück · 1-3 days

7-segment display, 10mm, common anode, 40mcd, yellow
7-segment display, 10mm, yellow, common anode This 7-segment LED display combines functionality and efficiency in a compact design. With a clear yellow colour display achieved by a brightness of 8mcd, this display guarantees excellent visibility. The wavelength of 590nm ensures a bright yellow colour that is easily recognisable even in different lighting conditions. Features at a glance Bright yellow colour with a brightness of 8mcd makes it easy to see in different lighting conditions. Compact dimensions of 13x10x7mm enable use in confined spaces. Ideal for displaying numbers in electronic devices such as clocks, meters and other DIY electronics projects. Technical Data Display type: LED Display type: 7-segment Brightness: 8mcd Common electrode: Anode Dimensions: 13 x 10 x 7mm Colour: yellow Number of characters: 1 Character height: 9.9mm / 0.39" Wavelength: 590nm Mounting type: THT Scope of delivery 1x 7-segment display, 10mm, common anode, yellow
€0.67

Sofort verfügbar · 34 Stück · 1-3 days

Durchschnittliche Bewertung von 4.5 von 5 Sternen

Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm
Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm This short-stroke pushbutton is designed for vertical PCB mounting and has dimensions of 6x6mm and a button height of 5.0mm. It is suitable for applications with a contact load capacity of 0.05 A at 12 VDC and offers a switching force of 1.6N. Features at a glance High reliability: SPST-NO contact configuration and switching force of 1.6N. Versatility: Suitable for operating temperatures from -25 to 70°C. Easy mounting: Vertical PCB mounting with straight outputs. Technical data Switch type: Short-stroke pushbutton Number of switching positions: 1-digit Contact configuration: SPST-NO Contact rating DC (with resistive load): 0.05 A / 12 VDC Mounting: Push-through mounting Switching force: 1.6N Housing dimensions: 6 x 6mm Button height (PCB-measured): 5.0mm Switching mode: OFF-(ON) Button shape: round Output grid: 4.5 x 6.5mm Operating temperature: -25 to 70°C Button colour: black Outputs: PCB mounting, straight Max. Contact resistance: 50mΩ Min. insulation resistance: 100mΩ Soldering temperature: 250°C Scope of delivery 1x short-stroke push-button, vertical PCB mounting, 6x6mm, H 5.0mm
€0.09

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Raspberry Pi Pico, RP2040 microcontroller board, with headers
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. This version comes with populated pin headers (H=header) and a 3-pin JTAG connector. The most important features are: RP2040 microcontroller chip, developed by Raspberry Pi in the UK Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode Drag & drop programming with mass storage via USB 26x multifunctional GPIO pins 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels Precise clock and timer on-chip Temperature sensor Accelerated floating point libraries on the chip 8x programmable I/O state machines (PIO) for customised peripheral support3-pin JTAG connector40-pin pre-soldered pin header Further information about the Raspberry Pi Pico and how to get started can be found at https://www.raspberrypi.org/documentation/pico/getting-started/.
€5.50

Sofort verfügbar · 55 Stück · 1-3 days

Sound sensor with digital output
Sound sensor with digital output - for universal use! Features Can detect the sound intensity of the surrounding environment, use NOTE: This sensor is only to identify the voice of the presence or absence (according to the size or the specific frequency of the vibration principle) does not recognise the voice sound adjustable sensitivity (blue digital potentiometer adjustment) Operating voltage 3.3V-5V Output in the form of digital switching outputs (0=high and 1=low) with fixed bolt hole for easy installation Board PCB size: 3.2cm x 1.7cm Module wiring instructions VCC external 3.3V-5V voltage (can be directly connected with the a 5v microcontroller and 3.3v microcontroller) GND external GND OUT board switch output interface (0 and 1) Use Sound module is most sensitive to the ambient sound intensity is generally used to detect the intensity of the sound of the surrounding environment. Module at ambient sound intensity less than the set threshold value, OUT output is high, when the outside ambient sound intensity exceeds the threshold value is set, the module OUT output is LOW; The board digital output OUT is directly connected with the microcontroller through the microcontroller to detect high and low, to detect the sound of the environment; Scope of delivery Sound sensor
€1.44

Sofort verfügbar · 37 Stück · 1-3 days

Electrolytic capacitor, 100µF, 25V, 105°C, ±1%, radial, THT
Electrolytic capacitor, 100µF, 25V, 105°C, radial, THT This electrolytic capacitor is suitable for a wide range of applications in electronics. With a capacity of 100µF and an operating voltage of 25V DC, it offers reliable performance. The radial connections and THT (Through-Hole Technology) mounting allow easy integration into circuits. The capacitor is designed for an operating temperature of -40 to 105°C and has a service life of 2000 hours. Features at a glance Capacitance: 100µF - Ideal for applications requiring medium capacitance. Operating voltage: 25V DC - Suitable for common electronic circuits. High temperature resistance: up to 105°C - Can be used in high temperature environments. THT mounting: Easy to integrate into existing circuit boards. Long service life: 2000 hours - Reliable for long-term projects. Technical Data Capacitor type: electrolytic Mounting: THT Capacity: 100µF Operating voltage: 25V DC Housing dimensions: Ø6.3x11mm Output pitch: 2.5mm Tolerance: ±20% Lifetime: 2000h Operating temperature: -40...105°C Scope of delivery 1 x electrolytic capacitor, 100µF, 25V, 105°C, radial, THT
€0.10

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Jumper cable kit / set with 65 cables in 4 lengths for breadboards
This jumper cable set for breadboards consists of 65 cables in 4 different lengths. Technical data: Kit contains 65 jumper cables in 4 different lengths (4x 24cm, 4x 20cm, 8x 16cm, 49x 12cm)
€1.40

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Battery holder for 2x Mignon AA 1+1 with 150mm connection cable
Battery holder, 2x Mignon AAwith 150mm connection cableBattery holder suitable for cells of the type: 2x Mignon (AA)Dimensions: 16.5 x 109 x 14 mmConnection: with 150mm connection cable
€0.27

Sofort verfügbar · 48 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Soldering iron stand with soldering sponge holder
Soldering iron standfor storing soldering irons- Sturdy holder with base- Includes small soldering spongeTechnical data: - Consumption unit: 1 piece in a box - Length: 130.00 mm- Weight: 160.00 g- Width: 87.00 mm- Height: 122.00 mm
€3.30

Sofort verfügbar · 10 Stück · 1-3 days

Produktgalerie überspringen

Mehr von Frei

Reed sensor, reed contact, IP68, 11-16mm range, 10W switching capacity, 23x14.6x6mm, 500mA
€3.80

Sofort verfügbar · 6 Stück · 1-3 days

1 channel relay module with infrared remote control
€4.95

Sofort verfügbar · 7 Stück · 1-3 days

1 pair 6mm² / 10m solar string cable incl. mounted T4 plug
€31.00

Sofort verfügbar · 2 Stück · 1-3 days

10 segment LED bargraph display, 10 bars, 1x red / 3x yellow / 4x green / 1x blue
€0.75

Sofort verfügbar · 43 Stück · 1-3 days

10 x jumper, short version, open, RM 2.54mm, black
€1.00

Sofort verfügbar · 39 Stück · 1-3 days

12 segment linear LED bar / display, 8x green / 4x red
€0.90

Sofort verfügbar · 86 Stück · 1-3 days

1N4001 - Rectifier diode, THT, 50V, 1A, DO41
€0.08

Sofort verfügbar · 100+ Stück · 1-3 days

1N4148 - Switching diode, THT, 100V, 300mA, DO35
€0.04

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

2 channel network relay module
€35.50

Sofort verfügbar · 2 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

28BYJ-48 Stepper motor 5V DC + ULN2003A driver board
€2.20

Artikel aktuell nicht lieferbar

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, blau, 1,2m
€2.70

Ab Hersteller · 55 Stück · 3-5 Tage

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, rot, 1,2m
€2.70

Sofort verfügbar · 9 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

3-pole slide switch for breadboards
€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 4.1 von 5 Sternen

3.5" Display Shield for Arduino Uno / Mega
€19.50

Artikel aktuell nicht lieferbar

360° bendable HDMI adapter
€2.82

Sofort verfügbar · 4 Stück · 1-3 days

Durchschnittliche Bewertung von 4 von 5 Sternen

4-channel infrared receiver incl. remote control
€5.70

Artikel aktuell nicht lieferbar

4-way desktop socket strip with USB charging function (2x 1A) black
€17.10

Sofort verfügbar · 4 Stück · 1-3 days

Neu

Durchschnittliche Bewertung von 4 von 5 Sternen

4-way desktop socket strip with USB charging function (2x 1A) white
€14.90

Sofort verfügbar · 5 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V
€1.90

Sofort verfügbar · 100+ Stück · 1-3 days

5V 1 channel relay module with switch-on delay
€1.90

Sofort verfügbar · 19 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

5V laser diode, ø6mm, with connection cable
€0.75

Artikel aktuell nicht lieferbar

Neu
6-way desktop socket strip with USB charging function (2x 1A) black
€18.41

Sofort verfügbar · 1 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

ACS712 current sensor module 20A
€2.85

Sofort verfügbar · 25 Stück · 1-3 days

Durchschnittliche Bewertung von 3.5 von 5 Sternen

ACS712 current sensor module 30A
€2.85

Sofort verfügbar · 34 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

ACS712 Current sensor module 5A
€2.85

Sofort verfügbar · 3 Stück · 1-3 days

Activated carbon filter for smoke absorber
€1.90

Sofort verfügbar · 11 Stück · 1-3 days

Adapter 1x 6.3mm stereo jack plug - 2x 6.3mm stereo jack socket, black, 0.20m
€1.65

Sofort verfügbar · 1 Stück · 1-3 days

Adapter 3.5mm stereo jack plug - 6.3mm stereo jack socket, black, 0.20m
€0.78

Artikel aktuell nicht lieferbar

Adapter cable 6.35mm stereo jack plug - 2x RCA plug 1.5m
€0.93

Ab Hersteller · 100+ Stück · 3-5 Tage

Adapter cable 6.35mm stereo jack plug - 2x RCA socket 28cm
€0.80

Ab Hersteller · 100+ Stück · 3-5 Tage

Durchschnittliche Bewertung von 5 von 5 Sternen

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€2.56

Sofort verfügbar · 11 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€2.90

Ab Hersteller · 100+ Stück · 3-5 Tage

Durchschnittliche Bewertung von 5 von 5 Sternen

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€3.85

Ab Hersteller · 100+ Stück · 3-5 Tage

Durchschnittliche Bewertung von 5 von 5 Sternen

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€5.31

Sofort verfügbar · 1 Stück · 1-3 days

%

Durchschnittliche Bewertung von 5 von 5 Sternen

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€7.87 €8.90 (11.57% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

Kunden kauften auch
VARTA Longlife battery Alkaline 9V block
6LR61/6LP3146/9V Block (4922)Alkaline manganese battery (alkaline), 9 Vparticularly powerful for optimum performance in devices with high energy consumptionfor use in toys, computer accessories, torches, etc.Technical dataBatterySize 9V blockIEC name 6LR61/6LP3146Technology Alkaline manganese battery (alkaline)Voltage 9 VRechargeable noGeneralConsumable unit 1 pc. Blister packModel designation 4922Manufacturer designation 4922Length 48.5 mmWidth 17.5 mmHeight 26.5 mmWeight 44.3 g
€2.05

Sofort verfügbar · 8 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Battery clip for 9V blocks, I-shape, plastic housing
Goobay 1x 9 V block battery cliploose cable ends, water-repellentThe Goobay 9 V battery connector is water-repellent and made of durable material, which guarantees a long service life for the battery clip.The push-button connection can be connected to a 9 V block battery or a battery holder.The battery clip is ideal for connecting LEDs to a 9 V block.The battery connection cable has loose cable ends and an I-shape.The positive pole of the battery connection is labelled red.Technical dataConnection, type: loose cable endsSpecial feature: water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 14.5 mmColour: blackLength: 28 mmsuitable battery size: 9 V blocksuitable IEC battery types: 6F22, 6HR61, 6LR61/6LP3146
€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Electrolytic capacitor, 1000µF, 16V, 105°C, ±1%, radial, THT
Electrolytic capacitor, 1000µF, 16V, 105°C, radial, THT This electrolytic capacitor with a capacity of 1000µF and an operating voltage of 16V DC is ideal for applications that require high temperature resistance from -40 to 105°C. With a tolerance of ±20% and a service life of 2000 hours, it is designed for long-term performance. With a tolerance of ±20% and a service life of 2000 hours, it is designed for long-lasting performance. Features at a glance High capacity of 1000µF for stable voltage levels. THT mounting for easy integration into circuits. Designed for extreme operating temperatures, ideal for demanding environments. Technical specifications Capacitor type: electrolytic Mounting: THT Capacity: 1000µF Operating voltage: 16V DC Housing dimensions: Ø10x16mm Output pitch: 5mm Tolerance: ±20% Lifetime: 2000h Operating temperature: -40...105°C Scope of delivery 1x electrolytic capacitor, 1000µF, 16V, 105°C, radial, THT
€0.29

Sofort verfügbar · 100+ Stück · 1-3 days

Electrolytic capacitor, 100µF, 25V, 105°C, ±1%, radial, THT
Electrolytic capacitor, 100µF, 25V, 105°C, radial, THT This electrolytic capacitor is suitable for a wide range of applications in electronics. With a capacity of 100µF and an operating voltage of 25V DC, it offers reliable performance. The radial connections and THT (Through-Hole Technology) mounting allow easy integration into circuits. The capacitor is designed for an operating temperature of -40 to 105°C and has a service life of 2000 hours. Features at a glance Capacitance: 100µF - Ideal for applications requiring medium capacitance. Operating voltage: 25V DC - Suitable for common electronic circuits. High temperature resistance: up to 105°C - Can be used in high temperature environments. THT mounting: Easy to integrate into existing circuit boards. Long service life: 2000 hours - Reliable for long-term projects. Technical Data Capacitor type: electrolytic Mounting: THT Capacity: 100µF Operating voltage: 25V DC Housing dimensions: Ø6.3x11mm Output pitch: 2.5mm Tolerance: ±20% Lifetime: 2000h Operating temperature: -40...105°C Scope of delivery 1 x electrolytic capacitor, 100µF, 25V, 105°C, radial, THT
€0.10

Sofort verfügbar · 100+ Stück · 1-3 days

Metal film resistor, 100.0 Ohm, 1/4W, ±1%, 0207, axial, through-hole mounting
Metal film resistor 100.0 Ohm This high-quality metal film resistor offers a precise tolerance of ±1% and is ideal for through-hole mounting. With an operating voltage of up to 250V at 70°C and a short-time limit voltage of 500V, it is suitable for a wide range of applications in electronics. Features at a glance Tolerance: Ensures high precision with a tolerance of ±1%. High voltage capacity: Supports an operating voltage of up to 250V and a short-time limit voltage of 500V at 70°C. Colour coding: The resistor is provided with an IEC colour code of 4 rings for easy identification. Technical specifications Resistor type: Metal layer Mounting: Through-hole mounting Operating voltage (AC/DC max., 70°C): 250V Short-term limit voltage (70°C): 500V Tolerance: ±1% Design: 0207 Wiring: axial IEC colour code: 4 rings Design: loose Resistance: 100 Ohm Power: at 70°C: 0.25W at 125°C: 0.1W Scope of delivery 1x metal film resistor, 100 Ohm
€0.05

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 4.6 von 5 Sternen

Breadboard with 830 contacts
Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance 830 contacts - Offers extensive connection options for components. Pitch: 2.54mm - Standard dimension for compatible plug-in options. Mounting: Double-sided adhesive tape - Simple and stable mounting. Technical data Number of contacts: 830 Dimensions: 165 x 55mm Grid dimension: 2.54mm Material: ABS plastic Mounting option: Double-sided adhesive tape on the back Can be plugged together: Latches for connecting several boards Scope of delivery 1 x breadboard with 830 contacts
€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Flat nose pliers 125mm with flattened and smooth jaws
Flat nose pliers 125mm with flattened and smooth jaws (3cm)high-precision small pliersextra hardened tool steel for a long service lifenickel-plated finishwith double spring mechanismnon-slip, insulated handle
€3.35

Sofort verfügbar · 3 Stück · 1-3 days

seeed Grove - RGB LED with variable colour v1.1
Seeed Grove - Variable Colour LED V1.1 The Grove - Variable Colour LED V1.1 is an RGB LED module that can be controlled both via digital signals and pulse width modulation (PWM). The module has three variable resistors on the circuit board with which the red, green and blue colours can be individually adjusted. The three resistors each control the R, G and B channels of the LED, enabling variable colour mixing. The module uses an 8 mm RGB LED and works with an operating voltage of 5V DC. The LED lights up when a high signal is applied to the SIG pin. The integration of a logic IC in version 1.1 improves compatibility with logic DC sockets. If no logic DC socket is used, the use of this version does not differ from that of the first version. The Grove - Variable Colour LED V1.1 module is compatible with platforms such as Raspberry Pi and Arduino and is suitable for applications in toy development or as a decorative lighting element. The Grove connection ensures easy integration and "plug and play" functionality. The control via logic IC or pulse width modulation allows light changes to be implemented particularly sensitively and precisely. Care should be taken when adjusting the resistors to avoid damaging them. Features at a glance RGB colour control via three adjustable resistors Control via digital signals or pulse width modulation Compatible with Raspberry Pi and Arduino Grove connection for easy integration Compatibility Raspberry Pi Arduino Grove-compatible platforms Technical specifications Dimensions: 20 mm x 20 mm x 30 mm Weight: 7 g Battery: Not included Operating voltage: 3.3V / 5V Operating current: 20 mA Resistance of the variable resistors: <1 KΩ Other data 8 mm RGB LED for colour projection Improved version with integrated logic IC Scope of delivery 1x Grove - Variable Colour LED V1.1 1x Grove cable Links Grove Variable Colour LED V1.1 Eagle files
€4.40

Sofort verfügbar · 20 Stück · 1-3 days

Durchschnittliche Bewertung von 3 von 5 Sternen

Metal film resistor, 1.0 kOhm, 0.6W, ±1%, 0207, axial, through-hole mounting
Metal film resistor, 1.0 kOhm, 0.6W, ±1%, 0207, axial, through-hole mounting A precise metal film resistor with 0.6W power and a tolerance of ±1%. This resistor is designed for through-hole mounting (THT) and offers a maximum operating voltage of 350V. With its axial wiring and compact housing dimensions, it is ideal for use in a wide range of electronic applications. Features at a glance High precision: Offers a tolerance of ±1% for reliable performance. Compact dimensions: Housing dimensions of Ø2.4x6.3mm and output dimensions of Ø0.55x28mm facilitate integration into circuits. Technical specifications Resistor type: Metal film resistor Mounting: THT (through-hole mounting) Resistance: 1 kOhm Power: 0.6W Tolerance: ±1% Max. Operating voltage: 350V Housing dimensions: Ø2.4 x 6.3mm Output dimensions: Ø0.55 x 28mm Temperature coefficient: 50ppm/°C Outputs: axial Scope of delivery Metal film resistor, 1.0 kOhm
€0.06

Sofort verfügbar · 100+ Stück · 1-3 days

KY-011, 2-colour / bi-colour 5mm LED module, red-green
KY-011, 2-colour / bi-colour 5mm LED module, red-green The KY-011 module is equipped with a bi-colour LED that can light up in the colours red and green. The LED has a common cathode. Depending on the input voltage, series resistors are required to ensure safe operation. Features at a glance Bi-colour LED - Can light up in the colours red and green. Common cathode - Simplifies the circuit. Series resistors required - 120Ω at 3.3V and 220Ω at 5V. Technical data Operating voltage: 2 - 2.5 V Maximum current consumption: 20mA Dimensions: 19 x 15.5 x 11 mm Values of the series resistors: 120Ω at 3.3V, 220Ω at 5V Scope of delivery 1 x KY-011 bi-colour LED module
€0.90

Sofort verfügbar · 100+ Stück · 1-3 days