Frei
Metal film resistor, 2.2 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting
Produktnummer: MSW2K2.25
Jetzt Bestellen und 1 Berrys sichern
Beschreibung
Produktinformationen "Metal film resistor, 2.2 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting"
Metal film resistor, 2.2 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting
This metal film resistor with 2.2 kOhm is ideal for applications in electronics where a precise resistance tolerance of ±1% and reliable performance are required. It is suitable for through-hole mounting and has a design of 0207.
Features at a glance
This metal film resistor with 2.2 kOhm is ideal for applications in electronics where a precise resistance tolerance of ±1% and reliable performance are required. It is suitable for through-hole mounting and has a design of 0207.
Features at a glance
- Precise metal film resistor with ±1% tolerance
- Suitable for through-hole mounting
- Output of 0.25W at 70°C
- Resistor type: Metal film
- Mounting: Through-hole mounting
- Operating voltage (AC/DC max., 70°C): 250V
- Short-term limit voltage (70°C): 500V
- Tolerance: ±1%
- Design: 0207
- Wiring: axial
- IEC colour code: 4 rings
- Design: loose
- Resistance: 2.2 kOhm
- Power:
- at 70°C: 0.25W
- at 125°C: 0.1W
- 1x metal film resistor, 2.2 kOhm
Eigenschaften
| Zolltarifnummer: | 85332100 |
|---|---|
| Brand: | Frei |
| Country of Origin: | Taiwan |
| Form Factor: | axial |
| Gross Weight (kg): | 0.001 |
| Mounting: | THT |
| Power: | 0.25W |
| Product ID: | MSW2K2.25 |
| Resistance: | 2,2 kOhm |
| Tolerance: | ±1% |
| Type: | Metal Fim Resistor |
Manufacturer and safety information
Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
- When handling resistors, observe the voltage and current of the circuit to avoid overloading and overheating.
- Only use for the intended power and temperature range.
- Before installation, ensure that the resistor is free from damage.
- When using in electronic circuits, observe the polarity if necessary (e.g. for certain networks).
- De-energise the circuit before carrying out repair or replacement work.
- Do not continue to use defective or burnt resistors and replace them immediately.
- Dispose of resistors properly and in an environmentally friendly manner in accordance with local regulations.
- Do not reuse damaged products or external components after mechanical stress.
- Do not store or use in damp or extremely dusty environments.
Bewertungen
0
Anmelden
