LP-552035 Lithium-Polymer / LiPo battery, 3.7V, 350mAh with 2 pin JST connector
€3.90
Frequently Bought Together
25 items
Content: 1 Milliliter (€350.00 / 100 Milliliter)
Description
Product information "LP-552035 Lithium-Polymer / LiPo battery, 3.7V, 350mAh with 2 pin JST connector"
Ideal for the mobile power supply of DIY projects.
Technical data
- Nominal voltage: 3.7V
- Nominal capacity: 350mAh
- integrated protection electronics to protect against overcharging, deep discharging and short circuits
- Charging voltage: 4.2V
- Charging current:
- Standard charge: 0.5C=175mA
- Quick charge: 1C=350mA
- Charging method Standard charging: Charge current to 0.5C and charge to 4.2V, then continue charging with 4.2V charging voltage until the charging current drops to ≤0.05C.
- Charging time:
- Standard charge: approx. 3 hours
- Quick charge: approx. 2 hours
- Maximum charging current: 1C=350mA
- Maximum discharge current: 3C=1050mA
- Final discharge voltage: 3.0V
- Operating temperature: 0 - 45°C
- Cycle life: > 500 (test conditions: Charge: 0.5C to 4.2V, Discharge: 0.5C to 3.0V, 70% or more of first cycle capacity at 0.5C discharge of operation)
- Connector type: JST PH 2.0
- Length of connection cable: approx. 9cm
- Dimensions: approx. 35.5 x 20.0 x 5.5 mm
Safety instructions
Please read the safety regulations for lithium polymer cells to avoid potential hazards before use. These can be found under Downloads or
here. We are not liable for any damage caused by improper use of these batteries. By purchasing this product, you recognise these instructions
Properties
| Zolltarifnummer: | 85076000 |
|---|---|
| Brand: | PKCell |
| Country of Origin: | China |
| EAN: | 4251266702177 |
| Gross Weight (kg): | 0.008 |
| Manufacturer ID: | LP-552035-J |
| Product ID: | LP-552035-J |
| Voltage: | 3.7V DC |
Manufacturer
PKCell
PKCell – LiPo batteries for small projects
PKCell is a Chinese battery manufacturer that has been producing since the 1990s. Particularly relevant for makers are the lithium polymer batteries, used wherever a project is meant to work without a cable.
LiPo cells are flat, light and can be produced in almost any format – which makes them interesting for portable devices, sensor nodes and wearables, where a round cell simply will not fit. The range extends from 100 mAh for tiny applications to 2500 mAh for longer runtimes.
Important in practice: the batteries come fitted with a JST connector and an integrated protection circuit that guards against deep discharge, overcharging and short circuit. This allows them to be connected directly to common charging modules and development boards.
At BerryBase you will find PKCell LiPo batteries for mobile projects, sensing, wearables and model making.
Manufacturer and safety information
Shenzhen PKCELL Battery Co.,Ltd.
902, Tower B, Hongrongyuan North Station Centre, North Station Community, Minzhi Street,
CN 518109 Longhua District, Shenzhen,
https://www.pkcellpower.com
sales@pkcellpower.com
WEEE number: 76791134
Responsible person for the EU
Welectron
Haid-und-Neu-Str. 7
DE 76131 Karlsruhe
https://www.welectron.com
info@welectron.com
Safety instructions
- Do not throw batteries into fire or expose to extreme heat - risk of explosion.
- Do not open, dismantle or damage batteries - danger from leaking chemicals.
- Observe polarity when connecting - risk of short circuit and possible damage to the device.
- Only use compatible chargers - risk of fire or explosion.
- Protect batteries from direct contact with water or moisture - avoid short-circuit damage.
- Tape contacts before disposal to prevent short circuits.
- Only dispose of industrial batteries at designated collection points or recycling centres.
- Never dispose of in household waste - risk of environmental pollution.
- Dispose of defective batteries properly and do not reuse them - safety risk.
- Always store batteries in a cool and dry place, away from flammable materials.
Reviews 3
Login
3 reviews
6 October 2022 00:00
-
-
8 September 2022 00:00
-
-
9 November 2021 00:00
-
-
Accessories
Customers also viewed
