Konverter, USB Typ A Stecker - UART, CP2102

  • AUSB-UART-CP
  • |
  • 700646947836
  • 6.45€ *

    including VAT plus shipping costs

    Available immediately
    236 piece · 2 - 4 working days

    Variant

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    Notice

    Frequently Bought Together
    Konverter, USB Typ A Stecker - UART, CP2102
    Konverter, USB Typ A Stecker - UART, CP2102
    6.45€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.32€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.92€
    40pin Jumper / Dupont Kabel Male – Female trennbar 0,10 m
    40pin Jumper / Dupont Kabel Male – Female trennbar 0,10 m
       
    1.61€
    USB - TTL / UART / RS232 Adapterkabel mit PL2303HX Chipsatz
    USB - TTL / UART / RS232 Adapterkabel mit PL2303HX Chipsatz
       
    2.22€
    =
    Total:
    13.52€*
    VAT included. plus shipping and handling
    Frequently Bought Together
    Konverter, USB Typ A Stecker - UART, CP2102
    Konverter, USB Typ A Stecker - UART, CP2102
    6.45€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.32€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.92€
    40pin Jumper / Dupont Kabel Male – Female trennbar 0,10 m
    40pin Jumper / Dupont Kabel Male – Female trennbar 0,10 m
       
    1.61€
    USB - TTL / UART / RS232 Adapterkabel mit PL2303HX Chipsatz
    USB - TTL / UART / RS232 Adapterkabel mit PL2303HX Chipsatz
       
    2.22€
    =
    Total:
    13.52€*
    VAT included. plus shipping and handling
    Overview The CP2102 USB UART Board (micro) is an accessory board that features the... more
    "Konverter, USB Typ A Stecker - UART, CP2102"
    Overview

    The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

    CP2102 features:
    • Single-Chip USB to UART Data Transfer
      • No external resistors required, no external crystal required
      • On-chip power-on reset circuit and voltage regulator
      • Integrated 1024-Byte EEPROM
    • USB Function Controller
      • USB Specification 2.0 compliant; full-speed (12 Mbps)
      • USB suspend states supported via SUSPEND pins
    • UART
      • All handshaking and modem interface signals
      • Data formats supported:
        • Data bits: 5, 6, 7, and 8
        • Stop bits: 1, 1.5, and 2
        • Parity: odd, even, no parity
      • Baud rates: 300 bps to 1 Mbits
      • 576 Byte receive buffer; 640 byte transmit buffer
      • Hardware or X-On/X-Off handshaking supported
      • Event character support
    • Virtual COM Port Device Drivers
      • Windows 8/7/Vista/Server 2003/XP/2000
      • MAC OS-X/OS-9
      • Linux 2.40 or higher
    • USBXpress Direct Driver Support
      • Windows 7/Vista/Server 2003/XP/2000
    • Temperature Range
      • –40 to +85 °C

    Features
    • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
    • Voltage output support: 5V or 3.3V
    • Integrated USB protection device: SP0503
    • 3 LEDs: TXD LED, RXD LED, POWER LED
    • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
    • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
    How to Use

    In the case of working with a MCU:
    • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
    • GND: connects to GND
    • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
    • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
    • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
    • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
    Note: VCP examples and USBXpress driver program library are provided.


    Package Content
    • CP2102 USB UART Board (micro) × 1
    • 4-pin male pinheader & 4-pin female pinheader × 2
    • 6-pin custom connector jumper wire × 1

    Development Resources
    Related links to "Konverter, USB Typ A Stecker - UART, CP2102"
    Data "Konverter, USB Typ A Stecker - UART, CP2102"
    Gross weight (in kg): 0.013
    Order number: AUSB-UART-CP
    EAN/UPC: 700646947836
    Manufacturer: Waveshare
    Manufacturer Number: CP2102 USB UART Board (type A)
    HS-Code: 85444290
    Country of origin: China
    Read, write and discuss reviews... more
    Customer evaluation for "Konverter, USB Typ A Stecker - UART, CP2102"
    Write an evaluation
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    The fields marked with * are required.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Content 10 Meter (0.13€ * / 1 Meter)
    1.32€ *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Content 10 Meter (0.19€ * / 1 Meter)
    1.92€ *
    Viewed

    Switch to the appropriate shop now

    We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.