IR line tracking sensor with digital output

Frei

IR line tracking sensor with digital output

Name: IR line tracking sensor with digital output
Brand: Frei
SKU: KY-033
Price: 1.6 EUR
Availability: LimitedAvailability

Produktnummer: KY-033

€1.60

Jetzt Bestellen und
1 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

Sofort verfügbar · 2 Stück · 1-3 days

Menge prüfen

Sofort verfügbar

2 Stück : 1-3 days

99% positive Bewertung

Kostenloser Versand ab 79€*

Support

Wird oft zusammengekauft

Produktinformationen "IR line tracking sensor with digital output"

The sensor recognises whether it is in front of a light-reflecting or light-absorbing surface, and can be used primarily for line tracking. Thanks to this sensor, a robot could be programmed to follow a painted track.
The TCRT5000 reflective sensor emits an infrared beam and uses a photo sensor to measure how much of this beam is reflected back at it. It passes this on by illuminating an LED and as a digital output. If the sensor is on a black line (absorbing surface), the LED remains off and the digital signal is set to On. If it steps out of the line (reflecting surface), the LED lights up and the digital output is set to Off. The built-in potentiometer can be used to regulate how sensitively the KY-033 measures and thus distinguishes between the On and Off states.
The sensor is easy to install thanks to the two drill holes in the circuit board.

Technical features

Operating voltage: 3.3-5V DC
Operating current: 20mA
Operating temperature: -10°C - +50°C
Detection distance: 2-40cm
Dimensions: 42 × 10.5 mm

Pin assignment

VCC - power supply
OUT - signal (depending on IR measurement)
GND - ground

Zolltarifnummer:	84733020
Brand:	Frei
Country of Origin:	China
EAN:	4251266707509
Gross Weight (kg):	0.001
Manufacturer ID:	KY-033
Product ID:	KY-033

Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de

Person responsible for the EU
See manufacturer information

Safety instructions

Only use in dry indoor areas to avoid damage caused by moisture.
Keep away from direct sunlight or extreme temperatures.
Ensure that the operating voltage corresponds to the technical specifications.
Only connect using a suitable cable and plug.
Protect the product from mechanical damage, vibrations and shocks.
Always switch off the power supply during installation and maintenance.
Protect electronic components from electrostatic discharge (ESD).
Use only by trained personnel.
Do not repair defective products without authorisation, but dispose of them properly.
Dispose of batteries or rechargeable batteries in accordance with local regulations.
Do not dispose of with household waste, but pass it on to certified collection centres.

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Kunden kauften auch

7 segment LED display module, I2C interface, TM1637, 14mm, red

This board contains a clock face with four LED 7-segment displays (with a colon in the second position for e.g. clock times), a TM1637 driver IC and 4 pins for connection to a microcontroller (Raspberry Pi, Arduino, ...) Features 4x 7-segment display with red LEDs Operating voltage: 5V DC 4-pin I2C interface Chipset: TM1637 4 M2 drill holes for mounting Dimensions: 41 (47 with pins) x 22 x 11mm Display dimensions: 30 x 14mm

€1.40

Sofort verfügbar · 99 Stück · 1-3 days

7 segment LED display module, I2C interface, TM1637, 14mm, red

TM1637-4DR

€1.40

Sofort verfügbar · 99 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

HC-SR04 Ultrasonic sensor

Ultrasonic sensor - Ideal for use with the Raspberry Pi or Arduino. Technical data - Operating voltage: 5V DC - Current consumption: 15 mA - Quiescent current: < 2mA - Detection angle: <=15° - Detection range: 2 - 450 cm - Accuracy: 3 mm - Input trigger signal: TTL pulse 10µS - Output signal: TTL Low active - Operating temperature: -15 - 70° - Board dimensions: 46 x 20 x 13 mm

€1.49

Sofort verfügbar · 100+ Stück · 1-3 days

HC-SR04 Ultrasonic sensor

HC-SR04

€1.49

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Breadboard with 400 contacts

Breadboard with 400 contacts This breadboard makes it possible to quickly build simple, on-the-fly circuits. It can be extended by stringing several units together. The use of ABS plastic and the latches on the sides allow flexible and stable assembly. Features at a glance Enables quick and easy assembly of flying circuits. Several boards can be connected using the latches on the sides. Technical data Contacts: 400 Dimensions: 83 x 55 mm Grid: 2.54 mm Material: ABS plastic Fastening: Double-sided adhesive tape on the back Scope of delivery 1x breadboard with 400 contacts

€1.50

Sofort verfügbar · 100+ Stück · 1-3 days

Breadboard with 400 contacts

BB-400P

€1.50

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Breadboard with 830 contacts

Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance 830 contacts - Offers extensive connection options for components. Pitch: 2.54mm - Standard dimension for compatible plug-in options. Mounting: Double-sided adhesive tape - Simple and stable mounting. Technical data Number of contacts: 830 Dimensions: 165 x 55mm Grid dimension: 2.54mm Material: ABS plastic Mounting option: Double-sided adhesive tape on the back Can be plugged together: Latches for connecting several boards Scope of delivery 1 x breadboard with 830 contacts

€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Breadboard with 830 contacts

BB-830P

€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board

Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne. Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt. RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren. Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen. Technische Daten Formfaktor: 21 mm × 51 mm CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins Peripherie: 2 × UART 2 × SPI-Controller 2 × I2C-Controller 24 × PWM-Kanäle 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung 12 × PIO-Zustandsmaschinen Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2 Eingangsspannung: 1,8–5,5V DC Betriebstemperatur: -20°C bis +85°C Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion Downloads Raspberry Pi Pico 2 Product Brief Raspberry Pi Pico 2 MicroPython SDK Raspberry Pi Pico 2 C/C++ SDK RP2350 Datenblatt

€7.50

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board

RPI-PICO2-W

€7.50

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

TTP223 Capacitive touch sensor / push-button

This capacitive push-button is ideal for switching operations without wear or mechanical actuation. The module is simply connected to a supply voltage and outputs a high level via the I/O connection when approached. Thanks to the capacitive mode of operation, the module can also be installed behind objects such as thin glass panels or cabinet doorsTechnical data: Supply voltage: 2.4 - 5.5 voltsDimensions: approx. 15 x 11 mm

€0.40

Sofort verfügbar · 15 Stück · 1-3 days

TTP223 Capacitive touch sensor / push-button

SW223-1

€0.40

Sofort verfügbar · 15 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

HC-SR501 PIR Sensor - Infrared motion detector

Infrared motion detector - ideal for use with the Raspberry Pi. Technical DataOperating voltage: 5 - 20V DCQuiescent current: 65µAOutput voltage level: 3.3V high / 0V lowDelay time adjustable (0.3 - 18 seconds)Switching time (adjustable): 5 - 200 secondsRange (adjustable): 3 - 7 metresBlocking time: 2.5 secondsDetection range: 140°Trigger methods:L unrepeatable triggerH repeatable triggerTrigger can be switched via solder bridge!Operating temperature: -15 - 70°Board dimensions: 32 x 24 mmScrew hole spacing: 28 mmHole diameter: 2 mmDiameter of sensor lens: 23 mm

€2.15

Sofort verfügbar · 100+ Stück · 1-3 days

HC-SR501 PIR Sensor - Infrared motion detector

HC-SR501

€2.15

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Analogue 2-axis joystick module with select button

2-axis joystick module with analogue outputs and a select button (centre button). Can also be operated with the Raspbery Pi together with an MCP3008. Technical data 5V operating voltage 2 axes (x, y) Operating LED Connections accessible via pin header (RM 2.54mm) Pin assignment: - =Ground +=5V operating voltage B=Button output X=Output for X-axis Y=Output for Y-axis Board dimensions: approx. 40.10 x 26.05 mm (without pin header) Diameter of mounting holes: 3.1 mm Scope of delivery Joystick module rubberised navigation cap

€1.55

Sofort verfügbar · 20 Stück · 1-3 days

Analogue 2-axis joystick module with select button

JYSM-1

€1.55

Sofort verfügbar · 20 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

36-piece universal sensor kit for Arduino and Raspberry Pi in plastic box

Overview of the sensor kit This sensor kit can be used universally, for example for Arduino, Raspberry Pi and consists of 36 different sensors / modules + a plastic box. The kit is supplied in a sturdy plastic assortment box with 36 compartments. Features of the sensors Microphone with amplifier, HW-496 Sound sensor, HW-485 Touch sensor, HW-494 Flame sensor, HW-491 Reed switch, HW-484 Linear Hall sensor, HW-509 Digital temperature sensor, HW-503 Light barrier, HW-488 Passive buzzer module, HW-508 5mm RGB LED module, clear, HW-479 Tilt switch sensor module, HW-501 Mini reed switch, HW-497 5mm infrared LED module, HW-489 LDR photoresistor module, HW-486 5mm RG LED module, diffuse, HW-480 Ball switch tilt sensor module, SW-520D SMD RGB LED module, HW-478 Vibration sensor module, HW-500 3mm RG LED module, diffuse, HW-477 Short-stroke push-button module, HW-483 Light Interruption Sensor Module, HW-487 DHT11 Temperature & humidity module, HW-507 A3144 Hall sensor module, HW-492 Finger Recognition / Heartbeat Module, HW-502 Infrared receiver module, HW-490 Vibration switch module, HW-513 DS18B20 Temperature sensor module, HW-506 Active buzzer module, HW-512 Magnetic Hall module, HW-495 RGB LED module with automatic colour change, HW-481 Laser module, KY-008 1 channel relay module, HW-482 Ball switch tilt sensor module, SW-420 Joystick module, HW-504 Thermistor module, HW-498 Encoder module, HW-040 TCRT5000 Tracking module, HW-511 Compatibility Universally applicable for Arduino, Raspberry Pi and other microcontroller platforms Scope of delivery 36 sensors / modules Plastic assortment box with 36 compartments

€19.50

Sofort verfügbar · 5 Stück · 1-3 days

36-piece universal sensor kit for Arduino and Raspberry Pi in plastic box

SKIT37

€19.50

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Heat shrink tubing set, 100 pieces in assortment box, black

The practical all-rounders in a universal set! The tubes shrink when heat is generated. Perfect as cable insulation for modelling, computer or hi-fi applications. Also ideal as a quick repair kit for electrical cables and components. In a handy storage box. - the 6 most common sizes are pre-cut to 10 cm, eliminating the need for tedious cutting!- 30x 1.5mm-Ø- 30x 2.5mm-Ø- 20x 4.0mm-Ø- 10x 6.0mm-Ø- 6x 10.0mm-Ø- 4x 13.0mm-Ø- Scope of delivery: 100-piece heat shrink tubing set

€2.50

Sofort verfügbar · 12 Stück · 1-3 days

Heat shrink tubing set, 100 pieces in assortment box, black

T1535533

€2.50

Sofort verfügbar · 12 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

Acrylic housing for Raspberry Pi Zero W / WH

Features suitable acrylic case for Raspberry Pi Zero W / WH all connections are freely accessible Memory card can be changed while installedRecess above the processor allows the installation of a heat sink (not included) Simple assembly Suitable for Raspberry Pi Zero W Raspberry Pi Zero WH Please make sure to remove all protective films from the housing parts before mounting so that the housing shines in full splendour. Note: The Raspberry Pi is for presentation purposes only and is not included in the scope of delivery!

€1.85

Sofort verfügbar · 100+ Stück · 1-3 days

Neu

Acrylic housing for Raspberry Pi Zero W / WH

RPIZ-CASE-TR

€1.85

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery holder for 3x Mignon AA with push-button connection

Battery holder, 3x Mignon AAwith push-button connectionBattery holder suitable for cells of type: 3x Mignon (AA)Dimensions: 57.8 x 16.6 x 48.2 mmConnection: with push-button connectionRoHS-compliant

€0.49

Sofort verfügbar · 89 Stück · 1-3 days

Mehr von Frei

Reed sensor, reed contact, IP68, 11-16mm range, 10W switching capacity, 23x14.6x6mm, 500mA

€3.80

Sofort verfügbar · 6 Stück · 1-3 days

Reed sensor, reed contact, IP68, 11-16mm range, 10W switching capacity, 23x14.6x6mm, 500mA

Reed contact, small and robust Discover the high-precision reed contact, ideal for demanding applications in harsh environments. This sensor offers excellent water and dust resistance thanks to its IP68 certification, making it perfect for use in extreme conditions. With a switching capacity of 10W and a precise switching range of 11 to 16 mm, this sensor combines high functionality with reliable performance. Features at a glance Switching range: 11 to 16 mm - for precise switching in sensitive applications. High IP68 tightness class - ideal for applications in demanding environments. Maximum switching voltage of 110V - suitable for a wide range of applications. Technical data Sensor type: Reed contact Range: 11...16mm Switching capacity: 10W External dimensions: 23x14.6x6mm Connections: Cable Contact configuration: SPST-NO Switching current: 0.5A Switching voltage: max. 110V Tightness class: IP68 Scope of delivery Solenoid Sensor Notes Please note that the actual switching capacity may depend on the ambient conditions.

KMS-23-RE

€3.80

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

1 channel relay module with infrared remote control

€4.95

Sofort verfügbar · 7 Stück · 1-3 days

1 channel relay module with infrared remote control

With this 1-channel relay module, large loads can be switched very easily using infrared remote control. Technical data: 1-channel relay module Operating voltage: 9-13V DC via 2-pin Dupont header Equipped with heavy-duty relay (switching capacity AC: max. 250V / 10A ; DC: max. 30V / 10A DC) Relay type: changeover switch Relay contacts are accessible via screw terminals LED for displaying the relay status IR remote control range: approx. 8m Remote control uses UPD6122 chip and NED coding format Frequency IR radiation: 38 kHz User code of the remote control: OxOOFF Key Value: "ON"---40, "OFF"---19 Remote control uses CR2025 battery Relay module dimensions: approx. 50 x 20 x 18 mm Ø mounting holes: approx. 3 mm Remote control dimensions: approx. 116 x 42 x 8 mm

IRRELM-1

€4.95

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

1 pair 6mm² / 10m solar string cable incl. mounted T4 plug

€31.00

Sofort verfügbar · 2 Stück · 1-3 days

1 pair 6mm² / 10m solar string cable incl. mounted T4 plug

Note This item can only be ordered with 0% VAT in accordance with Section 12 (3) UStG when used in a photovoltaic system. In order for us to deliver the item with 0% VAT, we require confirmation that you will use this item for this purpose. To do this, we will send you a link within 30 minutes of your purchase, which you can use to send us the corresponding confirmation. The item can only be delivered within Germany. Connection cable for connecting the solar module to the generator connection box or inverter, T4 plug pre-assembled. The cables are made of high-quality TÜV-certified solar cable, UV, ozone and weather-resistant and halogen-free.Technical data Connections: MC4 plug Length: 10mCross-section: 6mm²

750-002-B

€31.00

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

10 segment LED bargraph display, 10 bars, 1x red / 3x yellow / 4x green / 1x blue

€0.75

Sofort verfügbar · 43 Stück · 1-3 days

10 segment LED bargraph display, 10 bars, 1x red / 3x yellow / 4x green / 1x blue

10-segment LED bargraph display The 10-segment LED bargraph display is a compact and efficient device, ideal for the precise visualisation of charge states and other measured values. With colour-coded segments, it enables instant status recognition, making it particularly useful for technical applications. The display is designed to be space-saving and energy-efficient, making it easy to integrate into various devices. Its reliability and user-friendly design make it an excellent choice for displaying important operating parameters. Features at a glance Ideal for charging displays: The colour separation and clear segmentation allow progress to be clearly visualised. Compact design: The compact dimensions of approx. 25 x 10 x 9 mm allow use in a wide range of applications. Number of segments: 12 Technical data: approx Dimensions: approx. 25 x 10 x 9 mm LED colours: 2x red 3x yellow 4x green 1x blue Power supply: Red LEDs: 1.95V Yellow LEDs: 2.0V Green LEDs: 2.85V Blue LED: 3.0V Scope of delivery 1x 10 segment LED bargraph display

LED-BAR-10B

€0.75

Sofort verfügbar · 43 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

10 x jumper, short version, open, RM 2.54mm, black

€1.00

Sofort verfügbar · 39 Stück · 1-3 days

12 segment linear LED bar / display, 8x green / 4x red

€0.90

Sofort verfügbar · 86 Stück · 1-3 days

12 segment linear LED bar / display, 8x green / 4x red

12-segment linear LED strip The 12-segment linear LED strip combines 8 green and 4 red LEDs to create a clear and aesthetically pleasing display, ideal for applications such as VU audiometers and charging indicators. With its compact size (33 x 14 x 7 mm) and low weight (8 g), it is ideal for installation in various devices. Features at a glance Flexible LED layout: The combination of green and red LEDs enables a dynamic display. Compact design: The small dimensions make it ideal for installation in various devices. Lightweight design: At just 8 g, it is particularly light and does not affect the overall weight of the end product. Technical specifications 2 mm pitch Dimensions: approx. 33 x 14 x 7 mm Weight: 8 g 12 LED segments 8 segments green 4 segments red Power supply: Red LEDs: 1.8 - 2.2V Green LEDs: 2.0 - 2.5V Other data Ideal for building VU audiometers and charging indicators thanks to the special arrangement of the LEDs Scope of delivery 1x 12 segment linear LED strip

LED-BAR-12P

€0.90

Sofort verfügbar · 86 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

1N4001 - Rectifier diode, THT, 50V, 1A, DO41

€0.08

Sofort verfügbar · 100+ Stück · 1-3 days

1N4001 - Rectifier diode, THT, 50V, 1A, DO41

1N4001 - Rectifier diode, THT, 50V, 1A, DO41 This rectifier diode is suitable for through-hole mounting (THT) and supports a maximum reverse voltage of 50V with a forward current of 1A. Thanks to its robust design in the DO41 housing and high performance with a maximum forward current of 5.4A, it is ideal for a wide range of applications in electronics. Features at a glanceHigh reliability: maximum forward current load of 5.4A and pulse current capacity of 30A.Energy efficiency: minimum forward voltage of only 1.1V reduces energy losses. Technical specifications Diode type: Rectifier Mounting: THT Maximum reverse voltage: 50V Forward current: 1A Forward current max.: 5.4A Semiconductor structure: single diode Max. pulse current: 30A Housing: DO41 Forward voltage max.: 1.1V Leakage current: 50µA Standby time: 1.5µs Other data Ideally suited for high-frequency applications and energy conversion Scope of delivery 1x 1N4001 rectifier diode

1N4001

€0.08

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

1N4148 - Switching diode, THT, 100V, 300mA, DO35

€0.04

Sofort verfügbar · 100+ Stück · 1-3 days

1N4148 - Switching diode, THT, 100V, 300mA, DO35

1N4148 - Switching diode, THT, 100V, 300mA, DO35 This switching diode is ideal for applications that require fast switching, such as rectification, signal switching and for protecting sensitive components by limiting or clipping voltages. The switching diode supports a fast standby time of 4ns and is ideal for use in a wide range of devices, from household appliances to complex communication equipment. Features at a glance Fast switching: Particularly suitable for applications requiring high switching speed. Versatile applications: Ideal for rectification, signal control and protection by voltage limiting. Compact housing: DO35 housing enables easy mounting in various designs. Technical data Diode type: Switching diode Mounting: THT Max. reverse voltage: 100V Forward current: 0.2A Forward current max.: 0.5A Semiconductor structure: single diode Semiconductor element characteristics: super fast switching Max. pulse current: 4A Forward voltage max.: 1V Power dissipation: 500mW Standby time: 4ns Other data Fast standby time and high efficiency in a compact form. Scope of delivery 1x 1N4148 switching diode

1N4148

€0.04

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

2 channel network relay module

€35.50

Sofort verfügbar · 2 Stück · 1-3 days

2 channel network relay module

With this 2-channel relay module, large loads can be easily switched via a network connection. Under Downloads we already offer a variety of control programmes for Windows in VBasic or Delphi as well as an Android app. Thanks to the additional source code offered, a controller can also be integrated into your own applications. Note: The module is delivered with the IP address 192.168.1.1 / Subnet: 255.255.255.0 / Gateway: 192.168.1.1 as standard. The IP can be customised as required using the "Config Utility" tool, see also the "SR-201 Network Relay Quick Start Guide" documentation. Technical data: Connections: LAN RJ45 connection 5.5x2.1mm hollow plug socket for power supply Screw terminal for power supply 8 pin pin header Equipped with heavy-duty relays (switching capacity AC: max. 250V / 10A ; DC: max. 30V / 10A DC) Up to 4 cards can be connected to each other via pin header, so 8 relays are available Power supply: 5-24V @ hollow plug socket, 9-24V @ screw terminal Power LED LEDs to indicate the relay status Dimensions: 70 x 50 mm

LANRELM-2

€35.50

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

28BYJ-48 Stepper motor 5V DC + ULN2003A driver board

€2.20

Artikel aktuell nicht lieferbar

Details

28BYJ-48 Stepper motor 5V DC + ULN2003A driver board

28BYJ-48 Stepper motor 5V DC + ULN2003A driver board This stepper motor with driver board ULN2003A can be used in various devices, including printers or machine tools. With an operating voltage of 5V and a resistance of 300 Ohm, this set enables efficient and reliable motion control, while the compact dimensions of the board and motor allow easy integration into existing systems and projects. Features at a glance High compatibility: Can be used in various devices, including printers or machine tools Compact dimensions: Easy integration into a wide variety of projects. Technical specifications Operating voltage: 5V Resistance: 300 Ohm Dimensions of the circuit board: 41 x 22 x 18 mm Dimensions of the stepper motor: 31 x 42 x 29 mm 2 mounting holes on the motor: 4mm Distance between the mounting holes: 32mm 5-pin cable length: 25 cm Scope of delivery 1x 28BYJ-48 stepper motor 5V DC 1x ULN2003A driver board

28BYJ-48

€2.20

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, blau, 1,2m

€2.70

Ab Hersteller · 55 Stück · 3-5 Tage

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, blau, 1,2m

Mit diesem 3-fach USB-Kabel, lassen sich bis zu 3 Geräte gleichzeitig aufladen. Wichtiger Hinweis: Je mehr Geräte an einem 3-fach USB-Kabel gleichzeitig geladen werden, umso geringer wird die maximale Ladeleistung pro Gerät. - Anschlüsse: USB-A Stecker auf USB-C / USB Micro-B / 8-Pin Stecker - keine Datenleitungen nur zum aufladen geeignet - Stecker: vergossen - Kontaktoberfläche: Pins vergoldet - Stecker Gehäuse: Metall (Alu) - Kabeltyp: Rundkabel - Kabelmantel: PVC - Material Außenmantel: Textilgewebe - Durchmesser Kabel (ca.): 3,3mm - Farbe: blau - Länge: 1,2m

14-50071

€2.70

Ab Hersteller · 55 Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, rot, 1,2m

€2.70

Sofort verfügbar · 9 Stück · 1-3 days

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, rot, 1,2m

14-50070

€2.70

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

3-pole slide switch for breadboards

€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

3-pole slide switch for breadboards

3-pole slide switch for breadboards This slide switch can be easily integrated into existing circuits built on breadboards. It is ideal for applications where a simple switching function is required and offers reliable performance. Features at a glance Easy integration: Perfect for breadboard circuits. Reliable switching function: ON-ON switching. RoHs compatible and lead-free. Technical Data Type: Slide switch Version: 1x UM, upright Switching function: ON-ON Number of pins: 3 Lead-free RoHs compatible Scope of delivery 1x 3-pole slide switch

BB-SWITCH-3P

€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

3.5" Display Shield for Arduino Uno / Mega

€19.50

Artikel aktuell nicht lieferbar

Details

3.5" Display Shield for Arduino Uno / Mega

This shield can be used to add a 3.5" display to an Arduino. Features 320x480 resolution Interface Display: 8-bit parallel bus Interface Micro SD: SPI LCD Controller: ILI9486 without touchscreen Display with LED backlight Compatible with: Arduino Uno, Arduino Leonardo, Arduino Mega Documentation and downloads http://www.lcdwiki.com/3.5inch_Arduino_Display-UNO#Reference_Materials optional driver on github

ARD-35LCD

€19.50

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

360° bendable HDMI adapter

€2.82

Sofort verfügbar · 4 Stück · 1-3 days

360° bendable HDMI adapter

HDMI adapter19-pin HDMI socket > HDMI A plugHDMI adapter with angled plugs. Ideal for connecting devices in hard-to-reach places, such as wall-mounted LCD/Plasma TVs.- Gold-plated contacts- Can be angled 360° freely

60757

€2.82

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

4-channel infrared receiver incl. remote control

€5.70

Artikel aktuell nicht lieferbar

Details

4-channel infrared receiver incl. remote control

This 4-channel infrared receiver can decode the infrared commands sent by the supplied remote control and outputs the corresponding high levels for the individual channels via the pin header. How it works By default, LOW levels are present on the pin header of the receiver module. If one of the channel buttons (CH 1-4) on the remote control is pressed, the corresponding output (OUT 1-4) changes from LOW to HIGH and the corresponding LED (H 1-4) on the receiver board lights up for as long as the channel button on the remote control is pressed. When the red power button on the remote control is pressed, all outputs on the receiver board change from LOW to HIGH and all LEDs light up as long as the button on the remote control is pressed. Technical data receiver board Operating voltage: 3-5V Connections via pin header (RM 2.54) VCC: Power supply input GND: Ground OUT1: Output channel 1 OUT2: Output channel 2 OUT3: Output channel 3 OUT4: Output channel 4 4 status LEDs for the individual outputs Dimensions: 38 x 29 mm 2 PCB holes for mounting Technical data remote control Operating voltage: 3V via lithium battery CR2025 Range: 5 - 8 metres Dimensions: 85.5 x 39.5 mm Scope of delivery Receiver board Infrared remote control incl. battery

IRRM-4

€5.70

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

4-way desktop socket strip with USB charging function (2x 1A) black

€17.10

Sofort verfügbar · 4 Stück · 1-3 days

4-way desktop socket strip with USB charging function (2x 1A) black

4-way aluminium desktop socket strip with USB charging function 2x 1000mA Mounting material included Sockets arranged at a 45° angle - so several plugs can easily be placed next to each other. with 1.5 m plastic sheathed cable H05VV-F 3G1.5 with illuminated on/off switch with earthing contact plug supply cable. Suitable for indoor use Technical data: 230 V / 16 A - max. 3,680 W

S60317

€17.10

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

4-way desktop socket strip with USB charging function (2x 1A) white

€14.90

Sofort verfügbar · 5 Stück · 1-3 days

Neu

4-way desktop socket strip with USB charging function (2x 1A) white

S60317-W

€14.90

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V

€1.90

Sofort verfügbar · 100+ Stück · 1-3 days

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V

With this set it is possible to switch 433Mhz devices such as radio-controlled sockets, e.g. with the Raspberry Pi. The modules have been tested under pilight and can be used for this purpose without any problems. Both modules can also be operated on a plug-in board (not included) thanks to the pin pitch of 2.54mm. Technical data transmitter / transmitter XY-FST Operating voltage: 3.5 - 12V DC Range: 20 - 200m (depending on the operating voltage) Operating mode: AM Transmission rate: 4KB / s Transmission power: 10mW Transmission frequency: 433Mhz Dimensions: 19 x 19mm Pin assignment: Data, VCC, ground (from left to right) Technical data receiver XY-MK-5V Operating voltage: 5V DC Receiving frequency: 433Mhz Sensitivity: -105dB Dimensions: 30 x 14mm Please note that we cannot guarantee the accuracy of this data! Scope of delivery: 1x 433Mhz XY-FST Transmitter 1x 433Mhz XY-MK-5V Receiver / Receiver

FS1000A

€1.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

5V 1 channel relay module with switch-on delay

€1.90

Sofort verfügbar · 19 Stück · 1-3 days

5V 1 channel relay module with switch-on delay

With this 1-channel relay module, large loads can be easily switched with 5V. A switch-on delay of up to 10 seconds can be set using a trimmer. All connections for controlling the relays are accessible via screw terminals. Technical data: 5V 1-channel relay module Adjustable delay via trimmer (approx. 1-10 seconds) Relay requires approx. 15-20mA for switching Equipped with heavy-duty relay (switching capacity AC: max. 250V / 10A ; DC: max. 30V / 10A DC) Relay type: changeover switch Contacts for controlling the relays are accessible via screw terminals Relay contacts are accessible via screw terminals LEDs for displaying the relay status Dimensions: 53 x 18 x 20 mm Ø mounting holes: approx. 3 mm

DELRELM-2

€1.90

Sofort verfügbar · 19 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

5V laser diode, ø6mm, with connection cable

€0.75

Artikel aktuell nicht lieferbar

Details

5V laser diode, ø6mm, with connection cable

5V laser diode, ø6mm, with connection cable The 5V laser diode with a diameter of 6mm and connection cable is ideal for a wide range of applications in electronic projects. With an operating voltage of 5V, it offers simple integration into existing systems. The connection cable enables an uncomplicated connection. The compact design and reliable performance make this laser diode an excellent choice for precise and efficient laser technology applications. Features at a glance Connection cable included Technical specifications Operating voltage: 5V Diameter: 6mm Wavelength: 650nm Power consumption: 5mA Light colour: red Scope of delivery 1x 5V laser diode with connection cable

LDI-650

€0.75

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Neu

6-way desktop socket strip with USB charging function (2x 1A) black

€18.41

Sofort verfügbar · 1 Stück · 1-3 days

Details

Neu

6-way desktop socket strip with USB charging function (2x 1A) black

6-way aluminium desktop socket strip with USB charging function 2x 1000mA Mounting material included Sockets arranged at a 45° angle - so several plugs can easily be placed next to each other. with 1.5 m plastic sheathed cable H05VV-F 3G1.5 with illuminated on/off switch with earthing contact plug supply cable. Suitable for indoor use Technical data: 230 V / 16 A - max. 3,680 W

S60318

€18.41

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Details

ACS712 current sensor module 20A

€2.85

Sofort verfügbar · 25 Stück · 1-3 days

ACS712 current sensor module 20A

Current sensor module based on the IC ACS712. Enables the measurement of current up to 20A and analogue linear output. The module can be easily integrated into microcontroller circuits. Areas of application Chargers Battery current monitoring Status display of devices Monitoring of electrical devices Technical specifications: Chipset: ACS712ELC-20A Operating voltage: 5V DC Operating LED Measuring range up to 20A / DC Analogue output: 66mV/A no current flows Output voltage VCC/2 Measurement input connection via screw terminals Measurement output connection via pin header Dimensions: approx. 27.5 x 11.6 x 14 mm

ACS712-20A

€2.85

Sofort verfügbar · 25 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

ACS712 current sensor module 30A

€2.85

Sofort verfügbar · 34 Stück · 1-3 days

ACS712 current sensor module 30A

Current sensor module based on the IC ACS712. Enables the measurement of current up to 30A and analogue linear output. The module can be easily integrated into microcontroller circuits. Areas of application Chargers Battery current monitoring Status display of devices Monitoring of electrical devices Technical specifications: Chipset: ACS712ELC-20A Operating voltage: 5V DC Operating LED Measuring range up to 30A / DC Analogue output: 66mV/A no current flows Output voltage VCC/2 Measurement input connection via screw terminals Measurement output connection via pin header Dimensions: approx. 27.5 x 11.6 x 14 mm

ACS712-30A

€2.85

Sofort verfügbar · 34 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

ACS712 Current sensor module 5A

€2.85

Sofort verfügbar · 3 Stück · 1-3 days

ACS712 Current sensor module 5A

Current sensor module based on the IC ACS712. Enables the measurement of current up to 5A and analogue linear output. The module can be easily integrated into microcontroller circuits. Areas of application Chargers Battery current monitoring Status display of devices Monitoring of electrical devices Technical specifications: Chipset: ACS712ELC-20A Operating voltage: 5V DC Operating LED Measuring range up to 5A / DC Analogue output: 66mV/A no current flows Output voltage VCC/2 Measurement input connection via screw terminals Measurement output connection via pin header Dimensions: approx. 27.5 x 11.6 x 14 mm

ACS712-5A

€2.85

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Activated carbon filter for smoke absorber

€1.90

Sofort verfügbar · 11 Stück · 1-3 days

Adapter 1x 6.3mm stereo jack plug - 2x 6.3mm stereo jack socket, black, 0.20m

€1.65

Sofort verfügbar · 1 Stück · 1-3 days

Adapter 3.5mm stereo jack plug - 6.3mm stereo jack socket, black, 0.20m

€0.78

Artikel aktuell nicht lieferbar

Details

Adapter cable 6.35mm stereo jack plug - 2x RCA plug 1.5m

€0.93

Ab Hersteller · 100+ Stück · 3-5 Tage

Details

Adapter cable 6.35mm stereo jack plug - 2x RCA plug 1.5m

Brief description: This jack cable can be used, for example, when connecting the sound card to an amplifier.Specification: - Connections: 1 x 6.35 mm3-pin jack plug > 2 x RCA plugs (red, white)- Wire cross-section: 28 AWG- Length incl. connections approx. 1.5 m - Colour: black System requirements - One free 6.35 mm jack connection red, white - Two free RCA sockets red, white Pack Length incl. connections: approx. 1.5 m- Colour: blackSystem requirements: - One free 6.35 mm jack connection- Two free RCA sockets red and whitePackage contents: - Audio jack to RCA cable

HP30511

€0.93

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adapter cable 6.35mm stereo jack plug - 2x RCA socket 28cm

€0.80

Ab Hersteller · 100+ Stück · 3-5 Tage

Details

Adapter cable 6.35mm stereo jack plug - 2x RCA socket 28cm

Brief description: This jack cable can be used, for example, when connecting the sound card to an amplifier.Specification: - Connections: 1 x 6.35 mm 3-pin jack plug > 2 x RCA socket (red, white)- Wire cross-section: 28 AWG- Length incl. connections approx. 28 cm - Colour: black System requirements - One free 6.35 mm jack connection Pack contents Connections: approx. 28 cm- Colour: blackSystem requirements: - One free 6.35 mm jack connectionPackage contents: - Audio jack to RCA cable

HP30461

€0.80

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adapter cable HDMI type A plug DVI-D 24+1 plug black

Varianten ab €2.49

€2.56

Sofort verfügbar · 11 Stück · 1-3 days

Adapter cable HDMI type A plug DVI-D 24+1 plug black

- Connectors: HDMI plug type A - DVI plug 24+1- Plug: moulded- Shielding construction: 1x0.25mm, braiding and foil- Cable construction: AWG 30 (length 1 - 2 m) / AWG 28 (length 3 - 10 m)- Core material: copper- Plug material: CuZnNi- Contact surface: gold-plated- Plug colour: black- Cable colour: black- Transmission rate: max. 7.44 Gbit/s

77481

Varianten ab €2.49

€2.56

Sofort verfügbar · 11 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adapter cable HDMI type A plug DVI-D 24+1 plug black

Varianten ab €2.49

€2.90

Ab Hersteller · 100+ Stück · 3-5 Tage

Adapter cable HDMI type A plug DVI-D 24+1 plug black

77482

Varianten ab €2.49

€2.90

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

Adapter cable HDMI type A plug DVI-D 24+1 plug black

Varianten ab €2.49

€3.85

Ab Hersteller · 100+ Stück · 3-5 Tage

Details

Adapter cable HDMI type A plug DVI-D 24+1 plug black

77483

Varianten ab €2.49

€3.85

Ab Hersteller · 100+ Stück · 3-5 Tage

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adapter cable HDMI type A plug DVI-D 24+1 plug black

Varianten ab €2.49

€5.31

Sofort verfügbar · 1 Stück · 1-3 days

Adapter cable HDMI type A plug DVI-D 24+1 plug black

77485

Varianten ab €2.49

€5.31

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adapter cable HDMI type A plug DVI-D 24+1 plug black

Varianten ab €2.49

€7.87 €8.90 (11.57% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

Adapter cable HDMI type A plug DVI-D 24+1 plug black

77487

Varianten ab €2.49

€7.87 €8.90 (11.57% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Kunden kauften auch

Raspberry Pi Zero 2 WH

Der Raspberry Pi Zero 2 WH ist der langersehnte Nachfolger des beliebten Raspberry Zero W – mit vielen Upgrades, aber im gleichen Formfaktor! Er verfügt über eine Quad-Core 64-Bit Arm Cortex-A53 CPU, die mit 1GHz getaktet ist. Das Herzstück des Boards bildet ein Raspberry Pi RP3A0 System-in-Package (SiP), das einen Broadcom BCM2710A1 Chip mit 512 MB LPDDR2 SDRAM integriert. Der aktualisierte Prozessor versorgt den Pi mit 40 % mehr Single-Thread-Leistung und fünfmal mehr Multi-Thread-Leistung als der ursprüngliche Single-Core-Raspberry Pi Zero. Der Raspberry Pi Zero 2 W bietet 2.4GHz 802.11 b/g/n Wireless LAN und Bluetooth 4.2, zusammen mit Unterstützung für Bluetooth Low Energy (BLE) und modularer Konformitätszertifizierung. Das Board verfügt über einen microSD-Kartensteckplatz, einen CSI-2-Kameraanschluss, einen USB On-The-Go (OTG)-Anschluss und eine freie Fläche für einen HAT-kompatiblen 40-poligen GPIO-Anschluss. Die Stromversorgung erfolgt über eine Micro-USB-Buchse. Die Videoausgabe erfolgt über einen Mini-HDMI-Anschluss. Ein Composite-Video-Ausgang kann bei Bedarf einfach über Testpunkte zur Verfügung gestellt werden. Da der Raspberry Pi Zero 2 W die gleiche Größe und Anschlusspositionierung wie vorherige Zero-Modelle hat, können vorhandene Gehäuse weiterhin genutzt werden. Diese WH (H=Header) Variante verfügt über eine vorbestückte GPIO Stiftleiste. Technische Daten BCM 2710A1 64-bit ARM Cortex-A53 Quad-Core CPU @ 1GHz 512MB RAM On-board Wireless LAN - 2.4 GHz 802.11 b/g/n On-board Bluetooth 4.2 / Bluetooth Low-energy (BLE) micro-SD Slot mini-HDMI Typ C Anschluss 1x micro-B USB für Daten 1x micro-B USB für Stromversorgung CSI Camera Connector (benötigt ein separat erhältliches Adapterkabel) Composite-Video- und Reset-Pins über Lötpunkte Unbestückter 40-Pin GPIO Connector Kompatibel mit vorhanden pHAT/HAT Add-On Boards Abmessungen: 65 x 30 x 5mm

€20.90

Artikel aktuell nicht lieferbar

Details

Raspberry Pi Zero 2 WH

RPIZ-2WH

€20.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

SanDisk Extreme micro SDHC A1 UHS-I U3 memory card + adapter 32GB

Now you can record even more fast action videos in Full HD or 4K Ultra HD with your Android smartphone, system camera, drone or GoPro action cam. The SanDisk Extreme microSDHC and microSDXC UHS-I memory cards are designed for extreme durability in even the harshest environments. With extreme speeds, you can capture detailed footage of your adventures and reduce latency when transferring video. All SanDisk products meet the highest possible standards and undergo rigorous testing. That's why you can always rely on the outstanding quality, performance and reliability of SanDisk products.Technical specifications:General specificationsProduct typeFlash memory cardStorage capacity32 GBCompatibilityNot specificMemorySD Speed ClassA1 / Video Class V30 / UHS-I U3Form factormicroSDHC UHS-I memory cardIncluded memory adaptermicroSDHC/SD adapterDimensions and weightWidth10.92 mmDepth14.99 mmThickness1.02 mmWeight4.54 g

€7.80

Sofort verfügbar · 100+ Stück · 1-3 days

SanDisk Extreme micro SDHC A1 UHS-I U3 memory card + adapter 32GB

619659155827

€7.80

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers

Raspberry Pi Pico WH is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.The Raspberry Pi Pico W is designed as a low-cost yet flexible development platform for the RP2040 with a 2.4 GHz wireless interface and the following key features:RP2040 microcontroller with 2 MB flash memoryIntegrated 2.4 GHz single-band wireless interface (802.11n)Micro USB-B connector for power and data (and for reprogramming the flash)40-pin 21mmx51mm 'DIP' PCB, 1mm thick, with 0.1" through-holes, also with edge decorations26 multifunctional 3.3 V general purpose inputs and outputs (GPIO) 23 GPIOs are purely digital, three of which are also ADC-capable Can be surface-mounted as a module3-pin ARM Serial Wire Debug Port (SWD)Simple but highly flexible power supply architectureVarious options for easy power supply via micro USB, external power supplies or batteries - High quality, low cost, high availabilityComprehensive SDK, software examples and documentation3-pin JTAG connector40-pin pre-soldered pin headerDetailed information about the RP2040 microcontroller can be found in the RP2040 datasheet. The most important features are:Dual-core Cortex M0+ with up to 133MHzOn-chip PLL enables variable core frequency264kByte multi-bank high performance SRAMExternal Quad SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cacheHigh-performance full crossbar bus structureOn-board USB1.1 (device or host)30 multifunction I/O (four can be used for ADC)1.8-3.3 V I/O voltage12-bit 500ksps analogue-to-digital converter (ADC)Various digital peripherals2 x UART, 2 × I2C, 2 × SPI, 16 x PWM channels1 x timer with 4 alarms, 1 x real-time clock2 x programmable I/O blocks (PIO), 8 state machines in totalFlexible, user-programmable high-speed I/OCan emulate interfaces such as SD card and VGAFor more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.

€7.20

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers

RPI-PICO-WH

€7.20

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

seeed Grove - Breadboard

seeed Grove - Breadboard The Grove breadboard is 35*47*8.5mm in size and has metal strips under the board that connect the holes on the top. A Grove connector on the board allows you to build your own Grove module and take your creativity to the next level. This breadboard is unique because it is not a module, shield or hat, but a breadboard with additional functions. Features at a glance On-board Grove connector for plug-and-play connectivity On-board Dupont connector for easy prototyping On-board resettable fuse (PTC) for protection: 500mA max. current On-board power LED to indicate operating status Standard Grove size: 40*60mm Combination of breadboard and PCB board Technical specifications Size: 35*47*8.5mm Scope of delivery 1x seeed Grove breadboard 1x Grove connection cable 4-pin male header

€4.10

Sofort verfügbar · 28 Stück · 1-3 days

seeed Grove - Breadboard

SE-103020232

€4.10

Sofort verfügbar · 28 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Breadboard with 830 contacts

€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Breadboard with 830 contacts

BB-830P

€1.90

Sofort verfügbar · 57 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

RGB LED matrix 8x8 with 5mm LEDs - common anode

8x8 RGB LED matrix with common anode5mm LEDsEdge length: 60 mm

€4.40

Sofort verfügbar · 8 Stück · 1-3 days

7 segment LED display module, I2C interface, TM1637, 14mm, red

€1.40

Sofort verfügbar · 99 Stück · 1-3 days

7 segment LED display module, I2C interface, TM1637, 14mm, red

TM1637-4DR

€1.40

Sofort verfügbar · 99 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

HC-SR501 PIR Sensor - Infrared motion detector

€2.15

Sofort verfügbar · 100+ Stück · 1-3 days

HC-SR501 PIR Sensor - Infrared motion detector

HC-SR501

€2.15

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

LED traffic light module with 3x 8mm LED (red, yellow, green), 5V

This traffic light-shaped LED module is ideal for anyone who wants to gain initial experience in controlling LEDs with a developer board such as Raspberry Pi or Arduino. The three 8mm LEDs can be controlled individually via pins. The integrated resistors ensure safe operation directly at 5V.Features: - Operating voltage: 5V DC- LED size: 8mm- LED colours: red, yellow, green- Dimensions: approx. 56 x 21 x 11mm- 3mm mounting holes

€1.10

Sofort verfügbar · 50 Stück · 1-3 days

LED traffic light module with 3x 8mm LED (red, yellow, green), 5V

LEDM-TRAF

€1.10

Sofort verfügbar · 50 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery clip for 9V blocks, I-shape, plastic housing

Goobay 1x 9 V block battery cliploose cable ends, water-repellentThe Goobay 9 V battery connector is water-repellent and made of durable material, which guarantees a long service life for the battery clip.The push-button connection can be connected to a 9 V block battery or a battery holder.The battery clip is ideal for connecting LEDs to a 9 V block.The battery connection cable has loose cable ends and an I-shape.The positive pole of the battery connection is labelled red.Technical dataConnection, type: loose cable endsSpecial feature: water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 14.5 mmColour: blackLength: 28 mmsuitable battery size: 9 V blocksuitable IEC battery types: 6F22, 6HR61, 6LR61/6LP3146

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Battery clip for 9V blocks, I-shape, plastic housing

12483

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit Height Metal Caster Bearing Wheel, steel ball bearing, 15.7mm wheel diameter, 20mm high

20mm steel ball roller bearing A durable and smooth-gliding steel ball roller bearing, ideal for robust applications. Perfectly sized for surprisingly smooth movement, it easily attaches to any chassis with two screw mounts. Note that no mounting hardware is included; use 4-40 or M3 screws to mount as desired. Features at a glance Easy to mount: Two screw mounts allow for easy attachment to any chassis. Fluid motion: Provides a surprisingly smooth and fluid rolling motion. Versatile compatibility: Fits perfectly with Lila aluminium chassis for TT engines, but can be used for any application where 20mm height is required. Technical data Wheel diameter: 15.7mm Overall height: 20mm Diameter of the fixed hole (below the roller bearing): 3.1mm Mounting hole diameter: 4mm Distance between the mounting holes: 40mm Total weight: 19.7g Scope of delivery 1x 20mm steel ball roller bearing (mounting materials not included) Notes Fastening materials are not included; use 4-40 or M3 screws of your choice.

€2.15

Sofort verfügbar · 2 Stück · 1-3 days

Adafruit Height Metal Caster Bearing Wheel, steel ball bearing, 15.7mm wheel diameter, 20mm high

ADA3948

€2.15

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten