Garmin LIDAR-Lite v3, up to 40m range, 1000Hz sampling rate, I2C/PWM, 5V DC

On-Off Key Lock Switch - 12mm Diameter Simple, effective and compact key switches that require a 12mm hole in the mounting plate. The key switches the two contacts on when turned to the green point and off when turned to the red point. The key can be removed in both positions, ideal as an on-off switch. Not suitable for high-security applications as all switches are supplied with the same keys, but versatile for IoT projects with a certain fun factor, or a low physical security measure, for example to start/stop automation in the smart home area in conjunction with a microcontroller such as the ESP32, or to start a PC in conjunction with an additional toggle switch such as an aircraft. Features at a glance Mechanical key switch 12mm hole required Key can be removed in both positions Green dot: contacts connected Red dot: contacts disconnected Technical Data Bore diameter: 12mm (0.5") Other data Not suitable for high security applications All key switches are supplied with the same keys Scope of delivery 1x On-Off Key Lock Switch 2x associated key Link to Product documentation

DFRobot Amphibious Horizontal Submersible Pump Use this amphibious micro submersible pump for small fountains, automatic water changers or DIY watering projects for plants! The pump operates at 3-6V and is characterised by low noise, high efficiency and easy cleaning. With an IP68 waterproof rating, it can be fully submerged provided the water is higher than the pump. Alternatively, water pipes can be connected to the inlet and outlet of the pump to move water from one place to another. Features at a glance Low noise and high efficiency for various water projects. Easy cleaning and IP68 watertightness enable versatile applications. Technical specifications Power supply: DC 3-6V Current: 150~370mA Pump head: 25-45cm Flow rate: 80-100L/H Power: 0.4~2W Water inlet and outlet: 5mm/0.20 inch Other data Water level must be higher than the pump for underwater operation. Scope of delivery 1x Amphibious Horizontal Submersible Pump 1x hose 1m

ESP32-S3 development board with 1.28 inch IPS round LCD The ESP32-S3-LCD-1.28 development board from Waveshare is a versatile and cost-effective microcontroller board, ideal for IoT projects. It features a 1.28-inch LCD, integrated lithium battery charging chip and a precise IMU six-axis sensor. At its heart is the ESP32-S3R2 SoC, which offers low-power Wi-Fi and BLE5.0 and has ample memory with 16MB Flash and 2MB PSRAM.The board supports advanced security features such as hardware encryption accelerators and digital signatures, making it secure and trustworthy for use in smart homes and other sensitive IoT applications. Its low-power modes also make it ideal for mobile and wearable applications, enabling the development of flexible and energy-efficient IoT devices. Features at a glance Compact design with a powerful 32-bit LX7 dual-core processor and GC9A01 display driver chip. Integrated round IPS LCD with 240x240 resolution and 65K colours. Versatile connectivity through WiFi/Bluetooth, supported by an integrated ceramic antenna. Compatibility Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE) with onboard antenna. Type-C connector for modern and easy use. Technical specifications Processor: ESP32-S3R2 SoC with WiFi and Bluetooth, up to 240MHz operating frequency, onboard 2MB PSRAM Memory: W25Q128JVSIQ 16MB NOR flash Sensors: QMI8658 6-axis IMU (3-axis gyroscope and 3-axis accelerometer) Power management: ME6217C33M5G 800mA output, low dropout, high rejection rate Charge management: ETA6096 high-efficiency lithium battery charge manager USB to UART: CH343P chip for USB to UART communication Battery connector: MX1.25 2P connector for 3.7V lithium battery, supports charging and discharging Antenna: 2.4GHz ceramic antenna GPIO pins: 1.27mm pitch headers, customisation of multiple GPIO pins Other data Onboard 3.7V lithium battery charge/discharge connector and GPIO header Flexible clock support and independent module power supply settings Integrated USB serial port Full-speed controller, configurable GPIO pins Scope of delivery 1x ESP32-S3-LCD-1.28 Development resources Wiki: ESP32-S3-LCD-1.28

Die PCIe M.2 SSD MTE400S von Transcend verfügt über einen kompakten Formfaktor und hochwertigen 3D-NAND-Flash, der die Aufrüstung von Ultrabooks, leichten Notebooks, Tablets und Handheld-Gaming-PCs erleichtert. Sie wurde mit mehreren Firmware-Optimierungstechnologien entwickelt, darunter SLC-Caching und LDPC ECC-Mechanismus, die die Zuverlässigkeit des Speichers verbessern und die Lebensdauer des Laufwerks verlängern. Die MTE400S ist eine hervorragende Wahl, um die Leistung moderner Arbeitsplattformen zu steigern.Technische DatenAllgemeinGerätetypSolid State Drive - internKapazität512 GBNAND-Flash-Speichertyp3D triple-level cell (TLC)FormfaktorM.2 2242SchnittstellePCIe 3.0 x4 (NVMe)MerkmaleAdvanced Garbage Collection, DRAM-Cache, LDPC Fehlerkorrektur, 3D NAND Technology, RAID Engine, S.M.A.R.T.Breite22 mmTiefe42 mmHöhe2.23 mmGewicht5 gLeistungLaufwerkaufzeichnungen pro Tag0.21SSD-Leistung200 TBInterner Datendurchsatz2000 MBps (lesen)/ 900 MBps (Schreiben)4 KB Random Read53000 IOPS4 KB Random Write235000 IOPSZuverlässigkeitMTBF2,000,000 StundenErweiterung und KonnektivitätSchnittstellen1 x PCI Express 3.0 x4 (NVMe) - M.2 CardKompatibles SchaltfeldM.2 2242Software & SystemanforderungenSoftware inbegriffenTranscend SSD ScopeErforderliches BetriebssystemLinux Kernel 2.6.31 oder höher, Microsoft Windows 7 oder höherUmgebungsbedingungenMin Betriebstemperatur0 °CMax. Betriebstemperatur70 °C

KKSB Raspberry Pi 5 Gehäuse - Platz für HATs, Erweiterungsplatinen, Kühler und NVMe HATs Entwickelt, um die Leistung und Vielseitigkeit des Raspberry Pi 5 zu maximieren, kombiniert dieses KKSB-Gehäuse hochwertiges sandgestrahltes eloxiertes Aluminium mit einem pulverbeschichteten Stahlrahmen, um sowohl Robustheit als auch eine ansprechende Ästhetik zu bieten. Es unterstützt eine umfangreiche Palette von HATs, Erweiterungskarten und Kühlern, einschließlich des offiziellen Raspberry Pi Kühlers und NVMe HATs, und ist so konzipiert, dass es eine einfache Installation und Anpassung ermöglicht. Die innovative Bauweise mit abnehmbarem Deckel und modifizierbaren Seitenwänden bietet außergewöhnliche Flexibilität für Ihre Projekte und sorgt für optimale Kühlung und Leistung Ihres Raspberry Pi 5. Merkmale im Überblick Kompatibilität mit verschiedenen HATs: Unterstützt die meisten HATs, einschließlich NVMe HATs, und bietet vielfältige Erweiterungsmöglichkeiten. Entfernbarer Deckel: Vereinfacht das Einrichten des Kühlers und die Installation der HATs ohne Platzprobleme. Externer Startknopf: Ermöglicht das einfache Ein- und Ausschalten des Raspberry Pi ohne das Gehäuse öffnen zu müssen. Technische Daten Kompatibles SBC: Raspberry Pi 5 (nicht enthalten) Kompatibilität: Platz für Raspberry Pi 5 Erweiterungsplatinen, HATs, offizieller Raspberry Pi 5 Kühler (oder anderen flachen Kühler mit passenden Abmessungen), NVMe HATs und KKSB Kamerahalter (Das Zubehör ist NICHT enthalten) Material: Sandgestrahltes eloxiertes Aluminiumgehäuse mit pulverbeschichtetem Stahlrahmen Integrierter Startknopf, lange Distanzstücke und stapelbarer Header inklusive 18mm und 20mm Distanzstücke: Ermöglichen die Montage von HATs mit langen und kurzen GPIO-Headern. Zugang für ein 40 GPIO Kabel an der Seite: Vereinfacht die Konnektivität mit anderen Geräten und Peripheriegeräten. Sonstige Daten Kompatibilität mit dem offiziellen Raspberry Pi Kühler: Sorgt für eine effiziente Kühlung für optimale Leistung und Zuverlässigkeit. Ventilationsschlitze: Verbesserte Wärmeableitung für optimale Leistung. Gewindebohrungen kompatibel mit dem KKSB Kamerahalter und zwei Schlüssellöcher an der Unterseite für die Wandmontage bieten vielseitige Montageoptionen. Anwendungsfälle: Heimautomatisierungssysteme, Medienzentren, IoT-Gateways, Bildungsprojekte und tragbare Arbeitsstationen Lieferumfang KKSB Gehäuse für Raspberry Pi 5 Stapelbarer Header Distanzstücke Gummifüße Hinweise Raspberry Pi 5, Erweiterungsplatinen, Kühler, HATs, Kamerahalter und Elektronik sind NICHT enthalten.

Dieses robuste Aluminiumgehäuse für den Raspberry Pi 5 bietet eine zuverlässige Lösung für den Dauerbetrieb. Mit seinem stabilen Aufbau durch Verschraubung gewährleistet es einen optimalen Temperaturausgleich. Dank der vier Stempel, die mittels Wärmeleitpads alle relevanten IC-Bausteine berühren, wird die Hitze effizient abgeleitet. Eigenschaften Vollständig aus Aluminium gefertigt Stabiler Aufbau durch Verschraubung 4 Stempel berühren mittels Wäremleitpads alle relevanten IC-Bausteine und nehmen somit die Hitze auf Power Button bleibt mit mitgeliefertem Adapter weiterhin bedienbar Ausschließlich passend für Raspberry Pi 5 Lieferumfang: Gehäuse, Schrauben, Wäremleitpads, Adapter für Power-Button, Innensechskantschlüssel Abmessungen: ca. 90 x 64 x 32 mm Farbe: silber Lieferung ohne Raspberry Pi

NVMe Base für Raspberry Pi 5, NVMe Base Fügen Sie Ihrem Raspberry Pi 5 superschnellen Speicher hinzu, der blitzschnelle Boots, NAS-Nutzung und flinke Anwendungen ermöglicht! NVMe Base ist eine PCIe-Erweiterungsplatine für den Raspberry Pi 5. Bestücken Sie sie einfach mit einer M-Key NVMe SSD (Unterstützung für 2230 bis 2280 Größen) und montieren Sie sie unter Ihrem Pi für eine kompakte und schnelle Speicherlösung - sie kommt sogar mit Gummifüßen! Merkmale im Überblick Perfekte Lösung, um Ihren Raspberry Pi 5 in einen Dateiserver, Medienzentrum, Reverse-Proxy usw. zu verwandeln. Unterstützt große Mengen an schnellem Speicher, besonders nützlich bei IOPS-intensiven Workloads. NVMe Base folgt den neuen "PIP"-Designrichtlinien von Raspberry Pi, was eine einfache Verwendung und langfristige Unterstützung durch Updates des Raspberry Pi OS gewährleistet. Technische Daten Kit beinhaltet: NVMe Base PCB mit M.2-Slot (M-Key), 'PCIe Pipe' Flachbandkabel, 4x Gummifüße, M2 Schraube und 2x Muttern zur SSD-Montierung, 4x 7mm M2.5 Distanzbolzen zur Basismontierung, 8x kurze M2.5 Schrauben zur Basismontierung, 4x lange M2.5 Schrauben zur 'Durchgangs'-Montierung mit einem HAT. Maximale Geschwindigkeit: 1700MB/s Lesen, 1600MB/s Schreiben. Maximale IOPS für zufällige 4k: 350k Lesen/400k Schreiben IOPS. MTBF: 1,5 Millionen Stunden. Abmessungen: 22.15 x 2.23 x 80.15 mm. Lieferumfang 1x NVMe Base für Raspberry Pi 5 Weiteres Zubehör wie im Kit beschrieben

IMX219-160IR camera This IMX219-160IR camera is suitable for the Jetson Nano. It has 8 megapixels, infrared night vision and a 160° field of view. Features Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX Supports night vision in combination with infrared LEDs 8 megapixel Sensor: IMX219 Resolution: 3280 × 2464 Lens specifications CMOS size: 1/4 inch Aperture (F): 2.35 Focal length: 3.15mm Viewing angle (diagonal): 160 degrees Distortion: <14.3% 4 screw holes For mounting Provides 3.3V output power Supports the connection of infrared LED and/or fill-in LED Dimensions: 25mm × 24mm Application areas Applications Combined with the Jetson Nano AI computer, this camera is suitable for AI projects such as: Face recognition Recognition of road markings Licence plate recognition Scope of delivery IMX219-160IR camera Wiki: www.waveshare.com/wiki/IMX219-160IR_Camera

Seeed Grove - Dual Button Grove - Dual Button is a module with two buttons that makes it possible to control two separate signal channels with just one Grove module. It contains four different coloured button caps that can be combined as required. The compact design with two buttons in one housing reduces the amount of cabling and simplifies the setup in projects. It is controlled via digital GPIO pins, whereby a pressed button generates a LOW signal and an unpressed button permanently supplies a HIGH signal. The standardised Grove connection means the module is ready for immediate use and can be seamlessly integrated into existing Grove environments. Typical applications include function keys, buttons to control counters, light switches, pet feeding systems and other interactive devices in DIY or prototyping applications. The small size and simple digital control enable versatile use in compact electronic projects. The module is suitable for use in DIY projects, in the development of interactive control systems or in the maker scene. It can be used in combination with microcontrollers such as the Arduino or the Raspberry Pi. Features at a glance Two digital buttons in one module Digital control via GPIO Compatibility with Arduino Raspberry Pi (via Grove Base HAT) Technical specifications Operating voltage: 3V-5V Interface: Grove Dimensions: 20mm × 40mm Other data Battery not included Scope of delivery 1x Grove - Dual Button 4x keycaps 1x Grove cable Links Preface - Getting Started Introduction to Grove Eagle file Circuit diagram PDF

Overview Metal housing for Jetson Nano A02 and B01 Developer Kit Dust-repellent, clever design easy access to the connections allows mounting of a fan with camera holder, RESET and POWER buttons Scope of delivery Housing Camera mount Reset and power button 40PIN expansion board Micro SD adapter Spanner Screwdriver Screw package Note: Not suitable for the NVIDA Jetson board with 2GB RAM!

Raspberry Pi 5 with 8 GB RAM This advanced model impresses with two microHDMI ports that enable outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. The Raspberry Pi 5 is equipped with a modern USB-C port for the power supply. The dual-band WLAN, which supports both 2.4 GHz and 5 GHz, and Bluetooth 5/BLE ensure outstanding networking capabilities. The Ethernet connection enables rapid data transfers at speeds of up to 1000 Mb/s. The Pi 5 also offers the option of being supplied with power via PoE (Power over Ethernet). All other specifications and features are consistent with those of the Raspberry Pi 4, ensuring continuity and reliability in the Raspberry Pi range. Accessories for the Raspberry Pi 5 To utilise the full potential of your Raspberry Pi 5, we recommend the following accessories: A microSD card, ideally with an operating system already installed. A stable power supply via USB-C, preferably 5V / 5A DC or 27W. A monitor and a suitable HDMI cable. Of course, a keyboard and mouse for easy operation. Product features Raspberry Pi 5 2.4GHz Quad-Core 64-bit Arm Cortex-A76 CPU: The power that will amaze you. VideoCore VII GPU: Enjoy state-of-the-art graphics with support for OpenGL ES 3.1 and Vulkan 1.2. Dual 4Kp60 HDMI output: For razor-sharp displays with HDR support. Up to 8GB LPDDR4X-4267 SDRAM: So that you always have enough RAM available. Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE: For the best connections at all times. The Raspberry Pi 5 offers an impressive variety of connection options 2 × USB 3.0 and 2 × USB 2.0 ports: For all your peripheral devices Gigabit Ethernet: Fast and stable network connections, with up to 1000Mb/s Dual 4Kp60 HDMI: For simultaneous, brilliant screen output And many more, from microSD card slots to GPIO headers 2 × 4-lane MIPI camera / display port PCIe2.0 for future HATs 40 GPIO pin headers: to realise your projects Advantages of the Raspberry Pi 5 The Raspberry Pi 5 is not just another mini-computer. It represents the future: a powerhouse in a compact design that is ready for a wide range of applications - whether for creative projects at home or demanding industrial applications. Can you imagine an everyday life where you are not just a consumer, but also a creator? Where you design technology according to your wishes? The Raspberry Pi 5 takes you there! Advantages of the Raspberry Pi 5 compared to the Raspberry Pi 4 What Raspberry Pi 4 Mod B Raspberry Pi 5 Processor Quad-Core Cortex A72 Quad-Core Cortex-A76 Architecture ARM 64-bit ARM 64-bit Clock frequency 1.5 GHz 2.4 GHz RAM 1GB, 2GB, 4GB, 8GB LPDDR4 2GB, 4GB and 8GB LPDDR4X *) WiFi 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/a Dual-band 802.11ac Bluetooth 5.0, BLE 5.0, BLE USB 2 x USB2.0 2 x USB3.0 2 x USB2.0 2 x USB3.0 with 5Gbps each Decoder H.265 (4Kp60 decode) H.264 (1080p60 decode, 1080p30 encode) OpenGL ES, 3.0 graphics 4Kp60 HECV OpenGL ES 3.1, Vulkan 1.2 LAN Gigabit Gigabit with PoE+ support Input power 5V / 3A DC 5V / 5A DC GPIO 40-pin header 40-pin header New features - RealTimeClock PCIe 2.0 Integrated power button Fan connector Operating system for Raspberry Pi 5 With the Raspberry Pi 5 you have the choice: The official Raspberry Pi OS is available, but other Linux distributions and even Windows 10 ARM64 can also be brought to life on this machine Important notes for the Raspberry Pi 5 Your Raspberry Pi 5 is a powerhouse that should be treated with care. Keep it away from moisture and avoid extremely high or low temperatures. The future has only just begun. With the Raspberry Pi 5, you are perfectly equipped to be at the forefront. Experience the technology you've always wanted! FAQ What is the main difference between the Raspberry Pi 5 and the Raspberry Pi 4? The Raspberry Pi 5 offers improved CPU performance, enhanced graphics options, more RAM and a variety of improved connectivity options and long-awaited features such as RTC or PCIe 2.0, compared to the Raspberry Pi 4. Does the Raspberry Pi 5 support 4K resolution? Yes, the Raspberry Pi 5 supports dual 4K displays via its HDMI ports. What operating systems are compatible with the Raspberry Pi 5? The Raspberry Pi 5 supports a variety of operating systems, including various Linux distributions and Windows IoT Core How much RAM is available in the Raspberry Pi 5? Models with 2 GB, 4 GB and 8 GB RAM are currently available. Does the Raspberry Pi 5 offer support for PoE (Power over Ethernet)? Yes, with an additional PoE+ HAT, the Raspberry Pi 5 can be supplied with power via Ethernet. Separate hardware that supports this in your network is required. What connections does the Raspberry Pi 5 offer? The Raspberry Pi 5 has USB 3.0 and 2.0 ports, Gigabit Ethernet, dual 4K HDMI, microSD card slot, 2 MIPI camera / display ports, PCIe 2.0 and the familiar 40-pin GPIO header. What safety precautions should I take when using the Raspberry Pi 5? The Raspberry Pi 5 should be operated in a well-ventilated area and should not be placed near water sources. It should be firmly secured or placed on a stable, flat, non-conductive surface.