ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul

  • ESP-32
  • |
  • 4251266700616
  • 5.14€ *

    including VAT plus shipping costs

    Available immediately
    36 piece · 2 - 4 working days

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    Notice

    Frequently Bought Together
    ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul
    ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul
    5.14€
    ESP32 NodeMCU Development Board
    ESP32 NodeMCU Development Board
       
    6.86€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.32€
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    8.67€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.92€
    =
    Total:
    23.91€*
    VAT included. plus shipping and handling
    Frequently Bought Together
    ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul
    ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul
    5.14€
    ESP32 NodeMCU Development Board
    ESP32 NodeMCU Development Board
       
    6.86€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.32€
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    8.67€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.92€
    =
    Total:
    23.91€*
    VAT included. plus shipping and handling
    Der ESP-WROOM-32 basiert auf Espressifs fortschrittlichstem SoC und verfügt über eine... more
    "ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul"
    Der ESP-WROOM-32 basiert auf Espressifs fortschrittlichstem SoC und verfügt über eine hohe Leistung, eine breite Palette an Peripheriegeräten, Wi-Fi und Bluetooth-Funk, die eine Komplettlösung für fortschrittliche IoT-Anwendungen bieten.

    Eigenschaften
    • 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS 
    • Integrated 520 KB SRAM 
    • Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP 
    • Integrated dual mode Bluetooth (classic and BLE) 
    • 4 MByte flash 
    • 2.2V to 3.6V operating voltage 
    • -40°C to +125°C operating temperature 
    • On-board PCB antenna / IPEX connector for external antenna 
    • Supports sniffer, station, softAP and Wi-Fi direct modes 
    • Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b
    • Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
    • Minimum receiver sensitivity of -98 dBm 
    • 135 Mbps UDP sustained throughput 
    • 2.5 µA deep sleep current

     

    Wi-Fi 802.11 b/g/n/e/i
    802.11 n (2.4 GHz), up to 150 Mbps
    802.11 e: QoS for wireless multimedia technology
    WMM-PS, UAPSD
    A-MPDU and A-MSDU aggregation
    Block ACK
    Fragmentation and defragmentation
    Automatic Beacon monitoring/scanning
    802.11 i security features: pre-authentication and TSN
    Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
    Infrastructure BSS Station mode/SoftAP mode
    Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
    UMA compliant and certified
    Antenna diversity and selection
    Compliant with Bluetooth v4.2 BR/EDR and BLE specification
    Bluetooth Class-1, class-2 and class-3 transmitter without external power amplifier
    Enhanced power control
    +10 dBm transmitting power
    NZIF receiver with -98 dBm sensitivity
    Adaptive Frequency Hopping (AFH)
    Standard HCI based on SDIO/SPI/UART
    High speed UART HCI, up to 4 Mbps
    BT 4.2 controller and host stack
    Service Discover Protocol (SDP)
    General Access Profile (GAP)
    Security Manage Protocol (SMP)
    Bluetooth Low Energy (BLE)
    ATT/GATT
    HID
    All GATT-based profile supported
    SPP-Like GATT-based profile
    BLE Beacon
    A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
    CVSD and SBC for audio codec
    Bluetooth Piconet and Scatternet



    ESP32 vs ESP8266:
     
    ESP32ESP8266
    Ethernet MAC Interface Nicht vorhanden
    GPIOs für 10 Touch-Sensoren Nicht vorhanden
    Temperatur-Sensor (on-chip) Nicht vorhanden
    Remote-Controller-Funktionalität Nicht vorhanden
    Hall-Sensor Nicht vorhanden
    Digital-to-Analog Converter (DAC) Nicht vorhanden
    CAN 2.0 Nicht vorhanden
    Analog-to-Digital Converter (ADC): 16 Kanäle mit 12-Bit 
    SAR-ADC mit Unterstützung für einen Low-Noise Amplifier (LNA)
    10-bit ADC, kein LNA
    2 I2C-Schnittstellen 1 I2C-Schnittstelle
    16 Kanäle für PWM 8 Kanäle für PWM
    GPIOs (General-Purpose Input/Output): 36 GPIOs: 17
    4 SPI-Schnittstellen mit Quad-SPI und maximal 80 MHz 3 SPI-Schnittstellen mit Quad-SPI und maximal 80 MHz
    Related links to "ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul"
    Data "ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul"
    Order number: ESP-32
    Gross weight (in kg): 0.010
    EAN/UPC: 4251266700616
    Manufacturer: BerryBase
    Manufacturer Number: ESP-32
    HS-Code: 85423990
    Country of origin: China
    Read, write and discuss reviews... more
    Customer evaluation for "ESP-WROOM-32 - ESP32 WiFi / Bluetooth Modul"
    Write an evaluation
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    The fields marked with * are required.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Content 10 Meter (0.13€ * / 1 Meter)
    1.32€ *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Content 10 Meter (0.19€ * / 1 Meter)
    1.92€ *
    Viewed

    Switch to the appropriate shop now

    We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.