Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen
Menü
Beschreibung

Produktinformationen "Elecrow RGB Angel Eye light, mini LEDs, outer illuminated ring (RGB), inner ring (white) "

Elecrow RGB Angel Eye light for model cars or DIY projects
This model lamp is available in two versions: one without channel control (standard) and one with channel control. Both models have an outer light ring (rainbow colours) and an inner light ring (white colour). In the normal model, the outer illuminated ring is always lit, while the inner ring can be controlled with a switch and the cable length is 50 mm in total. Compared to the ordinary model lamp, the model with channel control offers several modes, such as switching on only the outer or inner ring, switching on both, flashing or switching off both.

Features at a glance
  • Easy to operate
  • Works without channel control
Technical data
  • Colour of the outer ring: Rainbow
  • Colour of the inner ring: White
  • Total cable length: 50mm
  • Diameter of the outer illuminated ring: 10mm
  • Diameter of the inner illuminated ring: 5mm
Other data
  • Suitable for modelling and DIY projects
Scope of delivery
  • 1x Elecrow RGB Angel Eye light
Eigenschaften
Zolltarifnummer: 94054990
Brand: Elecrow
Country of Origin: China
Gross Weight (kg): 0.916
Manufacturer ID: CTD01099L
Product ID: CTD01099L
Manufacturer and safety information
Manufacturer information
Elecrow
Nanchang Huafeng Industrial Park
CN Baoan District, Shenzhen
https://www.elecrow.com/
service18@elecrow.com

WEEE number: 85275112

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions
  • Read the operating instructions in full before use.
  • Disconnect the power supply before maintenance or installation.
  • Only use components within the intended voltage or power range.
  • Protect components from moisture, extreme temperatures and dust.
  • Not suitable for use in safety-critical applications.
  • Dispose of defective components properly; dispose of electronic components as electronic waste.
  • Protect small parts and cables from children and unauthorised persons.
  • Handle sharp edges and moving parts with care, risk of injury.
  • Avoid static discharge during installation by earthing.
  • Dispose of in accordance with the applicable local regulations.
Bewertungen
0

0 von 0 Bewertungen

Durchschnittliche Bewertung von 0 von 5 Sternen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.


Produktgalerie überspringen

Kunden kauften auch

%
Combo SSD Konverter / Adapter, M.2 NVMe oder SATA, USB 3.2
Dieser Combo-Konverter ermöglicht die Verbindung einer M.2 PCIe NVMe SSD oder einer M.2 SATA SSD über USB an einen Computer oder ein Notebook. Der Konverter ist mit den SSD-Formaten 2280, 2260, 2242 und 2230 kompatibel und unterstützt sowohl M.2 SSDs mit PCIe (NVMe) als auch SATA-Schnittstelle. Mit dem USB 3.2 Gen 2-Anschluss sind Datentransferraten von bis zu 10 Gbps möglich. Er eignet sich hervorragend als Testequipment durch den direkten Einbau der SSD und die Plug & Play-Funktionalität. Merkmale im Überblick Kompatibel mit M.2 PCIe NVMe und SATA SSDs Unterstützt Datentransferraten von bis zu 10 Gbps Plug & Play, kein zusätzliches Gehäuse notwendig Technische Daten 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Typ-A Stecker 1 x 67-Pin M.2 Key M Slot Chipsatz: Realtek RTL9210B Unterstützte Formate: 2280, 2260, 2242, 2230 mit Key M oder Key B+M Datentransferrate: bis zu 10 Gbps Abmessungen (LxBxH): ca. 110 x 22 x 6 mm Systemvoraussetzungen Android 11.0 oder neuer, Chrome OS, Linux Kernel 5.13 oder neuer, Mac OS 12.3.1 oder neuer, Windows 8.1/8.1-64/10/10-64/11 PC oder Notebook mit einem freien USB Typ-A Port Lieferumfang 1x M.2 Konverter 1x Befestigungsmaterial 1x Schraubendreher
€9.99 €13.90 (28.13% gespart)

Sofort verfügbar · 100+ Stück · 1-3 days

ST25R3911B NFC development kit, STM32 controller, multiple protocols
This is an NFC development kit based on the ST25R3911B, with STM32F103R controller, OLED display, user buttons and commonly used interfaces. It is the ideal choice for learning and developing NFC applications. The kit supports multiple NFC protocols, has an output power of up to 1.4 W and a capacitive low-power wake-up function. It is suitable for applications that require high RF performance, flexibility and low power consumption, such as access control, ticketing, industrial, medical treatment, consumer goods, etc. Features Multi-protocol support: ISO18092, ISO14443A, ISO14443B , ISO15693, FeliCa... Differential antenna design, output power up to 1.4 W, longer range Built-in capacitive sensor with low power consumption, enables nearby card detection and capacitive wake-up without activating the reader's magnetic field STM32F103RBT6 controller, easy to learn, evaluate or integrate directly, requires no additional external controller 1.3" OLED display, enables visual operation Onboard SRAM, additional space to the internal RAM Micro SD slot, supports external TF card for storing data to be transferred via NFC 4x buttons, 2x user indicators, convenient for debugging Onboard programming interface, UART debugging interface, breakout all the unused IO pins for connecting other user peripherals Customised acrylic case, protective and dust-proof, better looking Comes with development resources and manual Specifications NFC chip: ST25R3911B Operating frequency: 13.56MHz Output power: 1.4W (max) Communication interface: SPI Protocol support ISO18092 (NFCIP-1) active P2P ISO14443A, ISO14443B, and FeliCa? ISO15693 Other customised protocols (like MIFARE? Classic) Power supply voltage: 5V Operating voltage: 3.3V What's on Board STM32F103RBT6 Core: ARM? 32-bit Cortex?-M3 Operating Frequency:72MHz Operating Voltage:2.0V-3.6V Package:LQFP64 Memories: 128kB Flash, 20kB SRAM Communication Interfaces: 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB AD & DA Converters: 2 x AD (12-bit, shares 16 channels) ST25R3911B: NFC chip, aka AS3911B 23LC1024: SRAM, 1Mbit CP2102: USB TO UART converter, for debugging SPX3819: 3.3V voltage regulator 1.3" OLED: blue display, 128?64 pixels, SH1106 driver 4x user buttons: 2x user indicators MCU unused pins USB TO UART port Micro SD slot SWD programming interface NFC induction coil UART pin configuration RXD: connected to RXD2 by default, changeable to RXD1 via 0? resistor TXD: connected to TXD2 by default, changeable to TXD1 via 0? resistor Wiki : www.waveshare.com/wiki/ST25R3911B_NFC_Board
€31.40

Sofort verfügbar · 15 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

NeoPixel ring with 24 WS2812 5050 RGB LEDs
This small, intelligent RGB LED ring with 24 WS2812 LEDs can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data: Operating voltage: 4 - 7 V LED dimensions: 5 x 5 x 1.50 mm Outer diameter: approx. 86 mm Diameter inside: approx. 72 mm Height: 3.15 mm Note: The components shown are for presentation purposes only and are not included in the scope of delivery! You are only purchasing the NeoPixel ring.
€6.90

Sofort verfügbar · 26 Stück · 1-3 days

Makeblock mBuild RGB LED strip light set, 2x programmable LEDs for lighting effects, 112 x 8 mm,
Makeblock mBuild RGB LED light strip set, programmable LEDs for lighting effects, 9 g The Makeblock mBuild RGB LED light strip set enables the programming of light strips in different colours and brightnesses to produce a variety of lighting effects, whether for ambient lighting or creative lighting effects. The set is ideal for DIY projects and educational applications where visual effects play a role. Features at a glance Programmable RGB LEDs: Colours and brightness can be adjusted as required. Compact size: LED strip light measuring 112 x 8 mm. Lightweight: Each light strip weighs only 9 g, ideal for flexible installations. RoHS compliant: Environmentally friendly and safe to use. Ideal for creative and technical projects: Perfect for visual effects and lighting solutions. Technical data Size: 112 x 8 mm Weight: 9 g RoHS compliant Scope of delivery 2x LED light strip 112 mm 2x mBuild communication cable 20 cm
€4.95

Sofort verfügbar · 68 Stück · 1-3 days

Durchschnittliche Bewertung von 4.8 von 5 Sternen

Panasonic photo battery lithium 3V CR123A, blister pack of 1
CR123ALithium battery, 3 VTechnical data: - IEC name: CR123A - Voltage: 3 V- Diameter: 17 mm- Height: 34.5 mm- Manufacturer's designation: 2/3A, 123, 16340, CR17355, CR17345, CR123 - Model designation: CR-123AL - Rechargeable: no - Technology: Lithium battery - Consumption unit: 1 pc. Blister pack
€2.90

Sofort verfügbar · 52 Stück · 1-3 days

Durchschnittliche Bewertung von 4 von 5 Sternen

microSD card reader with USB 2.0 port, black
Card reader USB 2.0for reading MicroSD memory cards- reads MicroSD memory cards- supported formats: microSD, microSDHC, microSDXC- read speed of over 480 Mbps- fast data transfer thanks to Hi-Speed USB 2.0 connection- supports Plug &, Play and hot-swappingTechnical data: - data read speed: 480.00 MB/sSupplied without memory card
€3.30

Sofort verfügbar · 16 Stück · 1-3 days

Rocker switch, round, 1-pole, black, ON-ON
Small rocker switch, round design (20.2 mm hole) ON-ON - 1-pole - 250 VAC, 6A - Silver-plated contacts - Contact resistance 20 mOhm - Insulation resistance 1000 MOhm - With snap-in fastening and anti-rotation lock
€1.68

Sofort verfügbar · 10 Stück · 1-3 days

USB-C 3.0 adapter, C socket - C socket, black
USB 3.0 SuperSpeed adapterUSB-C socket - USB-C socket- for easy connection of two USB-C cables- SuperSpeed data transfers up to 5 Gbit/s 10 times faster than USB 2.0- backwards compatible with USB 2.0 and 1.1
€2.30

Sofort verfügbar · 2 Stück · 1-3 days

Replacement blades no. 1 for MS01/MS13/MS15, 5 pieces
5 pieces with straight cutting edges Suitable for MS01 / MS13 / MS15 Very sharp blades - keep away from children!
€0.99

Sofort verfügbar · 11 Stück · 1-3 days

1N4001 - Rectifier diode, THT, 50V, 1A, DO41
1N4001 - Rectifier diode, THT, 50V, 1A, DO41 This rectifier diode is suitable for through-hole mounting (THT) and supports a maximum reverse voltage of 50V with a forward current of 1A. Thanks to its robust design in the DO41 housing and high performance with a maximum forward current of 5.4A, it is ideal for a wide range of applications in electronics. Features at a glanceHigh reliability: maximum forward current load of 5.4A and pulse current capacity of 30A.Energy efficiency: minimum forward voltage of only 1.1V reduces energy losses. Technical specifications Diode type: Rectifier Mounting: THT Maximum reverse voltage: 50V Forward current: 1A Forward current max.: 5.4A Semiconductor structure: single diode Max. pulse current: 30A Housing: DO41 Forward voltage max.: 1.1V Leakage current: 50µA Standby time: 1.5µs Other data Ideally suited for high-frequency applications and energy conversion Scope of delivery 1x 1N4001 rectifier diode
€0.08

Sofort verfügbar · 100+ Stück · 1-3 days

Produktgalerie überspringen

Mehr von Elecrow

Elecrow 2.4G WiFi-Antenne, 4dBi, 50 Ohm, Frequenz 2400-2500 MHz, -40°C bis +65°C
€0.90

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow 8mm waterproof Android OTG endoscope HD CMOS camera, 6 LED lights, 5m cable, IP67
€14.90

Artikel aktuell nicht lieferbar

%
Elecrow aircraft lighting system with Attiny85 microcontroller, LED navigation lights, 5V
€21.90 €24.90 (12.05% gespart)

Sofort verfügbar · 1 Stück · 1-3 days

Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20 mm, black
€3.90

Sofort verfügbar · 18 Stück · 1-3 days

Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20mm, silver
€3.90

Sofort verfügbar · 3 Stück · 1-3 days

Elecrow ATtiny digital cube key fob, decision aid, RGB LEDs
€24.90

Artikel aktuell nicht lieferbar

Elecrow Automatic Plant Watering Kit 2.1, Arduino based, for up to 4 plants
€64.90

Artikel aktuell nicht lieferbar

Elecrow Can-Bus Shield, Arduino Mega/Leonardo compatible, CAN V2.0B, 9-pin Sub-D, Micro-SD, V1.5
€7.90

Artikel aktuell nicht lieferbar

Elecrow CQA240327P Lora RFM95 IOT Board für RPI, Crowtail, 915MHz, 20dBm, LoRa Modem, I2C, 120mA, 5V
€8.90

Artikel aktuell nicht lieferbar

Durchschnittliche Bewertung von 4 von 5 Sternen

Elecrow CrowPanel E-Paper HMI Display, 1.54 inch, 152x152 resolution, ESP32-S3, SPI, black and white
€16.90

Sofort verfügbar · 36 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 2.13 inch, 122x250 resolution, ESP32-S3, SPI, black and white
€17.90

Sofort verfügbar · 23 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI display, 2.9 inch, 128x296 resolution, ESP32-S3, SPI, black and white
€23.90

Artikel aktuell nicht lieferbar

Elecrow CrowPanel E-Paper HMI Display, 3.7 inch, 240x416 resolution, ESP32-S3, SPI, black and white
€30.50

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 4.2 inch, 400x300 resolution, ESP32-S3, SPI, black and white
€36.90

Sofort verfügbar · 1 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 5.79 inch, 272x792 resolution, ESP32-S3, SPI, black and white
€37.90

Artikel aktuell nicht lieferbar

Elecrow CrowPi L Base Shield, GPIO-Schnittstelle, ADC-Chip, SPI, Acrylgehäuse, für Crowtail-Module
€11.90

Sofort verfügbar · 10 Stück · 1-3 days

Elecrow CrowPi L Raspberry Pi Laptop, 11,6 Zoll Display, 40-Pin GPIO, 5000mAh Akku, ohne Pi, QWERTY
€249.90

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Base Shield 2.0 for Arduino, I2C UART Analogue Digital, 4-Pin JST, 3.3-5V
€4.50

Sofort verfügbar · 10 Stück · 1-3 days

Elecrow Crowtail Base Shield 2.0 for Raspberry Pi, UART I2C Analogue Digital, MCP3008
€6.90

Sofort verfügbar · 29 Stück · 1-3 days

Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable for modules, 20.5 cm, 5 pieces
€1.50

Sofort verfügbar · 79 Stück · 1-3 days

Elecrow Crowtail Collision Sensor 2.0, contact sensor for collision detection, JST-PH 4-pin, 3.3-5V
€1.60

Sofort verfügbar · 11 Stück · 1-3 days

Elecrow Crowtail connector JST-PH 2.0, 4-pin, 2.0mm pitch, without cable, 10 pieces
€1.00

Artikel aktuell nicht lieferbar

Elecrow Crowtail encoder 2.0, incremental encoder, 20 pulses/revolution, JST-PH 4-pin, 5.0V
€2.50

Artikel aktuell nicht lieferbar

Elecrow Crowtail gas sensor MQ3, alcohol gas detection, analogue output, JST-PH 2.0 4-pin, 3W, 5V
€5.90

Sofort verfügbar · 4 Stück · 1-3 days

Elecrow Crowtail infrared sensor, adjustable, 3-50cm detection, JST-PH 2.0 4-pin, 100mA, 5V
€6.50

Sofort verfügbar · 9 Stück · 1-3 days

Elecrow Crowtail laser pointer 2.0, compatible with Crowtail base module, 5mW, 650nm wavelength
€1.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail MOSFET 2.0, fan control, switching voltage 5-50V DC, control voltage 5V
€1.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail NFC 2.0, RFID reader and NFC module with PN532, 13.56 MHz, UART and IIC protocol
€13.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Protoboard 2.0, breadboard, 4-pin cable, S0 S1 VCC GND, 2.54mm pitch
€0.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Relay 2.0, JST-PH 4-pin, SPST, 5V control, 30A switching capacity, 240VAC, 30VDC
€1.90

Sofort verfügbar · 6 Stück · 1-3 days

Elecrow Crowtail RGB LED 2.0, 4x WS2812B, addressable, cascadable, JST-PH 2.0, 5V
€1.90

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow Crowtail RTC module DS1307, calendar function, I2C, JST-PH 4-pin connector, 5V
€2.70

Artikel aktuell nicht lieferbar

Kunden kauften auch
Pololu Zumo Raspberry Pi RP2040 robot, 75:1 HP geared motors, IMU sensors, quadrature encoder
Pololu Zumo Raspberry Pi RP2040 robot, 75:1 HP geared motors, IMU sensors, quadrature encoder The Zumo 2040 is a versatile, user-programmable tracked robot based on the Raspberry Pi RP2040 microcontroller. This version includes two 75:1 HP Micro Metal geared motors, integrated motor controllers, quadrature encoders, line and proximity sensors, and a complete IMU system for motion detection and orientation sensing. The robot measures less than 10 cm x 10 cm and is suitable for mini sumo competitions. No soldering or assembly is required, just add 4 AA batteries and programme via USB-C. The Zumo 2040 robot is a versatile tracked robot based on the Raspberry Pi RP2040 microcontroller. It is driven by 75:1 HP Micro Metal geared motors that convert rotary motion into high force, ideal for small robotic applications. These motors are connected to integrated motor controllers that enable precise control of movements. The robot uses quadrature encoders to track the exact rotation and position of the motors, ensuring precise movement and control. The Zumo 2040's IMU (Inertial Measurement Unit) includes three important sensors: Accelerometer, which measures the robot's movement and helps determine its speed. Gyroscope, which measures the rotational speed and monitors the orientation of the robot. Magnetometer, which helps the robot to determine its orientation relative to the Earth's magnetic field, similar to a compass. In addition, the robot is equipped with proximity and line follower sensors that detect obstacles and help the robot to orientate itself and avoid obstacles. The Zumo 2040 is programmable in C, C++, Arduino or Python, allowing for flexible customisation and control. This makes it ideal for mini-Sumo competitions and learning projects. It is easily programmed via a USB-C connection and requires no external programming or soldering. Features at a glance Versatile chain robot based on the Raspberry Pi RP2040 microcontroller Includes two 75:1 HP micro metal geared motors and integrated motor controllers Integrated quadrature encoders for closed-loop control of the motors Proximity and line follower sensors for obstacle detection Complete inertial measurement unit (IMU) with accelerometer, gyroscope and magnetometer Six RGB LEDs, OLED display and buzzer for user interaction Programmable in C, C++, Arduino or Python Compatibility The Zumo 2040 is compatible with a wide range of accessories, including Sparkfun Qwiic and Adafruit STEMMA QT devices, which can be connected to the RP2040's I2C0 bus via a 4-pin JST SH-compatible connector. The power rails and I/O lines of the microcontroller are accessed via 0.1" grid vias on the sides and front of the main board. Technical data Size: 96L × 99W × 39H mm Weight: 160 g (assembled robot without batteries) Processor: Raspberry Pi RP2040 at 125 MHz RAM size: 264 Kbytes Programme memory: 16 Mbytes (128 Mbit) Flash Motor type: 75:1 HP Micro Metal geared motors Mounted: Yes Version: Assembled with 75:1 HP motors Board codes: Zum03a Other PCB markings: 0J14237 Other data Programmable via USB-C interface Pre-installed MicroPython interpreter OLED display 128x64 for graphical representation 3 on-board buttons for user input No external programmers required Scope of delivery Zumo 2040 robot with pre-installed 75:1 HP motors 6x RGB LEDs OLED display Quadrature encoder and IMU sensors USB-C connection for programming Link to Pinout diagram of the Zumo 2040 main board Circuit diagram of the Zumo 2040 main board and front sensor array Dimension diagram of the Zumo 2040 robot Dimension diagram of the Zumo 2040 main board
€129.90

Sofort verfügbar · 2 Stück · 1-3 days

Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne. Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt.  RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren. Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen. Technische Daten Formfaktor: 21 mm × 51 mm CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins Peripherie: 2 × UART 2 × SPI-Controller 2 × I2C-Controller 24 × PWM-Kanäle 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung 12 × PIO-Zustandsmaschinen Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2 Eingangsspannung: 1,8–5,5V DC Betriebstemperatur: -20°C bis +85°C Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion Downloads Raspberry Pi Pico 2 Product Brief Raspberry Pi Pico 2 MicroPython SDK Raspberry Pi Pico 2 C/C++ SDK RP2350 Datenblatt
€7.50

Sofort verfügbar · 100+ Stück · 1-3 days

Pin header set for Raspberry Pi Pico, colour-coded, on the side
This colour-coded pin header set is ideal for use with the Raspberry Pi Pico.All pins are colour-coded with corresponding functions and make prototyping and hacking easier.This version comes with colour coding on the side and 5 coding colours.Technical data:suitable for Raspberry Pi Pico2x 20 pin and 1x pin header2.54mm pin spacing (pitch)Pin height: 3 / 6 mmTotal height: approx. 11 mm
€1.10

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi AI Camera
Das Raspberry Pi AI Kamera Modul ist ein kompaktes Kameramodul von Raspberry Pi, basierend auf dem Sony IMX500 Intelligent Vision Sensor. Der IMX500 kombiniert einen 12-Megapixel-CMOS-Bildsensor mit on-board Inferenzbeschleunigung für eine Vielzahl gängiger neuronaler Netzmodelle, was es Benutzern ermöglicht, anspruchsvolle auf Vision basierende KI-Anwendungen zu entwickeln, ohne dass ein separater Beschleuniger erforderlich ist. Die AI Kamera ergänzt aufgenommene Standbilder oder Videos transparent mit Tensor-Metadaten, wodurch der Prozessor im Host-Raspberry Pi andere Operationen durchführen kann. Unterstützung für Tensor-Metadaten in den libcamera und Picamera2-Bibliotheken sowie in der rpicam-apps-Anwendungssuite machen die Nutzung für Anfänger einfach, während fortgeschrittene Benutzer unübertroffene Leistung und Flexibilität genießen. Die Raspberry Pi AI Kamera ist mit allen Raspberry Pi Computern kompatibel. Eigenschaften 12-Megapixel CMOS-Bildsensor On-Board Inferenzbeschleunigung Transparente Ergänzung von Tensor-Metadaten Unterstützung durch libcamera und Picamera2 Bibliotheken Kompatibel mit allen Raspberry Pi Computern Technische Daten Sensor: Sony IMX500 Auflösung: 12,3 Megapixel Sensorgröße: 7,857 mm (Typ 1/2,3) Pixelgröße: 1,55 µm x 1,55 µm Horizontal/Vertikal: 4056 x 3040 Pixel IR-Sperrfilter: Integriert Autofokus-System: Manuell einstellbarer Fokus Fokusbereich: 20 cm - ∞ Brennweite: 4,74 mm Horizontaler Sichtwinkel: 66 ±3 Grad Vertikaler Sichtwinkel: 52,3 ±3 Grad Blendenzahl (F-Stop): F1.79 Infrarotempfindlich: Nein Ausgabe: Bild (Bayer RAW10), ISP-Ausgabe (YUV/RGB), ROI, Metadaten Eingabematrix maximale Größe: 640(H) x 640(V) Eingabedatentyp: 'int8' oder 'uint8' Speichergröße: 8388480 Bytes für Firmware, Netzwerkgewicht-Datei und Arbeitspeicher Bildrate: 2x2 binned: 2028x1520 10-bit 30fps, Volle Auflösung: 4056x3040 10-bit 10fps Abmessungen: 25 x 24 x 11,9 mm Flachbandkabel Länge: 200 mm Flachbandkabel-Anschluss: 15 x 1 mm FPC oder 22 x 0,5 mm FPC Betriebstemperatur: 0°C bis 50°C Lieferumfang Raspberry Pi AI Camera Raspberry Pi Camera Cable, Standard - Mini für Raspberry Pi 5, Zero Raspberry Pi Camera Cable, Standard - Standard für Raspberry Pi 4 und ältere Generationen Lens Adjustment / Fokus Tool Downloads Raspberry Pi AI Camera Product Brief Getting started with Raspberry Pi AI Camera
€77.90

Sofort verfügbar · 92 Stück · 1-3 days

DFRobot metal Mecanum wheel 65mm diameter, coupling diameter 4mm, 5kg load capacity, right-hand side
DFRobot Metal Mecanum Wheel with Motor Shaft Coupling (65mm) - Right This is a mecanum wheel with a metal outer structure and a coupling that is compatible with various motor shafts, which makes installation easier. The wheel has a diameter of 65 mm and consists of 9 small roller balls made of robust plastic and coated with high-friction silicone rubber. This design makes the wheel particularly impact-resistant and durable. It is ideal for applications where precise control and high manoeuvrability are required. Explanation of Mecanum wheels Mecanum wheels are a special type of omnidirectional wheel that allows vehicles to move in all directions without changing orientation. This technology is particularly useful in applications that require high manoeuvrability and precise control, such as robotic vehicles or automation technology. Mecanum wheels consist of rollers attached to a wheel at an angle and their arrangement allows the vehicle to move forwards, backwards, sideways or diagonally. This enables almost free movement. Importance of left and right-hand variants Mecanum wheels are available in two variants: one for the left-hand side and one for the right-hand side of the vehicle. The rollers on the right-hand Mecanum wheels are inclined in one direction, while they are inclined in the opposite direction on the left-hand wheels. This different inclination of the castors ensures that the forces generated act correctly on the vehicle and that it can move stably in all directions. Features at a glance Compact size and high load capacity: The 65 mm diameter and robust construction ensure stable and reliable performance. Stable and durable construction: Designed for long life and reliable performance in demanding environments. Easy to install: The supplied shaft coupling makes installation quick and easy. Technical details of the Mecanum wheel Diameter: 65 mm (2.56") Coupling diameter: 4 mm Thickness: 43 mm (1.69") (14 mm of which is accounted for by the coupling) Number of roller balls: 9 Angle: 45° Load capacity: 5 kg Material: Metal structure + plastic rollers Scope of delivery 1x metal Mecanum wheel (65mm) - Right
€8.90

Sofort verfügbar · 12 Stück · 1-3 days

DFRobot metal Mecanum wheel 65mm diameter, coupling diameter 4mm, 5kg load capacity, left
DFRobot Metal Mecanum Wheel with Motor Shaft Coupling (65mm) - Links This is a mecanum wheel with a metal outer structure and a coupling that is compatible with various motor shafts, which makes installation easier. The wheel has a diameter of 65 mm and consists of 9 small roller balls made of robust plastic and coated with high-friction silicone rubber. This design makes the wheel particularly impact-resistant and durable. It is ideal for applications where precise control and high manoeuvrability are required. Explanation of Mecanum wheels Mecanum wheels are a special type of omnidirectional wheel that allows vehicles to move in all directions without changing orientation. This technology is particularly useful in applications that require high manoeuvrability and precise control, such as robotic vehicles or automation technology. Mecanum wheels consist of rollers attached to a wheel at an angle and their arrangement allows the vehicle to move forwards, backwards, sideways or diagonally. This enables almost free movement. Importance of left and right-hand variants Mecanum wheels are available in two variants: one for the left-hand side and one for the right-hand side of the vehicle. The rollers on the right-hand Mecanum wheels are inclined in one direction, while they are inclined in the opposite direction on the left-hand wheels. This different inclination of the castors ensures that the forces generated act correctly on the vehicle and that it can move stably in all directions. Features at a glance Compact size and high load capacity: The 65 mm diameter and robust construction ensure stable and reliable performance. Stable and durable construction: Designed for long life and reliable performance in demanding environments. Easy to install: The supplied shaft coupling makes installation quick and easy. Technical details of the Mecanum wheel Diameter: 65 mm (2.56") Coupling diameter: 4 mm Thickness: 43 mm (1.69") (14 mm of which is accounted for by the coupling) Number of roller balls: 9 Angle: 45° Load capacity: 5 kg Material: Metal structure + plastic rollers Scope of delivery 1x metal Mecanum wheel (65mm) - Left
€8.90

Sofort verfügbar · 11 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

NeoPixel ring with 24 WS2812 5050 RGB LEDs
This small, intelligent RGB LED ring with 24 WS2812 LEDs can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data: Operating voltage: 4 - 7 V LED dimensions: 5 x 5 x 1.50 mm Outer diameter: approx. 86 mm Diameter inside: approx. 72 mm Height: 3.15 mm Note: The components shown are for presentation purposes only and are not included in the scope of delivery! You are only purchasing the NeoPixel ring.
€6.90

Sofort verfügbar · 26 Stück · 1-3 days

Makeblock mBuild RGB LED strip light set, 2x programmable LEDs for lighting effects, 112 x 8 mm,
Makeblock mBuild RGB LED light strip set, programmable LEDs for lighting effects, 9 g The Makeblock mBuild RGB LED light strip set enables the programming of light strips in different colours and brightnesses to produce a variety of lighting effects, whether for ambient lighting or creative lighting effects. The set is ideal for DIY projects and educational applications where visual effects play a role. Features at a glance Programmable RGB LEDs: Colours and brightness can be adjusted as required. Compact size: LED strip light measuring 112 x 8 mm. Lightweight: Each light strip weighs only 9 g, ideal for flexible installations. RoHS compliant: Environmentally friendly and safe to use. Ideal for creative and technical projects: Perfect for visual effects and lighting solutions. Technical data Size: 112 x 8 mm Weight: 9 g RoHS compliant Scope of delivery 2x LED light strip 112 mm 2x mBuild communication cable 20 cm
€4.95

Sofort verfügbar · 68 Stück · 1-3 days

%
Combo SSD Konverter / Adapter, M.2 NVMe oder SATA, USB 3.2
Dieser Combo-Konverter ermöglicht die Verbindung einer M.2 PCIe NVMe SSD oder einer M.2 SATA SSD über USB an einen Computer oder ein Notebook. Der Konverter ist mit den SSD-Formaten 2280, 2260, 2242 und 2230 kompatibel und unterstützt sowohl M.2 SSDs mit PCIe (NVMe) als auch SATA-Schnittstelle. Mit dem USB 3.2 Gen 2-Anschluss sind Datentransferraten von bis zu 10 Gbps möglich. Er eignet sich hervorragend als Testequipment durch den direkten Einbau der SSD und die Plug & Play-Funktionalität. Merkmale im Überblick Kompatibel mit M.2 PCIe NVMe und SATA SSDs Unterstützt Datentransferraten von bis zu 10 Gbps Plug & Play, kein zusätzliches Gehäuse notwendig Technische Daten 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Typ-A Stecker 1 x 67-Pin M.2 Key M Slot Chipsatz: Realtek RTL9210B Unterstützte Formate: 2280, 2260, 2242, 2230 mit Key M oder Key B+M Datentransferrate: bis zu 10 Gbps Abmessungen (LxBxH): ca. 110 x 22 x 6 mm Systemvoraussetzungen Android 11.0 oder neuer, Chrome OS, Linux Kernel 5.13 oder neuer, Mac OS 12.3.1 oder neuer, Windows 8.1/8.1-64/10/10-64/11 PC oder Notebook mit einem freien USB Typ-A Port Lieferumfang 1x M.2 Konverter 1x Befestigungsmaterial 1x Schraubendreher
€9.99 €13.90 (28.13% gespart)

Sofort verfügbar · 100+ Stück · 1-3 days

ST25R3911B NFC development kit, STM32 controller, multiple protocols
This is an NFC development kit based on the ST25R3911B, with STM32F103R controller, OLED display, user buttons and commonly used interfaces. It is the ideal choice for learning and developing NFC applications. The kit supports multiple NFC protocols, has an output power of up to 1.4 W and a capacitive low-power wake-up function. It is suitable for applications that require high RF performance, flexibility and low power consumption, such as access control, ticketing, industrial, medical treatment, consumer goods, etc. Features Multi-protocol support: ISO18092, ISO14443A, ISO14443B , ISO15693, FeliCa... Differential antenna design, output power up to 1.4 W, longer range Built-in capacitive sensor with low power consumption, enables nearby card detection and capacitive wake-up without activating the reader's magnetic field STM32F103RBT6 controller, easy to learn, evaluate or integrate directly, requires no additional external controller 1.3" OLED display, enables visual operation Onboard SRAM, additional space to the internal RAM Micro SD slot, supports external TF card for storing data to be transferred via NFC 4x buttons, 2x user indicators, convenient for debugging Onboard programming interface, UART debugging interface, breakout all the unused IO pins for connecting other user peripherals Customised acrylic case, protective and dust-proof, better looking Comes with development resources and manual Specifications NFC chip: ST25R3911B Operating frequency: 13.56MHz Output power: 1.4W (max) Communication interface: SPI Protocol support ISO18092 (NFCIP-1) active P2P ISO14443A, ISO14443B, and FeliCa? ISO15693 Other customised protocols (like MIFARE? Classic) Power supply voltage: 5V Operating voltage: 3.3V What's on Board STM32F103RBT6 Core: ARM? 32-bit Cortex?-M3 Operating Frequency:72MHz Operating Voltage:2.0V-3.6V Package:LQFP64 Memories: 128kB Flash, 20kB SRAM Communication Interfaces: 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB AD & DA Converters: 2 x AD (12-bit, shares 16 channels) ST25R3911B: NFC chip, aka AS3911B 23LC1024: SRAM, 1Mbit CP2102: USB TO UART converter, for debugging SPX3819: 3.3V voltage regulator 1.3" OLED: blue display, 128?64 pixels, SH1106 driver 4x user buttons: 2x user indicators MCU unused pins USB TO UART port Micro SD slot SWD programming interface NFC induction coil UART pin configuration RXD: connected to RXD2 by default, changeable to RXD1 via 0? resistor TXD: connected to TXD2 by default, changeable to TXD1 via 0? resistor Wiki : www.waveshare.com/wiki/ST25R3911B_NFC_Board
€31.40

Sofort verfügbar · 15 Stück · 1-3 days