Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen
Menü
Beschreibung

Produktinformationen "Elecrow DIY gear kit, 60 gears, 0.5 module, ABS plastic, gear racks, worm belts"

Gear kit for DIY/model accessories
This gear kit contains 60 different types of gears with a module of 0.5. The set includes gears for shafts (102A), copper gears and gears with a diameter of 2.3 mm and 3.17 mm. Racks, worms and belts are also included. The gears are made of ABS plastic and fulfil all requirements for DIY projects. With these gears, you can make many toy models yourself or replace missing parts on existing models.

Features at a glance
  • Contains 60 different types of gears
  • Made from robust ABS plastic
  • Ideal for DIY projects and modelling
  • Includes gear racks, worms and belts
Compatibility
  • Suitable for DIY toy models and modelling projects
Technical specifications
  • Module: 0.5
  • Material: ABS plastic
  • Gear sizes included: 2.3 mm and 3.17 mm
Other data
  • Shaft gears 102A included
  • Contains copper gears
Scope of delivery
  • 8x single gears
  • 10x spindle gears
  • 12x double gears
  • 7x pulleys
  • 9x crown gears
  • 2x blue motor gears
  • 4x belts
  • 3x bushes
  • 2x worms
  • 1x gear racks
  • 1x copper gears
  • 1x bevel gears
Eigenschaften
Zolltarifnummer: 84839089
Brand: Elecrow
Country of Origin: China
EAN: DIY27990G
Gross Weight (kg): 0.916
Manufacturer ID: DIY27990G
Product ID: DIY27990G
Manufacturer and safety information
Manufacturer information
Elecrow
Nanchang Huafeng Industrial Park
CN Baoan District, Shenzhen
https://www.elecrow.com/
service18@elecrow.com

WEEE number: 85275112

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions
  • Read the operating instructions in full before use.
  • Disconnect the power supply before maintenance or installation.
  • Only use components within the intended voltage or power range.
  • Protect components from moisture, extreme temperatures and dust.
  • Not suitable for use in safety-critical applications.
  • Dispose of defective components properly; dispose of electronic components as electronic waste.
  • Protect small parts and cables from children and unauthorised persons.
  • Handle sharp edges and moving parts with care, risk of injury.
  • Avoid static discharge during installation by earthing.
  • Dispose of in accordance with the applicable local regulations.
Bewertungen
0

0 von 0 Bewertungen

Durchschnittliche Bewertung von 0 von 5 Sternen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.


Produktgalerie überspringen

Kunden kauften auch

NeoPixel Jewel with 7 WS2812 5050 RGB LEDs
This small, intelligent RGB LED ring with 7 LEDs of type WS2812 can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data: Operating voltage: 4 - 7 V LED dimensions: 5 x 5 x 1.50 mm Diameter: 23 mm Height: 3.15 mm Note: The components and circuit boards shown are for presentation purposes only and are not included in the scope of delivery! You only buy the NeoPixel ring.
€2.40

Sofort verfügbar · 21 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

DC coupling for barrel connector 5.5x2.1mm - screw mounting terminal block 2-pin
DC coupling for barrel connector 5.5 x 2.1 mm - screw mounting Terminal block 2-pin This DC coupling for barrel connectors (5.5 x 2.1 mm) with screw mounting is ideal for quick wiring with stripped cable ends. It is ideal for use in the hobby sector, in alarm technology, in the AV sector or for test set-ups. The positive pole is on the inside, the negative pole on the outside, with a contact spacing of 5 mm. Features at a glance Versatile application: Suitable for hobby applications, alarm technology, AV applications and test set-ups. Simple installation: Screw fastening for quick wiring with stripped cable ends. Technical data Connection type: DC socket (5.50 x 2.10 mm) Connection 2, type: Terminal block 2-pin Contact spacing: 5 mm Positive pole inside, negative pole outside Scope of delivery 1x DC coupling for hollow plug 5.5x2.1 mm - screw mounting terminal block 2-pin
€0.35

Sofort verfügbar · 40 Stück · 1-3 days

Durchschnittliche Bewertung von 4.5 von 5 Sternen

Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm
Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm This short-stroke pushbutton is designed for vertical PCB mounting and has dimensions of 6x6mm and a button height of 5.0mm. It is suitable for applications with a contact load capacity of 0.05 A at 12 VDC and offers a switching force of 1.6N. Features at a glance High reliability: SPST-NO contact configuration and switching force of 1.6N. Versatility: Suitable for operating temperatures from -25 to 70°C. Easy mounting: Vertical PCB mounting with straight outputs. Technical data Switch type: Short-stroke pushbutton Number of switching positions: 1-digit Contact configuration: SPST-NO Contact rating DC (with resistive load): 0.05 A / 12 VDC Mounting: Push-through mounting Switching force: 1.6N Housing dimensions: 6 x 6mm Button height (PCB-measured): 5.0mm Switching mode: OFF-(ON) Button shape: round Output grid: 4.5 x 6.5mm Operating temperature: -25 to 70°C Button colour: black Outputs: PCB mounting, straight Max. Contact resistance: 50mΩ Min. insulation resistance: 100mΩ Soldering temperature: 250°C Scope of delivery 1x short-stroke push-button, vertical PCB mounting, 6x6mm, H 5.0mm
€0.09

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 4.3 von 5 Sternen

Crimping pliers for Dupont connectors on AWG 18-28 cable
Crimping pliers for Dupont connectors on AWG 18-28 cable sturdy steel crimping pliers for Dupont crimp contacts (male/female) AWG 18-28 cable Features Positive lock automatic release Ratchet function for even contact pressure
€19.90

Sofort verfügbar · 21 Stück · 1-3 days

Durchschnittliche Bewertung von 4.1 von 5 Sternen

610-piece Dupont crimp connector set in plastic box
610-piece Dupont crimp connector set in plastic box The 610-piece Dupont crimp connector set is ideal for DIY enthusiasts and professionals in the electronics sector. It offers an extensive selection of high-quality crimp contacts and connector housings that ensure a reliable and long-lasting connection. The set contains male and female contacts that are compatible with AWG 22-28 cables and are characterised by their ease of use. In addition, the supplied plastic box with compartments makes it easy to organise and store the parts. Features at a glance Various Dupont housings in sizes from 1x1 pin to 2x6 pin Comprehensive set with 610 parts Brass contacts with tin-plated coating Compatible with AWG 22-28 cables Technical specifications Pitch: 2.54mm Crimp contacts suitable for cable AWG: 22-28 Contact material: brass Contact coating: tin-plated Scope of delivery 610-piece Dupont crimp connector set in plastic box: 50x Dupont housing 1x1 pin 40x Dupont housing 1x2 pin 20x Dupont housing 1x3 pin 20x Dupont housing 1x4 pin 20x Dupont housing 1x5 pin 20x Dupont housing 1x6 pin 10x Dupont housing 2x2 pin 10x Dupont housing 2x3 pin 10x Dupont housing 2x4 pin 10x Dupont housing 2x5 pin 10x Dupont housing 2x6 pin 200x Dupont crimp contact female 200x Dupont crimp contact male
€9.90

Sofort verfügbar · 32 Stück · 1-3 days

Durchschnittliche Bewertung von 4.8 von 5 Sternen

Stranded copper wire insulated, 1x0.14mm, 10m
Insulated stranded copper wire, 10 mSingle-core copper cable, stranded (18x 0.1 mm)Unassembled stranded wire with a core cross-section of 0.14 mm² (AWG 26) and an outer diameter of 1.1 mmAs a flexible stranded cable with PVC insulation, it is particularly suitable for wiring electrical devices or assemblies, e.g. household appliances or measuring devicesIdeal for use as an electrical conductor in model making, e.g. for model railways (suitable for all track gauges)Excellent heat and cold resistanceCan be connected with wire end ferrules, spring and screw terminalsConductor construction (Cu): 18x 0.1 mmTechnical dataConnection 2, type: loose cable endsConnection, type: loose cable endsInner conductor, core cross-section: 0.14 mm²Cable length: 10 m
€1.20

Sofort verfügbar · 73 Stück · 1-3 days

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Pico WH is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.The Raspberry Pi Pico W is designed as a low-cost yet flexible development platform for the RP2040 with a 2.4 GHz wireless interface and the following key features:RP2040 microcontroller with 2 MB flash memoryIntegrated 2.4 GHz single-band wireless interface (802.11n)Micro USB-B connector for power and data (and for reprogramming the flash)40-pin 21mmx51mm 'DIP' PCB, 1mm thick, with 0.1" through-holes, also with edge decorations26 multifunctional 3.3 V general purpose inputs and outputs (GPIO) 23 GPIOs are purely digital, three of which are also ADC-capable Can be surface-mounted as a module3-pin ARM Serial Wire Debug Port (SWD)Simple but highly flexible power supply architectureVarious options for easy power supply via micro USB, external power supplies or batteries - High quality, low cost, high availabilityComprehensive SDK, software examples and documentation3-pin JTAG connector40-pin pre-soldered pin headerDetailed information about the RP2040 microcontroller can be found in the RP2040 datasheet. The most important features are:Dual-core Cortex M0+ with up to 133MHzOn-chip PLL enables variable core frequency264kByte multi-bank high performance SRAMExternal Quad SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cacheHigh-performance full crossbar bus structureOn-board USB1.1 (device or host)30 multifunction I/O (four can be used for ADC)1.8-3.3 V I/O voltage12-bit 500ksps analogue-to-digital converter (ADC)Various digital peripherals2 x UART, 2 × I2C, 2 × SPI, 16 x PWM channels1 x timer with 4 alarms, 1 x real-time clock2 x programmable I/O blocks (PIO), 8 state machines in totalFlexible, user-programmable high-speed I/OCan emulate interfaces such as SD card and VGAFor more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.
€7.20

Sofort verfügbar · 100+ Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

McPower solder, lead-free, Ø0.5mm, 100g roll
- 99.3% tin, 0.7% copper- lead-free- 0.5mm diameter- 100g on roll
€8.70

Sofort verfügbar · 8 Stück · 1-3 days

McPower solder, lead-free, Ø1mm, 100g roll
- 99.3% tin, 0.7% copper- lead-free- 1mm diameter- 100g on roll
€11.70

Sofort verfügbar · 11 Stück · 1-3 days

Durchschnittliche Bewertung von 3.6 von 5 Sternen

USB soldering iron, 5V / 8W
- max. 450°C- heat-up time approx. 15 sec.- cool-down time 30 sec.- incl. soldering iron stand, long-life soldering tip, protective cap, soldering tin original equipment
€6.90

Sofort verfügbar · 7 Stück · 1-3 days

Goobay soldering grease tin, 50 g
Goobay soldering grease tin, 50 gSoldering paste for soldering electronic componentsCan be used for all types of soldering work, instruments, copper, tin and other weldable metals.Creates an electrically conductive solder connection between the components and the solder padsThe solder paste is applied to the soldering surfaces of the circuit boards. The components to be soldered are then pressed into the paste on the circuit board.The subsequent soldering process fuses the solder paste particles with the PCBs and component contacts.The melting process is facilitated by the surface tension-reducing flux.Technical dataWidth: 60 mmHeight: 25 mmLength: 60 mm
€1.95

Sofort verfügbar · 9 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

NeoPixel ring with 16 WS2812 5050 RGB LEDs
This small, intelligent RGB LED ring with 16 WS2812 LEDs can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data: Operating voltage: 4 - 7 V LED dimensions: 5 x 5 x 1.50 mm Outer diameter: approx. 67.95 mm Diameter inside: approx. 54.05 mm Height: approx. 2.80 mm Note: The components and circuit boards shown are for presentation purposes only and are not included in the scope of delivery! You are only purchasing the NeoPixel ring. Please note that the illustrations are similar.
€4.80

Sofort verfügbar · 73 Stück · 1-3 days

Produktgalerie überspringen

Mehr von Elecrow

Elecrow 2.4G WiFi-Antenne, 4dBi, 50 Ohm, Frequenz 2400-2500 MHz, -40°C bis +65°C
€0.90

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow 8mm waterproof Android OTG endoscope HD CMOS camera, 6 LED lights, 5m cable, IP67
€14.90

Artikel aktuell nicht lieferbar

%
Elecrow aircraft lighting system with Attiny85 microcontroller, LED navigation lights, 5V
€21.90 €24.90 (12.05% gespart)

Sofort verfügbar · 1 Stück · 1-3 days

Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20 mm, black
€3.90

Sofort verfügbar · 18 Stück · 1-3 days

Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20mm, silver
€3.90

Sofort verfügbar · 3 Stück · 1-3 days

Elecrow ATtiny digital cube key fob, decision aid, RGB LEDs
€24.90

Artikel aktuell nicht lieferbar

Elecrow Automatic Plant Watering Kit 2.1, Arduino based, for up to 4 plants
€64.90

Artikel aktuell nicht lieferbar

Elecrow Can-Bus Shield, Arduino Mega/Leonardo compatible, CAN V2.0B, 9-pin Sub-D, Micro-SD, V1.5
€7.90

Artikel aktuell nicht lieferbar

Elecrow CQA240327P Lora RFM95 IOT Board für RPI, Crowtail, 915MHz, 20dBm, LoRa Modem, I2C, 120mA, 5V
€8.90

Artikel aktuell nicht lieferbar

Durchschnittliche Bewertung von 4 von 5 Sternen

Elecrow CrowPanel E-Paper HMI Display, 1.54 inch, 152x152 resolution, ESP32-S3, SPI, black and white
€16.90

Sofort verfügbar · 36 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 2.13 inch, 122x250 resolution, ESP32-S3, SPI, black and white
€17.90

Sofort verfügbar · 21 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI display, 2.9 inch, 128x296 resolution, ESP32-S3, SPI, black and white
€23.90

Artikel aktuell nicht lieferbar

Elecrow CrowPanel E-Paper HMI Display, 3.7 inch, 240x416 resolution, ESP32-S3, SPI, black and white
€30.50

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 4.2 inch, 400x300 resolution, ESP32-S3, SPI, black and white
€36.90

Sofort verfügbar · 3 Stück · 1-3 days

Elecrow CrowPanel E-Paper HMI Display, 5.79 inch, 272x792 resolution, ESP32-S3, SPI, black and white
€37.90

Artikel aktuell nicht lieferbar

Elecrow CrowPi L Base Shield, GPIO-Schnittstelle, ADC-Chip, SPI, Acrylgehäuse, für Crowtail-Module
€11.90

Sofort verfügbar · 10 Stück · 1-3 days

Elecrow CrowPi L Raspberry Pi Laptop, 11,6 Zoll Display, 40-Pin GPIO, 5000mAh Akku, ohne Pi, QWERTY
€249.90

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Base Shield 2.0 for Arduino, I2C UART Analogue Digital, 4-Pin JST, 3.3-5V
€4.50

Sofort verfügbar · 10 Stück · 1-3 days

Elecrow Crowtail Base Shield 2.0 for Raspberry Pi, UART I2C Analogue Digital, MCP3008
€6.90

Sofort verfügbar · 29 Stück · 1-3 days

Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable for modules, 20.5 cm, 5 pieces
€1.50

Sofort verfügbar · 73 Stück · 1-3 days

Elecrow Crowtail Collision Sensor 2.0, contact sensor for collision detection, JST-PH 4-pin, 3.3-5V
€1.60

Sofort verfügbar · 11 Stück · 1-3 days

Elecrow Crowtail connector JST-PH 2.0, 4-pin, 2.0mm pitch, without cable, 10 pieces
€1.00

Artikel aktuell nicht lieferbar

Elecrow Crowtail encoder 2.0, incremental encoder, 20 pulses/revolution, JST-PH 4-pin, 5.0V
€2.50

Artikel aktuell nicht lieferbar

Elecrow Crowtail gas sensor MQ3, alcohol gas detection, analogue output, JST-PH 2.0 4-pin, 3W, 5V
€5.90

Sofort verfügbar · 4 Stück · 1-3 days

Elecrow Crowtail infrared sensor, adjustable, 3-50cm detection, JST-PH 2.0 4-pin, 100mA, 5V
€6.50

Sofort verfügbar · 9 Stück · 1-3 days

Elecrow Crowtail laser pointer 2.0, compatible with Crowtail base module, 5mW, 650nm wavelength
€1.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail Logic Block 2.0, 4-pin JST, 3.3V-5V
€2.50

Sofort verfügbar · 15 Stück · 1-3 days

Elecrow Crowtail MOSFET 2.0, fan control, switching voltage 5-50V DC, control voltage 5V
€1.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail NFC 2.0, RFID reader and NFC module with PN532, 13.56 MHz, UART and IIC protocol
€13.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Protoboard 2.0, breadboard, 4-pin cable, S0 S1 VCC GND, 2.54mm pitch
€0.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail Relay 2.0, JST-PH 4-pin, SPST, 5V control, 30A switching capacity, 240VAC, 30VDC
€1.90

Artikel aktuell nicht lieferbar

Elecrow Crowtail RGB LED 2.0, 4x WS2812B, addressable, cascadable, JST-PH 2.0, 5V
€1.90

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow Crowtail RTC module DS1307, calendar function, I2C, JST-PH 4-pin connector, 5V
€2.70

Artikel aktuell nicht lieferbar

Kunden kauften auch
Adafruit MEMENTO, DIY camera motherboard, ESP32-S3, 5MP OV5640, MicroSD slot, USB-C
MEMENTO - Python programmable DIY camera - motherboard only The MEMENTO camera motherboard from Adafruit allows you to develop camera-based projects. This board is equipped with a camera module, TFT preview screen, buttons, SD card slot and is powered by a powerful ESP32-S3 with 2 MB PSRAM that can buffer 5 megapixel camera images. Features at a glance Versatile programming: Supports Arduino and CircuitPython, ideal for fast development cycles. Compact design: Dimensions of only 63.6 mm x 63.3 mm x 13.0 mm and a weight of 29g. Advanced camera functions: 5MP OV5640 camera module with 72 degree viewing angle and autofocus. Technical specifications ESP32-S3 module with 8 MB Flash, 2 MB PSRAM - Dual-Core 240MHz Tensilica with WiFi and BTLE. 1.54" 240x240 colour TFT - for previewing camera images or designing the user interface. MicroSD card slot - storage of images or animations on any SPI-capable micro SD card. Two Digital/Analogue Stemma Ports - JST PH-3 connectors for A0, A1 and Power+Ground for external buttons, LEDs or sensors. I2C Stemma QT Port - Connect virtually any I2C sensor via a Stemma QT JST SH port, providing 3.3V power and logic. LIS3DH Accelerometer - Triple access accelerometer can detect orientation, shake or motion. Support for LiPoly battery charging - Use a 3.7/4.2V 350mA or 420mA battery for travelling. USB Type C for programming the ESP32-S3 as well as REPL access in CircuitPython and charging the optional LiPoly battery. Buzzer - Play sounds or sound alarms, or indicate when a photo has been successfully taken. Analogue microphone - Can be used as a sensor to detect loud noises, not to record video with audio. Trigger - Connected to GPIO 0 to access the ROM bootloader. Reset Button - Used to access the bootloader or reboot. On/Off switch - Switches off all power sources when a battery is used. Through-hole pads for hardware UART - for more intensive debugging requirements, attach solder wires to the through-hole pads to connect to a console cable. Four M3 spacers for mounting or housing attachment. Scope of delivery 1x MEMENTO camera motherboard Instructions Housing, LED ring, hardware, SD card or battery are not included!
€34.80

Sofort verfügbar · 1 Stück · 1-3 days

Adafruit MEMENTO camera housing kit, minimalist design, RGBW LED ring, black
Adafruit MEMENTO Camera Housing & Hardware Kit A stylish and minimalist housing for the MEMENTO camera, perfect for fashion shots and street photography. Includes RGBW LED ring for cool lighting effects. Features at a glance Chic, minimalist design: Ideal for the catwalks of Paris or street photography in New York City. RGBW LED ring: Equipped with 8 bright NeoPixels for impressive lighting effects. Quick installation: Can be installed in less than five minutes with a Phillips screwdriver (not included). Other data Nylon nuts and screws are placed between the front panel and mainboard PCB to protect the TFT display and microphone. Scope of delivery 1 x Adafruit MEMENTO camera LED ring front panel 1 x Adafruit MEMENTO back plate 4 x M3 black nylon nuts 8 x M3 black nylon screws 1 x 3-pin JST cable 1 x adhesive sticker Notes The Adafruit MEMENTO main camera board, micro SD card, screwdriver and 420mAh battery are not included.
€9.50

Sofort verfügbar · 3 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

Adafruit small induction coil with 10 wireless LEDs, 5V
If you add LEDs, everything gets 5x better - that's a scientific fact! But if you have LEDs, you need wires and power and all that stuff is kind of a pain. What if you could have LEDs that light up without wires, solder joints or batteries? Sounds magical! That's what makes this kit of a small inductive coil and 10 wireless LEDs so nifty. It uses electromagnetic fields and inductive coupling to conduct electricity through the air and light up the LEDs soldered onto the coils. Each order contains a driver board (you need a 5 V power supply to power it) and ten miniature LED inductors in different colours (two each in white, blue, yellow, green and red). Inductive charging is a way of supplying power to a device without a direct cable connection. Most people are familiar with inductive charging from a rechargeable electric toothbrush: you may have noticed that you charge it by plugging it into the holder, but there is no direct plug. These chargers work by taking a transformer and splitting it in half. In this product, we have a small coil that forms the "primary" side of the charger. Then each individual LED has a smaller coil on the back. When the two are coupled, the current is transferred from the coil to the LED and it lights up. You can have a large number of LEDs that are all in a different 3D space above or below the coil. You can also orientate them differently, but you get the best efficiency/current transfer when the two coils are on top of each other. You can also arrange the LEDs slightly outside the main ring, but even then they won't shine as brightly as in the centre. They are often used for modelling, toy designs or displays, but we think they also have a lot of potential for art, craft or cosplay. The coil is quite small, so you have about 1 to 3 inches of vertical space to work with. These are simple modules for which we have no data sheets or specifications. Technical data Voltage: 5V Sensing range: 0 - 80mm Module size: 16 x 12 x 2.5mm Outer diameter of the coil: 70mm, inner diameter: 65mm, thickness: 0.5mm
€16.45

Sofort verfügbar · 8 Stück · 1-3 days

Adafruit Perma-Proto breadboard PCB, 1/2 size, 3-pack
Customers have asked us to stock basic perf boards, but we never liked the look of most basic perf: it's always poor quality, with pads that flake off and no labelling. Then we thought about how people actually prototype - they usually start with a solderless breadboard and then transfer the parts to a permanent PCB. That's when we realised what people really want is a proto-board that makes it easy! This proto-board is the PCB you've always wanted but never realised! We've taken the basic layout of a reasonably sized breadboard and turned it into a beautiful PCB. The top side has a white silkscreen and the same markings you are familiar with to make transferring components easy. The bottom has the 5-hole pad design that fits a classic breadboard, with 4 power bus lines on the sides and no mask so you can easily cut traces if needed. We have used 1.2mm diameter holes so that components with large leads will also fit. All holes are plated through for reinforcement - these will not come off during rework. The surface is gold-plated - you won't get oxidation like with bare copper perf! There are also two mounting holes so you can attach the board to your project box. They also fit well in an Altoids-sized mint tin These boards are so practical that we have decided to offer them in a 3-pack. Once you've used a Perma-Proto board, you'll never go back! Technical data 30 rows with double 5-hole rows 4 power rails with positive/negative markings 3.2" x 2.0" (81mm x 51mm), 0.063" thick FR4 1.2mm / 0.047" drill holes 2 x 0.125" or 3.2mm mounting holes spaced 2.9" apart
€13.75

Sofort verfügbar · 8 Stück · 1-3 days

Adafruit Perma-Proto breadboard PCB, 1/4 size, 3-pack
Adafruit Perma-Proto Breadboard PCB, 1/4 size, 3-pack Customers have asked us to stock basic perf boards, but we never liked the look of most basic perf: it's always lousy quality, with pads that flake off and no labelling. Then we thought about how people actually prototype - they usually start with a solderless breadboard and then transfer the parts to a permanent PCB. That's when we realised what people really want is a proto board that makes it easy! Features at a glance The basic layout of a quarter-sized breadboard with power rails White screen printing with familiar markings for easy transfer of components 5-hole pad design that fits a classic breadboard 4 power supply lines on the sides Holes with a diameter of 1.2 mm, suitable for components with large leads Gold-plated surface for oxidation protection Two mounting holes for easy installation in project boxes Technical data 15 rows with double 5-hole rows 4 busbars with plus/minus markings Dimensions: 1.7" x 2.0" (44mm x 55mm), 0.063" thick FR4 Drill holes: 1.2mm / 0.047" Mounting holes: 2 x 0.125" or 3.2mm, 1.4" apart Other data High quality design to prevent detachment and damage Perfect for permanent prototypes and DIY projects What's included 3-pack of Adafruit Perma-Proto breadboard PCBs
€9.35

Sofort verfügbar · 4 Stück · 1-3 days

DC Toy / Hobby Motor - 130-Size
These are standard "130" size DC hobby motors. They have a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you have 5 or 9V available rather than a high current setting of 3V. They will fit most electronics that already have size 130 motors installed, and there are two breadboard-friendly wires already soldered on for quick prototyping.
€2.15

Sofort verfügbar · 35 Stück · 1-3 days

Durchschnittliche Bewertung von 5 von 5 Sternen

CD DVD spindle motor
CD DVD spindle motor This CD/DVD spindle motor is the component in a CD or DVD player that spins the disc quickly. These motors offer several advantages over the '130' hobby DC motors: they are flat at the end, easy to mount on a flat surface, well balanced and quiet. They rotate at around 3500 rpm at full power and can be PWM controlled to reduce speed. With a maximum current consumption of 400 mA at standstill and a rated voltage of 5.9V, they are versatile. The motor already has a plastic hub so that something can be easily attached to it. A motor driver is required for control. We recommend CRICKIT for simple motor control, but the Adafruit Motor Shield for Arduino, the Motor HAT for Pi, Motor FeatherWing, L293D, TB6612 or DRV8833 are also suitable. Features at a glance Flat end for easy mounting Well balanced and quiet Fast rotation with 3500 rpm at full power Technical specifications Maximum voltage: 5.9V Motor diameter: ~22mm Spindle diameter: 30mm Product weight: 22.4g / 0.8oz No-load current: 20 mA Standstill current: 400 mA Other data Recommended motor controllers: CRICKIT, Adafruit Motor Shield, Motor HAT, Motor FeatherWing, L293D, TB6612, DRV8833 Scope of delivery 1x CD/DVD spindle motor Link toDatasheetCRICKIT for simple motor control
€2.15

Sofort verfügbar · 66 Stück · 1-3 days