DFRobot D80mm silicone wheel single, compatible with TT Geared DC motors, high-quality ABS wheel hub

Name: DFRobot D80mm silicone wheel single, compatible with TT Geared DC motors, high-quality ABS wheel hub
Brand: DFRobot
SKU: FIT0500
Price: 1.8 EUR
Availability: LimitedAvailability

Produktnummer: FIT0500

€1.80

Jetzt Bestellen und
1 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

Produkt-Zubehör direkt mitbestellen

DFRobot TT geared motor with encoder, 120:1 gear ratio, 160RPM, 0.8kgcm torque, 6V

€6.90*

DFRobot TT Micro DC geared motor, reverse shaft, 160rpm, compatible with DFRobot encoder, 6V

€2.70*

Sofort verfügbar · 4 Stück · 1-3 days

Menge prüfen

Sofort verfügbar

4 Stück : 1-3 days

99% positive Bewertung

Kostenloser Versand ab 79€*

Support

Wird oft zusammengekauft

Produktinformationen "DFRobot D80mm silicone wheel single, compatible with TT Geared DC motors, high-quality ABS wheel hub"

D80mm silicone wheel for TT motor (single)
This silicone wheel designed by DFRobot has a wheel hub made of high-quality ABS material and a tyre made of silicone. A proper wheel is always the first thing you should pay attention to when building your own robot. A nice looking and soft tyre will make your robot project great and look stunning.

Features at a glance

High quality ABS wheel hub: For increased durability and stability.
Silicone tyre: Soft tyre for better grip and aesthetic look.

Compatibility

Compatible with TT Geared DC motors or TT Geared DC motors with encoders

Technical specifications

Outer diameter: 80 mm
Tyre width: 17 mm
Hole size of the shaft: 5.4 mm in diameter, 3.1 mm thick
Weight: 40 g

Scope of delivery

1x D80mm silicone wheel (single)
2x M3x12 self-tapping screw
2x M3x12 screw

Zolltarifnummer:	39269097
Brand:	DFRobot
Country of Origin:	China
Gross Weight (kg):	0.100
Manufacturer ID:	FIT0500
Product ID:	FIT0500

Manufacturer information
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

WEEE number: 20453810

Person responsible for the EU
See manufacturer information

Safety instructions

Read the operating instructions in full before use.
Disconnect the power supply before maintenance or installation.
Only use components within the intended voltage or power range.
Protect components from moisture, extreme temperatures and dust.
Not suitable for use in safety-critical applications.
Dispose of defective components properly; dispose of electronic components as electronic waste.
Protect small parts and cables from children and unauthorised persons.
Handle sharp edges and moving parts with care, risk of injury.
Avoid static discharge during installation by earthing.
Dispose of in accordance with the applicable local regulations.

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Zubehör

DFRobot TT geared motor with encoder, 120:1 gear ratio, 160RPM, 0.8kgcm torque, 6V

DFRobot TT Geared Motor with Encoder (6V 160RPM 120:1 L-shape) This is the DFRobot TT Micro DC geared motor with encoder. It is equipped with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 8 pulses per revolution, allowing a maximum output of 960 pulses per revolution. With an Arduino controller and motor driver, applications such as closed loop PID or PWM motor speed control are possible. This motor is an ideal option for mobile robot projects. The copper output shaft, the built-in thread and the reinforced connection significantly extend the service life of the motor. The encoder connection is compatible with DFRobot's Gravity interface. Features at a glance 120:1 gearbox: Provides high torque and low speed. Integrated quadrature encoder: Provides a high resolution of 8 pulses per revolution. Compatible with Arduino controller and motor driver: Enables closed loop PID and PWM motor speed control. Copper output shaft and reinforced connection: Increases the service life of the motor. Technical specifications Transmission ratio: 120:1 Idle speed at 6V: 160 rpm No-load speed at 3V: 60 rpm No-load current at 6V: 0.17A No-load current at 3V: 0.14A Max. Blocking current: 2.8A Max. Blocking torque: 0.8kgf.cm Rated torque: 0.2kgf.cm Encoder operating voltage: 4.5~7.5V Motor operating voltage: 3~7.5V (rated voltage 6V) Operating temperature: -10~+60℃ Weight: 50g Scope of delivery 1x Micro DC motor with encoder-SJ02 1x JST 2-pin motor cable 1x JST 4-pin encoder cable Documentation / Downloads Product Wiki Motor Dimension Drawing SolidWorks File

€6.90

Sofort verfügbar · 4 Stück · 1-3 days

DFRobot TT geared motor with encoder, 120:1 gear ratio, 160RPM, 0.8kgcm torque, 6V

FIT0458

€6.90

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot TT Micro DC geared motor, reverse shaft, 160rpm, compatible with DFRobot encoder, 6V

DFRobot TT Geared Motor with Reverse Shaft (160rpm 6V L-Shape) This is a TT Micro DC geared motor with reverse shaft that operates at 160rpm at 6V. The TT motor series is the most popular DC motor series among DIY enthusiasts. It is designed so that the DFRobot encoder can be easily integrated. These motors are cost-effective, small, easy to install and ideal for use in a mobile robot. Features at a glance Integratable return shaft: Enables easy integration of the DFRobot encoder. Popular with DIY enthusiasts: Ideal for mobile robot projects. Compatibility Compatible with the DFRobot encoder Technical specifications Operating voltage range: 3~7.5V Nominal voltage: 6V Max. No-load current (3V): 140 mA Max. No-load current (6V): 170 mA Idle speed (3V): 90 rpm Idle speed (6V): 160 rpm Max. Output torque: 0.8 kgf.cm Max. Blocking current: 2.8 A Rated load: 0.2 kgf.cm Operating temperature: -10~+60 °C Storage temperature: -30~+85 °C Motor type: 130 Output mode: 2 sides Transmission ratio: 1:120 Max. Output shaft diameter: 5.4 mm Net weight: 45 g Scope of delivery 1x Micro DC Geared Motor with back shaft

€2.70

Sofort verfügbar · 5 Stück · 1-3 days

DFRobot TT Micro DC geared motor, reverse shaft, 160rpm, compatible with DFRobot encoder, 6V

FIT0016

€2.70

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Kunden kauften auch

DFRobot TT motor with encoder, 160RPM, 120:1 gear ratio, 0.8kgcm torque, 0.17A no-load current, 6V

DFRobot TT Motor with Encoder (6V 160RPM 120:1) This is the DFRobot TT Micro DC geared motor with encoder. It is equipped with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 8 pulses per revolution, allowing a maximum output of 960 pulses per revolution. With an Arduino controller and motor driver, applications such as closed loop PID or PWM motor speed control are possible. This motor is an ideal option for mobile robot projects. The copper output shaft, the built-in thread and the reinforced connection significantly extend the service life of the motor. The encoder interface is compatible with DFRobot's Gravity interface. Features at a glance 120:1 gearbox: Provides high torque and low speed. Integrated quadrature encoder: Provides a high resolution of 8 pulses per revolution. Compatible with Arduino controller and motor driver: Enables closed loop PID and PWM motor speed control. Copper output shaft and reinforced connection: Increases the service life of the motor. Technical specifications Transmission ratio: 120:1 Idle speed at 6V: 160 rpm No-load speed at 3V: 60 rpm No-load current at 6V: 0.17A No-load current at 3V: 0.14A Max. Blocking current: 2.8A Max. Blocking torque: 0.8kgf.cm Rated torque: 0.2kgf.cm Encoder operating voltage: 4.5~7.5V Motor operating voltage: 3~7.5V (rated voltage 6V) Operating temperature: -10~+60℃ Weight: 50g Scope of delivery 1x Micro DC motor with encoder-SJ01 1x JST 2-pin motor cable 1x JST 4-pin encoder cable Product documentation Product Wiki Motor Dimension Drawing SolidWorks File

€7.30

Sofort verfügbar · 19 Stück · 1-3 days

DFRobot TT motor with encoder, 160RPM, 120:1 gear ratio, 0.8kgcm torque, 0.17A no-load current, 6V

FIT0450

€7.30

Sofort verfügbar · 19 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

ESP32 NodeMCU Development Board

NodeMCU development board: Affordable and versatile for IoT projects The NodeMCU development board, based on the Espressif ESP-32 / ESP-WROOM-32 chipset, is a cost-effective solution to easily get started with the development of IoT projects. It is ideal for beginners and hobby developers looking for uncomplicated internet connection, data transmission and networking of devices. Features at a glance Open source development board Based on Espressif ESP-32 / ESP-WROOM-32 chipset Integrated WLAN and Bluetooth 38 pins including GPIO, ADC, PWM, SPI, I2C, UART CP2102 USB-Serial chipset for easy programming Technical specifications Chipset: ESP-WROOM-32 USB serial chipset: CP2102 Pins: 38 pin version Communication interfaces: SPI, I2C, UART Special functions: ADC, PWM Wide range of project applications The board is ideal for smart home devices, radio-based sensor networks, wireless communication devices and other IoT applications. Its flexible pin configuration makes it possible to control and monitor a wide range of devices. Scope of delivery 1x NodeMCU development board (38 pin version) To the BerryBase Blog

€6.80

Sofort verfügbar · 100+ Stück · 1-3 days

Neu

ESP32 NodeMCU Development Board

NMCU-ESP32

€6.80

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

NodeMCU v3 - ESP8266 Development Board, CH340G

NodeMCU development board: Open-source and versatile for IoT projects The NodeMCU is an open-source firmware and development kit that enables rapid prototyping of your IoT products with just a few lines of Lua script. It combines ease of use with powerful hardware to provide an ideal platform for innovative IoT projects. Features at a glance Open source: Freely available firmware and development environment Interactive and programmable: Enables the development of dynamic IoT applications Cost-effective and simple: Low entry barriers for hobbyists and professionals Smart: Supports complex applications and networking WLAN-capable: Enables connection to the internet Breadboard-friendly: Easy integration into prototypes Technical specifications Controller: ESP8266, 80 MHz, 32-bit RISC CPU Memory: 96kB RAM, 4MB Flash Connection: Micro-USB, integrated WLAN antenna Connections: 10 GPIO pins, each pin supports PWM, I2C, 1-Wire 1 ADC (10Bit), CH340G USB chipset Dimensions: approx. 60 x 31 x 13 mm, weight: 10g Scope of delivery 1x NodeMCU development board with ESP8266, USB-TTL included To the BerryBase Blog

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

NodeMCU v3 - ESP8266 Development Board, CH340G

NMCUV3

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

Black multi-stroke wheel for TT / Lego or N20 motor - 65mm diameter This multi-stroke wheel is solid, a little chunky, but it won't make your robot unwieldy. It even comes in Adafruit black! Each order includes one wheel and two different sized hubs to allow for quick and easy connection. The hubs may be attached to the wheel with some plastic burrs, so you should be able to cut them off with diagonal pliers or twist them out. The real secret of this wheel is that it can be used with a wide range of motors! Compatible with TT motors, 'N20' DC geared motors and LEGO cross pieces. This really is a universal wheel for any purpose. Features at a glance Solid and slightly chunky without making the robot unwieldy Quick and easy connection thanks to two different sized hubs Universal compatibility with TT motors, 'N20' DC geared motors and LEGO crosspieces Technical data TT motor/LEGO stroke: 5.4 x 3.5mm DC/N20 geared motor stroke: 2.8mm diameter Other data Colour: Adafruit black Diameter: 65mm Scope of delivery 1x multi-stroke wheel (black) 2x hubs of different sizes Notes Diagonal pliers recommended for removing the plastic burr

€2.15

Sofort verfügbar · 14 Stück · 1-3 days

Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

ADA4205

€2.15

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Short pin header kit for feather, 12-pin and 16-pin female headers

These two female headers are, well, lonely on their own. But combine them with one of our Feather Boards and you're ready to fly! These headers are particularly cute and tiny. With a housing height of just 5.0 mm, they are the best way to minimise the space required for your Feather project while still retaining the flexible configuration. "Normal" female headers have a housing height of 8.5 mm, so you save a whole 3.5 mm (that adds up!). For ultimate slimness, you can combine these female headers with equally short male headers. You can use the male bushing strips that come with your Feathers, but you may need to shorten the male bushing strips of your Featherwings by a few mm, so be aware of this! What are they for? They are soldered to both sides of the Feather board. Now you can plug in FeatherWings to extend your portable project. Unlike our Feather Stacking Headers, they are not designed for 'stacking', but they are much more compact. Note: A 12-pin and a 16-pin header are included, a Feather is not included.

€1.65

Sofort verfügbar · 22 Stück · 1-3 days

Short pin header kit for feather, 12-pin and 16-pin female headers

ADA2940

€1.65

Sofort verfügbar · 22 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Seeed XIAO ESP32C3, tiny MCU board with WLAN and BLE

The Seeed Studio XIAO ESP32C3 has a complete WiFi system and Bluetooth Low Energy function. With its exquisite design and WiFi+BT capability, it is perfect for various IoT control scenarios and complex mobile applications. Features Outstanding RF performance: The powerful ESP32-C3 SoC and U.FL antenna support WiFi/Bluetooth connections over 100m. Thumb-sized design: 21 x 17.5 mm overall dimensions, portable and lightweight. Low power consumption: Lower than 44 μA (deep sleep mode), with 4 available working modes. Built-in battery charging IC: Supports battery charging, ideal for various wearable scenarios and wireless IoT applications. Ready for product development: Single-sided component design, easy to integrate with other boards and Seeed provides fusion service for fast production. The Seeed Studio XIAO ESP32C3 is equipped with a highly integrated ESP32-C3 chip based on a 32-bit RISC-V chip processor with a four-stage pipeline running at up to 160 MHz. The board features a highly integrated ESP32-C3 SoC. The chip has a complete 2.4 GHz WLAN subsystem, i.e. it supports station mode, softAP mode, softAP & station mode and promiscuous mode for multiple WLAN applications. It operates in ultra-low power mode and also supports Bluetooth 5 and Bluetooth Mesh functions. The chip has 400 KB SRAM and 4 MB Flash, providing more programming space and more possibilities for IoT control scenarios. As a member of the Seeed Studio XIAO family, the board retains the classic thumb-sized design and elegant single-sided component mounting. It is also equipped with a battery charging chip and an integrated circuit to improve its portability. This board comes with an external antenna to increase signal strength for wireless applications. It has 11 digital I/O that can be used as PWM pins and 4 analogue I/O that can be used as ADC pins. It supports UART, IIC and SPI serial communication interfaces and has IIS (Internet Information Services). With its small and exquisite hardware design and powerful onboard chip programmed by Arduino, it offers more possibilities for portable devices and other applications. To help beginners learn, we have prepared a free course based on the Starter Kit for Seeed Xiao, which contains 4 units and 16 lessons to help you get started quickly with development boards so that you can then realise small and individual fun projects. You can access the Seeed Studio Grove ecosystem by connecting it to the compatible Seeed Studio XIAO expansion board. We have developed more than 400 Grove modules covering a wide range of applications that can fulfil different needs. Get started and discover the endless possibilities of the Seeed Studio XIAO series! If you're interested in embedded machine learning programming, we have the visual programming codecraft to help you quickly start your own TinyML project. And we've set up a #tinyml channel on our Discord server. Click here to tinker, share, discuss and help each other 24 hours a day, 7 days a week.

€8.40

Sofort verfügbar · 31 Stück · 1-3 days

Seeed XIAO ESP32C3, tiny MCU board with WLAN and BLE

SE-113991054

€8.40

Sofort verfügbar · 31 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Elecrow ESP8266 ESP-01/ESP-01S Relay WiFi module, 10A/250VAC, 400m range, IoT Smart Home, 5-12V

ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino Discover the ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino, a high-performance solution to make your devices smart and controllable. With this module, you can easily control any device in your home or project via smartphone. It is based on the reliable AI-Thinker ESP-01/01S WiFi module and uses its GPIO0 for efficient low-level relay control.The module supports an impressive transmission distance of up to 400 metres in an open environment and allows you flexible control even over long distances. It is ideal for DIY projects, IoT applications and smart home solutions, where it impresses not only with its simplicity but also with its versatility. The module also supports both APP and LUA programming, allowing it to be seamlessly integrated into your projects. With a maximum load of 10A at up to 250VAC or 30VDC, the ESP8266 ESP-01/ESP-01S covers a wide range of use cases, making it the perfect choice for your smart control needs. Features at a glance Simple DIY solution: Turn any device into a smart switch with your smartphone Long transmission distance: The maximum transmission distance is 400m (open environment, smartphone with WiFi module). Versatile application: Ideal for smart homes, IoT and other DIY projects. Supports APP and LUA source code. Technical specifications Working voltage: DC 5V-12V Working current: ≥250mA Communication: ESP01 or ESP 01S WiFi module Size: 37 x 25mm Transmission range: 400m Power load: 10A/250V AC 10A/30V DC 10A/28V DC Scope of delivery 1x ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino Links to Manual & Support

€1.30

Sofort verfügbar · 74 Stück · 1-3 days

Elecrow ESP8266 ESP-01/ESP-01S Relay WiFi module, 10A/250VAC, 400m range, IoT Smart Home, 5-12V

ESP11002R

€1.30

Sofort verfügbar · 74 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Elecrow DIY gear kit, 60 gears, 0.5 module, ABS plastic, gear racks, worm belts

Gear kit for DIY/model accessories This gear kit contains 60 different types of gears with a module of 0.5. The set includes gears for shafts (102A), copper gears and gears with a diameter of 2.3 mm and 3.17 mm. Racks, worms and belts are also included. The gears are made of ABS plastic and fulfil all requirements for DIY projects. With these gears, you can make many toy models yourself or replace missing parts on existing models. Features at a glance Contains 60 different types of gears Made from robust ABS plastic Ideal for DIY projects and modelling Includes gear racks, worms and belts Compatibility Suitable for DIY toy models and modelling projects Technical specifications Module: 0.5 Material: ABS plastic Gear sizes included: 2.3 mm and 3.17 mm Other data Shaft gears 102A included Contains copper gears Scope of delivery 8x single gears 10x spindle gears 12x double gears 7x pulleys 9x crown gears 2x blue motor gears 4x belts 3x bushes 2x worms 1x gear racks 1x copper gears 1x bevel gears

€1.50

Sofort verfügbar · 2 Stück · 1-3 days

Elecrow DIY gear kit, 60 gears, 0.5 module, ABS plastic, gear racks, worm belts

DIY27990G

€1.50

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Heat shrink tubing set, 560 pieces in assortment box, red / black

The practical all-rounders in a universal set! The tubes shrink when heat is generated. Perfect as cable insulation for modelling, computer or hi-fi applications. Also ideal as a quick repair kit for electrical cables and components. In a handy storage box. - Length 45mm each - Shrink rate 2:1 - 50% each in black and red - in practical assortment box - 20x Ø13mm - 24x Ø10mm - 24x Ø7mm - 26x Ø6mm - 26x Ø5mm - 40x Ø4mm - 50x Ø3,5mm - 50x Ø3mm - 70x Ø2,5mm - 70x Ø2mm - 70x Ø1,5mm - 90x Ø1mm - Scope of delivery: Heat shrink tubing assortment

€6.80

Sofort verfügbar · 14 Stück · 1-3 days

Heat shrink tubing set, 560 pieces in assortment box, red / black

T1535286

€6.80

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Waveshare RP2040-GEEK development board: 1.14 inch 65K colour LCD display, USB debugging

Waveshare RP2040-GEEK development board: Based on the RP2040 microcontroller, with 1.14 inch 65K colour LCD, USB debugging downloader, with white plastic housing The RP2040-GEEK from Waveshare is a development board for geeks, equipped with a USB-A interface, 1.14 inch LCD screen, TF card slot and other peripherals. It offers different firmware for SWD port, UART port and I2C port. Features at a glance RP2040 microcontroller chip developed by Raspberry Pi in the UK Onboard 3PIN SWD port to connect to the target board to be debugged Standard CMSIS-DAP interface for debugging most ARM-based microcontrollers Compatible with OpenOCD and other tools that support CMSIS-DAP Onboard 3PIN USB to UART bridge Onboard 4PIN I2C port for testing the target board Onboard 1.14 inch 240×135 pixel 65K colour IPS LCD display Equipped with a plastic housing and cables Open source firmware for easy upgrades Technical specifications USB-A interface UART port SWD port I2C port TF card slot: Supports SDIO and SPI interface communication W25Q32JVSSIQ 4MB NOR Flash RP2040 microcontroller BOOT button Scope of delivery 1x Waveshare RP2040-GEEK development board and cable

€12.40

Sofort verfügbar · 6 Stück · 1-3 days

Waveshare RP2040-GEEK development board: 1.14 inch 65K colour LCD display, USB debugging

WS-25394

€12.40

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Mehr von DFRobot

DFRobot Aluminiumgehäuse für Raspberry Pi 5, Aluminiumlegierung, Verstellbarer Lüfter, Kühlkörper

€17.90

Sofort verfügbar · 14 Stück · 1-3 days

DFRobot Aluminiumgehäuse für Raspberry Pi 5, Aluminiumlegierung, Verstellbarer Lüfter, Kühlkörper

DFRobot Aluminiumgehäuse für Raspberry Pi 5 Dieses speziell für den Raspberry Pi 5 entwickelte Aluminiumgehäuse bietet leichte Konstruktion und hohe Festigkeit. Mit einem Aluminiumgehäuse, Kupferkühlkörpern, einem verstellbaren Lüfter und einer Acrylabdeckung mit Kühlungsöffnungen schützt es nicht nur das Motherboard, sondern gewährleistet durch automatische Anpassung der Lüftergeschwindigkeit an die Temperatur effiziente Wärmeableitung und Stabilität bei Hochleistungsoperationen. Merkmale im Überblick Hervorragende Wärmeableitungsleistung: Doppelte Wärmeableitung mit Kühlkörper und Kühlventilator. Einfacher Zusammenbau: Das Kit lässt sich leicht montieren. Technische Daten Material: Aluminiumlegierung Kompatibilität: Raspberry Pi 5 4GB/8GB Gewicht: 150g Abmessungen: 95 x 63 x 45 mm Sonstige Daten Installationsanleitung für das Aluminiumgehäuse und den Raspberry Pi 5 Einplatinencomputer verfügbar. Lieferumfang 1x Aluminiumgehäuse für Raspberry Pi 5 4x Kupferkühlkörper 1x Schraubenpaket 2x 3M Klebeband 1x Kreuzschlitzschraubendreher 1x Innensechskantschlüssel

FIT0962

€17.90

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Micro Metal Gearmotor 30:1, 700RPM, 1.2kgcm torque, 55mA no-load current, 6V

€6.60

Sofort verfügbar · 5 Stück · 1-3 days

DFRobot Micro Metal Gearmotor 30:1, 700RPM, 1.2kgcm torque, 55mA no-load current, 6V

DFRobot Micro Metal Gearmotor 30:1 This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that fits the 42x19mm and 32x7mm Pololu wheels. The brass front plate has two mounting holes designed for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). Alternatively, you can use the mounting rail or the extended mounting rail, which are specifically designed to securely mount the gearmotor and enclose the exposed gears. We recommend the extended mounting rail for wheels with recessed hubs, such as the 42×19 mm wheel. This motor is suitable for use in the mini mobile platform. On the 2-wheel MiniQ platform, it can work directly with the MiniQ robot chassis encoder, mounting rail and directly compatible wheels. Features at a glance Long D-shaped metal output shaft: Fits Pololu wheels 42x19mm and 32x7mm. Mounting holes: For M1.6 screws or mounting rail. Suitable for mini mobile platforms: Can work directly with the MiniQ robot chassis encoder and compatible wheels. Technical specifications Working current: 3 or 6 volts 15000 rpm at 6V idle Gear ratio: 30:1 700 rpm ±10% at 6V under load No-load current: 55mA at 6V Current consumption at blocking: 700mA at 6V Torque: 1.2kg/cm at 6V Scope of delivery 1x Micro Metal Gearmotor 30:1 Documentation Dimensions

FIT0302

€6.60

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFPlayer Pro, mini MP3 player with integrated 128MB memory

€9.90

Sofort verfügbar · 20 Stück · 1-3 days

DFPlayer Pro, mini MP3 player with integrated 128MB memory

Here comes the DFPlayer Pro - a small, simple but powerful MP3 player! This MP3 player module supports four control modes: Arduino, AT command, on-board buttons and ADKEY. You can directly press the on-board button to play or switch music without using a controller. This playback module also has 128 MB of memory. With a USB cable, you can easily copy your favourite songs to this module to play them anywhere, or use it as a sound card for your PC or Raspberry Pi after connecting them. Features Built-in 128MB high-speed memory One button playback switch Dual-channel Supports analogue U-Disk Specifications Power supply: 3.3V~5V Operating current: >20mA Memory: 128MB Audio format: MP3, WAV, WMA, FLAC, AAC, APE Communication: UART Operating temperature: -20℃~70℃ Operating humidity: 5%RH~95%RH Dimension: 23*24.5mm/0.91*0.96” Scope of delivery DFPlayer PRO - One MP3 player x1 2.54-6P Black Single-Row Pin x2 Product Documents Product Wiki

DFR0768

€9.90

Sofort verfügbar · 20 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot "Yuewalker" chassis

€83.25

Sofort verfügbar · 1 Stück · 1-3 days

DFRobot "Yuewalker" chassis

This is Yuewalker, a manoeuvrable caterpillar chassis, low-noise and easy to control, which could be a good partner for your armoured robots. The base of the tank is made of high-strength aluminium alloy, providing a delicate appearance, higher stability and longer durability. The crawler robot is made of engineering plastic, which ensures the product's good elasticity, excellent damping and great road grip. In addition, it is equipped with two high-quality motors that ensure high performance and speed, making your DIY robot car suitable for all types of road surfaces. To find more interesting features, you can use this caterpillar chassis with Arduino microcontrollers or add other electronic components on the base, such as IR sensors, ultrasonic sensors, cameras, LEDs, displays, WIFI modules, etc. For Arduino fans and smart robot car lovers, this can be a good choice for you! Note: The chassis is not assembled, you need to assemble it yourself - Instructions for building Specifications The package includes: Base: 1 set Motor: 2 Rail: 2 Drive wheel: 2 Driven wheel: 10 Screw accessories: 1 set Wrench: 1 Screwdriver: 1 Motor parameters: Input voltage: 12V Rotation speed: 160RPM Scope of delivery "Yuewalker" - crawler chassis x1

ROB0154

€83.25

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 18° micro stepper motor, 2-phase, 4-wire, 80g thrust, 20Ω coil resistance, 3.3-5V

€12.90

Sofort verfügbar · 9 Stück · 1-3 days

DFRobot 18° micro stepper motor, 2-phase, 4-wire, 80g thrust, 20Ω coil resistance, 3.3-5V

DFRobot 18° Micro Stepper Motor, 2-phase, 4-wire, 80g thrust, 20Ω coil resistance, 3.3-5V This 10 mm micro stepper motor offers precise movements with a step angle of 18° and is ideal for beginners in the world of stepper motors. Thanks to the 2-phase 4-wire design, it can be used directly with controllers such as Arduino, ESP32 and other microcontrollers without the need for a special driver board. An integrated metal slider on the slider rod makes it versatile for numerous applications in the smart home and automation sector. Special features Precise motion control: At 18° per step, the motor provides fine control for precise positioning. Compatibility: Works directly with Arduino, ESP32 and similar controllers - no additional hardware required. Metal slider: Ideal for applications such as automatic door locks, camera controls or DIY smart home projects. Advantages This stepper motor is characterised by its ease of use and versatility. Compared to other motors, it does not require a separate driver board, which simplifies assembly and reduces costs. The robust design, combined with a metal slider, allows it to be used in projects that require linear motion or precise control. In addition, the motor offers a maximum thrust of 80 g, making it ideal for smaller mechanisms. Possibleapplications Automatic door locks: For precise control of small mechanisms. Camera controls: For aligning or focussing camera lenses. Smart home projects: Ideal for DIY automation solutions such as blinds or small robotic arms. Educational and DIY projects: Easy handling makes it perfect for beginners and learning projects. Technical specifications Operating voltage: DC 3.3-5V Coil resistance: 20Ω ±10% Step angle: 18°/step Drive method: Bipolar drive Max. Starting frequency: 1500 PPS Min Maximum thrust force: 80 g Temperature range: -10～+60 °C Scope of delivery 1x 18° micro stepper motor

FIT0708

€12.90

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 18650 Batterie UPS HAT für Raspberry Pi 5 , 5.1V / 5A, 3A Quick Charge, I2C, 95% Effizienz

€60.50

Artikel aktuell nicht lieferbar

Details

DFRobot 18650 Batterie UPS HAT für Raspberry Pi 5 , 5.1V / 5A, 3A Quick Charge, I2C, 95% Effizienz

Raspberry Pi 5 18650 Battery UPS HAT (5.1V 5A) Dies ist ein unterbrechungsfreies Stromversorgungsmodul (UPS), das speziell für den Raspberry Pi 5 Einplatinencomputer entworfen wurde. Es kann als mobile Stromquelle genutzt werden und liefert eine stabile 5V-Ausgabe mit maximal 5A. Das verbesserte Power-Management-System kann den Stromstatus des Raspberry Pi 5 intelligent überwachen und die Stromzufuhr automatisch unterbrechen, wenn der Raspberry Pi 5 herunterfährt. Dies erhöht die Nutzungsdauer und die Lebensdauer der Batterie. Dieses UPS-Modul für den Raspberry Pi 5 schaltet sich automatisch ein, wenn der Strom wiederhergestellt wird und kann durch Software sowie I2C-Batteriepegeldetektion komplett heruntergefahren werden. Es bietet eine Schnellladefunktion mit bis zu 3A, ideal für den mobilen Einsatz in verschiedenen Anwendungen wie Smart Cars und Außenequipment. Es verbessert die Effizienz und Sicherheit deiner Projekte durch schnelles und flexibles Laden. Merkmale im Überblick Passend für Raspberry Pi 5 und das Raspberry Pi USB-C Netzteil Ermöglicht die Stromversorgung des Pi ohne zusätzliche Verkabelung dank Pogo-Pins Integrierter hoch-effizienter Step-down DC-DC-Wandler mit bis zu 95% Effizienz On-board LEDs für Lade- und Entladestufen der Batterie Erkennung von Stromausfall und Netzteilfehlern über GPIO, automatisches Einschalten bei Wiederherstellung der Stromversorgung Bietet bis zu 10 Stunden Dauerbetrieb mit geringem Energieverlust dank Advanced Power MOSFET und einem hoch-effizienten DC-DC Wandler Unterstützt einen weiten Eingangsspannungsbereich von 6V bis 18V und ermöglicht das nahtlose Umschalten zwischen Backup-Stromversorgung und Netzadapter Schnellladesystem mit 3000mA Kapazität, Steuerung über GPIO, und integrierte Schutzmaßnahmen gegen Überstrom und Überspannung Technische Daten Stromversorgung: 6-18Vdc (12Vdc 3A Netzadapter empfohlen) UPS-Ausgabe: 5V ±5% max 5A Batterieladestrom: Max 2.3 - 3.2A Endladespannung der Batterie: 4.23V Batterie-Nachladeschwelle: 4.1V PCB-Größe: 97.4mm x 85mm 10 Stunden kontinuierlicher Betrieb Maximale Stromabgabe: 5.1V 5000mA 4-Zellen-Halter für 18650-Batterien Anschlüsse: DC-Stromanschluss - 5,5x2,1mm 2x Sockel für 2-Zellen-Akku 18650 2x 5V Stromausgang - XH2.54 2-pin 2x USB2.0 Typ-A Stromausgangsbuchse 1x Anschluss für externe Einschalttaste - XH2.54-2P Lieferumfang 1x Raspberry Pi 5 UPS 1x Schraubenpaket LinksWikiSicherheitshinweiseUnkorrektes Laden oder Benutzen kann zu Bränden, Verletzungen und Sachschäden führen. Achte immer darauf, die Polarität der Batterieanschlüsse korrekt zu verbinden („+“ zu „+“ und „-“ zu „-“). Mische und benutze keine alten mit neuen Batterien oder Batterien unterschiedlicher Marken. Lithiumbatterien haben eine begrenzte Lebensdauer. Ersetze alte Batterien, sobald diese ihr Lebensende erreichen oder zwei Jahre alt sind. Beim Laden solltest du die Batterie in einem feuerfesten Behälter platzieren und den UPS-Schild nicht unbeaufsichtigt auf brennbaren Materialien wie Holz oder Teppichen belassen. Halte das UPS-Gerät fern von Kindern, um deren Sicherheit zu gewährleisten. Verwende keine 18650-Batterie mit eingebautem Schutzschaltkreis und schließe dein Raspberry Pi nicht über den Typ-C USB-Anschluss an.

FIT0992

€60.50

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

DFRobot 2 megapixel night camera, Sony IMX291, 1920x1080, microphone, plug-and-play, manual focus, USB

€49.90

Sofort verfügbar · 4 Stück · 1-3 days

DFRobot 2 megapixel night camera, Sony IMX291, 1920x1080, microphone, plug-and-play, manual focus, USB

DFRobot 2 Megapixel USB Night Camera with Microphone (Compatible with Raspberry Pi, LattePanda, Jetson Nano) This is a driver-free 2 megapixel USB night camera with a resolution of up to 1920*1080, based on the Sony IMX291 sensor. The camera offers manual focus, interchangeable lenses, plug-and-play functionality and delivers HD photos and videos even in low light conditions. Compatible with operating systems such as Windows, iOS, Android and Linux, this camera module has a digital microphone that picks up sound within 5 metres when recording video. The USB port makes it easy to use with your Raspberry Pi and Jetson Nano motherboard, especially when placed in a protective housing. Features at a glance Manual focus and interchangeable lenses: Allows flexible adjustment of image sharpness and perspective Plug-and-play: No driver installation required, simply connect and start immediately. High compatibility: Supports Windows, iOS, Android and Linux. Technical specifications Light-sensitive element: CMOS Sensor: Sony IMX291 Lens size: 1/2.8 inch Pixel size: 2.9µm x 2.9µm Maximum effective pixels: 1920(H) X 1080(V) 2 megapixels Image output format: MJPG/YUY2 Viewing angle: 100° Supported resolutions and frame rates: MJPG 1920x1080 at 30fps, YUY2 1920x1080 at 5fps etc. Interface: USB 2.0 High Speed (4pin 2.0mm connector) Focus: adjustable, manual or fixed Minimum illumination: 0.0001 Lux Power supply: USB BUS POWER 4P-2.0mm socket Operating voltage: DC5V Operating current: 160mA (VGA) Operating temperature: -20°C to 70°C Optional lenses: Sizes 1/2.8 inch, 1.8mm, 2.1mm, 2.8mm, 3.6mm, 6mm, 8mm, 12mm, 16mm Supported operating systems: WinXP/Vista/Win7/Win8, Linux with UVC, MAC-OS X 10.4.8 or later, Android 4.0 or higher with UVC Other data Driver-free protocol: USB Video Class (UVC) Supports AEC/AEB/AGC Adjustable parameters: Brightness, contrast, saturation, hue, sharpness, gamma, gain, white balance, background contrast, exposure Scope of delivery 1x USB night camera (with microphone)

FIT0730

€49.90

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 2.13 e-Ink display module, 250x122 resolution, SPI, 26.4mW, 3.3V

€24.90

Sofort verfügbar · 4 Stück · 1-3 days

DFRobot 2.13 e-Ink display module, 250x122 resolution, SPI, 26.4mW, 3.3V

DFRobot 2.13" e-ink Display Module for Raspberry Pi 4B/3B+/Zero W The DFRobot 2.13" e-ink Display Module is specially designed for use with Raspberry Pi 4B, 3B+ and Zero W. The module has a 2.13" display with a resolution of 250 x 122 pixels and uses an SPI interface for communication. The module has a 2.13-inch display with a resolution of 250 x 122 pixels and uses an SPI interface for communication. It enables the simultaneous use of the display and the GPIO pins of the Raspberry Pi, as all pins of the Pi are led out. The display supports customised fonts and is equipped with two patch touch switches that offer additional application options. Thanks to e-ink technology, the display provides a clear view even in direct sunlight and retains the last screen displayed even if the power supply is interrupted. The module is characterised by its compact design, low power consumption and simple plug-and-play functionality. Due to the long refresh time, it is less suitable for applications that require frequent data updates. Features at a glance 2.13-inch e-ink display with a resolution of 250 x 122 pixels SPI interface for easy communication Supports customised fonts Two patch touch switches for advanced applications Clear display in sunlight and last screen saved in case of power failure Compact design and low power consumption Compatibility Raspberry Pi 4B Raspberry Pi 3B+ Raspberry Pi Zero W Technical specifications Operating voltage: 3.3V Resolution: 250 x 122 pixels Interface type: SPI Colour mode: Black/white Update types: Full or partial Update time: 3s for full update, 680ms for partial update Update power: 26.4mW (typical) Standby power: 0.017mW Viewing angle: >170° Connection: 2.54mm 2x20-pin Dimensions: 66.5 x 31 mm Scope of delivery 1x Raspberry Pi e-ink Display Module 2x Double Nuts Copper 4x screws Links Product Wiki

DFR0591

€24.90

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 2.13 inch 250×122 ePaper module with ESP32, WLAN / Bluetooth, SD slot, black/white

€26.90

Sofort verfügbar · 10 Stück · 1-3 days

DFRobot 2.13 inch 250×122 ePaper module with ESP32, WLAN / Bluetooth, SD slot, black/white

This 2.13 inch ePaper module from DFRobot has a resolution of 250x122 pixels and an integrated ESP32. The module supports both Wi-Fi and Bluetooth functions and enables connection to the Alibaba Cloud to realise remote control of the display. It can also control other devices via its IO ports, which significantly reduces development costs. The display can clearly display text and patterns in black and white and retains the last displayed image when switched off. Further advantages are the low power consumption and the wide viewing angle. This product is ideal for displaying static patterns or text, such as price labels, name tags, message boards, etc. By connecting to WiFi, it can also be used as a calendar, electronic clock or weather forecast display. Features E-ink display panel with integrated ESP32 Displays the last screen when switched off Compact size, easy to integrate into other products Support for WLAN and Bluetooth connections Compatible with the Alibaba Cloud IoT platform Control of other devices via IO ports Technical specifications Operating voltage: 3.3V or 5V Display colour: black, white Grey scale: 2 Refresh time: 2 seconds Driver chip: GDEH0213B72 SD Slot Resolution: 250*122 Display size: 48.55*23.17 mm Scope of delivery e-ink display module for ESP32 x1 Pin Header x2 Cable x1 Documentation / Downloads Product wiki

DFR0676

€26.90

Sofort verfügbar · 10 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

DFRobot 370 Mini Vacuum Pump, Arduino compatible, 2.2L/min, -58kPa, 2.5W, 1.5-5V

€6.90

Sofort verfügbar · 3 Stück · 1-3 days

Neu

DFRobot 370 Mini Vacuum Pump, Arduino compatible, 2.2L/min, -58kPa, 2.5W, 1.5-5V

DFRobot 370 Mini Vacuum Pump This compact vacuum pump is easy to use and suitable for various pneumatic applications. It is based on a DC motor with a power consumption of 2.5 W at a supply voltage of 5 V. The pump draws in air via the side connection and releases it via the centre connection. Two pumps are required for simultaneous inflation and suction. The flow rate is 2.2 litres per minute and the maximum suction force is -58 kPa. Applications include household appliances, medical devices and vacuum packaging machines. Features at a glance Easy to use for pneumatic projects Delivery rate of 2.2 l/min Maximum suction force of -58 kPa Power consumption of 2.5 W at 5 V Compact design for versatile applications Compatibility Arduino and other microcontrollers DC motor control systems Technical specifications Operating voltage: 1.5-5 V No-load current: ≤500 mA (at 5 V) No-load flow rate: ≥2.2 L/min (at 5 V) Noise level: <60 dB Maximum vacuum: ≥-58 kPa Other data Suitable for operation with DC motor controls Scope of delivery 1x 370 Mini Vacuum Pump Links More Arduino projects Arduino tutorials

FIT0801

€6.90

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 386AMP audio amplifier module, 20x amplification, 325mW output power, LM386 chip, 4-12V

€11.90

Sofort verfügbar · 6 Stück · 1-3 days

DFRobot 386AMP audio amplifier module, 20x amplification, 325mW output power, LM386 chip, 4-12V

386AMP Audio Amplifier Module - Arduino compatible with low power consumption This 386AMP audio amplifier module developed by DFRobot utilises the National Semiconductor LM386 audio power amplifier chip. It provides an excellent solution for robot-human voice interaction and sound amplification, ideal for battery-powered applications. Features at a glance Low power consumption: Ideal for mobile use in battery-powered systems. Compatibility with Arduino: Enables easy integration into DIY projects. High gain: 20x voltage amplification, enables clear audio output. Technical specifications Power supply: 4-12V Output power: VS=6V, RL=8W, P=325mW, peak output 500mW Voltage amplification: VS=6V, f=1 kHz, Av=26dB Bandwidth: 300KHz Dimensions: 45 x 30 mm Other data Chip: National Semiconductor LM386 Scope of delivery 1x 386AMP audio amplifier module 1x loudspeaker Wiki: https://wiki.dfrobot.com/386AMP_audio_amplifier_Module__SKU__DFR0064_

DFR0064

€11.90

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 3V 260mm Flexible LED strip (2200k), 5 pieces

€11.50

Artikel aktuell nicht lieferbar

Details

DFRobot 3V 260mm Flexible LED strip (2200k), 5 pieces

This flexible LED filament chip has a diameter of 2 mm and a length of 260 mm. The small round hole at the end is the positive electrode and the non-porous end is the negative electrode. The filament is flexible and can be bent and folded as required. With a 3V power supply, it emits light in 360 degrees. They can be used for DIY lighting decoration, DIY light bulb ball, 360° full angle light emitting lamps, etc. Features 3V power supply, high brightness, suitable for DIY Small size, separate negative and positive electrodes Flex LED filament chip, can be bent and folded at will Specifications: Length Length: 260mm Supply voltage: 3V Operating current: 80mA Scope of delivery 3V 260mm Flexible LED Filament Chip (2200k) x5

FIT0812

€11.50

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

DFRobot 3V 260mm Flexible LED Strip (Green), 5 pieces

€11.50

Sofort verfügbar · 5 Stück · 1-3 days

DFRobot 3V 260mm Flexible LED Strip (Green), 5 pieces

FIT0809

€11.50

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 3V 260mm Flexible LED Strip (Pink), 5 pieces

€11.50

Sofort verfügbar · 3 Stück · 1-3 days

DFRobot 3V 260mm Flexible LED Strip (Pink), 5 pieces

FIT0811

€11.50

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

DFRobot 4-channel relay shield, 4 relays, optocoupler, XBee socket, Arduino UNO compatible, 5A 240V

€17.40

Sofort verfügbar · 14 Stück · 1-3 days

Neu

DFRobot 4-channel relay shield, 4 relays, optocoupler, XBee socket, Arduino UNO compatible, 5A 240V

DFRobot 4-Channel Relay Shield V2.1 for Arduino UNO The 4-Channel Relay Shield V2.1 from DFRobot is an expansion board for the Arduino UNO that offers four independent relays with optocoupler isolation. Each relay can switch high-current loads with up to AC 240 V / 5 A or DC 24 V / 5 A. Complete electrical isolation using optocouplers ensures safe operation and protects the main board from electromagnetic interference and overvoltage. The shield is based on the form factor of the Arduino UNO and can be plugged directly onto it, eliminating the need for complex cabling. It has integrated buttons for manual control of the relays, status LEDs for visualisation and an XBee-compatible socket module for wireless communication via Bluetooth, Zigbee or WiFi. In addition, 14 digital 3-pin ports and 6 analogue 3-pin ports are available. The module is suitable for implementing automation projects in which various devices need to be switched, including lamps, fans, pumps, sockets or door controls. Thanks to the standardised interface and compatibility with the Arduino UNO Rev3, functions can be implemented without additional hardware complexity. The integrated XBee interface allows wireless expansion via various protocols such as Zigbee or Bluetooth. This enables the creation of IoT applications or mobile remote control in smart home environments. The galvanic isolation by optocouplers protects the system against reverse currents from the high-voltage range. This product is an Arduino shield with four relays, each of which is isolated via optocouplers. It can be used to switch devices with higher voltage or current via the Arduino. Each relay has an LED indicator and its own test button, which simplifies troubleshooting. The XBee interface allows wireless communication modules to be integrated so that control systems can also be realised wirelessly. The galvanic isolation ensures safety and reliability when controlling devices with higher power. Features at a glance 4-channel relay shield with optocoupler isolation Can be plugged directly onto Arduino UNO Integrated XBee socket for wireless modules 14 digital 3-pin ports and 6 analogue 3-pin ports Manual control via integrated buttons Status display via LEDs Compatibility Arduino UNO Rev3 XBee-compatible modules (e.g. Zigbee, Bluetooth, WiFi) Technical specifications Switching voltage AC: up to 240 V Switching voltage DC: up to 60 V (recommended below 38 V) Switching current: max. 5 A Max. Max. switching capacity: 360 VA (AC), 90 W (DC) Contact rating: 3 A at 120 V AC / 24 V DC Relay service life electrical: min. 100,000 switching operations Mechanical relay service life: min. 10,000,000 switching operations Safety certificates: UL, cUL, TUV, CQC Relay coil voltage: 9 V DC Operating temperature: -30 °C to +85 °C Relative humidity: 40 % - 85 % Dimensions: 95 × 65 mm Other data Standard DFRobot 3-pin layout Direct control of XBee I/O possible Scope of delivery 1 × Relay Shield for Arduino V2.1 2 × nylon spacers with screws Links DFRobot Wiki: Relay Shield for Arduino V2.1 Circuit diagram Board Layout Example code Datasheet Relay HJR4102

DFR0144

€17.40

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 5.8GHz microwave radar module

€14.50

Sofort verfügbar · 9 Stück · 1-3 days

DFRobot 5.8GHz microwave radar module

This microwave sensor is a microwave module that can transmit electromagnetic waves of 5.8 GHz. It can detect the difference between the transmitted wave and the reflected wave to determine whether an object is moving within the detection range. Unlike conventional sensors, which can only detect the presence of people by detecting large body movements, this microwave sensor can also detect small movements such as breathing to determine the presence of people even when they are sitting or sleeping. The result can be output via the serial interface or the high/low level of the I/O port. It is characterised by high reliability and sensitivity, is small and easy to integrate and can be used in many areas where motion detection is required, e.g. lighting, security, household appliances, hotels, garages, buildings, traffic, etc. Features High reliability High sensitivity Strong anti-interference Specifications Operating voltage: 4.5~5.5V Operating current: 22mA Detection range: 11m Equivalent transmit power: 3-5dBM Beam angle: 120*120° Modulation mode: FMCW, CW Operating frequency: 5.8GHz Operating temperature: -40~85? Baud rate: 115200 Dimensions: 20*18mm/0.79*0.71" Scope of delivery 5.8GHz Microwave Radar Module x1 Documentation / Downloads Product Wiki

SEN0521

€14.50

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 600-6000MHz 5G Antenne, SMA Stecker, 5dBi Verstärkung, 90° Biegefunktion, -40-85°C

€8.90

Sofort verfügbar · 7 Stück · 1-3 days

DFRobot 600-6000MHz 5G Antenne, SMA Stecker, 5dBi Verstärkung, 90° Biegefunktion, -40-85°C

DFRobot 600-6000MHz 5G Antenna Diese 5G-Antenne ist speziell für 5G-Module und Geräte entwickelt, die hohe Effizienz und Spitzenverstärkung erfordern, um eine hervorragende Datenübertragung für Zugangspunkte, Terminals und Router zu gewährleisten. Sie unterstützt alle wichtigen zellularen Frequenzbänder (5G/4G/3G/2G) weltweit. Die robuste Konstruktion ermöglicht eine zuverlässige Signalverstärkung, optimales Senden und Empfangen von Signalen sowie eine verbesserte Netzwerkqualität. Die Antenne bietet eine 90°-Biegefunktion, flexible Ausrichtung und ist abwärtskompatibel mit 5G/4G/3G/2G-Anwendungen wie LTE, GSM, UMTS und Wi-Fi. Merkmale im Überblick Unterstützt 5G/4G/3G/2G-Frequenzbänder weltweit 90°-Biegefunktion für flexible Ausrichtung Verbessert WiFi- und 5G-Signale für optimale Netzwerkleistung Stabile Leistung und hohe Signalverstärkung Kompatibilität Kompatibel mit 5G-, LTE-, GSM-, UMTS- und Wi-Fi-Anwendungen Technische Daten Frequenz: 600MHz-6000MHz Impedanz: 50Ω Stehwellenverhältnis: ＜3 Verstärkung: 5dBi Stecker: SMA Verbindungskabel: 11,5mm, IPEX4-Generation Betriebstemperatur: -40℃ bis 85℃ Luftfeuchtigkeit: nicht kondensierend, 65°C, 95%RH Größe: Durchmesser 47mm, Höhe 30mm Dimensionen: 128,8±2,00mm Länge, 20,06±0,50mm Breite, 23,4±0,50mm Höhe Lieferumfang 1x 600-6000MHz 5G Antenna

TEL0143

€8.90

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot 9025MG servo motor, metal gearbox, 2.5kg/cm, 0.10s/60°, for robots and models, 4.8-6V

€8.50

Sofort verfügbar · 3 Stück · 1-3 days

DFRobot 9025MG servo motor, metal gearbox, 2.5kg/cm, 0.10s/60°, for robots and models, 4.8-6V

DFRobot 9025MG Metal Gear Servo Motor, 4.8-6V, 2.5kg/cm torque, compact, 0.10s/60° The DFRobot 9025MG Metal Gear Servo from Goteck is a small, lightweight and powerful servo with metal gears for longer life and added strength. Ideal for use in medium-sized electric aeroplanes, helicopters or mini robots. Thanks to its high load capacity and fast response time, it is perfect for demanding applications. Features at a glance Small, lightweight and powerful servo with metal gearbox for added strength. Ideal for use in medium-sized electric aeroplanes, helicopters or mini robots. High load capacity and fast response time for demanding applications. Technical data Operating voltage: 4.8~6V Stall torque: 2.3kg-cm(4.8V), 2.5kg-cm(6.0V) Operating speed: 0.10sec/60° (6V), 0.11sec/60° (4.8V) Top ball bearing Metal gearbox Size: 23 x 12.1 x 28.8 mm Weight: 14.7g Cable length: 180mm (JR) Working angle: 60°± 10° Limiting angle: 90°± 10° Other data Perfect for medium-sized electric aeroplanes, helicopters and mini-robots. Scope of delivery 1x 9025MG Metal Gear Servo

SER0011

€8.50

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot acrylic housing for LattePanda - Colour: transparent

€8.35

Sofort verfügbar · 7 Stück · 1-3 days

DFRobot acrylic housing for LattePanda - Colour: transparent

Protect your LattePanda with this special acrylic housing. It is made of transparent plastic so you can see all the status LEDs on the board when it is in the case. It fits both models, 2G/32 and 4G/64GB together with the optional cooling fan or copper heat sinks.There are cut-outs for the different connectors: USB, HDMI, SD card and space for routing the GPIO cables.The housing is supplied as a set and must be assembled. Brief instructions are provided to assist with assembly.

FIT0474

€8.35

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot AI Starter EEDU Kit, 16 parts, ESP32, Wifi & BT, Huskylens camera, relay, MP3 player, 3W

€89.90

Sofort verfügbar · 4 Stück · 1-3 days

DFRobot AI Starter EEDU Kit, 16 parts, ESP32, Wifi & BT, Huskylens camera, relay, MP3 player, 3W

Hackster & DFRobot AI Starter EEDU Kit We are pleased to introduce three EEDU kits specifically designed to help you get started in AI, IoT and environmental sensing with programmable hardware. Each kit is based on an Arduino-compatible, ESP32-based FireBeetle board and comes with application-specific peripherals to help you get up and running quickly. Features at a glance Easy to start, ideal for AI applications Cost effective and environmentally friendly Application-specific peripherals for fast prototyping Technical specifications Microcontroller: FireBeetle 2 ESP32-E IoT with Wi-Fi & Bluetooth Camera: HuskyLens - a user-friendly AI camera Additional modules: IO Shield, 10A relay module, DFPlayer Pro MP3 player Other data The kits are designed to be easily customisable and expandable, allowing users to add new peripherals and sensors as they improve their capabilities. Scope of delivery 1x Gravity: Huskylens - a user-friendly AI camera 1x FireBeetle 2 ESP32-E IoT microcontroller with header 1x Gravity: IO Shield for FireBeetle 2 (ESP32-E/M0) 1x Gravity: Digital 10A relay module 1x Fermion: DFPlayer Pro - a mini MP3 player with integrated 128MB memory (breakout) 1x Stereo terminated speaker - 3W 8Ω 10x Jumper cable 9" F/F LinksProduct wiki

DFR-AIKIT-EEDU

€89.90

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot aluminium housing for LattePanda V1.0

€44.20

Sofort verfügbar · 28 Stück · 1-3 days

DFRobot aluminium housing for LattePanda V1.0

This aluminium alloy case is a solid case for LattePanda Single Board Computer V1.0 (not compatible with LattePanda Alpha & Delta). It adopts the CNC machining and manufacturing, anodic oxidation surface treatment process. The inner space is enough to mount a fan (the total thickness of the fan should be less than 7.7mm). The ventilation hole and the connection hole are reserved for mounting the touch panel, display and cooling fan. Note: The fan will be damaged if the polarity is reversed. LattePanda is a complete Windows 10 single-board computer. It has everything a normal PC has and can do everything a normal PC does. It is compatible with almost every device you know: Printers, joysticks, cameras and more. All peripherals that work on your PC will also work on the LattePanda. Specifications Compatible with: LattePanda 2G/32GB & LattePanda 4G/64GB Material: Aluminium alloy Dimensions: 77.5 * 54.25 * 30.5 LattePanda Alpha & Delta is not compatible Scope of delivery Aluminium alloy case for LattePanda x1 Accessory pack x1 LattePanda fan x1

FIT0530

€44.20

Sofort verfügbar · 28 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot amphibious horizontal submersible pump, 3-6V DC, 150-370mA, 80-100L/H, IP68, for 5mm hose

€3.50

Sofort verfügbar · 9 Stück · 1-3 days

DFRobot amphibious horizontal submersible pump, 3-6V DC, 150-370mA, 80-100L/H, IP68, for 5mm hose

DFRobot Amphibious Horizontal Submersible Pump Use this amphibious micro submersible pump for small fountains, automatic water changers or DIY watering projects for plants! The pump operates at 3-6V and is characterised by low noise, high efficiency and easy cleaning. With an IP68 waterproof rating, it can be fully submerged provided the water is higher than the pump. Alternatively, water pipes can be connected to the inlet and outlet of the pump to move water from one place to another. Features at a glance Low noise and high efficiency for various water projects. Easy cleaning and IP68 watertightness enable versatile applications. Technical specifications Power supply: DC 3-6V Current: 150~370mA Pump head: 25-45cm Flow rate: 80-100L/H Power: 0.4~2W Water inlet and outlet: 5mm/0.20 inch Other data Water level must be higher than the pump for underwater operation. Scope of delivery 1x Amphibious Horizontal Submersible Pump 1x hose 1m

FIT0800

€3.50

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot ArcBotics Robotics Hexapod Kit

€339.43

Sofort verfügbar · 1 Stück · 1-3 days

DFRobot ArcBotics Robotics Hexapod Kit

The Hexapod (Hexy) from ArcBotics is a fully articulated hexapod >robot kit. It has 6 legs, 19 servo motors and is powered by an Arduino, while being less expensive than other hexapod robots. It makes complex robotics less expensive, easier to learn with the tutorials and documentation, and radically more fun (and cute!). At the same time, it's built with completely open-source hardware and software, making it as easy to discover and expand as it is to build. Hexy has been featured by Engadget, Wired, the New York Times, MAKE and many others. Use it to learn advanced robotics concepts like inverse kinematics, or use pre-built code to make it run the way you want. Build it using the high quality illustrated instructions and it's ready to run, play and dance with pre-built demos. Adding moves is as easy as opening and editing a text file, and the moves can be shared as simple text files. Features Low cost, 1/10 the price of other Hexapod kits Programme moves as a text file. Simple commands such as 'turn right 40 degrees' Easy programming of other functions. Arduino microcontroller, Python motion generator/controller Easy to assemble ? Complete step-by-step tutorials geared towards high school level and beyond Fully Arduino compatible, the Servotor32 controller uses the same chip as the Arduino Leonardo Demo moves are already available. Get it dancing as soon as you build it! Fully open-source. Code, laser cutter DXF/STL/SLDWRKS files, electronic board files, everything. Documentation / Downloads Wiki Doc Guide to getting started with Hexy Hexy's source files on Github Scope of delivery Hex Bag of Legs (Plastic Pieces) x7 Hex Bag of Body (Plastic Pieces) x1 Bluetooth Serial Module x1 Ultrasonic distance sensor x1 Screwdriver x1 Power cable x1 Battery compartment x1 USB MiniB cable x1 32-servo robot controller (Arduino-compatible) x1 Servo x20 Bag with screws x1

ROB0107

€339.43

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Audio Analyser Module

€20.05

Sofort verfügbar · 3 Stück · 1-3 days

DFRobot Audio Analyser Module

This audio analyser module is equipped with the MSGEQ7 graphic equaliser display filter. It will make your Arduino heard. The sound is divided into seven frequency bands and the peak level for each band can be read. The seven measured frequencies are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. With the Audio Analyzer module you can create sound visualisers, detect patterns in music or add sound activation to your microcontroller. Specifications Voltage: 5V Size: 30x20mm Weight: 5 grams Scope of delivery Audio analyser module x1 Analogue cable x2 Digital cable x1 Documentation / Downloads Audio Analyser Wiki Schematic MSGEQ7 data sheet Circuit diagram Arduino library (compatible with Arduino IDE 1.0 or higher version)

DFR0126

€20.05

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot battery holder for 2x 18650 with Micro-USB, USB-C

€12.40

Artikel aktuell nicht lieferbar

Details

DFRobot battery holder for 2x 18650 with Micro-USB, USB-C

This easy-to-use 16850 battery holder with dual slot offers micro and type C charging inputs and can be installed with two 18650 batteries, five 5V/2A output connections, five 3.3V/1A output connections and one 5V USB output. It has overcharge and over-discharge protection, which significantly extends the service life of your 18650 battery. You can switch between HOLD and NORMAL modes using the integrated DIP switch. In NORMAL mode, it switches off automatically when the current is too low, while in HOLD mode it retains its power and only switches off when the overcharge protection is triggered. This battery holder can be used as a power source for micro devices, outdoor equipment or DIY smart vehicles. Notes The maximum current is 3A (3A is not recommended), and the current depends on the quality of the 18650 battery Pay attention to the polarity when installing the battery. The plus and minus poles are clearly labelled on the circuit board, and the wrong direction will burn the module Features With protection against overcharging and overdischarging Specifications Output current: 5V/2A, maximum support 3A; 3.3V/1A Protection: with overcharge and over-discharge protection Input: Micro and type C input Output: USB output*1, 3.3V output port*5, 5V output port*5 LED indicator (flashing means charging, stop flashing means fully charged) Scope of delivery 2-way 18650 battery holder x1

DFR0969

€12.40

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

DFRobot Beetle BLE

€16.55

Sofort verfügbar · 4 Stück · 1-3 days

DFRobot Beetle BLE

The Beetle BLE (former name: Bluno Beetle) is a board based on the Arduino Uno with Bluetooth 4.0 (BLE). It is probably the smallest BLE board on the market. It uses the standard Arduino IDE to upload codes without additional libraries and drivers. This Beetle BLE is another milestone in the Beetle line, giving DIY enthusiasts more possibilities in project design. It is fully compatible with instructions and projects for Bluno. Supports Bluetooth HID and ibeacon modes. You can also refer to the Bluetooth microcontroller selection guide for more information. The Beetle BLE is a super tiny and low-cost Arduino-compatible board with Bluetooth 4.0. The Beetle BLE can be used for disposable projects, such as DIY projects, workshops, gift projects, e-textile wearables and educational projects. For students and makers who can't afford to spend too much on buying hardware, the Beetle can be a great solution for them. Just like a native Arduino board, but with Bluetooth 4.0. An APP called Play Bluno is available for IOS and Android that allows quick access to this small, tiny board. It not only supports USB programming, but also the wireless upload method. With the V-shaped gold-plated I/O interface, you can conveniently screw conductor wires on it, which could be a good choice for the wearable market. Features ATmega328@16MHz Bluetooth Low Energy (BT 4.0) Micro USB connector Super compact size Supports Bluetooth HID and ibeacon Compatible with all DFRobot Bluno series Supports wireless programming Specifications Bluetooth chip: CC2540 Sensitivity: -93dBm Working temperature: -10 ℃ ~ +85 ℃ Maximum distance: 50m(1968.50")(Open field) Microcontroller: ATmega328 Clock frequency: 16 MHz Operating voltage: 5V DC Input voltage: <8V (Vin < 8V) Digital pin x4 Analogue pin x4 PWM output x2 UART interface x1 I2C interface x1 Micro USB interface x1 Power connector x2 Size: 28.8mm X 33.1mm(1.13" x 1.30") Weight: 10g Scope of delivery Beetle BLE x1 Documentation / Downloads Wiki Schematics Layout top side Layout_Base

DFR0339

€16.55

Sofort verfügbar · 4 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Beetle Board, Arduino Leonardo compatible, ATmega32U4

€11.75

Sofort verfügbar · 9 Stück · 1-3 days

DFRobot Beetle Board, Arduino Leonardo compatible, ATmega32U4

Beetle is fully compatible with the Arduino Leonardo board. The core idea is minimalism without compromising functionality. It comes with Atmel ATmega32U4(datasheet) @16MHz clock frequency and has an extended number of interfaces: 10 digital pins, 5 analogue pins and 4 pwn pins. To make it even more user-friendly, it is compatible with Micro USB, so direct programming and testing is no longer a headache. Select "Arduino Leonardo (Tools - Board - Arduino Leonardo in Arduino IDE), the ATmega32U4 comes with a pre-burnt bootloader that allows you to upload any new code suitable for Arduino Leonardo. As the smallest DFRobot board compatible with Arduino Leonardo, it has similarly powerful features. Beetle aims to solve the problems of low-cost controller and easy operation and provide a cost-effective solution for disposable projects, such as DIY projects, workshops, gift projects, e-textiles and educational projects. For students and makers who can't afford to spend too much on buying hardware, Beetle can be a great solution. Features 20mm X 22mm compact size Direct download and testing via micro USB V-shaped, large-area, gold-plated IO ports make it convenient for users to twist wires and can also be sewn directly onto clothing with conductive thread. Two honeycomb-shaped gold-plated power connectors Magic blue flashing light Specifications: Microcontroller Microcontroller: ATmega32u4 Clock rate: 16 MHz Operating voltage: 5V DC Digital I/O pins: 10 PWM channels: 4 Analogue input channels: 5 UART: 1 I2C: 1 Micro USB: 1 Power connections: 2 Flash memory: 32 KB, of which 4KB is used by the bootloader SRAM: 2.5 KB EEPROM: 1 KB Size: 20mm*22mm*3.8mm Scope of delivery Beetle x1 Documentation / Downloads Wiki Circuit diagram

DFR0282

€11.75

Sofort verfügbar · 9 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Beetle ESP32 C6, WiFi 6, Bluetooth 5, Zigbee 3.0, Thread, RISC-V, 13 IO ports, 3.3V

€5.50

Sofort verfügbar · 35 Stück · 1-3 days

DFRobot Beetle ESP32 C6, WiFi 6, Bluetooth 5, Zigbee 3.0, Thread, RISC-V, 13 IO ports, 3.3V

DFRobot Beetle ESP32 C6 Mini Portable Smart Device Development Board (Supports BLE, Battery Charging) The Beetle ESP32-C6 is a low-power mini Arduino IoT development board based on the ESP32-C6 chip, which is characterised by its compact coin-sized design (25*20.5 mm). It supports communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0 and Thread 1.3 and is ideal as a matter terminal device. The integration of lithium battery charging management enables batteries to be charged without external modules, which is particularly advantageous for portable applications. Features at a glance Compact size: No larger than a coin, the board offers up to 13 IO ports to alleviate concerns about insufficient IO ports during project development. Supports multiple communication protocols: Enables the creation of Matter Wi-Fi terminal devices and Matter Thread terminal devices by supporting Wi-Fi 6 and Thread, as well as seamless communication in smart home systems. Ultra-low power consumption: With Wi-Fi 6 support, the board realises IoT devices with very low power consumption and improved network capacity and latency. Technical specifications Operating voltage: 3.3V Input voltage via Type-C and VIN: 5V DC Maximum charging current: 0.5A Sleep current: 14uA (in deep sleep mode, battery powered) Dimensions: 25x20.5mm Processor: RISC-V single core processor, main frequency 160 MHz SRAM: 512KB, ROM: 320KB, Flash: 4MB WIFI: IEEE 802.11b/g/n and 802.11ax protocols (20 MHz only, no AP mode) Bluetooth: Bluetooth 5, Bluetooth Mesh IEEE 802.15.4: Compatible with IEEE 802.15.4-2015, frequency band 2.4GHz, data rate 250Kbps Other data Number of digital I/Os: 13 PWM channels for LEDs: 6 Interfaces: SPI x1, UART x3 (including LP UART x1), I2C x2 (including LP I2C x1), I2S x1 IR transmitter: 5 channels, IR receiver: 5 channels 1 × 12-bit SAR ADC, 7 channels DM controller: transmission channel x3, reception channel x3 Scope of delivery 1x Beetle ESP32 C6 Mini development board 2x 10pin 2.54mm pin header

DFR1117

€5.50

Sofort verfügbar · 35 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Beetle ESP32 microcontroller

€11.50

Sofort verfügbar · 11 Stück · 1-3 days

DFRobot Beetle ESP32 microcontroller

Is FireBeetle-ESP32 too big for your projects? Why don't you try our new Beetle-ESP32? This Beetle-ESP32 microcontroller is a simplified version of the FireBeetle-ESP32 and has been specially designed for electronics and DIY enthusiasts. It is equipped with 4 analogue ports, 4 digital ports, UART and I2C interfaces and is therefore a perfect replacement for the FireBeetle-ESP32. With this microcontroller you can burn programs directly via the integrated USB interface. Bluetooth and WIFI are also integrated into the microcontroller to support other applications. With this Beetle-ESP32 you can easily build your dream project. Features A small size of 35mm×34mm Allows direct downloading and debugging of programs via micro USB, free from programming devices Large area I/O connectors with gold plating, which can be easily screwed with wires or sewn to clothes with wires without soldering. A group of gold-plated power connectors in honeycomb shape, convenient to use. Integrate WIFI and Bluetooth Specifications USB supply voltage: 5.0V VIN supply voltage: DC 3.5-6.5V Processor: Tensilica LX6 dual-core processor (one for high-speed connection; one for independent programming) Frequency: 240MHz SRAM: 520KB Flash: 16Mbit Wi-Fi Standard: FCC/CE/TELEC/KCC Wi-Fi Protocol: 802.11 b/g/n/d/e/i/k/r?802.11n, high speed up to 150Mbps), converge A-MPDU and A-MSDU, support 0.4us guard interval. Frequency range: 2.4~2.5GHz Bluetooth protocol: complies with BR/EDR/BLE standard of Bluetooth v4.2. On-chip clock: 40MHz crystal and 32.768 KHz crystal Digital interface: D2, D3, D4, D7 Analogue interfaces: A0, A1, A2, A3 I2C: 1 Serial connection: 1 Abmessungen: 35×34mm/1.38×1.34" Scope of delivery Beetle ESP32 microcontroller Documentation / Downloads Product Wiki

DFR0575

€11.50

Sofort verfügbar · 11 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot bionic robotic hand (left)

€199.99 €249.00 (19.68% gespart)

Artikel aktuell nicht lieferbar

Details

DFRobot bionic robotic hand (left)

DFRobot bionic robotic hand (left)The bionic robotic hand is made of acrylic material. It consists of 5 micro-metal servos, joints and a hand base. The special mechanical structure makes each finger can be controlled separately, all can move in certain range. And each finger has a spring damping structure, which effectively protects the robot hand from mechanical stress. With the 24 channel Veyron servo driver, all actions can be controlled by the PC software, which supports online debugging and wireless control. The bionic robot hand can be controlled by Arduino and other servo controllers. It can grasp 500g object, and it is the best option for DIY robot hand demonstration. The servo can be directly connected to the Arduino IO expansion shield or Romeo robot microcontroller, and the Arduino servo library makes it easy to use. Features at a glance Bionic robotic hand, each finger can be controlled separately. Special spring damping structure, effective protection Acrylic material, the whole kit is less than 900g Free of manual assembly, assembled before delivery Compatible with Arduino and the other microcontrollers Recommended power supply 5V@2A Technical specifications Operating voltage: 4.8-6V Control signal: 1.0ms~2.0ms (45~135°) Operating current: 2A Payload: 500g Servo torque: 2.4kg*cm (4.8v) 2.8kg*cm (6v) Servo speed: 0.11"/ 60 ° (4.8v) 0.09" / 60 ° (6.0 V) Operating temperature: 0 ~ 55°C Cable: Brown <-> GND Red <-> VCC Orange <->Signal Servo dimension: 23 * 12.2 * 29mm Hand size: 330mm (height) Servo net weight: 14g Weight: 916g (whole kit) Scope of delivery 1x Bionic Robot Hand (left) Left hand Product WIKI Notes Please be careful with the servo control, even though there are damping structures on each finger, non-standard operation will still damage the servos.

ROB0142

€199.99 €249.00 (19.68% gespart)

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

DFRobot bionic robotic hand (right)

€239.90

Sofort verfügbar · 1 Stück · 1-3 days

DFRobot bionic robotic hand (right)

DFRobot bionic robotic hand (right) The bionic robotic hand is made of acrylic material. It consists of 5 micro-metal servos, joints and a hand base. The special mechanical structure makes each finger can be controlled separately, all can move in certain range. And each finger has a spring damping structure, which effectively protects the robot hand from mechanical stress. With the 24 channel Veyron servo driver, all actions can be controlled by the PC software, which supports online debugging and wireless control. The bionic robot hand can be controlled by Arduino and other servo controllers. It can grasp 500g object, and it is the best option for DIY robot hand demonstration. The servo can be directly connected to the Arduino IO expansion shield or Romeo robot microcontroller, and the Arduino servo library makes it easy to use. Features at a glance Bionic robotic hand, each finger can be controlled separately Special spring damping structure, effective protection Acrylic material, the whole kit is less than 900g Free of manual assembly, assembled before delivery Compatible with Arduino and the other microcontrollers Recommended power supply 5V@2A Technical specifications Operating voltage: 4.8-6V Control signal: 1.0ms~2.0ms (45~135°) Operating current: 2A Payload: 500g Servo torque: 2.4kg*cm (4.8v) 2.8kg*cm (6v) Servo speed: 0.11"/ 60 ° (4.8v) 0.09" / 60 ° (6.0 V) Operating temperature: 0 ~ 55°C Cable: Brown <-> GND Red <-> VCC Orange <->Signal Servo dimension: 23 * 12.2 * 29mm Hand size: 330mm (height) Servo net weight: 14g Weight: 916g (whole kit) Scope of delivery 1x Bionic Robot Hand (right) Links Product WIKI Notes Please be careful with the servo control, even though there are damping structures on each finger, non-standard operation will still damage the servos.

ROB0143

€239.90

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot bipolar stepper motor with planetary gearbox, 5.18:1, 1.8° step angle, 18kgcm, 3.4V

€36.90

Sofort verfügbar · 12 Stück · 1-3 days

DFRobot bipolar stepper motor with planetary gearbox, 5.18:1, 1.8° step angle, 18kgcm, 3.4V

DFRobot Bipolar Stepper Motor with Planetary Gearhead (18kg.cm) This bipolar stepper motor with planetary gearhead (transmission ratio: 5.18) uses a standard 8mm D output shaft and has a step angle of 1.8° (200 steps/revolution). Each phase draws 1.0 A at 3.4 V, allowing a holding torque of 18kg.cm (176N.cm) (200rpm). The motor has a housing size of 42mm square and 40mm long, while the planetary gearhead has a diameter of 36mm and a length of 27mm. The motor has four colour-coded wires with open ends: Black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and controlled with the Dual Bipolar Stepper Motor Shield for Arduino (DRV8825). The DFRobot Bipolar Stepper Motor with Planetary Gearhead is a high-precision and high-performance motor that is ideal for demanding applications in fields such as robotics, CNC machines, 3D printing and linear actuators. By combining a stepper motor with a planetary gearhead, this motor offers both precision and high torque, making it ideal for complex motion control applications. Special features of the motor Bipolar operation: The motor is a bipolar stepper motor, which means that each of the two coils (phases) can be polarised to change the direction of the magnetic field. In contrast to unipolar stepper motors, the bipolar motor utilises the entire coil, resulting in higher torque and better efficiency. However, it requires special drivers, such as the DRV8825, to precisely control the phases. Planetary gearbox: The integrated planetary gearbox with a transmission ratio of 5.18:1 increases the holding torque to an impressive 18kg.cm (176N.cm). The planetary gear also ensures even power transmission, reduced vibrations and a longer service life. Precise step angle: With a step angle of 1.8° (200 steps/revolution), the motor enables extremely precise motion control, which is essential in applications such as 3D printing or CNC milling. High compatibility: The motor is easy to integrate into existing projects thanks to its standard 8mm D output shaft and four colour-coded connections. It is particularly suitable for applications that require high torques and precise control. Advantages of the bipolar design Higher torque: Bipolar motors utilise the entire copper wire in the coil, resulting in higher efficiency and greater torque. Compact design: Compared to unipolar motors, bipolar motors are more compact as they require fewer windings. Flexibility: They can be combined with various control systems such as the DRV8825 Dual Bipolar Stepper Motor Shield. Features at a glance Bipolar stepper motor with planetary gearbox Standard 8mm D output shaft Step angle of 1.8° (200 steps/revolution) Holding torque of 18kg.cm (176N.cm) Applications 3D printers: High precision and strength for complex prints. CNC milling: Stability and strength for precise milling work. Robotics: Suitable for motion control of robot arms. Linear drives: Ideal for precise linear movements, e.g. in automated systems. Technical Data Modellnummer: 42BYGH40-18-22A-C5.18 Step angle: 1.8° 2 phases Voltage: 3.4V Current: 1.0A Resistance: 1.7±10% ohm/phase Inductance: 4.3±20% mH/phase Holding torque: 3600 g.cm Cogging torque: 400 g.cm Insulation class: B Service life: 6000 hours Transmission ratio: 5.18:1 Holding torque with gear: 18kg-cm (176N-cm) (200rpm) Dimensions: 42×42×40mm (1.65x1.65x1.57") Mounting: 4 x M3 Scope of delivery 1x stepper motor with planetary gearbox Documentation Mechanic Datasheet

FIT0349

€36.90

Sofort verfügbar · 12 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Bluetooth 4.2 audio receiver board, dual 5W amplifier, 15m range, WAV, 3.7-5V

€3.90

Sofort verfügbar · 3 Stück · 1-3 days

DFRobot Bluetooth 4.2 audio receiver board, dual 5W amplifier, 15m range, WAV, 3.7-5V

DFRobot Bluetooth 4.2 Audio Receiver Board with Amplifier (2x5W) This is a small, low-cost Bluetooth 4.2 audio receiver module with two 5W power amplifier circuits. It supports automatic reconnection and can be powered by micro USB or a 3.7V lithium battery. The module can become a stereo Bluetooth speaker when connected to two speakers. The board can also be connected to a computer via USB to use it as a sound card. Features at a glance Small and inexpensive: Ideal for DIY audio projects. Automatic reconnection: Simplifies reconnection with devices. Dual 5W amplifier: Enables the creation of powerful stereo systems. Technical specifications Power supply: 3.7V-5V Bluetooth version: 4.2 Transmission distance: up to 15m (visible) Audio decoding: WAV, APE, FLAC, MP3 Suitable speakers: 2-8 Ohm, 3-5W (recommended 4 Ohm 5W) Dimensions: 20*45mm Other data User notes: No connection to an external amplifier, as a dual 5W amplifier is already integrated. Safety instructions: Watch out for electrostatic discharges and keep the module away from high-frequency or strong electromagnetic signals. Scope of delivery 1x Bluetooth 4.2 audio receiver board with amplifier (2x5W)

DFR0720

€3.90

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot Bluetooth 5.0 audio receiver board, WAV, FLAC, MP3, 15m range, 3.7-5V

€2.90

Artikel aktuell nicht lieferbar

Details

DFRobot Bluetooth 5.0 audio receiver board, WAV, FLAC, MP3, 15m range, 3.7-5V

DFRobot Bluetooth 5.0 audio receiver board Compact and cost-effective Bluetooth 5.0 audio receiver module with automatic reconnection function and power supply via micro USB or 3.7V lithium battery. Ideal for converting old speakers into wireless Bluetooth speakers. Features at a glance Bluetooth 5.0: Supports backward compatibility with Bluetooth 4.2, 4.1, 4.0. Automatic reconnection: Simplifies reconnection after initial pairing. Convertible as a sound card: By short-circuiting the sound card pads on the back of the module and connecting via USB. Blue LED flashes when switched on to indicate Bluetooth mode and switches to pairing mode after playing an audio prompt. After connecting with "BT5.0 audio", the LED remains constantly on, music can be played while the indicator flashes slowly. Technical data Power supply voltage: 3.7V-5V Bluetooth version: 5.0 (backwards compatible with 4.2, 4.1, 4.0) Transmission distance: 15m (line of sight) Audio decoding: WAV, APE, FLAC, MP3 Size: 30 x 30 mm Other data Blue LED: Flashes in Bluetooth mode, lights up constantly when successfully connected. Indicator: Flashes slowly when playing music. Scope of delivery 1x Bluetooth 5.0 audio receiver board Notes Lithium battery protection circuit: Not available, use with Lipo Charger Board recommended. Observe electrostatic protection measures: Avoid direct contact with statically charged hands. Placement: Keep away from high-frequency or strong electromagnetic signals and metal objects.

DFR0718

€2.90

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

DFRobot Boson Smart Science Pack, earthquake modelling, plug-and-play, reusable, 4.5V-5.5V

€32.90

Sofort verfügbar · 1 Stück · 1-3 days

DFRobot Boson Smart Science Pack, earthquake modelling, plug-and-play, reusable, 4.5V-5.5V

Boson Smart Science Pack - Earthquake Challenge The Boson Smart Science Pack - Earthquake Challenge is an interactive learning kit specifically designed to teach the principles of earthquake technology in a vivid way. Combining a shake table with simple materials and BOSON modules, this model allows you to simulate and analyse seismic ground motion in real time. Ideal for use in STEAM education programmes, this kit provides an excellent opportunity to apply theoretical knowledge practically and explore earthquake-resistant structures. With its plug-and-play functionality and robust, reusable design, it is an essential tool for any modern classroom. Features at a glance Plug-and-play: Easy to use and quick to get started. Reusable: Suitable for repeated use in experimental scenarios. Applications in STEAM education and earthquake modelling. Technical specifications Operating voltage: 4.5V-5.5V Dimensions: 60 x 220 x 300 mm Weight: 300g Other data The model simulates seismic ground movements during an earthquake. The speed of the motor can be changed using a rotation sensor to generate movements at different frequencies. Scope of delivery 1x main board-1 IO 1x motor control module 1x Boson: rotation sensor 1x 3xAAA battery holder 1x Boson: Micro Metal Gear Motor 2x cable - 10cm 1x packaging box Instructions Materials such as micro:bit, box & carton, straws, pipe cleaners, bottle caps, rubber bands and drawing pins are not included. Application: https://edu.dfrobot.com/makelog-308658.html

TOY0084-lite-EC

€32.90

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Kunden kauften auch

Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

€2.15

Sofort verfügbar · 14 Stück · 1-3 days

Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

ADA4205

€2.15

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Seeed XIAO ESP32C3, tiny MCU board with WLAN and BLE

€8.40

Sofort verfügbar · 31 Stück · 1-3 days

Seeed XIAO ESP32C3, tiny MCU board with WLAN and BLE

SE-113991054

€8.40

Sofort verfügbar · 31 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DFRobot TT motor with encoder, 160RPM, 120:1 gear ratio, 0.8kgcm torque, 0.17A no-load current, 6V

€7.30

Sofort verfügbar · 19 Stück · 1-3 days

DFRobot TT motor with encoder, 160RPM, 120:1 gear ratio, 0.8kgcm torque, 0.17A no-load current, 6V

FIT0450

€7.30

Sofort verfügbar · 19 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Short pin header kit for feather, 12-pin and 16-pin female headers

€1.65

Sofort verfügbar · 22 Stück · 1-3 days

Short pin header kit for feather, 12-pin and 16-pin female headers

ADA2940

€1.65

Sofort verfügbar · 22 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Neu

ESP32 NodeMCU Development Board

€6.80

Sofort verfügbar · 100+ Stück · 1-3 days

Neu

ESP32 NodeMCU Development Board

NMCU-ESP32

€6.80

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

NodeMCU v3 - ESP8266 Development Board, CH340G

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

NodeMCU v3 - ESP8266 Development Board, CH340G

NMCUV3

€3.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten