Zur Startseite gehen
€0.00
Menü
Zeige alle Kategorien Installation Materials
Zurück Installation Materials anzeigen
Bildergalerie überspringen
Damp-proof junction box, 85x85x40mm, IP54
Damp-proof junction box, 85x85x40mm, IP54
Damp-proof junction box, 85x85x40mm, IP54
Damp-proof junction box, 85x85x40mm, IP54
Damp-proof junction box, 85x85x40mm, IP54
Damp-proof junction box, 85x85x40mm, IP54
Bewerten

Damp-proof junction box, 85x85x40mm, IP54

Produktnummer: T1534468

€0.90

Jetzt Bestellen und
1 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

Sofort verfügbar · 18 Stück · 1-3 days

Menge prüfen

  • Sofort verfügbar

    18 Stück : 1-3 days

99% positive Bewertung
Kostenloser Versand ab 79€*
Support
Wird oft zusammengekauft
Damp-proof junction box, 85x85x40mm, IP54
+
Breadboard with 830 contacts
+
40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm
+
official Raspberry Pi Micro USB cable, red, 1.0m
+
40pin Jumper / Dupont cable Male Male separable
=
Gesamtpreis: €11.30*
Beschreibung

Produktinformationen "Damp-proof junction box, 85x85x40mm, IP54"

- Easy to install
- With up to 12 self-sealing cut-off cable glands for cables up to 5 x 2.5 mm²
- External fixing lugs with cross and slotted holes ensure subsequent alignment
- Material: housing + cover PE, recyclable
- VDE
Eigenschaften
Zolltarifnummer: 39269097
Brand: Frei
Country of Origin: China
EAN: 4034338511316
Gross Weight (kg): 0.02
Manufacturer ID: 1534468
Product ID: T1534468
VPE: 10 / 150
Manufacturer and safety information
Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de


Person responsible for the EU
See manufacturer information

Safety instructions
  • Before installation, switch off the circuit and check that it is de-energised.
  • Installation may only be carried out by qualified specialists.
  • Protect the product from moisture, dust and excessive heat.
  • Use the original packaging to avoid transport damage.
  • Do not repair defective components yourself - contact the manufacturer.
  • Do not install the product in the vicinity of flammable substances.
  • Do not operate on overloaded circuits or unsuitable mains voltages.
  • Dispose of old appliances, packaging and electrical material in accordance with local regulations.
  • Never dispose of waste with household waste, but dispose of it at collection points.
  • Avoid contact with water or conductive liquids at all costs.
  • Keep children and unauthorised persons away from the installation and operation.
  • Ensure that the installation is protected against short circuits or overloading.
Bewertungen
0

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Produktgalerie überspringen

Kunden kauften auch

seeed Grove - Wrapper 1x1, blue, pack of 4
seeed Grove - Wrapper 1x1, blue, pack of 4
Seeed Grove - Blue Wrapper 11 (4 PCS pack) Grove - BlueWrapper 11 is a module mounting system specifically designed to securely mount and integrate Grove modules into Lego or Makeblock based projects. The design of the wrapper utilises a semi-open housing, which does not restrict the use of Grove modules. The wrapper protects the modules and facilitates the presentation of projects in a structured way. The mechanical design allows easy mounting and dismounting of the modules. The product offers flexible mounting options and supports screw mounting with M2 or M4 screws. The ability to connect the wrappers like Lego modules allows a modular construction system to be created. The wrappers are available in different colours such as blue, green, yellow and red, allowing projects to be colour-coded. Grove - Blue Wrapper 1*1 can be used to safely build electronic projects, especially those based on Lego or Makeblock environments. The flexibility of the attachment simplifies the maintenance and replacement of Grove modules. The semi-open design ensures that module functions remain unrestricted while providing protection and stability for the project. Typical applications include DIY projects, robotics and educational applications. The Grove wrapper system is suitable for the protection, presentation and modular construction of electronic projects. It facilitates the integration of Grove modules into existing modular systems and ensures secure fastening. The option of colour coding simplifies the organisation of complex circuits. Features at a glance Semi-open design allows unrestricted access to Grove modules Compatible with Lego and Makeblock systems Flexible quick release for easy installation and replacement of modules Support for screw connection with M2 and M4 screws Colour differentiation through different wrapper colours Compatibility Grove modules Lego systems Makeblock systems Technical Data Dimensions: 25mm x 25mm x 13mm Material: ABS Colours: Blue, Green, Yellow, Red Weight: 25g (total for the set) Battery: Not included Other data Design supports modular extensions through Lego-like connection options Scope of delivery 4x Grove - BlueWrapper 1*1 Links Mechanical diagram Assembly instructions
€1.90

Sofort verfügbar · 20 Stück · 1-3 days

seeed Grove - Wrapper 1x2, blue, pack of 4
seeed Grove - Wrapper 1x2, blue, pack of 4
Seeed Grove - Wrapper for LEGO and Makeblock Modules Grove - Wrapper is primarily intended to protect Grove modules. The design as a semi-open space does not affect the use of Grove modules. This saves effort when customising modules and makes it easy to present projects. The use of the Grove wrapper ensures a clear and tidy presentation. In addition, compatibility with LEGO bricks, Makeblock and other systems means that the project can be flexibly expanded and adapted to different environments. The mechanical design of the Grove - Wrapper makes it easy to assemble and disassemble the modules. Grove - Wrapper utilises a flexible locking system that facilitates the installation and replacement of Grove modules. The ability to use different coloured wrappers and connect the modules together like LEGO elements makes the product particularly suitable for building electronic LEGO projects. Features at a glance Construction of electronic LEGO projects with coloured wrappers Compatible with LEGO and Makeblock modules Flexible locking system for easy installation and replacement of Grove modules Semi-open space protects and does not interfere with the function of the modules Compatibility with LEGO modules Makeblock modules Technical data Dimensions of large wrapper module: 50 × 25 × 13 mm Dimensions of small wrapper module: 25 × 25 × 13 mm Material: ABS Colour: Blue Product dimensions packaging: 110 mm x 80 mm x 15 mm Weight: 25 g Power supply: External power source required (no battery included) Other data Suitable for easy presentation of projects Promotes creative extensions through connection with LEGO and Makeblock Scope of delivery 4x Grove - Blue Wrapper 1*2 Links Example project Connected LEGO Desk Houses
€1.90

Sofort verfügbar · 54 Stück · 1-3 days

Battery holder for 1x 18650 with print connection
Battery holder for 1x 18650 with print connection
1x 18650 (168A) battery holderPrint mounting, horizontal (2-pin)Technical data: - Suitable battery size: 18650 (168A) - Colour: Black - Length: 71.00 mm- Connection, type: Print mounting, horizontal (2-pin - No. of cells: 1 pc.- Consumption unit: 1 pc. in polybag - Width: 21.00 mm - Height: 2.00 mm - No. of cells: 1 pc Consumption unit: 1 pc. in polybag - Width: 21.00 mm- Height: 21.00 mm- Number of cells: 1.00 pieces- Operating temperature from: -20.00 °C- Operating temperature up to: 50.00 °C
€0.95

Sofort verfügbar · 55 Stück · 1-3 days

Junction box, IP65, 1 input and 2 outputs, 125x69x33mm
Junction box, IP65, 1 input and 2 outputs, 125x69x33mm
This makes cable laying child's play! Ideal for cables in outdoor areas or damp rooms.- One input and two outputs- Suitable for cables with a cross-section of 0.5-2.5mm² (outer diameter 4-8mm)- Protection class IP65- Made of UV-resistant plastic- For connecting supply cables made of PVC, silicone or rubber- Dimensions 125x69x33mm- Scope of delivery: junction box
€1.80

Sofort verfügbar · 6 Stück · 1-3 days

HC-SR04 Ultrasonic sensor
HC-SR04 Ultrasonic sensor
Ultrasonic sensor - Ideal for use with the Raspberry Pi or Arduino. Technical data - Operating voltage: 5V DC - Current consumption: 15 mA - Quiescent current: < 2mA - Detection angle: <=15° - Detection range: 2 - 450 cm - Accuracy: 3 mm - Input trigger signal: TTL pulse 10µS - Output signal: TTL Low active - Operating temperature: -15 - 70° - Board dimensions: 46 x 20 x 13 mm
€1.49

Sofort verfügbar · 100+ Stück · 1-3 days

Battery holder for 3x Mignon AA with 150mm connection cable and closed housing
Battery holder for 3x Mignon AA with 150mm connection cable and closed housing
Goobay 3x AA (Mignon) battery holderloose cable ends, switchable, water-repellentThe Goobay battery holder can be installed in or attached to a battery-operated device.Three AA batteries can be inserted into the water-repellent black plastic housing.The AA battery compartment holds the AA batteries securely and firmly in place and ensures a constant power supply.The AA battery holder is equipped with an on/off switch and loose cable ends.Technical dataConnection, type: loose cable endsSpecial feature: switchable, water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 47.5 mmColour: blackColour version: BlackHeight: 19.5 mmLength: 69 mmsuitable battery size: AA (Mignon)suitable IEC battery types: FR6, HR6, LR6
€0.82

Sofort verfügbar · 22 Stück · 1-3 days

Sonoff IP66 housing for Smart Switch series
Sonoff IP66 housing for Smart Switch series
Sonoff IP66 housing for Smart Switch series Sonoff IP66 is a high-quality waterproof housing that protects the relay from contact with water. The waterproofness of the housing is IP66. Its application allows you to use smart switches e.g. in the garden to control outdoor lighting. The connections can be fitted with a cable with a diameter of 3-6.5 mm. Features at a glance IP66 watertightness: Provides reliable protection against water and dust. Ognioodporny ABS V0 material: Ensures high durability and safety. Compatibility: Supports Basic, RF, TH10, TH16, Dual, G1. Technical data Dimensions: 132.2 x 68.7 x 50.1 mm Weight: 145 g Material: Ognioodporny ABS V0 Compatibility: Basic, RF, TH10, TH16, Dual, G1 Cable diameter: 3-6.5 mm Degree of protection: IP66 Cover material: Transparent PC V0 Scope of delivery 1 x Sonoff IP66 housing
€4.30

Sofort verfügbar · 44 Stück · 1-3 days

Shelly Plus 1PM Gen3, WLAN + Bluetooth switching actuator with measuring function
Shelly Plus 1PM Gen3, WLAN + Bluetooth switching actuator with measuring function
The Shelly 1PM Gen3 is a compact WLAN-controlled smart switch that can not only control appliances remotely, but also precisely measure their energy consumption. It is designed to automate household appliances in minutes and allows control and monitoring from anywhere. Thanks to its small size, the switch fits behind most wall switches and sockets. It is easy to retrofit and compatible with existing smart home systems. Its high performance and security make it an ideal solution for modern smart homes. The new processor, the ESP-Shelly-C38F chip, offers more power and extended functionality with 8 MB of memory. Features Precise power measurement in real time New processor - ESP-Shelly-C38F chip with 8 MB more memory Improved terminal durability High security WLAN range extender and Bluetooth gateway Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and own certificates No HUB required! Easy control via the Shelly Smart Control app as well as various home automation protocols and voice assistants Technical specifications Size (H x W x D): 37 x 42 x 16 mm Weight: 27 g Screw terminals max torque: 0.4 Nm / 3.5 lbin Conductor cross-section: 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded and wire-end ferrules) Stripping length of the conductor: 6 to 7 mm / 0.24 to 0.28 inch Mounting: Wall bracket/flush-mounted box Housing material: Plastic Colour of the housing: Red Ambient temperature: -20 °C to 40 °C Humidity: 30 % to 70 % relative humidity Max. Altitude: 2000 m Power supply: 110-240 V~24-30 V? Power consumption of the device: < 1.2 W Max. Switching voltage: 240 V~30 V? Max. Switching current: 16 A (240 V~)10 A (30 V?) Internal temperature sensor: Yes Voltmeter (AC): Yes Ammeter (AC): Yes WLAN protocol: 802.11 b/g/n Frequency band: 2401-2483 MHz Max. RF power: < 20 dBm Range: Up to 50 m outdoors, up to 30 m indoors (depending on local conditions) Bluetooth protocol: 4.2 Bluetooth frequency band: 2400-2483.5 MHz Max. RF power: <4 dBm Bluetooth range: up to 30 m outdoors, up to 10 m indoors (depending on local conditions) CPU: ESP-Shelly-C38F Flash: 8 MB Schedules: 20 WebHooks (URL actions): 20 with five URLs per hook WLAN range extender: Yes BLE gateway: Yes Scripting: Yes MQTT: Yes Encryption: Yes Scope of delivery Shelly 1PM Gen3 relay User manual
€17.90

Sofort verfügbar · 6 Stück · 1-3 days

Raspberry Pi Active Cooler, fan for Raspberry Pi 5
Raspberry Pi Active Cooler, fan for Raspberry Pi 5
Do you use your Raspberry Pi 5 without a housing under heavy load? The Active Cooler ensures smooth operation and optimum performance. The Active Cooler offers an efficient cooling solution for Raspberry Pi 5 users who use their device without a housing under sustained high loads. It combines a large metal heat sink with a continuously adjustable fan, which is also supplied with power and controlled via the fan connector. It is easily attached using spring-loaded pins in the two mounting holes provided on the Raspberry Pi 5 board. This keeps your Raspberry Pi 5 in top form at all times. Note: A Raspberry Pi 5 is not included in the scope of delivery.
€5.80

Sofort verfügbar · 100+ Stück · 1-3 days

Rocker switch, round, 1-pole, black, illuminated red (250 V), ON-OFF
Rocker switch, round, 1-pole, black, illuminated red (250 V), ON-OFF
Round rocker switch, 1-pole, black, illuminated red (250 V), ON-OFF This high-quality round rocker switch is perfect for applications that require a reliable ON/OFF function. It is suitable for snap-in mounting and has flat plug connections for easy installation. With its compact dimensions, it fits into many different devices and applications. Features at a glance Two positions: ON / OFF - Provides clear and simple operation. Suitable for snap-in mounting - Quick and easy installation. 4.8mm spade terminals - Secure and easy connection. Technical data Installation dimension: 20mm-Ø Dimensions LxWxH: 24 x 24 x 25mm Switching capacity: 250 V suitable for snap-in mounting Installation dimension: 20mm-Ø: with flat plug connections: 4.8mm Scope of delivery 1x rocker switch
€0.38

Sofort verfügbar · 100+ Stück · 1-3 days

Raspberry Pi 27W USB-C Power Supply, power supply unit, black
Raspberry Pi 27W USB-C Power Supply, power supply unit, black
The Raspberry Pi 27W USB-C Power Supply is an ideal power supply for the Raspberry Pi 5, especially for users who want to power high performance peripherals such as hard drives and SSDs via the four USB ports of the Raspberry Pi 5. Thanks to additional integrated power profiles, the Raspberry Pi 27W USB-C power supply is also an excellent option for powering third-party PD-compatible products. The available profiles are 9V, 3A; 12V, 2.25A; and 15V, 1.8A, all limited to a maximum of 27W. Features at a glance Ideal for the Raspberry Pi 5 and powerful peripherals Suitable for powering third-party PD-compatible products Available profiles: 9V, 3A; 12V, 2.25A; 15V, 1.8A, all up to a maximum of 27W Technical specifications Input: 100 - 240V AC Output: 5.1V, 5A; 9V, 3A; 12V, 2.25A; 15V, 1.8A (Power Delivery) Connection: USB-C Cable: 1.2m 18AWG Colour: black Product documentationProduct BriefScope of delivery1 x Official Raspberry Pi 5 power supply, white
€12.40

Sofort verfügbar · 100+ Stück · 1-3 days

WAGO 221-2411 Feed-through connector Terminal with lever
WAGO 221-2411 Feed-through connector Terminal with lever
Open the lever, insert the conductor, close the lever - done. The 221 series connection terminal has always made the electrical installation of solid, fine and stranded conductors simple, quick and safe. Conductor cross-sections from 0.14 to 4 mm²? No problem! Connection type: Installation Quick-clamp Electrical installation: Spring clamp terminal Cable cross-section: 0.2...4mm2 Plug connector series: 221 Mechanical assembly: for cables Rated voltage: 450V Rated current: 32A Number of paths: 1 Number of connections: 2 Plug connector variant: with lever Manufacturer: WAGO: WAGO
€0.49

Sofort verfügbar · 100+ Stück · 1-3 days

PCWork, PCW04A 2in1 side cutter, wire stripper
PCWork, PCW04A 2in1 side cutter, wire stripper
The PCW04A 2in1 wire stripper and side cutter is a high-quality tool for electricians and DIY enthusiasts. It is made of alloyed carbon steel, which guarantees a long service life and high quality. With these pliers, you can strip and cut cables and wires with ease. High-quality workmanship and quality The PCW04A wire stripper and side cutter is characterised by its top workmanship and quality. The sharp blades enable precise and clean cutting of cables and wires. The 30° angled cutting tip makes it easier to work on circuit boards where space is tight. Ergonomic design and easy handling Thanks to the comfortable, non-slip and ergonomic handle, the pliers sit comfortably in the hand and allow you to work comfortably. The invisible spring construction ensures increased resilience and makes cutting easier. The PCW04A wire stripper and side cutter is compact and lightweight, making it particularly easy to handle. Versatile application The PCW04A wire stripper and side cutter makes it easy to strip cables of various sizes. It is suitable for cables with a diameter of 0.8-2.6mm / 20-10AWG. This tool is indispensable for electricians, but also for DIY enthusiasts who regularly work with cables and wires. The dimensions of the pliers are 14.48 x 5.99 x 1.52 cm and they weigh only 123 grams. The compact and lightweight design makes it easy to store and take the tool with you.
€5.50

Sofort verfügbar · 19 Stück · 1-3 days

Mounting bracket for ultrasonic sensor HC-SR04
Mounting bracket for ultrasonic sensor HC-SR04
Suitable angle bracket for ultrasonic sensor HC-SR04 or other products. Technical DataMaterial: AcrylicMaterial thickness: approx. 3mmInner diameter: 16mmFixing hole diameter: 3.8mm Note: The ultrasonic sensor is not included in the scope of delivery!
€0.70

Sofort verfügbar · 27 Stück · 1-3 days

Produktgalerie überspringen

Mehr von Frei

Reed sensor, reed contact, IP68, 11-16mm range, 10W switching capacity, 23x14.6x6mm, 500mA
Reed sensor, reed contact, IP68, 11-16mm range, 10W switching capacity, 23x14.6x6mm, 500mA
€3.80

Sofort verfügbar · 6 Stück · 1-3 days

1 channel relay module with infrared remote control
1 channel relay module with infrared remote control
€4.95

Sofort verfügbar · 7 Stück · 1-3 days

1 pair 6mm² / 10m solar string cable incl. mounted T4 plug
1 pair 6mm² / 10m solar string cable incl. mounted T4 plug
€31.00

Sofort verfügbar · 2 Stück · 1-3 days

10 segment LED bargraph display, 10 bars, 1x red / 3x yellow / 4x green / 1x blue
10 segment LED bargraph display, 10 bars, 1x red / 3x yellow / 4x green / 1x blue
€0.75

Sofort verfügbar · 43 Stück · 1-3 days

10 x jumper, short version, open, RM 2.54mm, black
10 x jumper, short version, open, RM 2.54mm, black
€1.00

Sofort verfügbar · 39 Stück · 1-3 days

12 segment linear LED bar / display, 8x green / 4x red
12 segment linear LED bar / display, 8x green / 4x red
€0.90

Sofort verfügbar · 86 Stück · 1-3 days

1N4001 - Rectifier diode, THT, 50V, 1A, DO41
1N4001 - Rectifier diode, THT, 50V, 1A, DO41
€0.08

Sofort verfügbar · 100+ Stück · 1-3 days

1N4148 - Switching diode, THT, 100V, 300mA, DO35
1N4148 - Switching diode, THT, 100V, 300mA, DO35
€0.04

Sofort verfügbar · 100+ Stück · 1-3 days

2 channel network relay module
2 channel network relay module
€35.50

Sofort verfügbar · 2 Stück · 1-3 days

28BYJ-48 Stepper motor 5V DC + ULN2003A driver board
28BYJ-48 Stepper motor 5V DC + ULN2003A driver board
€2.20

Artikel aktuell nicht lieferbar

Details
3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, blau, 1,2m
3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, blau, 1,2m
€2.70

Ab Hersteller · 55 Stück · 3-5 Tage

3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, rot, 1,2m
3-fach USB Ladekabel, Micro USB - USB Type C - 8-Pin, rot, 1,2m
€2.70

Sofort verfügbar · 9 Stück · 1-3 days

3-pole slide switch for breadboards
3-pole slide switch for breadboards
€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

3.5" Display Shield for Arduino Uno / Mega
3.5" Display Shield for Arduino Uno / Mega
€19.50

Artikel aktuell nicht lieferbar

Details
360° bendable HDMI adapter
360° bendable HDMI adapter
€2.82

Sofort verfügbar · 4 Stück · 1-3 days

4-channel infrared receiver incl. remote control
4-channel infrared receiver incl. remote control
€5.70

Artikel aktuell nicht lieferbar

Details
4-way desktop socket strip with USB charging function (2x 1A) black
4-way desktop socket strip with USB charging function (2x 1A) black
€17.10

Sofort verfügbar · 4 Stück · 1-3 days

Neu
4-way desktop socket strip with USB charging function (2x 1A) white
4-way desktop socket strip with USB charging function (2x 1A) white
€14.90

Sofort verfügbar · 5 Stück · 1-3 days

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V
€1.90

Sofort verfügbar · 100+ Stück · 1-3 days

5V 1 channel relay module with switch-on delay
5V 1 channel relay module with switch-on delay
€1.90

Sofort verfügbar · 19 Stück · 1-3 days

5V laser diode, ø6mm, with connection cable
5V laser diode, ø6mm, with connection cable
€0.75

Artikel aktuell nicht lieferbar

Details
Neu
6-way desktop socket strip with USB charging function (2x 1A) black
6-way desktop socket strip with USB charging function (2x 1A) black
€18.41

Sofort verfügbar · 1 Stück · 1-3 days

Details
ACS712 current sensor module 20A
ACS712 current sensor module 20A
€2.85

Sofort verfügbar · 25 Stück · 1-3 days

ACS712 current sensor module 30A
ACS712 current sensor module 30A
€2.85

Sofort verfügbar · 34 Stück · 1-3 days

ACS712 Current sensor module 5A
ACS712 Current sensor module 5A
€2.85

Sofort verfügbar · 3 Stück · 1-3 days

Activated carbon filter for smoke absorber
Activated carbon filter for smoke absorber
€1.90

Sofort verfügbar · 11 Stück · 1-3 days

Adapter 1x 6.3mm stereo jack plug - 2x 6.3mm stereo jack socket, black, 0.20m
Adapter 1x 6.3mm stereo jack plug - 2x 6.3mm stereo jack socket, black, 0.20m
€1.65

Sofort verfügbar · 1 Stück · 1-3 days

Adapter 3.5mm stereo jack plug - 6.3mm stereo jack socket, black, 0.20m
Adapter 3.5mm stereo jack plug - 6.3mm stereo jack socket, black, 0.20m
€0.78

Artikel aktuell nicht lieferbar

Details
Adapter cable 6.35mm stereo jack plug - 2x RCA plug 1.5m
Adapter cable 6.35mm stereo jack plug - 2x RCA plug 1.5m
€0.93

Ab Hersteller · 100+ Stück · 3-5 Tage

Details
Adapter cable 6.35mm stereo jack plug - 2x RCA socket 28cm
Adapter cable 6.35mm stereo jack plug - 2x RCA socket 28cm
€0.80

Ab Hersteller · 100+ Stück · 3-5 Tage

Details
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€2.56

Sofort verfügbar · 11 Stück · 1-3 days

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€2.90

Ab Hersteller · 100+ Stück · 3-5 Tage

Adapter cable HDMI type A plug DVI-D 24+1 plug black
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€3.85

Ab Hersteller · 100+ Stück · 3-5 Tage

Details
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€5.31

Sofort verfügbar · 1 Stück · 1-3 days

%
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Adapter cable HDMI type A plug DVI-D 24+1 plug black
Varianten ab €2.49
€7.87 €8.90 (11.57% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

Kunden kauften auch
Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Pico WH is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.The Raspberry Pi Pico W is designed as a low-cost yet flexible development platform for the RP2040 with a 2.4 GHz wireless interface and the following key features:RP2040 microcontroller with 2 MB flash memoryIntegrated 2.4 GHz single-band wireless interface (802.11n)Micro USB-B connector for power and data (and for reprogramming the flash)40-pin 21mmx51mm 'DIP' PCB, 1mm thick, with 0.1" through-holes, also with edge decorations26 multifunctional 3.3 V general purpose inputs and outputs (GPIO) 23 GPIOs are purely digital, three of which are also ADC-capable Can be surface-mounted as a module3-pin ARM Serial Wire Debug Port (SWD)Simple but highly flexible power supply architectureVarious options for easy power supply via micro USB, external power supplies or batteries - High quality, low cost, high availabilityComprehensive SDK, software examples and documentation3-pin JTAG connector40-pin pre-soldered pin headerDetailed information about the RP2040 microcontroller can be found in the RP2040 datasheet. The most important features are:Dual-core Cortex M0+ with up to 133MHzOn-chip PLL enables variable core frequency264kByte multi-bank high performance SRAMExternal Quad SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cacheHigh-performance full crossbar bus structureOn-board USB1.1 (device or host)30 multifunction I/O (four can be used for ADC)1.8-3.3 V I/O voltage12-bit 500ksps analogue-to-digital converter (ADC)Various digital peripherals2 x UART, 2 × I2C, 2 × SPI, 16 x PWM channels1 x timer with 4 alarms, 1 x real-time clock2 x programmable I/O blocks (PIO), 8 state machines in totalFlexible, user-programmable high-speed I/OCan emulate interfaces such as SD card and VGAFor more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.
€7.20

Sofort verfügbar · 100+ Stück · 1-3 days

Mounting bracket for ultrasonic sensor HC-SR04
Mounting bracket for ultrasonic sensor HC-SR04
Suitable angle bracket for ultrasonic sensor HC-SR04 or other products. Technical DataMaterial: AcrylicMaterial thickness: approx. 3mmInner diameter: 16mmFixing hole diameter: 3.8mm Note: The ultrasonic sensor is not included in the scope of delivery!
€0.70

Sofort verfügbar · 27 Stück · 1-3 days

Battery holder for 3x Mignon AA with 150mm connection cable and closed housing
Battery holder for 3x Mignon AA with 150mm connection cable and closed housing
Goobay 3x AA (Mignon) battery holderloose cable ends, switchable, water-repellentThe Goobay battery holder can be installed in or attached to a battery-operated device.Three AA batteries can be inserted into the water-repellent black plastic housing.The AA battery compartment holds the AA batteries securely and firmly in place and ensures a constant power supply.The AA battery holder is equipped with an on/off switch and loose cable ends.Technical dataConnection, type: loose cable endsSpecial feature: switchable, water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 47.5 mmColour: blackColour version: BlackHeight: 19.5 mmLength: 69 mmsuitable battery size: AA (Mignon)suitable IEC battery types: FR6, HR6, LR6
€0.82

Sofort verfügbar · 22 Stück · 1-3 days

40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm
40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm
Jumper/Dupont cable set - Versatile connection for electronics projects The Jumper/Dupont cable set is the ideal solution for anyone looking for a reliable and flexible connection option for their electronics projects. Consisting of three different cable types - female-female, male-male and female-male - this set offers not only adaptability through the 40 separable wires of each cable, but also the precision that modern microcontroller projects require. With a standardised 2.54 mm pin spacing and high-quality AWG 28 copper inner conductors, this cable set enables efficient signal transmission. It is perfect for use with Raspberry Pi, Arduino and other microcontrollers to connect them to breadboards, sensors and modules, among other things. Features at a glance Compatibility: Ideal for Raspberry Pi, Arduino and other microcontrollers. Various cable types: Includes female-female, male-male, and female-male cables. Flexibility: Each of the 40 individual wires of the cable can be separated, allowing individual customisation. Technical data 3 cable types included: female-female, male-male, female-male Each cable consists of 40 cores Cores can be used separately Pin spacing: 2.54 mm (pitch) Inner conductor: AWG 28 copper Length: 20cm Scope of delivery 3x Jumper / Dupont cable (20cm): 1x female-female 1x male-male 1x female-male
€4.90

Sofort verfügbar · 100+ Stück · 1-3 days

seeed Grove - Piezo buzzer / Active buzzer
seeed Grove - Piezo buzzer / Active buzzer
Seeed Grove - Piezo Buzzer/Active Buzzer The Grove buzzer is an active piezoelectric signalling device that has a Grove interface and can therefore be integrated directly into microcontroller projects. With a volume of over 85 dB, it generates a clear acoustic signal. The buzzer can use both digital and PWM outputs to generate sounds at different pitches and intervals. Its low current consumption behaviour, typically below 20 mA, makes it suitable for use in energy-efficient applications. The resonant frequency range is 2300 ± 300 Hz. The buzzer is designed for applications where acoustic feedback or signalling is required. These include man-machine interfaces, microwave devices, doorbells, alarm devices, electrical alarms or timers. The component is suitable as a supplement for Arduino projects and can be connected directly to an Arduino board using a Grove Base Shield V2.0. Thanks to its compact dimensions of 24 × 20 × 9.8 mm, it can also be used in space-limited setups. The piezo buzzer uses piezoelectric materials to convert mechanical vibrations into acoustic signals. The sound is generated by electrical control, either continuously via a digital signal or variably via PWM (pulse width modulation). The Grove interface eliminates the need for manual wiring, making it easy to use in development projects. Features at a glance Active piezo buzzer with Grove connection Volume over 85 dB at resonance frequency Resonant frequency: 2300 ± 300 Hz Low current consumption below 20 mA Utilisation via digital outputs or PWM Compatibility Arduino with Grove Base Shield V2.0 Raspberry Pi with Grove customisation Technical specifications Operating voltage: 3.3-5 V Current consumption: < 20 mA (typical), max. 100 mA Volume: ≥ 85 dB Resonant frequency: 2300 ± 300 Hz Dimensions: 24 mm × 20 mm × 9.8 mm Weight: 10 g Other data Recommended accessories: Grove Base Shield V2.0 Scope of delivery1x module1x Grove connection cable Links Eagle layout V1.1 Source code V1.0 Transistor data sheet S9013 CDC files
€1.90

Sofort verfügbar · 37 Stück · 1-3 days

seeed Grove - Sliding potentiometer
seeed Grove - Sliding potentiometer
Seeed Grove - Slide Potentiometer The Grove - Slide Potentiometer module integrates a linear variable resistor with a maximum resistance of 10KΩ. When the regulator is moved from one side to the other, the output voltage varies from 0 V to the applied operating voltage (Vcc). The module is connected to other Grove modules via a standardised 4-pin Grove cable. Three of the pins are connected to OUT (pin 1), Vcc (pin 3) and GND (pin 4), while the fourth pin (pin 2) is connected to a green LED on the board. The LED visually indicates the change in resistance of the potentiometer. The module uses a linear resistance curve, resulting in a smooth output of parameters to the board during adjustment. Durability is supported by a rotational life of over 15,000 cycles. The use of the Grove standard socket allows for easy "plug and play", making the module versatile for various applications. The Grove - Slide Potentiometer can be used in various applications, including as a volume control (BoomBox), voltage divider, radio control, brightness control for lamps and as a control element for game controls. Features at a glance Linear variable resistor with 10KΩ maximum resistance Output voltage from 0V to Vcc Grove standard connection for easy integration Green LED for visual indication of resistance change Over 15,000 rotation cycles lifetime Compatibility Arduino platforms Raspberry Pi platforms Grove systems Technical specifications Dimensions: 24 mm x 60 mm Gross weight: 13 g Net weight: 8.6 g Voltage: 3.3V/5V operating voltage, 30V maximum voltage Maximum current: 30 mA Total resistance: 10KΩ Stroke distance: 30 mm Resistance tolerance: ±20% Rotation life: >15,000 cycles Power supply: External source required (no battery included) Other data Integrated LED for visual resistance display Scope of delivery 1x Grove - Slide Potentiometer Links Design files Sliding Potentiometer Circuit diagram Sliding Potentiometer Data sheet Sliding Potentiometer CDC files Sliding Potentiometer
€6.00

Sofort verfügbar · 9 Stück · 1-3 days

seeed Grove - Wrapper 1x2, blue, pack of 4
seeed Grove - Wrapper 1x2, blue, pack of 4
Seeed Grove - Wrapper for LEGO and Makeblock Modules Grove - Wrapper is primarily intended to protect Grove modules. The design as a semi-open space does not affect the use of Grove modules. This saves effort when customising modules and makes it easy to present projects. The use of the Grove wrapper ensures a clear and tidy presentation. In addition, compatibility with LEGO bricks, Makeblock and other systems means that the project can be flexibly expanded and adapted to different environments. The mechanical design of the Grove - Wrapper makes it easy to assemble and disassemble the modules. Grove - Wrapper utilises a flexible locking system that facilitates the installation and replacement of Grove modules. The ability to use different coloured wrappers and connect the modules together like LEGO elements makes the product particularly suitable for building electronic LEGO projects. Features at a glance Construction of electronic LEGO projects with coloured wrappers Compatible with LEGO and Makeblock modules Flexible locking system for easy installation and replacement of Grove modules Semi-open space protects and does not interfere with the function of the modules Compatibility with LEGO modules Makeblock modules Technical data Dimensions of large wrapper module: 50 × 25 × 13 mm Dimensions of small wrapper module: 25 × 25 × 13 mm Material: ABS Colour: Blue Product dimensions packaging: 110 mm x 80 mm x 15 mm Weight: 25 g Power supply: External power source required (no battery included) Other data Suitable for easy presentation of projects Promotes creative extensions through connection with LEGO and Makeblock Scope of delivery 4x Grove - Blue Wrapper 1*2 Links Example project Connected LEGO Desk Houses
€1.90

Sofort verfügbar · 54 Stück · 1-3 days

seeed Grove - Wrapper 1x1, blue, pack of 4
seeed Grove - Wrapper 1x1, blue, pack of 4
Seeed Grove - Blue Wrapper 11 (4 PCS pack) Grove - BlueWrapper 11 is a module mounting system specifically designed to securely mount and integrate Grove modules into Lego or Makeblock based projects. The design of the wrapper utilises a semi-open housing, which does not restrict the use of Grove modules. The wrapper protects the modules and facilitates the presentation of projects in a structured way. The mechanical design allows easy mounting and dismounting of the modules. The product offers flexible mounting options and supports screw mounting with M2 or M4 screws. The ability to connect the wrappers like Lego modules allows a modular construction system to be created. The wrappers are available in different colours such as blue, green, yellow and red, allowing projects to be colour-coded. Grove - Blue Wrapper 1*1 can be used to safely build electronic projects, especially those based on Lego or Makeblock environments. The flexibility of the attachment simplifies the maintenance and replacement of Grove modules. The semi-open design ensures that module functions remain unrestricted while providing protection and stability for the project. Typical applications include DIY projects, robotics and educational applications. The Grove wrapper system is suitable for the protection, presentation and modular construction of electronic projects. It facilitates the integration of Grove modules into existing modular systems and ensures secure fastening. The option of colour coding simplifies the organisation of complex circuits. Features at a glance Semi-open design allows unrestricted access to Grove modules Compatible with Lego and Makeblock systems Flexible quick release for easy installation and replacement of modules Support for screw connection with M2 and M4 screws Colour differentiation through different wrapper colours Compatibility Grove modules Lego systems Makeblock systems Technical Data Dimensions: 25mm x 25mm x 13mm Material: ABS Colours: Blue, Green, Yellow, Red Weight: 25g (total for the set) Battery: Not included Other data Design supports modular extensions through Lego-like connection options Scope of delivery 4x Grove - BlueWrapper 1*1 Links Mechanical diagram Assembly instructions
€1.90

Sofort verfügbar · 20 Stück · 1-3 days

seeed Grove - Passive buzzer
seeed Grove - Passive buzzer
Seeed Grove - Passive Buzzer Grove - Passive Buzzer is a low-cost, tunable passive buzzer. It is a 3-5V passive buzzer in which different tones can be generated by changing the PWM frequency, creating a so-called "buzzer music" signal. The buzzer can also be used as an alarm in security applications. Piezo-passive buzzers must be connected to an audio output circuit to generate sounds. The frequency of the generated sound is controllable and the current consumption is low, typically less than 20 mA and not more than 100 mA. Generally, a piezoelectric buzzer is driven by a square wave signal (VP-P). The piezo-passive buzzer is characterised by its compact design, low weight, thin construction, low energy consumption, good reliability and low cost. Grove - Passive Buzzer can be used in a variety of applications. It is suitable for use in electronic watches, pocket calculators, electronic doorbells and electronic toys. Compatibility with the Grove port enables a simple plug-and-play connection. Piezo-passive buzzers convert electrical signals into audible tones, whereby the pitch is determined by the frequency of the input signal. Due to its low power consumption, the Grove - Passive Buzzer is particularly suitable for battery-powered applications and projects where energy efficiency plays a role. Features at a glance Passive design with controllable frequency Low power consumption below 20 mA Compatible with Grove port for easy integration Compatibility with Arduino systems Raspberry Pi with Grove Base HAT or Base Shield Technical specifications Voltage range: 3V-5V Resonant frequency: 2700 Hz Sound level: >80 dB Operating temperature range: -20 °C to 70 °C Dimensions: 20 mm x 20 mm x 10 mm Weight: 3 g Other data Passive piezoelectric buzzer, requires square-wave signal (VP-P) for operation Suitable for electronic watches, calculators, doorbells and toys Scope of delivery 1 x Grove - Passive buzzer 1 x Grove cable Left Data sheet MLT-8530 Circuit diagram Grove Passive Buzzer
€2.80

Sofort verfügbar · 27 Stück · 1-3 days

seeed Grove - Adapter cable, 4 pin Dupont male - 4 pin Grove male, pack of 5
seeed Grove - Adapter cable, 4 pin Dupont male - 4 pin Grove male, pack of 5
Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack) The Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable is a connection cable set specifically designed to integrate the Grove system into open development platforms such as breadboards. The Grove platform is a plug-and-play system with a specialised connector system that can be used with this cable set in environments that do not have a native Grove interface. The cable's male jumper connectors are compatible with standard pin headers, allowing direct connection to breadboards and various microcontrollers. The supplied cables allow flexible connection between Grove modules and platforms such as the Raspberry Pi, Cubieboard or BeagleBone. For Arduino and Arduino Mega users, the Grove Base Shield can also be used as an alternative, which offers a more direct and convenient connection solution. The connection cables are suitable for all applications where a transition from the Grove system to an open interface is required. The product serves as an interface between Grove components and plug-in systems that have pin headers with a 2.54 mm pitch. The Grove side of the cable uses a JST 2.0mm connector with a latching mechanism, while the male jumper side can be plugged into typical breadboard pins. The combination of both ends allows the use of Grove modules without base shield or native Grove support. Features at a glance Conversion cable from Grove connector to male jumper Integration of the Grove system in breadboards and microcontrollers without Grove port Suitable for Raspberry Pi, Cubieboard, BeagleBone Compatibility Grove modules (Seeed Studio) Breadboards with 2.54 mm pin headers Raspberry Pi, Cubieboard, BeagleBone Technical specifications Weight: 18 g (total weight of the package) Scope of delivery 5x Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable
€2.56

Sofort verfügbar · 6 Stück · 1-3 days

Neu
Transport box for up to 10 Mignon (AA) / Micro (AAA) batteries - Colour: transparent
Transport box for up to 10 Mignon (AA) / Micro (AAA) batteries - Colour: transparent
Plastic transport box suitable for up to 10 Mignon rechargeable batteries (AA) or up to 10 micro rechargeable batteries / batteries (AAA) Scope of delivery: 1 box
€1.30

Sofort verfügbar · 22 Stück · 1-3 days

Raspberry Pi
Arduino
Yubico
Idealo
Geizhals.de
Cookie-Voreinstellungen
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...