€249.90
Jetzt Bestellen und
125 Berrys sichern
125 Berrys sichern
Sofort verfügbar · 11 Stück · 1-3 days
-
Sofort verfügbar
11 Stück : 1-3 days
Wird oft zusammengekauft
Produktinformation
Beschreibung
Produktinformationen "Arduino Tinkerkit Braccio robot"
Tinkerkit Braccio Robot
The TinkerKit Braccio is a fully functional robotic arm that is controlled via Arduino. It can be assembled in various configurations for tasks such as moving objects. A camera or solar panel can also be attached.
Features at a glance
Notes
The TinkerKit Braccio is a fully functional robotic arm that is controlled via Arduino. It can be assembled in various configurations for tasks such as moving objects. A camera or solar panel can also be attached.
Features at a glance
- Fully functional robotic arm
- Various configuration options
- Compatible with camera and solar panel
- Recommended power supply: 5 VDC at 4000 mA
- On-board voltage regulator for higher voltages
- 21 plastic parts, 63 screws, 16 washers, 7 hexagon nuts, 2 springs
- Servo motors: 2 x SR 311, 4 x SR 431
- Arduino compatible shield
- Power supply: 5V, 4A
- Weight: 792 g
- Maximum range: 80 cm
- Maximum height: 52 cm
- Base width: 14 cm
- Gripper width: 90 mm
- Cable length: 40 cm
- Maximum load at 32 cm reach: 150 g
- Maximum load with minimum configuration: 400 g
- Braccio Shield: Dimensions 2.7 x 2.1 inch, four screw holes, odd pin spacing
- SpringRC SR431: PWM analogue, torque at 4.8V: 12.2 kg-cm, at 6.0V: 14.5 kg-cm, weight: 62.0 g, 180° rotation range
- SpringRC SR311: PWM analogue, torque at 4.8V: 3.1 kg-cm, at 6.0V: 3.8 kg-cm, weight: 27.0 g, 180° rotation range
- 21x plastic parts
- 63x screws
- 16x washers
- 7x hexagon nuts
- 2x springs
- Servo motors: 2 x SR 311, 4 x SR 431
- 1x Arduino compatible shield
- 1x power supply unit 5V, 4A
- 1x Phillips screwdriver
- 1x spiral cable sheath
Notes
- Please note that the Arduino board is not included.
Eigenschaften
| Zolltarifnummer: | 85423990 |
|---|---|
| Brand: | Arduino |
| Country of Origin: | Italy |
| EAN: | 7630049200609 |
| Gross Weight (kg): | 1.200 |
| Manufacturer ID: | T050000 |
| Product ID: | T050000 |
Video
Manufacturer and safety information
Manufacturer information
Arduino S.r.l.
Via Andrea Appiani 25
IT 20900 Monza MB
https://www.arduino.cc
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
Arduino S.r.l.
Via Andrea Appiani 25
IT 20900 Monza MB
https://www.arduino.cc
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Only use the product in accordance with the manufacturer's instructions.
- Keep the robot arm away from body parts during operation.
- Switch off the robot arm before carrying out maintenance or cleaning work.
- Ensure that all connections are secure and correctly installed.
- Do not operate the product in damp or wet environments.
- Only charge batteries with the recommended chargers.
- Do not overload the robotic arm to avoid damage.
- Observe electrical safety measures when working with internal components.
- Keep away from small children to prevent injury.
- Dispose of defective parts in accordance with regional regulations for electronic waste.
- Dispose of batteries and rechargeable batteries properly, do not dispose of them in household waste.
- Dispose of plastic and metal parts in suitable recycling containers.
- Dispose of electronic components in an environmentally friendly manner.
- Recycle packaging materials where possible.
Bewertungen
0
Anmelden
Produktgalerie überspringen
Kunden kauften auch
BerryBase 200-piece Jumper Wire Connector Kit, JST SM/Dupont, 2.54mm, 2-5 pin male & female
€3.90
200Pcs/Box 2.54mm Pitch JST SM/Dupont Jumper Wire Connector Kit - 2/3/4/5 Pin Male/Female Housing Crimp Terminal Adapter
The 200Pcs/Box JST SM/Dupont Jumper Wire Connector Kit offers a comprehensive selection of connectors for versatile applications in electronic projects. Whether for household appliances, LED lighting, electronic toys, batteries or printed circuit boards - this kit contains the most common jumper wire connectors to make connections easily and efficiently. With a pitch of 2.54 mm and a robust plastic and metal construction, it is a reliable choice for hobbyists and professionals alike.
Flexible in use:
The kit contains various male and female connectors in 2-, 3-, 4- and 5-pin versions, which are perfect for flexible wiring in a variety of projects. Thanks to the included crimp terminals, connections can be easily made without the need for additional tools or accessories.
Differences to other kits:
Unlike conventional connector kits, this set is characterised by a diverse pin configuration (2, 3, 4, 5 pin) and high-quality materials. It provides a robust connection for precise and secure assembly, ideal for demanding electronics applications. Its compatibility with household appliances, LEDs, circuits and other electrical devices makes it a versatile and valuable addition to any project.
New features of the kit:
Crimp terminal adapter: Enables quick and secure connections without soldering.
Versatile pin configurations: Choice of 2, 3, 4 and 5 pins.
High-quality materials: Robust plastic housing and durable metal pins for a long service life and reliable performance.
Compatibility with other components:
The 2.54 mm connectors are fully compatible with other common electronic components and offer seamless connections for household appliances, LED applications, batteries and circuits. Whether as a replacement part or for new projects, this kit covers a wide range of applications.
Technical data and other features:
Material: Plastic + metal
Pitch: 2.54 mm / 0.1 inch
Colours: Black, silver
Pin configuration: 2 pin, 3 pin, 4 pin, 5 pin
Application: Ideal for household appliances, LED lighting, batteries, toys, circuit boards and circuits
Box size: 130 x 66 x 22 mm (L x W x H)
Scope of delivery:
5x 2pin male + 5x 2pin female
5x 3pin male + 5x 3pin female
5x 4pin male + 5x 4pin female
5x 5Pin Male + 5x 5Pin Female
80x Pin Connector Terminals Male
80x Pin Connector Terminals Female
Total: 200 pieces JST SM Connector Housing
The 200Pcs/box JST SM/Dupont Jumper Wire Connector Kit is the perfect accessory for electronics projects of all kinds where reliable connections and flexibility are crucial.
Sofort verfügbar · 100+ Stück · 1-3 days
Neu
Cable with JST XH 2.54mm connector, AWG26, 20cm
€0.39
Cable with JST XH 2.54 connector and open cable endTechnical dataConnectors:XH2.54 connector, 4 pinopen cable endPitch: 2.54mmInner conductor: AWG 26Length: 20 cm
Varianten ab €0.33
Sofort verfügbar · 23 Stück · 1-3 days
Neu
Cable with JST XH 2.54mm connector, AWG26, 20cm
€0.36
Cable with JST XH 2.54 connector and open cable endTechnical dataConnectors:XH2.54 plug, 3 pinopen cable endPitch: 2.54mmInner conductor: AWG 26Length: 20 cm
Varianten ab €0.33
Sofort verfügbar · 64 Stück · 1-3 days
DFRobot Digital Sensor Cable for Arduino IO Shields, max 50V / 1000mA, pack of 10
€4.90
Gravity: Digital Sensor Cable for Arduino - 30cm (pack of 10)
These specially designed digital sensor cables connect most of our digital sensors to the IO board, ideal for the popular IO expansion shield. The price includes 10 of these cables.
Features at a glance
Specially designed for IO expansion shields and sensors.
Enables simple and reliable connection between digital sensors and the IO board.
Technical Data
Length: 30cm
Maximum voltage: <50V
Maximum current: <1000mA
One servo type connector with signal, GND, PWR.
One 3-pin JST connector
Red: PWRBlack: GND Green: Signal
Scope of delivery
10x digital sensor cable for Arduino
Sofort verfügbar · 10 Stück · 1-3 days
Waveshare 13-piece sensor set: Suitable for projects with Arduino / Raspberry Pi Pico
€42.80
Sensor package from Waveshare The Waveshare sensor set contains 13 different sensors that specialise in detecting environmental conditions such as gas, colour, flame, humidity, temperature and much more. The sensor set is explicitly designed for use with Arduino and Raspberry Pi Pico platforms, making it ideal for beginners and experienced developers. Thecompatibility of the set with popular microcontroller platforms such as Arduino and Raspberry Pi Pico significantly expands its application possibilities. The included custom connector jumper cables enable quick and easy connection between the sensors and the microcontrollers. This universal compatibility and the technical flexibility of each sensor, including operating voltage, output signal type and communication protocols, make the Waveshare 13-piece sensor set an indispensable tool for anyone who requires precise acquisition and processing of environmental data in their projects.
Features at a glance
MQ-5 gas sensor: Sensitive for LPG, natural gas, coal gas
Colour sensor: Detects static colours
Flame sensor: Sensitive to the flame spectrum
Hall sensor: 49E Hall sensor
Infrared reflection sensor: Reflective infrared transceiver
Laser sensor: Laser sensor
Moisture sensor: Fork-type soil moisture sensor
Rotation sensor: Detects clockwise/counterclockwise rotations
Noise sensor: On-board LM386 audio power amplifier
Temperature humidity sensor: DHT11 temperature and humidity sensor
Tilt sensor: Detects shake signal
UV sensor: Ultraviolet sensor
Liquid level sensor: Detects the liquid level
Areas of application
Intelligent home automation system
Environmental monitoring station
Robot with navigation and obstacle detection
Interactive learning platform for children
Security and monitoring system
Technical specifications
Product details: Sensor package
MQ-5 gas sensor: Sensitive to LPG, natural gas, coal gas - Application: Gas leak detector
Colour sensor: Detects static colour - Application: Sorting by colour, colour matching
Flame sensor: Sensitive to the flame spectrum - Application: Fire detection, fire robot, fire alarm
Hall sensor: 49E Hall sensor - Application: Motor speed measurement, object position detection
Infrared reflection sensor: Reflective infrared transceiver - Application: Robot path tracking, obstacle avoidance car, line counter
Laser sensor: Laser sensor - Application: Obstacle detection, line counter, intelligent robot
Moisture sensor: Fork-type soil moisture sensor - Application: Automatic irrigation system, soil moisture detection in flower pot
Rotation sensor: Detects clockwise/counterclockwise rotations - Application: Positioning in industrial control systems
Noise sensor: On-board LM386 audio power amplifier - Application: Ambient noise detection, noise level detection
Temperature humidity sensor: DHT11 temperature and humidity sensor - Application: Ambient temperature and humidity detection
Tilt sensor: Detects shake signal - Application: Shake detection, wax alarm, intelligent car
UV sensor: Ultraviolet sensor - Application: UV tester, outdoor UV detector, germicidal lamp
Liquid level sensor: Detects the liquid level - Application: Water level alarm
Scope of delivery
1x MQ-5 gas sensor
1x colour sensor
1x flame sensor
1x Hall sensor
1x infrared reflection sensor
1x laser sensor
1x humidity sensor
1x rotation sensor
1x noise sensor
1x temperature/humidity sensor
1x tilt sensor
1x UV sensor
1x liquid level sensor
3x 3-pin custom connector jumper cable
4x 4-pin custom connector jumper cable
1x 5-pin custom connector jumper cable
Wiki: https://www.waveshare.com/wiki/Sensors_Pack
Sofort verfügbar · 1 Stück · 1-3 days
Arduino sensor kit
€35.00
Arduino Sensor Kit - Base
The Arduino Sensor Kit is designed for makers who are just starting to use Arduino to explore the wide world of electronics and programming. This kit shows how to connect and program basic Grove modules that include both sensors and actuators. Grove is an open-source, modular and ready-to-use toolset that uses a building block approach to assembling electronics. This kit includes a base shield to which the various Grove modules can be connected individually or in various combinations to create fun and exciting projects.
Features at a glance
Base Shield with 16 Grove connections
7 digital connections
4 analogue connections
4 I2C connections
1 UART port
10 Grove modules for a wide range of projects
Compatibility
Compatible with Arduino UNO and Arduino IDE
Technical specifications
1 Base Shield for Arduino UNO
7 digital connections
4 analogue connections
4 I2C connections
1 UART connection
10 Grove modules: LED, button, potentiometer, buzzer, light sensor, sound sensor, air pressure sensor, temperature sensor, acceleration sensor, OLED screen
6 Grove cables
Scope of delivery
1x Arduino Sensor Kit - Base (without Arduino UNO Board)
Links to
To the BerryBase Blog
Sofort verfügbar · 2 Stück · 1-3 days
40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm
€4.40
Jumper/Dupont cable set - Quick and easy connection for electronics The Jumper/Dupont cable set is the ideal solution for anyone looking for a reliable and flexible connection option for their electronics projects. Consisting of three different cable types - female-female, male-male and female-male - this set not only offers adaptability through the 40 separable wires of each cable, but also the precision that modern microcontroller projects require. With a standardised 2.54 mm pin spacing and high-quality AWG 28 copper inner conductors, this cable set enables efficient signal transmission. It is perfect for use with Raspberry Pi, Arduino and other microcontrollers to connect them to breadboards, sensors and modules, among others. Features at a glance
Compatibility: Perfectly suited for Raspberry Pi, Arduino and other microcontrollers.
Various cable types: Includes female-female, male-male, and female-male cables.
Flexibility: Each of the cables can be split into 40 individual wires, which opens up a wide range of possible uses.
Versatile for prototyping and development projects.
Enables the connection of microcontrollers with breadboards, sensors, modules, etc.
Technical data
3 cable types: Female-Female, Male-Male, Female-Male
Each cable has 40 cores
Cores can be separated
Pin spacing: 2.54mm (pitch)
Inner conductor: AWG 28 copper
Length: 10cm
Scope of delivery
3x Jumper / Dupont cable (10cm):
1x female-female
1x male-male
1x female-male
Sofort verfügbar · 21 Stück · 1-3 days
40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm
€4.90
Jumper/Dupont cable set - Versatile connection for electronics projects
The Jumper/Dupont cable set is the ideal solution for anyone looking for a reliable and flexible connection option for their electronics projects. Consisting of three different cable types - female-female, male-male and female-male - this set offers not only adaptability through the 40 separable wires of each cable, but also the precision that modern microcontroller projects require. With a standardised 2.54 mm pin spacing and high-quality AWG 28 copper inner conductors, this cable set enables efficient signal transmission. It is perfect for use with Raspberry Pi, Arduino and other microcontrollers to connect them to breadboards, sensors and modules, among other things.
Features at a glance
Compatibility: Ideal for Raspberry Pi, Arduino and other microcontrollers.
Various cable types: Includes female-female, male-male, and female-male cables.
Flexibility: Each of the 40 individual wires of the cable can be separated, allowing individual customisation.
Technical data
3 cable types included: female-female, male-male, female-male
Each cable consists of 40 cores
Cores can be used separately
Pin spacing: 2.54 mm (pitch)
Inner conductor: AWG 28 copper
Length: 20cm
Scope of delivery
3x Jumper / Dupont cable (20cm):
1x female-female
1x male-male
1x female-male
Sofort verfügbar · 100+ Stück · 1-3 days
Jumper box / set with 140 jumpers in 14 lengths for breadboards
€3.70
Jumper box / set with 140 jumpers in 14 lengths for breadboards
This jumper set for breadboards consists of 140 colour-coded jumpers in 14 different lengths, ideal for use in prototyping and development projects. The variety of lengths offers flexible connection options on the breadboard.
Features at a glance
140 jumpers in 14 lengths: Offers a wide selection for different connection distances on the breadboard.
Colour coding: Enables easy differentiation and organisation of the jumpers.
Storage box: Keeps the jumpers organised and easy to access.
Technical data
Kit contains: 140 jumpers (10 jumpers in 14 different lengths each)
Jumpers are colour coded
Storage box included
Scope of delivery
1x jumper box set with 140 jumpers (10 jumpers in 14 different lengths each)
Sofort verfügbar · 84 Stück · 1-3 days
Breadboard with 400 contacts
€1.50
Breadboard with 400 contacts
This breadboard makes it possible to quickly build simple, on-the-fly circuits. It can be extended by stringing several units together. The use of ABS plastic and the latches on the sides allow flexible and stable assembly.
Features at a glance
Enables quick and easy assembly of flying circuits.
Several boards can be connected using the latches on the sides.
Technical data
Contacts: 400
Dimensions: 83 x 55 mm
Grid: 2.54 mm
Material: ABS plastic
Fastening: Double-sided adhesive tape on the back
Scope of delivery
1x breadboard with 400 contacts
Sofort verfügbar · 100+ Stück · 1-3 days
Arduino Uno Rev3
€20.70
Arduino Uno Rev3 Microcontroller Board
The Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (6 of which can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic resonator, a USB connection, a power socket, an ICSP header and a reset button. It contains everything necessary to support the microcontroller; simply connect to a computer with a USB cable or start with an AC-DC adapter or battery. You can experiment with your Uno without worrying too much about mistakes - worst case scenario, replace the chip for a few dollars and start over.
Features at a glance
14 digital input/output pins, 6 of which are PWM-capable
6 analogue inputs
16 MHz ceramic resonator
USB connection and power socket
ICSP header and reset button
Supported by various Arduino software (IDE) versions
Technical specifications
Microcontroller: ATmega328P
Operating voltage: 5V
Recommended input voltage: 7-12V
Maximum input voltage: 6-20V
Digital I/O pins: 14 (6 of which are PWM-capable)
Analogue input pins: 6
DC current per I/O pin: 20 mA
DC current for 3.3V pin: 50 mA
Flash memory: 32 KB (ATmega328P), of which 0.5 KB for bootloader
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock frequency: 16 MHz
LED_BUILTIN: 13
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g
Scope of delivery
1x Arduino Uno Rev3 microcontroller board
Links to
To the BerryBase Blog
Datasheet
Sofort verfügbar · 100+ Stück · 1-3 days
Analogue 2-axis joystick module with select button
€1.55
2-axis joystick module with analogue outputs and a select button (centre button).
Can also be operated with the Raspbery Pi together with an MCP3008.
Technical data
5V operating voltage
2 axes (x, y)
Operating LED
Connections accessible via pin header (RM 2.54mm)
Pin assignment:
- =Ground
+=5V operating voltage
B=Button output
X=Output for X-axis
Y=Output for Y-axis
Board dimensions: approx. 40.10 x 26.05 mm (without pin header)
Diameter of mounting holes: 3.1 mm
Scope of delivery
Joystick module
rubberised navigation cap
Sofort verfügbar · 20 Stück · 1-3 days
Produktgalerie überspringen
Mehr von Arduino
Arduino CTC GO! Core Module, 8x Arduino UNO Wi-Fi Rev2, SD card reader, 9V batteries, MINT learning kit
€1,299.90
Sofort verfügbar · 1 Stück · 1-3 days
Arduino Edge Control control module for outdoor use, Bluetooth, sensor connections, 64MHz, 1MB, 12V
€199.90
Sofort verfügbar · 17 Stück · 1-3 days
Arduino GIGA Display Bundle, GIGA R1 WiFi, touchscreen, digital microphone, 6-axis IMU, IoT
€129.90
Sofort verfügbar · 9 Stück · 1-3 days
%
B-Ware
