Arduino Nano Matter, IoT board, Cortex-M33, 1536kB Flash, 256kB RAM, Thread, BLE 5.3, USB-C, 3.3V
Product number: ABX00112
Product information "Arduino Nano Matter, IoT board, Cortex-M33, 1536kB Flash, 256kB RAM, Thread, BLE 5.3, USB-C, 3.3V"
The Arduino Nano Matter is a compact microcontroller for the development of energy-efficient, wirelessly networked IoT devices based on open standards. It supports the Matter protocol, a manufacturer-independent smart home standard for secure and reliable device communication over IP. Matter ensures standardised control and compatibility with platforms such as Apple HomeKit, Google Home and Amazon Alexa.
Wireless communication takes place via Thread, an IPv6-based mesh network protocol that was specially developed for smart home devices. Thread enables stable, low-power connections with automatic forwarding and self-healing in the event of network failures.
With integrated support for Zigbee, Bluetooth Low Energy and the Arduino IoT Cloud, the controller is versatile and can be used for sensors, actuators, controllers or gateways in the smart home sector.
Features at a glance
- Matter-compatible for fast prototyping
- Based on the MGM240SD22VNA with 32-bit Arm Cortex-M33
- Secure Vault technology for high security
- Multi-protocol connectivity: 802.15.4 (Thread) and Bluetooth Low Energy
- Compact size with nano-family pinout
- Debugging via USB via SWD interface
- Low energy consumption for battery-powered IoT devices
- Compatible with the Arduino IoT Cloud
- Matter, Zigbee, OpenThread
- Arduino IoT Cloud
- Microprocessor: MGM240SD22VNA (32-bit Arm Cortex-M33 with DSP and FPU)
- Connectivity: 802.15.4 (Thread), Bluetooth Low Energy 5.3, Bluetooth Mesh, Matter
- Memory: 1536 kB Flash, 256 kB RAM
- USB port: USB-C
- Security: Secure Vault High
- Debugging: Via USB
- UART: 2
- I2C: 2
- SPI: 2
- Digital I/O pins: 22
- Analogue inputs: 20 (12 bit resolution)
- DAC: 4 (8-12 bit resolution)
- PWM pins: 22 (max. 5 can be used simultaneously)
- External interrupts: Available on all digital pins
- User interface: RGB LED, user button
- Operating voltage: 3.3 V
- Input voltage (VIN): 5 V
- Current source per I/O pin: 40 mA
- Current sink per I/O pin: 28 mA
- Clock frequency: 78 MHz
- On-board 2.4 GHz antenna
- Dimensions: 18 x 45 mm
- Temperature range: -40 °C to +85 °C
- Enables rapid development of IoT and smart home applications
| Zolltarifnummer: | 85423990 |
|---|---|
| Brand: | Arduino |
| Country of Origin: | Italy |
| EAN: | 7630049204867 |
| Gross Weight (kg): | 0.030 |
| Manufacturer ID: | ABX00112 |
| Product ID: | ABX00112 |
Arduino
Arduino: The all-rounder among IoT platforms
Hardly any other platform offers makers such a high-quality and versatile software and hardware package as Arduino. The success story begins in 2005, when the two passionate IT people Massimo Banzi and David Cuartielles develop the first Arduino, in Italy, and immediately hit the bull's eye. Within three years, no less than 50,000 copies of the compact single-board computer were sold, after which dozens of other Arduino models followed and also became top sellers. In the meantime, the platform has long since achieved cult status among hobby tinkerers.
One important reason for its success is that the hardware modules are extremely versatile and flexible thanks to their numerous inputs and outputs. With the help of Serial Read, the Arduino effortlessly reads out all desired commands. Whether you want to control displays or motors, or take measurements using sensors: Arduino always has the ideal hardware component in stock.
By the way, contrary to what is often claimed, Arduino boards cannot be used as a replacement for the Raspberry Pi, because unlike the mini-computer with the raspberry, the Arduino is dependent on an external computer. However, depending on the project, an Arduino board can be used in combination with a Raspberry Pi.
Arduino S.r.l.
Via Andrea Appiani 25
IT 20900 Monza MB
https://www.arduino.cc
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Only use the board in a well-ventilated environment to avoid overheating.
- Avoid direct contact with water or other liquids, as this can cause short circuits.
- Ensure that the voltage supply corresponds to the specifications of the board to prevent damage.
- Keep the board away from static discharges, e.g. by using an antistatic pad.
- Do not tamper with any components during operation to avoid injury or electrical damage.
- Only use official and compatible accessories to ensure safe operation.
- Defective boards or components must not be disposed of with household waste.
- Recycle the product in accordance with local laws for electrical and electronic waste.
- Remove all batteries or connected memory modules before disposal.
- Keep the product out of the reach of children to prevent injury or damage.
Login