Customers also bought
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Content: 5 Stück (€0.50 / 1 Stück)
Available · 30 piece · 1-3 days
Available · 6 piece · 1-3 days
Available · 12 piece · 1-3 days
Available · 100+ piece · 1-3 days
Content: 10 Stück (€0.39 / 1 Stück)
Available · 7 piece · 1-3 days
Available · 28 piece · 1-3 days
Available · 51 piece · 1-3 days
Available · 8 piece · 1-3 days
Available · 13 piece · 1-3 days
Available · 16 piece · 1-3 days
Description
Product information "Adafruit NeoPixel Stick - 8 x 5050 RGBW LEDs - Cold white - ~6000K"
This is the Cool White RGBW version. We also have this stick in warm white, natural white, and good old RGB!
The NeoPixel is 'split', one half is RGB as you know and love it, the other half is a white LED with yellow phosphor. Unlit, it resembles an egg yolk. When lit, these are insanely bright and can be controlled with 8-bit PWM per channel (8 x 4 channels=32-bit colour in total). Great for adding lots of colourful + white dots to your project!
We've packed 8 of the tiny 5050 (5mm x 5mm) smart RGBW LEDs onto a PCB with mounting holes and a chainable design. Use just one microcontroller pin, to drive as many as you can daisy chain together! Each LED is addressable as the driver chip is inside the LED. Each has a ~18mA constant current driver, so the colour is very consistent even if the voltage varies, and no external choke resistors are required, making the design slim. Power the whole thing with 5VDC (4-7V works) and you're ready to rock.
NeoPixel LEDs use the 800 KHz protocol, so special timing is required. For NeoPixels, the PWM rate is ~400 Hz, which works well but is noticeable when the LED moves.
The LEDs are 'cascadable' by connecting the output of one stick to the input of another . There is a single data line with a very timing specific protocol. As the protocol is very timing sensitive, it requires a real-time microcontroller such as a AVR, Arduino, PIC, Mbed etc. It cannot be used with a Linux-based microcomputer or a interpreted microcontroller such as the netduino or Basic Stamp.
Our beautifully written Neopixel library for Arduino supports these pixels! Since it requires hand-tuned placement, it's for AVR cores only, but others may have ported this chip driver code. An 8MHz or faster processor is required.
We have a tutorial, that shows the wiring, power consumption calculations, sample code for use, etc. for NeoPixel. Please note that you will need a NeoPixel library with RGBW support, which is not always available. If you try to control this with a simple 'RGB' NeoPixel library you will get very strange results. Our Adafruit NeoPixel library does support RGBW, but if you use anything else you should be aware that this may require hacking. Supplied as a single stick with 8 individually addressable RGBW LEDs assembled and tested.
Our detailed NeoPixel Uberguide contains everything you need to use NeoPixels in any shape and size. Includes ready-to-use library and sample code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)
Properties
| Zolltarifnummer: | 85444290 |
|---|---|
| Brand: | Adafruit |
| Country of Origin: | China |
| EAN: | 4060137025082 |
| Gross Weight (kg): | 0.004 |
| Manufacturer ID: | 2869 |
| Product ID: | ADA2869 |
Manufacturer
Adafruit
Adafruit: The expert for open source hardware
For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.
Light comes into the dark with Adafruit NeoPixel
One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.
Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.
With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.
Adafruit Feather Boards: Powerful hardware in a compact format
With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.
The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.
Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.
With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.
Adafruit: What's behind the brand
As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.
Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!
Manufacturer and safety information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Avoid direct contact with power lines during operation.
- Ensure that the operating voltage corresponds to the specifications of the strip to avoid overheating or damage.
- Never connect the components with the wrong polarity (e.g. swapping +5V, GND or data lines).
- Operation outside the specified voltage or with the wrong controller can cause damage.
- Avoid short circuits, especially due to exposed solder joints or uninsulated cables.
- Use a suitable cooling option for long strips to prevent heat build-up.
- Keep the strip away from water or damp environments, unless the protection class of the product permits this.
- Dispose of the Stripe in accordance with the local regulations for electronic components (WEEE Directive).
- Do not dispose of in normal household waste as it contains electronic components.
- If the product is defective or damaged, recycle it properly and do not tamper with or repair it without specialist knowledge.
Reviews 1
Login
1 review
13 November 2021 00:00
-
-
Ähnliche Artikel
Currently not available
Available · 18 piece · 1-3 days
Available · 5 piece · 1-3 days