Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

Bewerten

Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black

Name: Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black
Brand: Adafruit
SKU: ADA4205
Price: 2.15 EUR
Availability: LimitedAvailability

Produktnummer: ADA4205

€2.15

Jetzt Bestellen und
2 Berrys sichern

Preise inkl. MwSt. zzgl. Versandkosten

Sofort verfügbar · 14 Stück · 1-3 days

Menge prüfen

Sofort verfügbar

14 Stück : 1-3 days

99% positive Bewertung

Kostenloser Versand ab 79€*

Support

Wird oft zusammengekauft

Produktinformationen "Adafruit multi-stroke wheel, universal, 65mm, TT / LEGO and N20 compatible, black"

Black multi-stroke wheel for TT / Lego or N20 motor - 65mm diameter
This multi-stroke wheel is solid, a little chunky, but it won't make your robot unwieldy. It even comes in Adafruit black! Each order includes one wheel and two different sized hubs to allow for quick and easy connection. The hubs may be attached to the wheel with some plastic burrs, so you should be able to cut them off with diagonal pliers or twist them out. The real secret of this wheel is that it can be used with a wide range of motors! Compatible with TT motors, 'N20' DC geared motors and LEGO cross pieces. This really is a universal wheel for any purpose.

Features at a glance

Solid and slightly chunky without making the robot unwieldy
Quick and easy connection thanks to two different sized hubs
Universal compatibility with TT motors, 'N20' DC geared motors and LEGO crosspieces

Technical data

TT motor/LEGO stroke: 5.4 x 3.5mm
DC/N20 geared motor stroke: 2.8mm diameter

Other data

Colour: Adafruit black
Diameter: 65mm

Scope of delivery

1x multi-stroke wheel (black)
2x hubs of different sizes

Notes

Diagonal pliers recommended for removing the plastic burr

Zolltarifnummer:	85011060
Brand:	Adafruit
Country of Origin:	China
Gross Weight (kg):	0.02
Manufacturer ID:	4205
Product ID:	ADA4205

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com

WEEE number: 20453810

Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions

Read the operating instructions in full before using the product.
Always disconnect the power supply from the power source during installation and maintenance.
Protect electronic parts from moisture, dust and static electricity.
Only use compatible components and accessories.
Keep children away from the product as small parts could be swallowed.
Avoid sources of heat and direct sunlight.
Replace defective or damaged parts immediately to avoid malfunctions.
Do not modify robot parts yourself, as this can lead to safety risks.
Only dispose of lithium-ion batteries in designated containers and protect them from short circuits.
Dispose of electronic components in accordance with the applicable environmental regulations.
Properly recycle old or unused parts and dispose of them in the waste electrical and electronic equipment system.

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Bewertungen nur in der aktuellen Sprache anzeigen.

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Similar Items

Adafruit Mecanum wheels, 48mm, LEGO & TT motor compatible, omnidirectional, improved grip

48mm Mecanum Wheels for Robots - Compatible with LEGO These omnidirectional wheels allow a four-wheeled robot to move in any direction. They can be used with LEGO-compatible crossbars or low-cost TT motors and have rubber wheels for excellent grip. Features at a glance Omnidirectional movement: Allows movement in any direction thanks to the unique design. LEGO compatibility: Easy integration into LEGO projects thanks to compatible inserts. Improved grip: Nine rubber beads per wheel for optimum grip when moving sideways. Technical data Wheel diameter: 48mm Wheel width: 25mm Insert length of the hub: 7.5mm Other data Left (L) and right (R) labelling on the hub for correct mounting Scope of delivery1x left Mecanum wheel1x right Mecanum wheel

€9.85

Sofort verfügbar · 22 Stück · 1-3 days

Adafruit Mecanum wheels, 48mm, LEGO & TT motor compatible, omnidirectional, improved grip

ADA4990

€9.85

Sofort verfügbar · 22 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit TT/DC motor wheel, 59.8mm diameter, 11.7g, for TT geared motors

TT DC motorbike: A solid but thin solution for your projects Plastic geared motors (also known as 'TT' motors) offer a simple and inexpensive way to get your projects moving. However, there are not many suitable wheels for TT motors. This TT DC motor wheel is solid, yet thin, so it won't make your robot bulky. Each order includes a wheel, a silicone tyre and a small Phillips screw to make the connection quick and easy. Although it looks exactly like our wheel for continuously rotating servos, this wheel is for use with 'TT' geared motors only! Features at a glance Solid but thin construction prevents clunky robots. Adafruit black colour for stylish projects. Quick and easy assembly thanks to included screw. Technical data Diameter without rubber tyres: 55.9mm Diameter with rubber tyres: 59.8mm Weight with rubber tyre: 11.7g Screw length: 8.6mm Compatibility Only suitable for 'TT' geared motors. Other data Enables the construction of slim and efficient robot projects. Scope of delivery 1 x TT DC motorbike 1 x silicone tyre 1 x Phillips screw

€2.75

Sofort verfügbar · 6 Stück · 1-3 days

Adafruit TT/DC motor wheel, 59.8mm diameter, 11.7g, for TT geared motors

ADA3757

€2.75

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Kunden kauften auch

Raspberry Pi 3 Model A+

The Raspberry Pi 3 Model A+ is the latest product in the Raspberry Pi 3 series. Like the Raspberry Pi 3 Model B+, it has a 64-bit quad-core processor with 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN and Bluetooth 4.2/BLE. The Raspberry Pi 3 Model A+ has the same mechanical size as the Raspberry Pi 1 Model A+. Technical data Processor Broadcom BCM2837B0 Chipset 64 bit Quad Core ARM Cortex-A53 @ 1.4 GHz Memory 512 MB LPDDR2 SDRAM Connectivity 2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac Wireless LAN Bluetooth 4.2 BLE 1x USB 2.0 port Access 40 pin GPIO header Picture & sound 1x HDMI type A connection MIPI DSI display port MIPI CSI camera port Combined 3.5mm 4-pin jack socket for analogue audio and composite video Multimedia H.264, MPEG-4 decode (1080p30) H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics SD card support Micro SD format for loading the operating system and as data storage Power supply 5V/2.5A DC via micro USB type B socket 5V DC via GPIO header Environment Operating temperature: 0-50° C Dimensions: 65 x 56 x 8.5 mm 65 x 56 x 8.5 mm Drill hole diameter: 2.75mm Note: Please note that the Raspberry Pi 3 Model A+ is not compatible with images prior to 11 October 2018!

€26.90

Sofort verfügbar · 24 Stück · 1-3 days

Raspberry Pi 3 Model A+

RPI3-AP

€26.90

Sofort verfügbar · 24 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery clip for 9V blocks, I-shape, plastic housing

Goobay 1x 9 V block battery cliploose cable ends, water-repellentThe Goobay 9 V battery connector is water-repellent and made of durable material, which guarantees a long service life for the battery clip.The push-button connection can be connected to a 9 V block battery or a battery holder.The battery clip is ideal for connecting LEDs to a 9 V block.The battery connection cable has loose cable ends and an I-shape.The positive pole of the battery connection is labelled red.Technical dataConnection, type: loose cable endsSpecial feature: water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 14.5 mmColour: blackLength: 28 mmsuitable battery size: 9 V blocksuitable IEC battery types: 6F22, 6HR61, 6LR61/6LP3146

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Battery clip for 9V blocks, I-shape, plastic housing

12483

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Micro push-button 12mm round, PCB mounting, NO contact

Micro pushbutton for PCB mounting - also ideal for use on breadboards. Technical data Switch type Micro pushbutton Number of latching switching positions 1-digit Contact configuration SPST-NO Contact rating DC (with resistive load) 0.01 A / 35 VDC Mounting Through-hole mounting Switching force 1.2N Housing dimensions Ø12mm Knob height (PCB-measured) 14.3mm Switching mode OFF-(ON) Button shape round Output grid 5x5mm Operating temperature -20...60°C Electrical service life 100.000 cycles Outputs PCB mounting, straight Max. contact resistance Contact resistance 30mΩ Min. insulation resistance 100MΩ

€0.60

Sofort verfügbar · 100+ Stück · 1-3 days

Micro push-button 12mm round, PCB mounting, NO contact

MDT254-B

€0.60

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

IR line tracking sensor with digital output

The sensor recognises whether it is in front of a light-reflecting or light-absorbing surface, and can be used primarily for line tracking. Thanks to this sensor, a robot could be programmed to follow a painted track. The TCRT5000 reflective sensor emits an infrared beam and uses a photo sensor to measure how much of this beam is reflected back at it. It passes this on by illuminating an LED and as a digital output. If the sensor is on a black line (absorbing surface), the LED remains off and the digital signal is set to On. If it steps out of the line (reflecting surface), the LED lights up and the digital output is set to Off. The built-in potentiometer can be used to regulate how sensitively the KY-033 measures and thus distinguishes between the On and Off states. The sensor is easy to install thanks to the two drill holes in the circuit board. Technical features Operating voltage: 3.3-5V DC Operating current: 20mA Operating temperature: -10°C - +50°C Detection distance: 2-40cm Dimensions: 42 × 10.5 mm Pin assignment VCC - power supply OUT - signal (depending on IR measurement) GND - ground

€1.60

Sofort verfügbar · 2 Stück · 1-3 days

IR line tracking sensor with digital output

KY-033

€1.60

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery holder for 2x Mignon AA with 150mm connection cable and closed housing

Goobay 2x AA (Mignon) battery holderloose cable ends, switchable, water-repellentThe Goobay battery holder can be installed in or attached to a battery-operated device.Two AA batteries can be inserted into the water-repellent black plastic housing.The AA battery compartment holds the AA batteries securely and firmly in place and ensures a constant power supply.The AA battery holder is equipped with an on/off switch and loose cable ends.Technical dataConnection, type: loose cable endsSpecial feature: switchable, water-repellentOperating temperature from: -20 °COperating temperature up to: 50 °CWidth: 33 mmColour: blackColour version: BlackHeight: 18.5 mmLength: 68 mmsuitable battery size: AA (Mignon)suitable IEC battery types: FR6, HR6, LR6

€0.72

Sofort verfügbar · 100+ Stück · 1-3 days

Battery holder for 2x Mignon AA with 150mm connection cable and closed housing

12443

€0.72

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DHT11 Temperature / humidity sensor shield for D1 Mini

With this shield with DHT11 sensor, the D1 Mini can be expanded to include a measurement option for temperature and humidity.FeaturesMeasuring rangeHumidity: 20 - 90%Temperature: 0 - 60 °CToleranceHumidity: ± 5%Temperature: ± 2°CSampling rate: 1 Hz (every second)Delivery incl. 2 pin headersPins3.3V: 3.3V power supplyD4: Data pinGND: Ground

€2.70

Sofort verfügbar · 100+ Stück · 1-3 days

DHT11 Temperature / humidity sensor shield for D1 Mini

D1-T11S

€2.70

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Subminiature toggle switch, 2 pin, ON-OFF

Goobay subminiature toggle switch, 2 pin, ON-OFF, blue housing This compact Goobay subminiature toggle switch with 2 pins enables simple ON-OFF switching operations and is ideal for DIY projects and modelling. With a maximum load capacity of 3A/125V and a robust metal lever, it offers reliable performance in a small format. Features at a glance Compact dimensions with a width of 5mm, height of 7mm and length of 8mm. Simple operation with ON-OFF functionality, suitable for a wide range of applications. Metal lever for long-lasting reliability and precise control. Technical specifications Switch type: Subminiature toggle switch Number of pins: 2 Maximum load capacity: 3A / 125V Switch positions: ON-OFF Mounting: with solder lugs Colour: Blue Lever of the switch is made of metal Dimensions of the switch: Width: 5mm Height: 7mm Length: 8mm Scope of delivery 1 x Goobay subminiature toggle switch, 2 pin, ON-OFF

€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

Subminiature toggle switch, 2 pin, ON-OFF

10013

€0.55

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery holder for 3x Mignon AA with push-button connection

Battery holder, 3x Mignon AAwith push-button connectionBattery holder suitable for cells of type: 3x Mignon (AA)Dimensions: 57.8 x 16.6 x 48.2 mmConnection: with push-button connectionRoHS-compliant

€0.49

Sofort verfügbar · 89 Stück · 1-3 days

40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

Jumper/Dupont cable set - Versatile connection for electronics projects The Jumper/Dupont cable set is the ideal solution for anyone looking for a reliable and flexible connection option for their electronics projects. Consisting of three different cable types - female-female, male-male and female-male - this set offers not only adaptability through the 40 separable wires of each cable, but also the precision that modern microcontroller projects require. With a standardised 2.54 mm pin spacing and high-quality AWG 28 copper inner conductors, this cable set enables efficient signal transmission. It is perfect for use with Raspberry Pi, Arduino and other microcontrollers to connect them to breadboards, sensors and modules, among other things. Features at a glance Compatibility: Ideal for Raspberry Pi, Arduino and other microcontrollers. Various cable types: Includes female-female, male-male, and female-male cables. Flexibility: Each of the 40 individual wires of the cable can be separated, allowing individual customisation. Technical data 3 cable types included: female-female, male-male, female-male Each cable consists of 40 cores Cores can be used separately Pin spacing: 2.54 mm (pitch) Inner conductor: AWG 28 copper Length: 20cm Scope of delivery 3x Jumper / Dupont cable (20cm): 1x female-female 1x male-male 1x female-male

€4.90

Sofort verfügbar · 100+ Stück · 1-3 days

40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

DUPK-SET-20

€4.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery holder for 4x Mignon AA with push-button connection

Battery holder, 4x Mignon AAwith push-button connectionBattery holder suitable for cells of the type: 4x Mignon (AA)Dimensions: 62 x 16 x 56.5 mmConnection: with push-button connection

€0.50

Sofort verfügbar · 37 Stück · 1-3 days

Battery holder for 4x Mignon AA with push-button connection

Battery holder, 4x Mignon AAwith push-button connectionBattery holder suitable for cells of the type: 4x Mignon (AA)Dimensions: 62 x 16 x 56.5 mmConnection: with push-button connection

11448

€0.50

Sofort verfügbar · 37 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

BMP280 Breakout Board, 2in1 sensor for temperature and air pressure

The Bosch BMP280 is a 2 in 1 environmental sensor and combines the measurement of temperature and air pressure. It has a digital I2C and SPI interface. Technical data: General: Operating voltage: 1.71 - 3.6V Dimensions: approx. 15.3 x 11.5 x 2.5 mm Delivery incl. pin header Features BMP280: Air pressure Pressure range 300 ... 1100 hPa (equiv. to +9000...-500 m above/below sea level) Relative accuracy ±0.12 hPa, equiv. to ±1 m (950 ... 1050hPa @25°C) Absolute accuracy typ. ±1 hPa (950 ...1050 hPa, 0 ...+40 °C) Operating temperature Operating range Operational -40°C - +85°C Full accuracy 0°C - +65°C

€1.60

Sofort verfügbar · 100+ Stück · 1-3 days

BMP280 Breakout Board, 2in1 sensor for temperature and air pressure

GY-BMP280

€1.60

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Desoldering pump with high suction power & Teflon tip

Desoldering pump, light metal housing with Teflon tipSoldering pump with high suction power for removing old solderHigh-quality desoldering pump made of light metal for removing/suctioning excess solder, solder residue, flux, soft solder and soldering agentPump tip made of antistatic Teflon for easy contact with the soldering ironPerfect and clean soldering surfaces thanks to optimum removal of old solder

€2.10

Sofort verfügbar · 35 Stück · 1-3 days

Desoldering pump with high suction power & Teflon tip

51200

€2.10

Sofort verfügbar · 35 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Mehr von Adafruit

Adafruit DVI Sock, für Pico, HDMI-Displays, nur Grafiken, nutzt RP2040 PIO-System und Overclocking

€3.25

Artikel aktuell nicht lieferbar

Details

Adafruit DVI Sock, für Pico, HDMI-Displays, nur Grafiken, nutzt RP2040 PIO-System und Overclocking

Adafruit DVI Sock für Pico - funktioniert mit HDMI Displays Mit dem Adafruit DVI Sock können Bilder und Grafiken direkt von deinem Pico oder Pico W auf einem HDMI-Monitor oder Fernseher angezeigt werden. Dieser DVI Sock mit digitalem Videoausgang (DVI) funktioniert mit jedem HDMI-Monitor oder Display. Bitte beachte, dass er keine Audioübertragung unterstützt, nur Grafiken! Die kleine Breakout-Platine wurde nach dem Vorbild von Wren6991's Pico DVI Sock entworfen und nutzt das Overclocking und das PIO-System des RP2040, um kostengünstige Mikrocontroller mit beeindruckender Videoausgabe zu ermöglichen. Ideal für Demos oder zum Experimentieren mit der digitalen Videoerzeugung. Merkmale im Überblick Kompakte Breakout-Platine zur Ausgabe von Bildern und Grafiken auf HDMI-Displays Unterstützt keine Audioübertragung, nur Grafiken Verwendet RP2040's PIO-System und Overclocking für beeindruckende Videoausgabe Einfache Verbindung zu den unteren Pins Ihres Pico-Boards oder direktes Löten Kompatibilität Funktioniert mit Raspberry Pi Pico und Pico W Technische Daten Produktabmessungen: 31,0 mm x 22,8 mm x 8,0 mm Produktgewicht: 4,1 g Lieferumfang 1x Adafruit DVI Sock für Pico LinkWren6991's Pico DVI Sockcool demos

ADA5957

€3.25

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit TT/DC motor wheel, 59.8mm diameter, 11.7g, for TT geared motors

€2.75

Sofort verfügbar · 6 Stück · 1-3 days

Adafruit TT/DC motor wheel, 59.8mm diameter, 11.7g, for TT geared motors

ADA3757

€2.75

Sofort verfügbar · 6 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit USB Host FeatherWing, MAX3421E, supports TinyUSB, 1A Booster, SPI & IRQ, 5V

€16.45

Sofort verfügbar · 1 Stück · 1-3 days

Adafruit USB Host FeatherWing, MAX3421E, supports TinyUSB, 1A Booster, SPI & IRQ, 5V

Adafruit USB Host FeatherWing with MAX3421EThe Adafruit USB Host FeatherWing allows easy integration of USB host functionality into microcontroller projects, supported by the TinyUSB library in Arduino for common development chips such as RP2040, ESP32-S2/S3 and nRF52840. It utilises the MAX3421E chip via SPI and an IRQ pin to communicate with USB devices, although the speed does not reach the fastest USB standards due to the SPI limitation. This module is ideal for basic HID interactions and data exchange with mass storage devices. An integrated 5V 1A booster with 500mA fuse ensures a reliable power supply, and it comes prepared with all the necessary headers to plug directly into a Feather mainboard. Developers must ensure that suitable drivers are available for the MAX3421E, especially if they go beyond the standard USB device classes. Features at a glance MAX3421E chip: Proven USB host chip that utilises SPI and an IRQ pin for data transfer. 5V 1A Booster: Provides clean 5V from USB or battery power source with 500mA fuse. Compatibility: Supports TinyUSB in the Arduino library for RP2040, ESP32-S2/S3, nRF52840, SAMD21/51 chips. Technical data USB host chip: MAX3421E Interface: SPI and IRQ pin Booster: 5V 1A with 500mA fuse Compatibility: TinyUSB Arduino library, AVR support, nRF52, ESP32 Dimensions: 52.0mm x 22.8mm x 8.8mm Other data Requires USB drivers for specific devices Supplied as a fully assembled wing with headers Scope of delivery 1x Adafruit USB Host FeatherWing 1x Header for soldering Links Adafruit TinyUSB Arduino USB Host Shield 2.0

ADA5858

€16.45

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

32x32 RGB LED matrix panel - 5mm grid

€38.45

Sofort verfügbar · 1 Stück · 1-3 days

32x32 RGB LED matrix panel - 5mm grid

Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are usually used to make video walls, here in New York we see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool, so we picked up a few boxes of them from a factory. They are very similar to our 6mm Grid 32x32 RGB LED Matrix Panel, but the LEDs on this panel are also a little closer together (a 5mm grid), so you don't have to stand as far away to see them. They are made to look good indoors, even with a wide angle (160 degrees) and also look good in ambient light. These matrices have 1024 bright RGB LEDs arranged in a 32x32 grid on the front. On the back is a board with two IDC connectors (one input, one output: theoretically you can daisy chain them together) and 12 16-bit latches that allow the display to be driven at a 1:16 sampling rate. These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. Comes with: A single 32x32 RGB panel, One IDC cable One power cable Note that these displays are designed to be driven by FPGAs or other high speed processors: They have no built-in PWM control of any kind. Instead, you will need to keep redrawing the screen to control the whole thing "manually" with PWM. This display works best with a high-speed, high-RAM microcontroller like a SAMD21, SAMD51, ESP32, etc. The good news is that the display is pre-white balanced with nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white. Of course, we wouldn't leave you with a datasheet and a "good luck!". We have full schematics and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll be making your colour pop within an hour! You will need 13 digital pins and about 1600 bytes of RAM to buffer the 12-bit colour image. You can't use this size of panel with an Arduino UNO (ATmega328) or ATmega32u4 - you need a chip with more RAM! These displays are technically modulatable - connect one output to the next input - as long as you have the RAM to handle it Note: To use a MatrixPortal with this matrix, you will need a pack of stacking headers to lift the MatrixPortal over the frame of the matrix. Plug two of the 8-pin headers into the 8x8 box header of the matrix before placing the MatrixPortal.

ADA2026

€38.45

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

4-channel I2C-compatible bi-directional logic level converter

€4.35

Artikel aktuell nicht lieferbar

Details

4-channel I2C-compatible bi-directional logic level converter

Since the Arduino (and Basic Stamp) are 5V devices and most modern sensors, displays, flash cards and modes are only 3.3V, many manufacturers are finding that they need to do level shifting/conversion to protect the 3.3V device from 5V. Many level shifters both don't like working with I2C, which uses a weird pull-up system to transfer data back and forth. This level shifter board combines the ease of use of the bidirectional TXB0108 with an I2C-compatible FET design that follows NXP's app note. This breakout has 4 BSS138 FETs with 10K pullups. It works up to 1.8V on the low side and up to 10V on the high side. The 10K makes the interface slightly slower than using a TXB0108 or 74LVC245, so we recommend using these if you need fast transmission. While we designed it for use with I2C, it works just as well for TTL Serial, slow <2MHz SPI, and any other digital interface both uni- and bi-directional. Included is a fully assembled and tested board with 4 full bidirectional converter lines and 2 pieces of 6-pin headers that you can solder to plug into a breadboard or perfboard.

ADA757

€4.35

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

5" eTape liquid level sensor

€43.95 €49.00 (10.31% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

5" eTape liquid level sensor

The eTape liquid level sensor is a solid-state sensor with a resistance output that changes with the liquid level. It eliminates the need for bulky mechanical floats and can be easily connected to electronic control systems. The envelope of the eTape sensor is compressed by the hydrostatic pressure of the liquid in which it is immersed. This leads to a change in resistance that corresponds to the distance between the top of the sensor and the surface of the liquid. The output resistance of the sensor is inversely proportional to the height of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance. This is a very unique sensor. We have yet to see anything else that is affordable and accurate for measuring liquid levels. This sensor seems like a handy addition to a hydroponic, aquarium, fountain or pool controller, or perhaps for measuring a rain pipe. This particular sensor is the 5" version, and it includes a 4-pin connector and a 560Ω 5% resistor. The connector is such that you don't have to solder directly to the sensitive pins. Instead, you simply solder to the connector and plug it onto the sensor. Since the sensor has a resistor, it is easy to read it with an ADC pin of the microcontroller. On the Tutorials tab you will find a quick start guide! Please note: This product only comes with the 5" bare tape liquid level sensor.

ADA3827

€43.95 €49.00 (10.31% gespart)

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

64x32 RGB LED matrix - 2.5mm grid

€43.95

Sofort verfügbar · 7 Stück · 1-3 days

64x32 RGB LED matrix - 2.5mm grid

Bring a bit of Times Square into your home with this cute 64 x 32 square RGB LED matrix panel. These panels are normally used for video walls. Here in New York, you see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool, so we picked up a few boxes of them from a factory. This version is the 2.5mm pitch 64x32 RGB LED matrix. Please note that you can't use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can display RGB matrices and has sufficient RAM. This matrix has 2048 bright RGB LEDs arranged on the front in a 64x32 grid. On the back is a board with two IDC connectors (one input, one output: theoretically you can daisy-chain them together) and 12 16-bit latches that allow the display to be driven at a 1:16 sampling rate. These displays are technically "daisy-chainable" - you can connect one output to the next input - but our Arduino example code doesn't support this (yet). It requires a high-speed processor and more RAM than the Arduino has! These panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply of up to 4A per panel. We recommend a 4A regulated 5V adapter and then connecting a 2.1mm jack. Please have a look at our tutorial for more details! Scope of delivery: A single 64x32 RGB panel, One IDC cable One pluggable power cable Please note that these displays are designed to be driven by FPGAs or other high-speed processors: They do not have any built-in PWM control. Instead, you have to keep redrawing the screen to control the whole thing "manually" with PWM. On a 16 MHz Arduino Mega, we managed to generate 12-bit colours (4096 colours) with 40% CPU usage, but this display would really shine if it were controlled by an FPGA, CPLD, Propeller, XMOS or other high-speed multicore controller. The good news is that the display is pre-white balanced with a nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white. Of course, we wouldn't leave you with a datasheet and a "good luck!". We have a full schematic and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll be making your colour pop within an hour! On an Arduino you need 16 digital pins and about 3200 bytes of RAM to buffer the 12-bit colour image.

ADA5036

€43.95

Sofort verfügbar · 7 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

64x32 RGB LED matrix - 4mm grid

€43.95

Sofort verfügbar · 5 Stück · 1-3 days

64x32 RGB LED matrix - 4mm grid

Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are usually used to make video walls, here in New York we see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 4mm grid 64x32 RGB LED matrix. Please note that you can't use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying RGB matrices and has plenty of RAM. This is similar to our 3mm grid 64x32 RGB LED matrix panel, but the LEDs on this panel are further apart (a 4mm grid) so you don't need to be really close to see it. It's designed to look good indoors, even with a wide viewing angle (160 degrees), and to look good in ambient light. If you're looking for a wider grid for a greater viewing distance, check out our 6mm grid 64x32 RGB LED matrix or our 5mm grid 64x32 RGB LED matrix. This matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back is a board with two IDC connectors (one input, one output: theoretically you can daisy chain these together) and 12 16-bit latches that allow the display to be driven at a 1:16 sample rate. These displays are technically "daisy chainable" - connect one output to the next input - but our Arduino example code does not (yet) support this. It requires a high-speed processor and more RAM than the Arduino has! These panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply of up to 4A per panel. Comes with: A single 64x32 RGB panel, One IDC cable One pluggable power cable Note that these displays are designed to be driven by FPGAs or other high-speed processors: They have no built-in PWM control of any kind. Instead, you have to keep redrawing the screen to control the whole thing "manually" with PWM. On a 16 MHz Arduino Mega, we've managed to generate 12-bit colours (4096 colours) with 40% CPU usage, but this display would really shine if it were controlled by an FPGA, CPLD, Propeller, XMOS or other high-speed multicore controller. The good news is that the display is pre-white-balanced with nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white. Of course, we wouldn't leave you with a datasheet and a "good luck!". We have a full schematic and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll be making your colour pop within the hour! On an Arduino, you will need 16 digital pins and about 3200 bytes of RAM to buffer the 12-bit colour image. Please note: The back of the matrix will be either green or black This product can be supplied with one or two power connectors There may be a short coupled data cable installed in the centre

ADA2278

€43.95

Sofort verfügbar · 5 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

64x32 RGB LED matrix - 5mm grid

€54.95

Artikel aktuell nicht lieferbar

Details

64x32 RGB LED matrix - 5mm grid

Bring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are usually used to make video walls, here in New York we see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 64x32 RGB LED matrix with 5mm spacing. Please note that you can't use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying RGB matrices and has plenty of RAM. This matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: theoretically you can daisy chain them together) and 12 16-bit latches that allow you to drive the display at a 1:16 sampling rate. These displays are basically modulatable - connect one output to the next input - but our Arduino example code does not (yet) support this. These panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply of up to 4A per panel. Comes with: A single 64x32 RGB panel, One IDC cable One pluggable power cable Note that these displays are designed to be driven by FPGAs or other high speed processors: They have no built-in PWM control whatsoever. Instead, you have to redraw the screen over and over again to control the whole thing "manually" with PWM. On a 16 MHz Arduino Mega, we managed to generate 12-bit colours (4096 colours) with 40% CPU usage, but this display would really shine if it was controlled by an FPGA, CPLD, Propeller, XMOS or other high-speed multicore controller. The good news is that the display is pre-white-balanced with nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white. Of course, we wouldn't leave you with a datasheet and a "Good luck!". We have full schematics and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll have your colour shining within the hour! On an Arduino, you will need 16 digital pins and about 3200 bytes of RAM to buffer the 12-bit colour image. Note: The back of the matrix will be either green or black This product can be supplied with one or two power connections There may be a short coupled data cable installed in the centre

ADA2277

€54.95

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

64x32 RGB LED matrix - 6mm grid

€71.45

Artikel aktuell nicht lieferbar

Details

64x32 RGB LED matrix - 6mm grid

Bring a little bit of Times Square into your home with this sweet 64x32 square RGB LED matrix panel. These panels are usually used to make video walls, here in New York we see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 6mm pitch 64x32 RGB LED matrix. Please note that you can't use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying RGB matrices and has plenty of RAM. This matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: theoretically you can daisy chain them together) and 12 16-bit latches that allow you to drive the display at a 1:16 sampling rate. These displays are basically modulatable - connect one output to the next input - but our Arduino example code does not (yet) support this. These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. Comes with: A single 64x32 RGB panel One IDC cable One pluggable power cable Note that these displays are designed to be driven by FPGAs or other high speed processors: They have no built-in PWM control of any kind. Instead, you have to keep redrawing the screen to control the whole thing "manually" with PWM. On a 16 MHz Arduino Mega, we've managed to generate 12-bit colours (4096 colours) with 40% CPU usage, but this display would really shine if it were controlled by an FPGA, CPLD, Propeller, XMOS or other high-speed multicore controller. The good news is that the display is pre-white-balanced with nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white. Of course, we wouldn't leave you with a datasheet and a "good luck!". We have a full schematic and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll be making your colour pop within an hour! On an Arduino, you will need 16 digital pins and about 3200 bytes of RAM to buffer the 12-bit colour image. Please note: The back of the matrix will be either green or black This product can be supplied with one or two power connectors There may be a short coupled data cable installed in the centre

ADA2276

€71.45

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

8" eTape level sensor

€43.95

Artikel aktuell nicht lieferbar

Details

8" eTape level sensor

The eTape level sensor is a solid-state sensor with a resistance output that varies with the liquid level. It eliminates the need for bulky mechanical floats and can be easily connected to electronic control systems. The envelope of the eTape sensor is compressed by the hydrostatic pressure of the liquid in which it is immersed. This leads to a change in resistance that corresponds to the distance from the top of the sensor to the surface of the liquid. The resistance output of the sensor is inversely proportional to the level of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance. This is a very unique sensor, we have not seen anything else that is affordable and accurate for measuring liquid levels. This sensor seems like a handy addition to a hydroponic, aquarium, fountain or pool controller, or perhaps for measuring a rain pipe. This sensor is the 8" model. We also supply a 4-pin connector and a 560 ohm resistor. The connector is such that you don't have to solder directly to the sensitive pins: instead, you simply solder to the connector and plug it onto the sensor. As the sensor is resistive, it is easy to read it with a microcontroller/Arduino ADC pin.

ADA463

€43.95

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

€32.95

Artikel aktuell nicht lieferbar

Details

Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

This powerful shield features the VS1053, an encoding/decoding (codec) chip, which can decode a variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM) . It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can also do all sorts of things with the audio, such as bass, treble and digitally adjust volume. All these functions are implemented in a lightweight SPI interface so that any Arduino can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into, which reads "classic" 31250Kbaud MIDI data from an Arduino pin and behaves like a synth/drum machine - there are dozens of inbuilt drum and sample effects! But the chip is a pain to solder and needs a lot of extras. That's why we've put together the best shield that works perfectly with any Arduino Uno, Leonardo or Mega. This version of the shield only has a line/headphone output, Features Equipped with the VS1053B codec chip - decodes Ogg Vorbis, MP3/MP2/MP1, MP4, AAC, WMA, FLAC, WAV/PCM, MIDI. Encodes Ogg or WAV/PCM Stereo audio output with appropriate audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers 7 additional GPIO's that can be written or read via the Arduino library to read buttons or LEDs MicroSD card socket, for any FAT16/FAT32 formatted SD card from 64Mb. Full 3.3/5V level shifting for SD and MP3 chipsets Works with Arduino Uno, Mega, or Leonardo Built-in MIDI synthesiser/drum machine with dozens of instruments Numerous optional breakouts for pins such as the card detect and microphone input Each order comes with a fully assembled and tested shield, a 0.1" male header and 2x3 female headers for ICSP connection. Some light soldering is required to attach the pin headers to the board for connection to the Arduino as well as the terminals for the speakers. Speakers, $1 headphones, SD card and Arduino not included! There is a detailed tutorial with lots of information about the VS1053 as well as instructions on how to use the Arduino library to play sound effects in less than 30 minutes

ADA1790

€32.95

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit "Music Maker" MP3 Shield for Arduino with 3W stereo amplifier

€38.45

Sofort verfügbar · 3 Stück · 1-3 days

Adafruit "Music Maker" MP3 Shield for Arduino with 3W stereo amplifier

Adafruit "Music Maker" MP3 Shield for Arduino with 3W Stereo Amplifier - A comprehensive audio interface for your projects The Adafruit "Music Maker" MP3 Shield transforms any Arduino into a fully equipped music machine. Equipped with the VS1053B codec chip, this shield can decode and play a variety of audio formats, including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC and WAV. In addition to playback, the shield is also capable of recording audio in formats such as PCM (WAV) and Ogg Vorbis. With the built-in 3W stereo amplifier, you can drive speakers directly, making the Shield particularly suitable for portable or battery-powered projects. Whether for interactive art installations, custom alarm systems or educational purposes - the "Music Maker" Shield offers a variety of ways to integrate audio into your Arduino projects. Features at a glance Versatile audio codecs: Supports formats such as MP3, AAC, Ogg Vorbis, and more. High-quality audio output: Direct connection to headphones, stereo systems or other speakers possible. Expandable functionality: Additional GPIOs for extensions such as buttons and LEDs. Technical data: Dimensions Dimensions: 69mm x 53mm x 2mm Weight: 14.7g Codec chip: VS1053B, decodes and encodes a variety of audio formats MicroSD card socket for FAT16/FAT32 formatted cards 3.3/5V level adjustment for SD and MP3 chipsets Compatible with Arduino Uno, Mega, Leonardo Other data MIDI synth/drum machine with numerous instruments built in Improvements in the analogue section for better audio quality since 20 August 2014 Scope of delivery 1x fully assembled and tested MP3 Shield 2x 2-pin connector blocks Pin headers and 2x3 female headers for ICSP connection Links toTutorial for the Adafruit Music Maker ShieldGitHub - Adafruit PenguinDownloads for the Adafruit Music Maker Shield

ADA1788

€38.45

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - Blue

€15.35

Sofort verfügbar · 8 Stück · 1-3 days

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - Blue

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Blue Elegantly display 012345678 or 9! Marvel at the display of the entire alphabet. This is the blue Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in green, red, white, yellow-green and yellow. This is a bright alphanumeric display that shows letters and numbers in a beautiful colour. It is super bright and suitable for viewing distances of up to 7 metres. Each of the digit groups has 14 segments on a dark background. The kit includes two alphanumeric displays and a FeatherWing driver board so you can create a clock or a four-letter word. Works with all Feathers! 14-segment matrices like this are 'multiplexed' - to drive all fourteen segment LEDs, you need 18 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix, but it requires a lot of wiring and takes up a lot of space. Wouldn't it be great to be able to control a matrix without a lot of wiring? That's where these Alphanumeric LED Matrix FeatherWings come in, they make it really easy to add a 4 digit alphanumeric display with decimal points. The LEDs themselves are not connected to the Feather. Instead, a matrix driver chip (HT16K33) does the multiplexing for you. The Feather simply sends i2c commands to the chip to tell it which LEDs to light. This takes a lot of work and pin requirements off the Feather. Since it only uses I2C for control, it works with any Feather and can share the I2C pins for other sensors or indicators. Features at a glance Bright alphanumeric display 14 segments per digit on dark background Multiplexing with HT16K33 driver chip Use of only I2C pins Compatible with all Feathers Technical data Uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing dimensions: 51mm x 23mm x 4.2mm / 2.0" x 0.9" x 0.165" Backpack weight: 4.6g Dual Alphanumeric Display Dimensions: 21mm x 25mm x 7mm / 0.8" x 1" x 0.3" Dual Alphanumeric Display Height with pins: 14mm / 0.6" Dual Alphanumeric Display Weight: 4.7g Other data Common Cathode LED display Scope of delivery 1x fully tested and assembled Adafruit 4-Digit 14-Segment Alphanumeric Display FeatherWing 0.54" ultra-bright dual alphanumeric blue display - pack of 2 Two 16-pin headers Link Instruction Manual

ADA3128

€15.35

Sofort verfügbar · 8 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - Red

€10.95

Sofort verfügbar · 18 Stück · 1-3 days

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - Red

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Red This is the red Adafruit 0.54" Quad Alphanumeric Display with FeatherWing Combo Pack! It displays letters and numbers in a beautiful colour. It is super bright and designed to be viewed from distances of up to 7 metres. Each of the number sets has 14 segments on a dark background. You get a set of two alphanumeric displays plus a Featherwing driver board to create a four-letter clock or word. 14-segment matrices like these are 'multiplexed' - to drive all 14-segment LEDs, you need 18 pins. There are driver chips like the MAX7219 that can control a matrix for you, but that requires a lot of wiring and space. These alphanumeric LED matrix FeatherWings make it easy to add a 4-digit alphanumeric display with decimal points. The matrix driver chip (HT16K33) handles the multiplexing. The Feather simply sends I2C commands to the chip to control which LEDs should light up. This takes a lot of work and pin requirements off the Feather's hands. Since it only uses I2C for control, it works with any Feather and can share the I2C pins for other sensors or displays.Features at a glanceSuper bright, red alphanumeric display14-segment display with 4 digitsSimple I2C interfaceTechnical data12C 7-bit address between 0x70-0x77, selectable with jumpersFeatherWing dimensions: 51mm x 23mm x 4.2mmFeatherWing weight: 4.6gDual Alphanumeric Display Dimensions: 21mm x 25mm x 7mmHeight of the Dual Alphanumeric Display with pins: 14mmDual Alphanumeric Display Weight: 4.7gCommon Cathode LED DisplayOther dataCompatible with all Feather boardsDetailed instructions includedArduino & CircuitPython library availableScope of delivery1x Adafruit 4-digit 14-segment alphanumeric display FeatherWing2x 0.54" ultra-bright, double alphanumeric, red display2x 16-pin headers Link Instruction manual

ADA3130

€10.95

Sofort verfügbar · 18 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - White

€15.35

Sofort verfügbar · 14 Stück · 1-3 days

Adafruit 0.54" 4-way Alphanumeric FeatherWing Display - White

This is the white Adafruit 0.54" Alphanumeric Dual Display with FeatherWing Combo Pack! This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful hue. It's super bright and designed for viewing from distances up to 7 metres away. Each of the digit sets has 14 segments on a dark background, and we provide you with a set of two alphanumeric displays as well as a featherwing driver board so you can create a clock or word with four letters. Works with all feathers! 14-Segment matrices like this are 'multiplexed' - so to control all 14-segment LEDs, you need 18 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you, but it's a lot of wiring to set up, and they take up a lot of space. Wouldn't it be fantastic if you could control a matrix without tons of wiring? That's where these alphanumeric LED matrix FeatherWings come in. They make it really easy to add a 4-digit alphanumeric display with decimal points. The LEDs themselves are not connected to the Feather. Instead, a matrix driver chip (HT16K33) does the multiplexing for you. The Feather simply sends I2C commands to the chip to tell it which LEDs should light up, and it does it for you. This takes a lot of work and pin requests off the Feather's plate. Since it only uses I2C for control, it works with any Feather and can share I2C pins for other sensors or displays. The product kit comes with: One fully tested and assembled Adafruit 4-digit 14-segment alphanumeric display FeatherWing 0.54" Ultra bright dual alphanumeric white display - pack of 2 Two 16-pin headers In classic Adafruit style, we of course also have a detailed guide that shows you how to solder, wire and control the display . We've even written a very nice library for the backpacks in both Arduino & CircuitPython, so you can get started in less than half an hour to display letters or numbers on the 14-segment display. If you've been looking into matrix displays but have hesitated because of the complexity, this is the solution you've been looking for.

ADA3127

€15.35

Sofort verfügbar · 14 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.56" 4 digit 7-segment FeatherWing Display - Blue

€13.15

Artikel aktuell nicht lieferbar

Details

Adafruit 0.56" 4 digit 7-segment FeatherWing Display - Blue

This is the blue Adafruit 0.56" 4-digit 7-segment display with FeatherWing Combo Pack! 7-segment matrices like this are 'multiplexed' - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can drive a matrix for you, but that means a lot of wiring and takes up a lot of space. Wouldn't it be fantastic if you could control a matrix without tonnes of wiring? That's where these LED Matrix FeatherWings come in! The 7-segment FeatherWing makes it really easy to display a 4-digit numeric display with decimal points or a clock with a colon. The LEDs themselves are not connected to the Feather. Instead, a matrix driver chip (HT16K33) does the multiplexing for you. The Feather simply sends i2c commands to the chip to tell it which LEDs to light and it will do it for you. This takes a lot of work and pin requirements off the Feather. Since it only uses I2C for control, it works with any Feather and can share the I2C pins with other sensors or displays. What's included One fully tested and assembled Adafruit 4-digit 7-segment LED matrix display FeatherWing Ultra-bright 4-digit 0.56" blue 7-segment display Two sixteen-pin headers A little soldering is required to attach the matrix to the FeatherWing, but it's easy and only takes about 5 minutes! Check out the detailed tutorial for pinouts, assembly, Arduino and CircuitPython usage and more!

ADA3106

€13.15

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing - White

€12.05

Sofort verfügbar · 8 Stück · 1-3 days

Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing - White

This is the White Adafruit 0.56" 4-Digit 7-Segment Display with FeatherWing Combo Pack! 7-segment matrices like this are 'multiplexed' - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219, that can drive a matrix for you, but that means a lot of wiring and takes up a lot of space. Wouldn't it be fantastic if you could control a matrix without tonnes of wiring? That's where these LED Matrix FeatherWings come in! The 7-segment FeatherWing makes it really easy to display a 4-digit numeric display with decimal points or with colon a clock. The LEDs themselves are not connected to the Feather. Instead, a matrix driver chip (HT16K33) does the multiplexing for you. The Feather simply sends i2c commands to the chip, to tell it which LEDs to light, and it does it for you. This takes a lot of work and pin requirements off the Feather's plate. Since it only uses I2C for control, it works with any Feather and can share the I2C pins with other sensors or displays. What's included One fully tested and assembled Adafruit 4-digit 7-segment LED matrix display FeatherWing Ultra-bright 4-digit 0.56" white 7-segment display Two sixteen pin headers A little soldering is required to attach the matrix to the FeatherWing, but it's easy and only takes about 5 minutes! Check out the detailed tutorial for pinouts, assembly, Arduino and CircuitPython usage and more!

ADA3109

€12.05

Sofort verfügbar · 8 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Blue

€13.15

Artikel aktuell nicht lieferbar

Details

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Blue

What is better than a single LED? Lots of LEDs! A fun way to build a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Such matrices are "multiplexed" - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you, but there's a lot of wiring to put in and they take up a lot of space. Here at Adafruit we feel your pain! Wouldn't it be fantastic if you could control a matrix without tons of wires? That's where these adorable LED matrix backpacks come in. They work perfectly with Adafruit matrices and make adding a small bright display trivial. The matrices use a driver chip that does all the heavy lifting for you: they have a built-in clock so they multiplex the display. They use constant current drivers for ultra-bright, consistent colours(the images above are shot at the weakest setting so as not to overload our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address selection jumpers, so you can connect up to four mini 8x8s or eight 7-segments (or a combination, such as four mini 8x8s and four 7-segments, etc.) to a single I2C bus. The scope of delivery of the product kit includes: A fully tested and assembled LED backpack Ultra-bright 4-digit 0.56" blue seven-segment display 4-pin header A little soldering is required to attach the matrix to the backpack, but this is very easy and only takes about 5 minutes. Of course, in classic Adafruit fashion, we also have a detailed tutorial that shows you how to solder, wire and control the display. We've even written a very nice library for the backpacks, so you can be up and running in less than half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been toying with matrix displays but hesitated because of the complexity, this is the solution you've been looking for!

ADA881

€13.15

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Red

€10.95

Artikel aktuell nicht lieferbar

Details

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Red

What is better than a single LED? Lots of LEDs! A fun way to build a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Such matrices are "multiplexed" - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you, but there's a lot of wiring to put in and they take up a lot of space. Here at Adafruit we feel your pain! Wouldn't it be fantastic if you could control a matrix without tons of wires? That's where these adorable LED matrix backpacks come in. They work perfectly with Adafruit matrices and make adding a bright little display trivial. The matrices use a driver chip that does all the heavy lifting for you: they have a built-in clock so they multiplex the display. They use constant current drivers for ultra-bright, consistent colours(the images above are shot at the weakest setting so as not to overload our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address selection jumpers so you can connect up to four mini 8x8s or eight 7-segments (or a combination, such as four mini 8x8s and four 7-segments, etc.) to a single I2C bus. The product kit includes: A fully tested and assembled LED backpack Ultra-bright 4-digit 0.56" red seven-segment display 4-pin header A little soldering is required to attach the matrix to the backpack, but it's very easy and only takes about 5 minutes. Of course, in classic Adafruit fashion, we also have a detailed tutorial that shows you how to solder, wire and control the display. We've even written a very nice library for the backpacks, so you can be up and running in less than half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been toying with matrix displays but hesitated because of the complexity, this is the solution you've been looking for!

ADA878

€10.95

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - White

€12.05

Sofort verfügbar · 10 Stück · 1-3 days

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - White

What is better than a single LED? Lots of LEDs! A fun way to build a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Such matrices are "multiplexed" - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you, but there's a lot of wiring to put in and they take up a lot of space. Here at Adafruit we feel your pain! Wouldn't it be fantastic if you could control a matrix without tons of wires? That's where these adorable LED matrix backpacks come in. They work perfectly with Adafruit matrices and make adding a bright little display trivial. The matrices use a driver chip that does all the heavy lifting for you: they have a built-in clock so they multiplex the display. They use constant current drivers for ultra-bright, consistent colours(the images above are shot at the weakest setting so as not to overload our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address selection jumpers so you can connect up to four mini 8x8s or eight 7-segments (or a combination, such as four mini 8x8s and four 7-segments, etc.) to a single I2C bus. The product kit includes: A fully tested and assembled LED backpack Ultra-bright 4-digit 0.56" white seven-segment display 4-pin header A little soldering is required to attach the matrix to the backpack, but it's very easy and only takes about 5 minutes. Of course, in classic Adafruit fashion, we also have a detailed tutorial that shows you how to solder, wire and control the display. We've even written a very nice library for the backpacks, so you can be up and running in less than half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been toying with matrix displays but hesitated because of the complexity, this is the solution you've been looking for!

ADA1002

€12.05

Sofort verfügbar · 10 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Yellow

€10.95

Sofort verfügbar · 3 Stück · 1-3 days

Adafruit 0.56" 4-digit 7-segment display with I2C backpack - Yellow

What is better than a single LED? Lots of LEDs! A fun way to build a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Such matrices are "multiplexed" - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you, but there's a lot of wiring to put in and they take up a lot of space. Here at Adafruit we feel your pain! Wouldn't it be fantastic if you could control a matrix without tons of wires? That's where these adorable LED matrix backpacks come in. They work perfectly with Adafruit matrices and make adding a small bright display trivial. The matrices use a driver chip that does all the heavy lifting for you: they have a built-in clock so they multiplex the display. They use constant current drivers for ultra-bright, consistent colours(the images above are shot at the weakest setting so as not to overload our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address selection jumpers, so you can connect up to four mini 8x8s or eight 7-segments (or a combination, such as four mini 8x8s and four 7-segments, etc.) to a single I2C bus. The scope of delivery of the product kit includes: A fully tested and assembled LED backpack Ultra-bright 4-digit 0.56" yellow seven-segment display 4-pin header A little soldering is required to attach the matrix to the backpack, but this is very easy and only takes about 5 minutes. Of course, in classic Adafruit fashion, we also have a detailed tutorial that shows you how to solder, wire and control the display. We've even written a very nice library for the backpacks, so you can be up and running in less than half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been toying with matrix displays but hesitated because of the complexity, this is the solution you've been looking for!

ADA879

€10.95

Sofort verfügbar · 3 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.56" 4-digit 7-segment FeatherWing Display - Yellow

€10.95

Sofort verfügbar · 1 Stück · 1-3 days

Adafruit 0.56" 4-digit 7-segment FeatherWing Display - Yellow

This is the Yellow Adafruit 0.56" 4-Digit 7-Segment Display with FeatherWing Combo Pack! 7-segment matrices like this are 'multiplexed' - so to drive all 7-segment LEDs, you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219, that can drive a matrix for you, but that means a lot of wiring and takes up a lot of space. Wouldn't it be fantastic if you could control a matrix without tonnes of wiring? That's where these LED Matrix FeatherWings come in! The 7-segment FeatherWing makes it really easy to display a 4-digit numeric display with decimal points or with colon a clock. The LEDs themselves are not connected to the Feather. Instead, a matrix driver chip (HT16K33) does the multiplexing for you. The Feather simply sends i2c commands to the chip, to tell it which LEDs to light, and it does it for you. This takes a lot of work and pin requirements off the Feather's plate. Since it only uses I2C for control, it works with any Feather and can share the I2C pins with other sensors or displays. What's included One fully tested and assembled Adafruit 4-digit 7-segment LED matrix display FeatherWing Ultra-bright 4-digit 0.56" yellow 7-segment display Two sixteen-pin headers A little soldering is required to attach the matrix to the FeatherWing, but it's easy and only takes about 5 minutes! Check out the detailed tutorial for pinouts, assembly, Arduino and CircuitPython usage and more!

ADA3110

€10.95

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Red

€10.90

Sofort verfügbar · 37 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Red

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Red You'll chirp with delight when you see how easy it is to create your own 8x16 LED matrix display for each Feather. This kit combines two of our cute miniature LED matrices with a FeatherWing driver board. These little 8x8 matrices have everything a large LED matrix has, just in a handy size! Double them up for a total of 128 bright red LEDs. This is the red Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Combo Pack! We also have these combo packs in white, blue, green, red and yellow-green. Normally wiring 8x16 matrices requires a staggering 24 GPIO pins, which is way too many pins. That's where this 16x8 LED matrix backpack PCB comes in. It includes an HT16K33 I2C LED matrix driver that does all the multiplexing work for you and is controlled via the two I2C pins. It's easy to use, has a portable library that runs on any of our Feathers and switches any LED on or off. The 16x8 backpack is also ideal for creating running displays or small video displays. In our example, we've set it up to display small bitmap emoticons, but you can also display text that moves - like a sign in front of a miniature car dealership. Features at a glance HT16K33 I2C LED matrix driver Easy to use with portable library for feather boards Ideal for running displays or small video displays Technical specifications Board/chip uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing dimensions: 51mm x 23mm x 5mm / 2.0" x 0.9" x 0.2" FeatherWing weight: 6.3g Mini LED Matrix Display Dimensions: 20mm x 20mm x 6mm / 0.8" x 0.8" x 0.2" Mini LED Matrix Display height with pins: 13mm / 0.5" Mini LED Matrix Display Weight: 3g Scope of delivery 1x fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright square 8x8 red matrices 2 x 16-pin headers Link Tutorial

ADA3152

€10.90

Sofort verfügbar · 37 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green

€10.90

Sofort verfügbar · 28 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green You'll chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for each Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. Measuring 0.8" square, these little 8x8 matrices have everything a large LED matrix has, but in miniature! Double them up for a total of 128 bright yellow-green LEDs. Normally, wiring 8x16 matrices would require a staggering 24 GPIO pins, which is way too many pins. That's where this beautiful 16x8 LED matrix backpack board comes in. It includes an HT16K33 I2C LED matrix driver that does all the multiplexing work for you and is controlled via the two I2C pins. It is easy to use and has a portable library that runs on each Feather to switch each LED on and off. The 16x8 backpack is also great for making scrolling displays or small video displays. In our example, we've set it up to display small bitmap emoticons, but you can also display text that moves - similar to a sign in front of a miniature car dealership. Features at a glance Compact 8x16 LED matrix display Includes HT16K33 I2C LED matrix driver Easy operation with portable library Ideal for scrolling displays or video displays Supports Feather platform Technical specifications Uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing dimensions: 51mm x 23mm x 5mm / 2.0" x 0.9" x 0.2" FeatherWing weight: 6.3g Mini LED Matrix Display Dimensions: 20mm x 20mm x 6mm / 0.8" x 0.8" x 0.2" Mini LED Matrix Display height with pins: 13mm / 0.5" Mini LED Matrix Display Weight: 3g Other data Soldering required to attach the two matrices to the FeatherWing Scope of delivery One fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright yellow-green 8x8 matrices 2 x 16 pin header Link Tutorial

ADA3154

€10.90

Sofort verfügbar · 28 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

€14.90

Sofort verfügbar · 38 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue Enjoy the ease of creating your own 8x16 LED matrix display for each Feather. This kit combines two of our cute miniature LED matrices with a FeatherWing driver board. With 0.8" square, small 8x8 matrices, they offer everything a large LED matrix has, but in a smaller size. Double them up for a total of 128 bright blue LEDs. This blue Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Combo Pack is also available in white, green, red, yellow and yellow-green. Normally, wiring 8x16 matrices would require a staggering 24 GPIO pins, which is way too many pins. This is where the 16x8 LED matrix backpack PCB comes into play. It contains an HT16K33 I2C LED matrix driver that does all the multiplexing work and is controlled via the two I2C pins. It's easy to use, has a portable library that runs on each of our Feathers to turn each LED on and off. The 16x8 backpack is also great for making scrolling text displays or small video displays. In our example, we've set it up to display small bitmap emoticons, but you can also display text that moves - similar to a sign in front of a miniature car dealership. Features at a glance One fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-luminous 8x8 square blue matrices 2 x 16-pin headers Technical specifications The board/chip uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing dimensions: 51mm x 23mm x 5mm / 2.0" x 0.9" x 0.2" FeatherWing weight: 6.3g Mini LED Matrix Display Dimensions: 20mm x 20mm x 6mm / 0.8" x 0.8" x 0.2" Mini LED Matrix Display height with pins: 13mm / 0.5" Mini LED Matrix Display Weight: 3g Other data A bit of soldering is required to connect the two matrices to the FeatherWing, but it is very easy and only takes about 15 minutes. Check out our tutorial for assembly instructions, pinouts, CircuitPython and Arduino library code, schematics and more!(https://learn.adafruit.com/adafruit-8x16-led-matrix-featherwing/overview) Scope of delivery 1x fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-luminous square 8x8 blue matrices 2 x 16-pin headers Linkshttps://learn.adafruit.com/adafruit-8x16-led-matrix-featherwing/overview

ADA3150

€14.90

Sofort verfügbar · 38 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Green

€16.45

Sofort verfügbar · 8 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Green

You'll chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for each Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. Measuring 0.8" square, these little 8x8 matrices have everything a large LED matrix has, but in miniature! Double them up for 128 total bright white LEDs. Normally, wiring 8x16 matrices would require a staggering 24 GPIO pins, which is way too many pins. That's where this beautiful 16x8 LED matrix backpack board comes in. It contains an HT16K33 I2C LED matrix driver, which does all the multiplexing work for you and is controlled via the two I2C pins. It's easy to use and has a portable library that runs on each Feather to switch each LED on and off. The 16x8 backpack is also great for making scrolling displays or small video displays. In our example, we've set it up to display small bitmap emoticons, but you can also display text that moves - similar to a sign in front of a miniature car dealership. This kit is included: One fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright green 8x8 matrices 2 x 16 pin header A bit of soldering is required to attach the two matrices to the FeatherWing, but it's very easy and only takes about 15 minutes. Read our tutorial for assembly instructions, pinouts, CircuitPython and Arduino library code, schematics and more!

ADA3151

€16.45

Sofort verfügbar · 8 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White

€17.90

Sofort verfügbar · 23 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White You'll chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for each Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. Measuring 0.8" square, these little 8x8 matrices have everything a large LED matrix has, but in miniature! Double them up for 128 total bright white LEDs. Features at a glance HT16K33 I2C LED matrix driver for easy control 128 bright white LEDs in 16x8 array Portable library for Arduino and CircuitPython Scrolling displays and small video displays possible Technical specifications The board/chip uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing Dimensions: 51mm x 23mm x 5mm / 2.0" x 0.9" x 0.2" FeatherWing Weight: 6.3g Mini LED Matrix Display Dimensions: 20mm x 20mm x 6mm / 0.8" x 0.8" x 0.2" Mini LED Matrix Display Height w/ Pins: 13mm / 0.5" Mini LED Matrix Display Weight: 3g Other Data Kit contains fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright white 8x8 matrices 2 x 16 pin header Scope of delivery Fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright white 8x8 matrices 2 x 16-pin pin header Link toFurther information

ADA3149

€17.90

Sofort verfügbar · 23 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

€10.90

Sofort verfügbar · 35 Stück · 1-3 days

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow You'll chirp with delight when you see how easy it is to create your own 8x16 LED matrix display for each Feather. This kit combines two of our cute miniature LED matrices with a FeatherWing driver board. These little 8x8 matrices have everything a large LED matrix has, just in a handy size! Double them up for a total of 128 bright yellow LEDs. This is the yellow Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Combo Pack! We also have these combo packs in white, blue, green, red and yellow-green. Normally wiring 8x16 matrices requires a staggering 24 GPIO pins, which is way too many pins. That's where this 16x8 LED matrix backpack PCB comes in. It includes an HT16K33 I2C LED matrix driver that does all the multiplexing work for you and is controlled via the two I2C pins. It's easy to use, has a portable library that runs on any of our Feathers and switches any LED on or off. The 16x8 backpack is also ideal for creating running displays or small video displays. In our example, we've set it up to display small bitmap emoticons, but you can also display text that moves - like a sign in front of a miniature car dealership. Features at a glance HT16K33 I2C LED matrix driver Easy to use with portable library for feather boards Ideal for running displays or small video displays Technical specifications Board/chip uses 12C 7-bit address between 0x70-0x77, selectable with jumpers FeatherWing dimensions: 51mm x 23mm x 5mm / 2.0" x 0.9" x 0.2" FeatherWing weight: 6.3g Mini LED Matrix Display Dimensions: 20mm x 20mm x 6mm / 0.8" x 0.8" x 0.2" Mini LED Matrix Display height with pins: 13mm / 0.5" Mini LED Matrix Display Weight: 3g Scope of delivery 1x fully tested and assembled 16x8 0.8" LED FeatherWing 2 x ultra-bright square 8x8 yellow matrices 2 x 16-pin headers Link Tutorial

ADA3153

€10.90

Sofort verfügbar · 35 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 1.3" Colour TFT Display Bonnet for Raspberry Pi

€19.25

Sofort verfügbar · 2 Stück · 1-3 days

Adafruit 1.3" Colour TFT Display Bonnet for Raspberry Pi

If you want a compact colour display, with buttons and a joystick, we have what you are looking for. This Bonnet has 240x240 colour pixels in an IPS TFT display that is controlled via SPI. This display is super small, only about 1.3" diagonally, but since it is an IPS display it is very readable with high contrast and good visibility. With the TFT display in the centre we had some space on both sides, so we added a 5-way joystick and two push buttons . Great if you want to have a control interface for your project. On the bottom we have a Qwiic/STEMMA QT connector for I2C sensors and devices, so you can connect and play any of our STEMMA QT devices Using the display is very easy, we have a kernel driver and Python library for the ST7789 chipset. You can set it up as console output so you can have text and a user interface through Raspberry Pi OS or you can draw images, text, whatever you want using the Python imaging library. We also have Python code that you can use to read the joystick and buttons. Our tests showed ~15 FPS refresh rates, so you can make animations or simple videos. Comes fully pre-assembled and tested so all you need to do is plug it in and install the Python code ! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3, Pi 4 and Pi Zero. Instructions, software, downloads and more at Learning Guide!

ADA4506

€19.25

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit 1.54" 240x240 wide-angle TFT LCD display with MicroSD

€19.25

Artikel aktuell nicht lieferbar

Details

Adafruit 1.54" 240x240 wide-angle TFT LCD display with MicroSD

We've been looking for a display like this for a long time - it's only 1.5" diagonally, but has a high density of 220 ppi, 240x240 pixel display with full angle viewing. It looks similar to our 1.44" display with 128x128 pixels, but has 4x as many pixels and looks great at any angle. We've seen displays of this calibre in smartwatches and small electronic devices, but they always had a MIPI interface. Finally we have found one that is SPI and has a friendly display driver so it will work with any microcontroller or microcomputer! This neat little display breakout is the best way to add a small, colourful and very bright display to any project . As the display communicates via 4-wire SPI and has its own pixel addressable framebuffer, it can be used with any type of microcontroller. Even with a very small one with little memory and few available pins! The 1.54" display has 240x240 16-bit full colour pixels and is an IPS display, so the colour looks good up to 80 degrees off-axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well. Our breakout has the TFT display soldered on (it uses a sensitive flex-circuit connector) as well as an ultra-low dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. Since we had some space, we included a microSD card holder, so you can easily load full colour bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included. Of course, we wouldn't just leave you with a datasheet and a "Good luck!". - We have written a complete open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps, as well as sample code and a wiring tutorial. The code is written for Arduino, but can easily be ported to your favourite microcontroller! Please note! This display is originally intended for smartwatches and the like where there is a glass over the screen. Without something to gently hold the screen down, the backlight may eventually peel off the TFT. (It's not destructive, but it is unsightly) You can prevent this by ideally adding a plastic or glass cover/overlay. If you are using the device uncovered, try dabbing a touch of E6000 or similar craft glue on the thin side edges, or use a thin piece of tape to attach the front TFT to the backlight.

ADA3787

€19.25

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 1.54" Monochrome eInk / ePaper Display with SRAM

€27.45

Artikel aktuell nicht lieferbar

Details

Adafruit 1.54" Monochrome eInk / ePaper Display with SRAM

Simple e-paper finally comes to the microcontroller, with this breakout that makes it a snap to add an e-ink display. You've probably seen one of those newfangled 'e-readers' like the Kindle or Nook. They have giant electronic paper 'static' displays - this means that the image stays on the display even if the power is completely cut off. The image is also very high contrast and easy to read even in daylight. It really does look like printed paper! We've liked these displays for a long time, but the breakouts were never intended for use by manufacturers. Finally, we decided to make our own! The Breakout has a 1.54" monochrome (black and white) display. It has a higher resolution than our 1.54" three-colour display with 200x200 black pixels on a white background. The monochrome displays also take much less time to refresh, just a few seconds instead of 15 seconds! Using our CircuitPython or Arduino libraries, you can create a "frame buffer" with the pixels you want enabled and then output it to the display. Most simple breakouts leave it at that. But if you do the maths, 200 x 200 pixels=8 Kbytes. That doesn't fit into many microcontroller memories. And even if you have 32 Kbytes of RAM, why waste 8 Kbytes? So we've done you a favour and put a small SRAM chip on the back. This chip shares the SPI port that the eInk display uses, so you only need one extra pin. And, no more frame buffering! You can use the SRAM to create what you want to display and then transfer the data from the SRAM to the eInk when you're ready. The library we wrote does all the work for you, you can simply address it as if it were an Adafruit_GFX compatible display. For ultra-low power use, the onboard 3.3V regulator has the enable pin out so you can turn off the power to the SRAM and display. We've even added a MicroSD socket so you can store images, text files or whatever you want to display. Everything is 3 or 5V logic safe so you can use it with all microcontrollers. Comes assembled and tested, with some headers. You will need a soldering iron to attach the header for breadboarding or installation into your project.

ADA4196

€27.45

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 1.54" three-colour eInk / ePaper 200x200 display with SRAM

€21.95

Artikel aktuell nicht lieferbar

Details

Adafruit 1.54" three-colour eInk / ePaper 200x200 display with SRAM

Simple e-paper finally comes to the microcontroller, with this breakout that makes it a snap to add a three-colour e-ink display. You've probably seen one of those newfangled "e-readers" like the Kindle or Nook. They have giant electronic paper 'static' displays - this means that the image stays on the display even if the power is completely cut off. The image is also very high contrast and easy to read even in daylight. It really does look like printed paper! We've liked these displays for a long time, but the breakouts were never intended for use by manufacturers. Finally, we decided to make our own! We'll start with this small 1.54-inch three-colour display. It has 200x200 black and red colour pixels and a whitish background. Using our Arduino library, you can create a "frame buffer" with the pixels you want enabled and then output that to the display. Most simple breakouts leave it at that. But if you do the maths, 200 x 200 pixels x 2 colours=10 Kbytes. That doesn't fit into many microcontroller memories. And even if you have 32 Kbytes of RAM, why waste 10 Kbytes? So we've done you a favour and put a small SRAM chip on the back. This chip shares the SPI port that the eInk display uses, so you only need one extra pin. And, no more frame buffering! You can use the SRAM to create what you want to display and then transfer the data from the SRAM to the eInk when you're ready. The library we wrote does all the work for you, you can just address it as if it were an Adafruit_GFX compatible display. For ultra-low power use, the onboard 3.3V regulator has the enable pin out so you can turn off power to the SRAM, MicroSD and display. We even attached a MicroSD socket so you can store images, text files or whatever you want to display. Everything is 3 or 5V logic safe so you can use it with all microcontrollers. Comes assembled and tested, with some headers. You will need a soldering iron to attach the header for breadboarding or installing into your project.

ADA4868

€21.95

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 1.69 inch 280×240 rounded rectangular colour IPS TFT display

€19.25

Artikel aktuell nicht lieferbar

Details

Adafruit 1.69 inch 280×240 rounded rectangular colour IPS TFT display

Here is a new "round-rect" TFT display - it has a diagonal of 1.69" and a high pixel density of 220 ppi, 280x240 full colour pixels with IPS display at any angle. We've seen displays of this calibre in smartwatches and small electronic devices, but they always had a MIPI interface. Finally we have found one that is SPI and has a friendly display driver so it will work with any microcontroller or microcomputer! This neat little display breakout is the best way to add a small, colourful and very bright display to any project. Since the display communicates via 4-wire SPI and has its own pixel addressable framebuffer, it can be used with any type of microcontroller. Even with a very small microcontroller with little memory and few available pins! The 1.69" display has 280x240 16-bit full colour pixels and is an IPS display, so the colour looks good up to 80 degrees off-axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well. Note that we get the rounded corners by deleting pixels. The corner pixels are still addressed in RAM, they're just not displayed, so it's not like you need to do any special radial pixel mapping. Treat it like a rectangular display. Our breakout has the TFT display soldered on (it uses a sensitive flex-circuit connector) as well as a 3.3V regulator with ultra-low dropout and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. Since we had some space, we included a microSD card holder so you can easily load coloured bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included. Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps, as well as sample code and wiring instructions. The code is written for Arduino, but can easily be ported to your favourite microcontroller! This display breakout also features an 18-pin "EYE SPI" standard FPC connector with flip-top connection. You can use an 18-pin FPC cable with 0.5mm spacing to connect to all GPIO pins if you want to skip soldering.

ADA5206

€19.25

Artikel aktuell nicht lieferbar

Preise inkl. MwSt. zzgl. Versandkosten

Details

Adafruit 12 x Capacitive Touch Shield for Arduino, MPR121

€13.75

Sofort verfügbar · 1 Stück · 1-3 days

Adafruit 12 x Capacitive Touch Shield for Arduino, MPR121

This touch-enabled add-on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensors detect when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensors are used for things like touch-sensitive tablets and phones, as well as control panels for devices where you may have used them before. With this shield, you can create electronics that can respond to human touch, with up to 12 individual sensors. The shield has 12 "figure 8" holes where you can attach cables with alligator clips. Attach one side of the clip to the shield and the other side to something electrically conductive (like metal) or filled with water (like vegetables or fruit!) Then fire up our handy Arduino library to detect when the object is touched. That's it, very simple! For advanced users, you can also solder to a pad for a slimmer & more permanent connection. Works great with any Arduino as it only uses the I2C pins (SCL & SDA). It uses the same chip as our MPR121 12-button capacitive touch sensor breakout, so you can duplicate the library and code! We have examples of touch reading. With an Arduino Leonardo and a little creativity, you can convert touches to key presses (KeyUp/KeyDown) (so you can build a veggie keyboard) or pair with our Music Maker Shield to create an audio player that plays one sound per sensor (fruit drums!) Each order comes with a Capacitive Touch Shield and a stick of 36-pin headers. To attach the pin headers to the shield board, you will need to do some light soldering, but this is easy to do with simple soldering tools like a soldering iron and rosin electronic solder.

ADA2024

€13.75

Sofort verfügbar · 1 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Kunden kauften auch

Battery holder for 4x Mignon AA with push-button connection

Battery holder, 4x Mignon AAwith push-button connectionBattery holder suitable for cells of the type: 4x Mignon (AA)Dimensions: 62 x 16 x 56.5 mmConnection: with push-button connection

€0.50

Sofort verfügbar · 37 Stück · 1-3 days

Battery holder for 4x Mignon AA with push-button connection

Battery holder, 4x Mignon AAwith push-button connectionBattery holder suitable for cells of the type: 4x Mignon (AA)Dimensions: 62 x 16 x 56.5 mmConnection: with push-button connection

11448

€0.50

Sofort verfügbar · 37 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Battery holder for 3x Mignon AA with push-button connection

Battery holder, 3x Mignon AAwith push-button connectionBattery holder suitable for cells of type: 3x Mignon (AA)Dimensions: 57.8 x 16.6 x 48.2 mmConnection: with push-button connectionRoHS-compliant

€0.49

Sofort verfügbar · 89 Stück · 1-3 days

Battery clip for 9V blocks, I-shape, plastic housing

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Battery clip for 9V blocks, I-shape, plastic housing

12483

€0.25

Sofort verfügbar · 23 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

Adafruit Height Metal Caster Bearing Wheel, steel ball bearing, 15.7mm wheel diameter, 20mm high

20mm steel ball roller bearing A durable and smooth-gliding steel ball roller bearing, ideal for robust applications. Perfectly sized for surprisingly smooth movement, it easily attaches to any chassis with two screw mounts. Note that no mounting hardware is included; use 4-40 or M3 screws to mount as desired. Features at a glance Easy to mount: Two screw mounts allow for easy attachment to any chassis. Fluid motion: Provides a surprisingly smooth and fluid rolling motion. Versatile compatibility: Fits perfectly with Lila aluminium chassis for TT engines, but can be used for any application where 20mm height is required. Technical data Wheel diameter: 15.7mm Overall height: 20mm Diameter of the fixed hole (below the roller bearing): 3.1mm Mounting hole diameter: 4mm Distance between the mounting holes: 40mm Total weight: 19.7g Scope of delivery 1x 20mm steel ball roller bearing (mounting materials not included) Notes Fastening materials are not included; use 4-40 or M3 screws of your choice.

€2.15

Sofort verfügbar · 2 Stück · 1-3 days

Adafruit Height Metal Caster Bearing Wheel, steel ball bearing, 15.7mm wheel diameter, 20mm high

ADA3948

€2.15

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

DHT11 Temperature / humidity sensor shield for D1 Mini

€2.70

Sofort verfügbar · 100+ Stück · 1-3 days

DHT11 Temperature / humidity sensor shield for D1 Mini

D1-T11S

€2.70

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

€4.90

Sofort verfügbar · 100+ Stück · 1-3 days

40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

DUPK-SET-20

€4.90

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

BMP280 Breakout Board, 2in1 sensor for temperature and air pressure

€1.60

Sofort verfügbar · 100+ Stück · 1-3 days

BMP280 Breakout Board, 2in1 sensor for temperature and air pressure

GY-BMP280

€1.60

Sofort verfügbar · 100+ Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

IR line tracking sensor with digital output

€1.60

Sofort verfügbar · 2 Stück · 1-3 days

IR line tracking sensor with digital output

KY-033

€1.60

Sofort verfügbar · 2 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten

TTP223 Capacitive touch sensor / push-button

This capacitive push-button is ideal for switching operations without wear or mechanical actuation. The module is simply connected to a supply voltage and outputs a high level via the I/O connection when approached. Thanks to the capacitive mode of operation, the module can also be installed behind objects such as thin glass panels or cabinet doorsTechnical data: Supply voltage: 2.4 - 5.5 voltsDimensions: approx. 15 x 11 mm

€0.40

Sofort verfügbar · 52 Stück · 1-3 days

TTP223 Capacitive touch sensor / push-button

SW223-1

€0.40

Sofort verfügbar · 52 Stück · 1-3 days

Preise inkl. MwSt. zzgl. Versandkosten