Product number: ADA5036 Adafruit

64x32 RGB LED matrix - 2.5mm grid

€44.90

Currently not available

Notify me when the item is available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Privacy

I have acknowledged the and have read and agree to the .

64x32 RGB LED matrix - 2.5mm grid

€44.90

Order now and secure 90 Berrys

Product information "64x32 RGB LED matrix - 2.5mm grid"

Bring a bit of Times Square into your home with this cute 64 x 32 square RGB LED matrix panel. These panels are normally used for video walls. Here in New York, you see them on the sides of buses and bus stops to display animations or short video clips. We thought they looked really cool, so we picked up a few boxes of them from a factory.

This version is the 2.5mm pitch 64x32 RGB LED matrix. Please note that you can't use an Arduino UNO to drive this size, it's way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can display RGB matrices and has sufficient RAM.

This matrix has 2048 bright RGB LEDs arranged on the front in a 64x32 grid. On the back is a board with two IDC connectors (one input, one output: theoretically you can daisy-chain them together) and 12 16-bit latches that allow the display to be driven at a 1:16 sampling rate.

These displays are technically "daisy-chainable" - you can connect one output to the next input - but our Arduino example code doesn't support this (yet). It requires a high-speed processor and more RAM than the Arduino has!

These panels require 13 digital pins (6-bit data, 7-bit control) and a good 5V supply of up to 4A per panel. We recommend a 4A regulated 5V adapter and then connecting a 2.1mm jack. Please have a look at our tutorial for more details!

Scope of delivery:

A single 64x32 RGB panel,
One IDC cable
One pluggable power cable

Please note that these displays are designed to be driven by FPGAs or other high-speed processors: They do not have any built-in PWM control. Instead, you have to keep redrawing the screen to control the whole thing "manually" with PWM. On a 16 MHz Arduino Mega, we managed to generate 12-bit colours (4096 colours) with 40% CPU usage, but this display would really shine if it were controlled by an FPGA, CPLD, Propeller, XMOS or other high-speed multicore controller. The good news is that the display is pre-white balanced with a nice uniformity, so when you switch on all the LEDs, it's not a particularly tinted white.

Of course, we wouldn't leave you with a datasheet and a "good luck!". We have a full schematic and working code for the Arduino library with examples of drawing pixels, lines, rectangles, circles and text. You'll be making your colour pop within an hour! On an Arduino you need 16 digital pins and about 3200 bytes of RAM to buffer the 12-bit colour image.

Zolltarifnummer:	85414300
Brand:	Adafruit
Country of Origin:	China
EAN:	4060137071324
Gross Weight (kg):	0.223
Manufacturer ID:	5036
Product ID:	ADA5036

Adafruit

Adafruit – the open-source hardware pioneer

Adafruit Industries was founded in New York in 2005 by MIT engineer Limor Fried and has since become one of the most influential companies in the maker world. Its mission: making electronics understandable and accessible to everyone – with open-source hardware, free tutorials and a community of millions.

Every Adafruit product is designed, tested and manufactured in the company's own factory in New York. The result is boards and modules that are known for their thoughtful design, excellent documentation and reliable software support – from the Feather ecosystem to the STEMMA QT plug-and-play system.

BerryBase is an official Adafruit reseller. Here you will find genuine products and the expertise to get your project off the ground – whether you are just starting out or developing professionally.

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com

WEEE number: 20453810

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions

Do not expose to direct contact with water or moisture, as this can lead to short circuits.
Only use with the specified operating voltage and power to avoid damage or overheating.
Do not touch the LED module during operation as the surfaces may become hot.
Observe the polarity when connecting to avoid malfunctions.
Keep the module away from children to prevent injury or damage.
Do not use in potentially explosive atmospheres unless the product is certified for this purpose.
Switch off the power supply before cleaning or servicing.
Dispose of defective or damaged modules properly as electronic waste.
Do not carry out any modifications or repairs yourself, as this may cause malfunctions or hazards.
Do not point the LED light directly into the eyes to avoid eye damage.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

64x32 RGB LED matrix - 2.5mm grid

Frequently Bought Together

Description

Product information "64x32 RGB LED matrix - 2.5mm grid"

Properties

Manufacturer

Adafruit

Adafruit – the open-source hardware pioneer

Manufacturer and safety information

Reviews 0

Our recommendations for you

Your account

64x32 RGB LED matrix - 2.5mm grid

Frequently Bought Together

Description

Product information "64x32 RGB LED matrix - 2.5mm grid"

Properties

Manufacturer

Adafruit

Adafruit – the open-source hardware pioneer

Manufacturer and safety information

Reviews 0

Login

Our recommendations for you