Order now and secure 3 Berrys
Description
Product information "4-channel infrared receiver incl. remote control"
This 4-channel infrared receiver can decode the infrared commands sent by the supplied remote control and outputs the corresponding high levels for the individual channels via the pin header.
How it works
By default, LOW levels are present on the pin header of the receiver module.
If one of the channel buttons (CH 1-4) on the remote control is pressed, the corresponding output (OUT 1-4) changes from LOW to HIGH and the corresponding LED (H 1-4) on the receiver board lights up for as long as the channel button on the remote control is pressed. When the red power button on the remote control is pressed, all outputs on the receiver board change from LOW to HIGH and all LEDs light up as long as the button on the remote control is pressed.
Technical data receiver board
Technical data remote control
How it works
By default, LOW levels are present on the pin header of the receiver module.
If one of the channel buttons (CH 1-4) on the remote control is pressed, the corresponding output (OUT 1-4) changes from LOW to HIGH and the corresponding LED (H 1-4) on the receiver board lights up for as long as the channel button on the remote control is pressed. When the red power button on the remote control is pressed, all outputs on the receiver board change from LOW to HIGH and all LEDs light up as long as the button on the remote control is pressed.
Technical data receiver board
- Operating voltage: 3-5V
- Connections via pin header (RM 2.54)
- VCC: Power supply input
- GND: Ground
- OUT1: Output channel 1
- OUT2: Output channel 2
- OUT3: Output channel 3
- OUT4: Output channel 4
- 4 status LEDs for the individual outputs
- Dimensions: 38 x 29 mm
- 2 PCB holes for mounting
Technical data remote control
- Operating voltage: 3V via lithium battery CR2025
- Range: 5 - 8 metres
- Dimensions: 85.5 x 39.5 mm
Scope of delivery
- Receiver board
- Infrared remote control incl. battery
Properties
| Zolltarifnummer: | 85423990 |
|---|---|
| Brand: | Frei |
| Country of Origin: | China |
| EAN: | 4251266707035 |
| Gross Weight (kg): | 0.008 |
| Manufacturer ID: | IRRM-4 |
| Product ID: | IRRM-4 |
Manufacturer and safety information
Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
- Ensure that the product is properly installed and protected against moisture and dust.
- Ensure correct polarity and voltage during installation to prevent damage.
- Do not use in potentially explosive atmospheres or in direct contact with water.
- Replace damaged cables and connections immediately to avoid short circuits or safety risks.
- Keep away from children and unauthorised persons.
- Disconnect the appliance from the power supply for maintenance or repair.
- At the end of its service life, dispose of it in an environmentally friendly manner in accordance with local disposal regulations.
- Do not dispose of electronic waste with household waste, but take it to an appropriate collection point.
- Do not open the device by force to avoid injury and damage.
Reviews
2
Login
2 reviews
8 February 2019 00:00
aeysggthjklö.ätdfrzguiolpöä#...
aeysggthjklö.ätdfrzguiolpöä#
1 February 2019 00:00
a4s56tzuoi0üß97675redtfznjlö...
a4s56tzuoi0üß97675redtfznjlö