2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK21
  • This product is currently not available.
    Please inform me as soon as the product is available again.
    15.03€ *

    including VAT plus shipping costs

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104... more
    "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI, 4-wire SPI
    • Outline dimension: 65mm × 30.2mm
    • Display size: 23.71mm × 48.55mm
    • Dot pitch: 0.229 × 0.228
    • Resolution: 212 × 104
    • Display color: black, red, white
    • Grey level: 2
    • Full refresh time: 15s
    • Refresh power: 26.4mV(typ.)
    • Standby power: <0.17mV
    • Viewing angle: >170°

    Interface


    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    NC NC
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 2.13inch e-Paper HAT (B)
    • RPi screws pack (2pcs)
    • 9-pin 2.54 pitch SMD pinheader

    Dokumentation / Downloads
    Related links to "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Data "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Order number: 3C-RPI-EINK21
    Gross weight (in kg): 0.026
    Manufacturer: Waveshare
    Manufacturer Number: 2.13inch e-Paper HAT (B)
    HS-Code: 84733080
    Country of origin: China
    Read, write and discuss reviews... more
    Customer evaluation for "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    5 29 Aug 2021

    __TS_HEADLINE__

    ausreichend groß passt gut zum Pi-Zero

    3 9 Oct 2018

    __TS_HEADLINE__

    Hatte gedacht und erwartet, dass sich Waveshare etwas mehr um die aktualität der Treiber bemüht...
    Stichwort: WiringPi, bcm2835 & und Kernel (z.B. V4.14)

    Schade...

    5 13 Aug 2018

    __TS_HEADLINE__

    Steckerfertig zu Raspberry Pi. Sehr einfache Montage auf Zero W.

    4.35
    Write an evaluation
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    The fields marked with * are required.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Content 10 Meter (0.13€ * / 1 Meter)
    1.32€ *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Content 10 Meter (0.19€ * / 1 Meter)
    1.92€ *
    Viewed

    Switch to the appropriate shop now

    We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.