10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB

  • WS-19358
  • 18.05€ *

    including VAT plus shipping costs

    Available immediately
    21 piece · 2 - 4 working days

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    Notice

    Frequently Bought Together
    10-DOF IMU Sensor Modul für Raspberry Pi Pico,
    10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB
    18.05€
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4.13€
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0.50€
    Quad GPIO-Expander für Raspberry Pi Pico
    Quad GPIO-Expander für Raspberry Pi Pico
       
    9.98€
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
       
    6.76€
    =
    Total:
    39.42€*
    VAT included. including shipping costs
    Frequently Bought Together
    10-DOF IMU Sensor Modul für Raspberry Pi Pico,
    10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB
    18.05€
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4.13€
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0.50€
    Quad GPIO-Expander für Raspberry Pi Pico
    Quad GPIO-Expander für Raspberry Pi Pico
       
    9.98€
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
       
    6.76€
    =
    Total:
    39.42€*
    VAT included. including shipping costs
    Das Pico-10DOF-IMU ist ein IMU-Sensor-Erweiterungsmodul, das für den Raspberry Pi Pico... more
    "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Das Pico-10DOF-IMU ist ein IMU-Sensor-Erweiterungsmodul, das für den Raspberry Pi Pico spezialisiert ist. Es enthält Sensoren wie Gyroskop, Beschleunigungsmesser, Magnetometer und Barozeptor und verwendet den I2C-Bus zur Kommunikation. In Kombination mit dem Raspberry Pi Pico kann es verwendet werden, um Umgebungsdaten wie Temperatur und Luftdruck zu erfassen oder einen Roboter zu bauen, der Bewegungsgesten und Orientierung erkennt.
    • Standard Raspberry Pi Pico Header, unterstützt die Raspberry Pi Pico Serie
    • Onboard ICM20948 (3-Achsen-Gyroskop, 3-Achsen-Beschleunigungsmesser und 3-Achsen-Magnetometer) zur Erkennung von Bewegungsgesten, Orientierung und Magnetfeld
    • Onboard LPS22HB barometrischer Drucksensor, zur Erkennung des atmosphärischen Drucks der Umgebung
    • Kommt mit Entwicklungsressourcen und Handbuch (Raspberry Pi Pico C/C++ und MicroPython Beispiele)
    Spezifikationen

    Betriebsspannung 5V
    Beschleunigungsmesser Auflösung: 16 Bit Messbereich (konfigurierbar): ±2, ±4, ±8, ±16g Betriebsstrom: 68,9uA
    Gyroskop Auflösung: 16 Bit Messbereich (konfigurierbar): ±250, ±500, ±1000, ±2000°/sec Betriebsstrom: 1,23mA
    Magnetometer Auflösung: 16-bit Messbereich: ±4900µT Betriebsstrom: 90uA
    Barozeptor Messbereich: 260 ~ 1260hPa Messgenauigkeit (normale Temperatur): ±0,025hPa Messgeschwindigkeit: 1Hz - 75Hz

    Raspberry Pi Pico Header-Kompatibilität: Onboard-Buchsenleiste zum direkten Anschluss an Raspberry Pi Pico Stapelbares Design.

    Raspberry Pi Pico ist NICHT im Lieferumfang enthalten.

    Was ist an Bord?
    1. ICM20948 9-achsiger Bewegungssensor, I2C-Bus
    2. LPS22HB Barometrischer Drucksensor, I2C-Bus
    3. RT9193-33 3,3V linearer Spannungsregler
    4. LSF0204PWR 4-Kanal-Spannungswandler
    1. RT9193-18 1,8V linearer Spannungsregler
    2. Leistungsanzeige
    3. Raspberry Pi Pico Stiftleiste zum Anschluss an Raspberry Pi Pico, stapelbares Design
    Dokumente und Downloads
    Related links to "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Data "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Gross weight (in kg): 0.010
    Order number: WS-19358
    Manufacturer: Waveshare
    Manufacturer Number: Pico-10DOF-IMU
    HS-Code: 84733020
    Country of origin: China
    Read, write and discuss reviews... more
    Customer evaluation for "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Write an evaluation
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    The fields marked with * are required.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Content 10 Meter (0.13€ * / 1 Meter)
    1.32€ *
    Viewed

    Switch to the appropriate shop now

    We have determined that you are not in Austria and that we can offer you better shipping conditions for your location in our shop.