Konverter, micro USB Buchse - UART, CP2102

  • MUSB-UART-CP
  • |
  • 712321341860
  • 5,55 €

    inkl. MwSt. zzgl. Versandkosten

    Sofort verfügbar
    102 Stück · 2 - 4 Werktage

    Variante

    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi pro Kunde erlaubt ist.

    Merken

    Wird oft zusammen gekauft:
    Konverter, micro USB Buchse - UART, CP2102
    Konverter, micro USB Buchse - UART, CP2102
    5,55 €
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    8,67 €
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0,50 €
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    1,92 €
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4,13 €
    =
    Gesamt:
    20,77 €*
    inkl.MwSt. zzgl. Versandkosten
    Wird oft zusammen gekauft:
    Konverter, micro USB Buchse - UART, CP2102
    Konverter, micro USB Buchse - UART, CP2102
    5,55 €
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    8,67 €
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0,50 €
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    1,92 €
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4,13 €
    =
    Gesamt:
    20,77 €*
    inkl.MwSt. zzgl. Versandkosten
    Overview The CP2102 USB UART Board (micro) is an accessory board that features the... mehr
    "Konverter, micro USB Buchse - UART, CP2102"
    Overview

    The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

    CP2102 features:
    • Single-Chip USB to UART Data Transfer
      • No external resistors required, no external crystal required
      • On-chip power-on reset circuit and voltage regulator
      • Integrated 1024-Byte EEPROM
    • USB Function Controller
      • USB Specification 2.0 compliant; full-speed (12 Mbps)
      • USB suspend states supported via SUSPEND pins
    • UART
      • All handshaking and modem interface signals
      • Data formats supported:
        • Data bits: 5, 6, 7, and 8
        • Stop bits: 1, 1.5, and 2
        • Parity: odd, even, no parity
      • Baud rates: 300 bps to 1 Mbits
      • 576 Byte receive buffer; 640 byte transmit buffer
      • Hardware or X-On/X-Off handshaking supported
      • Event character support
    • Virtual COM Port Device Drivers
      • Windows 8/7/Vista/Server 2003/XP/2000
      • MAC OS-X/OS-9
      • Linux 2.40 or higher
    • USBXpress Direct Driver Support
      • Windows 7/Vista/Server 2003/XP/2000
      • WindowsCE
    • Temperature Range
      • –40 to +85 °C

    Features
    • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
    • Voltage output support: 5V or 3.3V
    • Integrated USB protection device: SP0503
    • 3 LEDs: TXD LED, RXD LED, POWER LED
    • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
    • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
    How to Use

    In the case of working with a MCU:
    • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
    • GND: connects to GND
    • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
    • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
    • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
    • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
    Note: VCP examples and USBXpress driver program library are provided.


    Package Content
    • CP2102 USB UART Board (micro) × 1
    • 4-pin male pinheader & 4-pin female pinheader × 2
    • 6-pin custom connector jumper wire × 1

    Development Resources
    Weiterführende Links zu "Konverter, micro USB Buchse - UART, CP2102"
    Daten "Konverter, micro USB Buchse - UART, CP2102"
    Gewicht Brutto (in kg): 0.005
    Artikelnummer: MUSB-UART-CP
    EAN: 712321341860
    Hersteller: Waveshare
    Hersteller Produktnummer: CP2102 USB UART Board (micro)
    Zolltarifnummer: 85444290
    Herkunftsland: China
    Bewertungen lesen, schreiben und diskutieren... mehr
    Kundenbewertungen für "Konverter, micro USB Buchse - UART, CP2102"
    Bewertung schreiben
    Bewertungen werden nach Überprüfung freigeschaltet.
    Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

    Die mit einem * markierten Felder sind Pflichtfelder.

    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (0,19 € / 1 Meter)
    1,92 €
    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (0,13 € / 1 Meter)
    1,32 €
    Zuletzt angesehen

    Jetzt zum passenden Shop wechseln

    Wir haben festgestellt, dass Sie sich nicht in Östereich befinden, und wir Ihnen in unserem Shop für Ihren Standort bessere Versandkonditionen anbieten können.